Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.0 LAccepted-AOC | L1 | Accepted-AOC Being L1. | |
| 2 | L2₹39.4 L+₹2.4 L (6.56%)Rejected-Finance R O ABI GUZAR THE BUND SRINAGAR 190001 J K | SRINAGAR | JAMMU AND KASHMIR | 190001 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹40.0 L+₹3.0 L (8.17%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹40.2 L+₹3.2 L (8.76%)Rejected-Finance | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹40.5 L+₹3.5 L (9.57%)Rejected-Finance | L5 | Rejected-Finance Other than L1 |
Tender Value
₹43.5 L
EMD Value
₹87,020
Closing Date
10 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE, HQ 134 Wks Engr
HQ 134 Wks Engr PIN 914 134 c/o 56 APO
PROVN OF MI ROOM WITH PATIENT WAITING HALL AT AWANTIPUR GRN UNDER GE 861 EWS
2022_MES_557623_1
134 WE-51(T)/2022-23
Open Tender
Civil Works
Item Rate
180 days
Srinagar
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE 861 EWS
₹87,020
Yes
16 Mar 2023
13 Oct 2022
12 Nov 2022
13 Oct 2022
10 Nov 2022
28 Oct 2022
14 Oct 2022 - 20 Oct 2022
Amount
Surface excavation not exc 15cm deep and getting out in soft/ loose soil, complete all as specified and directed by Engr-in-Charge.
Excavation in trenches not exceeding 1.50mtr wide and not exceeding 1.50mtr in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc, not exc 10 Sqm on plan and not exc 1.5 mtr in depth and getting out in soft/ loose soil, complete all as specified and directed by Engr-in-Charge.
Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out in soft/ loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm thick, complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick, complete all as specified and directed by Engr-in-Charge.
Removing excavated material to a distance not exc. 50mtr and depositing where directed at level not exc. 1.50mtr above starting point, complete all as specified and directed by Engr-in-charge.
M&L for moorum/ red bajari, filling in floor or pavings, laid in layers not exceeding 15cm thick, spread, levelled and rammed including watering and consolidation, complete all as specified and directed by Engr -in-Charge.
M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation, filling and mass concrete, complete all as specified and directed by Engr-in-Charge.
M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in foundation, filling and mass concrete, complete all as specified and directed by Engr-in-Charge.
M&L for hard core of broken stone or boulder of gauge not exceeding 63mm, deposited, spread and leveled in layers not exceeding 15cm thick, watered and rammed to a true surface, complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection including joints filling, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in sub base of floor, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in kerb stone, roof kerbs or mud stops etc, rounded or camphered on edges including necessary formwork, complete all as specified and directed.
M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base, floor etc, finished the surface fair and even without using extra cement, complete all as specified and directed.
M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in sub base, floor etc., finished the surface fair and even without using extra cement, complete all as specified and directed.
M&L for walling of random rubble masonry with best quality stone, uncoursed, well bonded, bedded and solidly hearted and built in CM 1:6, complete all as specified and directed.
M&L for RCC M-25 Grade (design mix) as in foundation, raft footing, foundation beams, plinth beams, bases for columns etc, basement slabs, under-reamed piles and mass concrete, complete all as specified and directed.
M&L for RCC M-25 Grade (design mix) as in slabs supported on walls, beams, and colomns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.
M&L for RCC M-25 Grade (design mix) as in columns, pillars, piers, post and struts etc, complete all as specified and directed.
M&L for RCC M-25 Grade (design mix) as in roof beams, cantilevers, bressummers, lintels over 1.5 mtr span, complete all as specified and directed.
Formwork to sides of concrete foundations, footings, bases of columns, plinth beams, sides and soffits (if any) of plinth beam and similar work, vertical surfaces for rough finish surfaces of concrete, complete all as specified and directed by Engr-in-Charge.
Formwork to sides of rough finished surface of concrete of square, rectangular or polygonal to sides of columns, pillars etc. complete all as specified and directed by Engr-in-Charge.
Formwork to rough finshed surfaces of concrete of sides and soffits of floor or roof beams, lintel beam, cantilevers, shelves including supports, overhangs etc, complete all as specified and directed by Engr-in-Charge.
Formwork to rough finished surfaces of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed by Engr-in-Charge.
S&F TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engr-in-Charge.
S&F TMT Mild steel bars 5mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engr-in-charge.
M&L for precast cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) hollow block masonry exc. 10cm in width and setting in CM 1:6, complete all as specified and directed by Engr-in-charge.
M&L for brickwork with sub class 'B' bricks, old size, straight or curved on plan exc 6 mtr mean radius, half brick thick wall, built in CM 1:4, complete all as specified and directed by Engr-in-charge.
M&L for brick work with sub class "B" bricks, old size, straight or curved on plan exceeding 6 metre mean radius, built in cement mortar 1:6, complete all as specified and directed by Engr-in-charge.
M&L for rendering 15mm thick in CM 1:6 on brick work or concrete surfaces, finished the surface even and smooth without using extra cement, complete all as specified and directed.
All as per Srl Item No. 29.00 here-in-above but in CM 1:4 with uisng WPC. Note : WPC shall be measured and paid separately under respective item.
M&L for rendering 10mm thick in CM 1:4 on brick work or concrete surfaces, finished the surface even and fair without using extra cement, complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bond distemper over one coat of wall primer over and including 3mm thick wall care putty, complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistance primer, complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm each as in floor, set and jointed in neat cement slurry & pointed in white or colored cement to match the shade of tile, laid/ fixed over and incl 15mm thick screed bed in C:M 1:6, complete all as specified and directed.
All as per ser item No 34.00 here-in-above but work on vertical surface as in skirtings, dados and risers to steps etc, fixed over and including 15mm thick plaster in CM 1:4, complete all as specified and directed.
M&L for glazed ceramic colored tiles of size 350mm x 450mm x 7mm thick, as on vertical surfaces etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 10 thick rendering in CM 1:4, complete all as specified and directed.
M&L for 10mm thick vitrified coloured ceramic tiles (square/ rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.36 Sqm each as in floor, set & jointed in neat cement slurry & pointed in white or colored cement to match the shade of tile, laid/ fixed over & incl 15mm thick screed bed in C:M 1:6, complete all as specified and directed.
M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed at site, complete all as specified and directed.
S&F 35mm thick factory made second class hard wood, plain framed, panelled shutters (any No of panels) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated and fixed at site, complete all as specified and directed.
S&F solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening as per specification & drawing.
S&F 30mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
M&L for preparation of new wooden surfaces or articles of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
S&F aluminium anodised, barrel tower bolt of extruded section, 150mm length of bolt.
S&F 250mm long aluminium alloy anodised sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section, complete all as specified and directed.
S&F 150mm long aluminium alloy anodised sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section, complete all as specified and directed.
S&F butt hinges, medium weight, cold rolled mild steel, size 100mm, complete all as specified and directed.
S&F aluminium handles, cast type, anodised 125mm size, complete all as specified and directed.
S&F aluminium anodised, barrel tower bolt of extruded section, 100mm length of bolt, complete all as specified and directed.
S&F aluminium alloy handles, fabricated type, anodised 100mm size, complete all as specified and directed.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.
S&F vitreous china soap tray embedded in the wall, complete all as specified and directed.
S&F towel rail 600mm long of PTMT, fixed with & including chromium plated brass screws or wooden/ plastic cleats (min weight of towel rail 190gms), complete all as specified and directed.
S&F brass CP mixer for mixing hot & cold water, screwed down for 15mm bore iron pipe and fixed, complete all as specified and directed.
M&L for 20mm bore GI tube medium grade with all fittings, laid in trenches, under floor, ceiling or fixed to wall, complete all as specified and directed.
M&L for 15mm bore GI tube medium grade with all fittings, laid in trenches, under floor, ceiling or fixed to wall, complete all as specified and directed.
M&L for 25mm bore GI tube medium grade with all fittings, laid in trenches, under floor, ceiling or fixed to wall, complete all as specified and directed.
S&F 75mm bore PVC (SWR) floor trap, plain with grating including solvent, complete all as specified and directed.
S&F 75mm bore PVC (SWR) vent cowl, complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laid, in trenches or floor or fixed on wall with suitable MS clamps, complete all as specified and directed.
S&F 110mm bore PVC (SWR) vent cowl, complete all as specified and directed.
S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or floor, complete all as specified and directed.
S&F 110mm bore PVC (SWR) bend, complete all as specified and directed
S&F rotational moulded polyethylene water storage tank (triple layered) cylindrical vertical with closed top of capacity 500 litres, hoisted and fixed in position with connecting ports (inlet, outlet and over flows) and including 20mm bore ball brass valve, complete all as specified and directed by Engr-in-charge.
S&F vitreous china wash hand basin, white, flat back of size 550x400mm including brackets & including cutting for and pinning in ends of brackets and making good in CM 1:4 and including 32mm dia CP waste coupling and waste pipe of 32mm bore, complete all as specified and directed.
S&F 20mm bore gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.
S&F 15mm size PVC connection with PTMT nuts, length 600mm long, complete all as specified and directed.
S&F vitreous china white wash down water closet pan (pedestal pattern), white with plastic water closet seat cover and 'P' or 'S' trap including connection to drain or outgoing pipe and to PVC flush pipe, antisyphonic pipe, 10 Ltrs capacity PVC flushing cistern low level, valve less, symphonic action type complete with inlet ball valve including brackets for flush tank, 32mm dia PVC flush pipe, PVC connection 15mm dia and 450mm long with PTMT nuts and including MS chromium plated hinging device, complete all as specified and directed.
S&F 15mm bore stop/angle valve, cast copper alloy CP, fancy type, high presure with butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.
S&F Health faucet (ABS Body) mild steel chromium plated, suitable for 15mm bore pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed.
S&F 15mm bore bib tap, cast copper alloy, CP, fancy type with crutch or butterfly handle, screwed down, screwed for brass ferrule, complete all as specified and directed.
M&L for vitreous China bowl urinal flat back of size 465 x 355 x 265mm white (minimum) with grating and union for discharge pipe with urinal spreader of PTMT any colour for fixing with 15mm dia pipe (minimum weight 60gms) and including 32mm dia waste pipe, complete all as specified and directed.
S&F sink with drainage board, made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.
M&L for hardcore of broken stone or boulders of guage exc 63mm but not exc 100mm, deposited, spread and levelled in layers not exc. 15cm thick, complete all as specified and directed.
M&L for hardcore of broken stone or boulders of guage exc 63mm, deposited, spread and levelled in layers not exc. 15cm thick, complete all as specified and directed.
Rolling over hardcore surface with 8 to 12 ton power roller, not exc 150mm compacted thickness, complete all as specified and directed.
M&L for sand filling under floors or in foundations including spreading, leveling, watering and consolidation, complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block with grey cement and pigment of any size, confirming to IS 15658-2006 of 80mm thickness M-40 Grade, complete all as specified and directed.
S&F mild steel work in tubular trusses including special shaped washer complete using ERW or induction butt welded tubes conforming to IS-1161-1979, Grade ST-240, complete all as specified and directed.
M&L for mild steel work in roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections, post) including distance pieces, cleats etc, conforming to Fe-290 Grade E-165, complete all as specified and directed.
S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based corrugated steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based plain steel sheet of an colour having tensile strength of 550 Mpa as in ridges, hips, valley etc, fixed with self tapping screws, complete all as specified and directed.
M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.
M&L for 2nd class soft wood plain fillets, clean sawn, square, rectangular or triangular in section of size exc 13 Sqcm but not exc 25 Sqcm, secured with nails or brads, complete all as specified and directed.
M&L for 2nd class soft wood plain fillets, clean sawn, square, rectangular or triangular, wrought, secured with nails or brads, cross sectional area exc 6 Sqcm but not exc 13 Sqcm, bull nose, splayed, chamfered or rounded on one edge or face, complete all as specified and directed.
M&L for 6mm thick plywood grade BWR, type BB, fixed in ceiling, flat or sloping with nails to timber frame work, complete all as specified and directed.
S&F Powder coated aluminium frame for windows, ventilators & sliding shutter with triple track (02 Nos Glazed shutter and 01 Gauzed shutter) including necessary aluminium mongareies such as locking arrangement, rubber gasket, jointing cleat for fixing etc, complete all as specified and directed.
S&F powder coated aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junction stop and bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight metered and jointed mechanically where ever required including cleat angle, aluminium snap beading for glazing/ panelling, CP brass/ stainless steel screws, complete all as specified and directed by Engr-in-Charge.
S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc., complete all as specified and directed.
S&F 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed.
S&F 4mm thick tinted glass, ordinary quality and glazing with aluminium beading in square exc 0.50 Sqm in each pane, complete all as specified and directed.
S&F 4.8mm thick sheet glass, ordinary quality and glazing with aluminium beading in square exc 0.50 Sqm in each pane, with 'U' shaped opening cut on the glass & edges of cutting grinded to smooth finish, fixed as in counter , complete all as specified and directed.
S&F 3.0mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads in square not exc 0.50 Sqm in each pane, complete all as specified and directed.
S&F door closer hydraulically regulated, designation No. 3, universal type, aluminium (extruded section body), suitable for door shutters of 851mm to 1000mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.
M&L for chequered cement concrete tiles of size 20cm x 20cm x 25mm thick, as in floor, set jointed and pointed in neat cement slurry laid over and including 15mm thick screed bed or bedding layer in CM 1:6, complete all as specifed and directed.
S&F 25mm bore gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.
Cutting existing CI/ GI pipe 50/80mm bore inserting of tee including run lead joints of suitable size with necessary fittings, complete all as specified and directed.
M&L for 150mm bore reinforced concrete pipes, class NP3, laid in trenches and jointed, complete all as specified and directed.
M&L for 300mm bore reinforced concrete pipes, class NP2, laid in trenches and jointed complete with collar, complete all as specified and directed.
M&L for PCC 1:3:6, type C-2 (using 40mm graded crushed stone aggregates) as in bed to drain pipes of 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specifed and directed.
Supply only integral water proofing compound (ISI Marked) of approved make.
M&L for PCC 1:2:4, type B-1, (using 20mm graded crushed stone aggregate) as in surface channels and drain etc, complete all as specified and directed.
Extra forming for fair finished drain or drain channel 30cm inner girth in cement concrete using extra cement including forms, mouds, mitred stopped ends etc, complete all as specified and directed.
M&L for flush pointing in CM 1:4 to random rubble masonry, uncoursed or brought upto courses, complete all as specified and directed.
Extra over stone walling for hammer dressing to face of stones and dressing of face beds and joints, as specified of random rubble walling, uncoursed or brought upto courses with maximum depression face from straight edge held against the dressed surface not exc 20mm on granite or trap stone, complete all as specified and directed.
M&L for precast RCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including formwork, set in CM 1:4, complete all as specified and directed.
Construction of soakage well, excavation in soft/ loose soil, foundation PCC 1:3:6, walls of honey combed and soild in M-25 Grade (Design mix) concrete, including intercepting screen chamber, brick work in CM 1:4, RCC cover slab in M-25/SFRC cover inter connecting pipes of RCC/ DWC complete, filled with RR masonary filling with brick bats, complete of size 1.20mtr dia and 4.5mtr deep as shown in drg, complete all as specified and directed.
Construction of LLDP septic tanks, exc in soft/ loose soil, foundation in PCC 1:4:8, brick work in CM 1:4, RCC (1:1.5:3) slab covers including RCC precast manhole cover having 6mm plate embedded all around/ fibre reinforced cover with angle iron frame vent shaft and sludge chambers etc, complete for 25 users, complete all as specifed and directed.
M&L for concealed point wiring for one light/ fan point controlled by one switch with 1.5 Sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 Sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including PVC concealed conduit medium grade of suitable size run with all fittings (ISI marked) controlled by one switch including CI/ MS/ modular sunken box of required size and as directed by Engr-in-Charge, including cutting chases to wall making good the disturbed surfaces to match with the existing specification, complete all as specified and directed.
All as per Ser item No 110.00 above, but for one 3 pin 5 Amp socket outlet on the independent board.
All as per Ser item No 110.00 above, but for one 5 Amp socket outlet on the same board, controlled by one switch.
All as per Ser item No 110.00 above, but for 3 pin 15 Amp socket outlet on the independent board with 2.5 Sqmm PVC FRLS insulated unsheathed copper conductor cable.
S&F modular switch, one way, 6 Amp, 1 module, complete all as specified and directed.
S&F modular switch, one way,16 Amp, 1 module, complete all as specified and directed.
S&F modular socket, 6 Amp, 2/ 3 pin combined, 2 module, complete all as specified and directed.
S&F modular socket, 6/ 16 Amp, 2/ 3 pin combined, 2 module, complete all as specified and directed.
S&F modular step type regulator, 120 W, 2 module, complete all as specified and directed.
S&F modular white cover plate with frame, 2 module, complete all as specified and directed.
S&F modular white cover plate with frame, 3 module, complete all as specified and directed.
S&F modular white cover plate with frame, 4 module, complete all as specified and directed.
S&F modular white cover plate with frame, 6 module, complete all as specified and directed.
S&F modular white cover plate with frame, 8 module, complete all as specified and directed.
S&F ceiling rose, 3 phase, PVC polycarbonate isolated body, complete all as specified and directed.
S&F lamp holder (Agnular/ straight) insulated body with back plate, suitable for batten fittings, complete all as specified and directed.
S&F LED lamp 10 watts, complete all as specified and directed.
S&F decorative ultra slim linear LED 20 watt 4' long lighting fixture with extruded heat sink, environment friendly, energy efficient ready to use pack including LED tube complete with inbuilt electronic driver, PCB, connector block etc, including connecting up three copper flexible cable from ceiling rose to, complete all as specified and directed.
S&F LED bldg security light fitting 35 Watt, 230 Volt, AC with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and directed.
S&F sheet metal enclosure, vertical type, triple pole and neutral, AC, 415 volts, 4 way with 200 Amps rated copper bus bar and IP-43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/ colour washing/ distempering etc to match the existing surfaces, complete all as specified and directed.
S&F sheet metal enclosure, factory made, double door shutter type for DB SPN, 240 Volts, 8 ways with 200 Amps rated bus bar, neutral link, earth bar, complete all as specified and directed.
S&F MCCB, 4 pole, 63 Amps, AC, 415 V, 25 KA, complete all as specified and directed.
S&F 240V, 10 KA 'B' 10 KA MCB of single pole and current carrying capacity 5 to 32 Amp complete all as specifeid and directed.
S&F MCB, SPN, AC, 240 volts, 'B' series capacity 32 Amps,10 KA, complete all as specified & directed.
M&L for earthing complete with galvanised mild steel earth plate electrode of size 60cmx60cmx6mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of the plate not less than 1.5mtr below normal GL, MS earth plate connected to GI wire 4mm dia by means of lug, nuts, bolts, check nut and washer of galvanised iron or steel, GI light grade protection pipe 15mm bore upto 7.5mtr length all as shown in elect plate No 3 od SSR part I connecting to main switch board/ main DB's including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe and funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B-1 duly reinforced with MS bars 6mm dia at the rate of 150mm centre to centre both way with suitable lifting handle and pit/ chamber in PCC 1:3:6 type C-1, angle iron 40x40x5mm frame for pit cover including testing on completion, complete all as specified or indicated including testing after completion.
S&F exhaust fan 300mm sweep PVC body with louver, 240 volts AC single phase, 50 Hz, ISI marked including necessary work in wall/ sheet including connection cable, nut bolts and other fixing material, complete all as specified and directed.
S&F ceiling fan 1200mm sweep, coper winding, double ball bearing with aluminium blade set of 3, length of down rod not less than 300mm single phase, 240 volts ISI marked including connection with three core copper wire etc, complete all as specified and directed.
S&F electric water heater vertical type, stationary storage type of 25 ltr capacity having S/S inner vessal, five star rating, ISI marked, close/ vented type (star marked), 240 volts with heating element and autocut thermostate, including fixing arrangements nut bolts, washers/ fasteners and fishing work etc complete as per existing surface, complete all as specifeid and directed.
M&L for sub main wiring with two single core PVC insulated FRLS cable with copper conductor unsheathed cable of size 2 x 6 Sqmm drawn through in and including PVC concealed with 1 x 6 Sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC conduit 25mm dia, complete all as specified and directed. Note : Two run of single core PVC insulated cable with copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated copper conductor single core, one run of PVC conduit shall be measured as single run.
S&F sheet metal enclosure with socket plug top and MCB single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps, complete all as specified and directed.
Supply, laying, testing and commissioning XLPE PVC insulated, screened PVC bedded, galvanised steel strip or wire armoured electric power cable, heavy duty with aluminium conductor 1100 Volts grade of size 50 Sqmm 3.5 Core , laid in trenchesor/ fixed on poles, complete all as specified and directed.
M&L for dry river sand, laid in trenches for cable protection, as 15cm thick below the cable and 8cm thick above the cable, complete all as specified and directed. Note :- Punned thickness of sand shall be measured & paid.
M&L for sub class 'B' brick covering protection to the eletric cable, laid dry, flat, transversally along the length of cable on sand cushioning with width equal to length of brick, complete all as specified and directed.
Dismantling steel poles, any size, complete all as specified and directed.
Dismantling cross-arms of M.S. channel or angle sections etc. complete and setting aside for re-use, complete all as specified and directed.
Dismantling insulators of any type and any size, complete all as specified and directed.
Refixing of steel tubular LT pole with cross arms insulator and including excavation, earth work, PCC 1:3:6, type C-2 and coping in PCC 1:2:4 type B-1, complete all as specifed and directed.
S&F GI tube, 50mm bore, light grade with and including one coat of red oxide primer and painting two coats of synthetic enamel paint, fixed to walls/ poles with MS clamps of suitable size or laid in trenches for cable protection, complete all as specifeid and directed.
M/S GASSI CONSTRUCTION AND CO
NAJAR ENTERPRISES
M/S MATOO INFRASTRUCTURES PVT. LTD.
M/S AKMAL CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .