PERIODICAL SERVICES TO MD ACCN AT NEW SAFILGUDA ORS AND JCO ACCN NEW ASSEY LINE AND REPAIR/MAINT OF SEWAGE LINES SEPTIC TANKS FITTER BED MAN HOLES REPAIRS OF DRAINSWALLS FENCING ETC AT MH UNDER AGE B/R (S) NO I OF GE (SOUTH) SECUNDRABAD

Amount

M&L Preparation of old surfaces of walls and applying one coat of white wash complete all as specified.

M&L Preparation of old surfaces of ceilings and applying one coat of white wash, complete all as specified.

Washing, rubbing down and stopping of old distempered surfaces of walls and applying one coat of oil emulsion distemper,complete all as specified.

Washing, rubbing down and stopping of old distempered surfaces of ceiling and applying one coat of oil emulsion distemper, complete all as specified.

M&L for complete removal of existing treatment on wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over two coats of wall care putty complete all as specified and directed.

M&L Preparation of old surfaces of walls and applying one coat of cement based paint, including external scaffolding work.complete all as specified

M&L Complete removal of existing treatment, preparation of surfaces and applying two coats of cement based paint over a coat of primer complete all as specified.

M&L Preparation of old painted steel surfaces exc. 10cm in width and girth and applying one coat of synthetic enamel paint,complete all as specified.

M&L Preparation of old painted wooden surfaces exc. 10cm in width and girth and applying one coat of synthetic enamel paint, complete all as specified.

M&L Applying one coat of exterior emulsion paint (weather proof) ACE paint or equivalent on old treated wall surfaces complete all as specified.

M&L Applying french polishing on old or new wooden surfaces of any description including cleaning and preparing the sufface including a coat of wood filler complete all as specified.

M&L Writing letters or figures (Block, Roman, Italic or Indian) not exc 30cm height with white colour synthetic enamel writing paint on circular or rectangular black back ground of suitable size complete all as specified and directed.

Making arrangement of scaffolding in buildings, cutting of small trees/plants at the stem, removal of the roots of the plants by using acids, cutting around the spot for removing the roots any size and making good with cement mortar 1:3 or with PCC 1:2:4 including finishing to match with existing surfaces complete all as directed by Enginner-in-charge.

Taking down cement plaster on walls any description including raking out joints, hacking for key and scrubbing down with water etc, complete all as specified.

M&L Rendering 15mm thick in CM (1:6) on internal surfaces of walls on brick/stone masonry/ concrete surface or brickwalls finished even & smooth without using extra cement.

M&LRendering 15mm thick in CM (1:4) mixed with water proofing compound on external surfaces of walls on stone masonry/concrete surface or brick walls finished even & smooth without using extra cement. Note : WPC shall be measured & paid seperately

Supply only integral water proofing compound.

M&L Rendering 10mm thick in CM (1:3) on ceiling surfaces of concrete surface finished even & smooth without using extra cement.

M&L Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified.

M&L Preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified.

Preparation of newly plastered surfaces of walls and applying three coats of white washing complete all as specified.

M&L Preparation of newly plastered surfaces of ceiling and applying three coats of white washing complete all as specified.

M&L Hacking out old broken glass (any thickness, size quality or description) from wooden frames or steel frames of stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square panels or with wooden bead not exceeding 0.5sqm each pane complete all as specified.

All as per item No 24 above but pin headed or figured glass.

M&L for Cleaning of all blockage of any type of sewage line ie branch sewer line, main sewer line etc, manholes of any section and depth, any situation by way of cleaning/disludging manholes by using any type of manually,mechanically or by way of any other suitable means including foreign materials as well as rodding of sewer lines and between successive block manholes where required and ordered by Engineer-in-charge and keeping the sewage line functional cleaning trap,water closet,soil waste/vent pipe,gully traps upto final drop out let into septic tanks or central sewage system treatmenting in other adjoining Zone/Area of into sewage well (working in foul condition with taking precautionary measures) equipment as required or applicable all as specified and directed. manholes of any size and depth and removing the sludge/material and depositing outside the MOD land complete all as directed by Engr-in-Charge.

Mechanically pumping out sewage and Cleaning and de-sludging of existing septic tanks/ deep manholes up to 3 metre deep including taking out sludge in any form alongwith all other foreign materials by mechanical equipment or manually or by way of any other suitable means including removal of sludge and other foreign materials out side the MD land by any means complete(working in foul condition) all as specified and directed.

Surface dressing not exceeding 15 cm deep in any type of soil

Demolition brick work or stone / boulders masonry built in cement mortar including all quions, arches pillars etc.

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for.

M&L Precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in cover slabs set in cement mortar 1:6.

M&L Plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in foundations

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6M mean radius built in CM 1:6 as in manhole etc complete all as specified

M & L for MS deformed or twisted bars of 6 to 8mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed) not lessthan 0.90mm dia or securing with clips

Excavation in trenches in hard dense soil not exceeding 1.5m wide and n exc 1.5m deep for foundations, sewage lines, manholes etc not exceeding 10 Sqm on plan and getting out.

Returning, filling in with approved soil obtained from excavation including spreading levelling, watering and well ramming in layers n.exc. 25cm thick.

Removing excavated surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as directed.

Demolition and breaking up of drain pipes (Salt glazed ware, AC or reinforced concrete) 200mm internal dia of pipe set in cement mortar.

Demolition and breaking up of drain pipes (Salt glazed ware, AC or reinforced concrete) 150mm internal dia of pipe set in cement mortar.

Demolition and breaking up of drain pipes (Salt glazed ware, AC or reinforced concrete) 100mm internal dia of pipe set in cement mortar.

S&F Reinforced concrete pipes 200mm dia, class NP2, laid and jointed in CM 1:1 complete with coller complete all as specified

S&F Reinforced concrete pipes 150mm dia, class NP2, laid and jointed in CM 1:1 complete with coller complete all as specified

S&F Reinforced concrete pipes 100mm dia, class NP2, laid and jointed in CM 1:1 complete with coller complete all as specified

M&L SWG drain pipe grade 'A' of 100 mm internal dia laid in trenches and jointed in cement mortar including demolition of old pipe complete all as directed.

M&L SWG drain pipe grade 'A' of 150 mm internal dia laid in trenches and jointed in cement mortar including demolition of old pipe complete all as directed.

M&L SWG drain pipe grade 'A' of 200 mm internal dia laid in trenches and jointed in cement mortar including demolition of old pipe complete all as directed.

M&L Concrete bed to drain pipes of 200mm bore in PCC 1:3:6 type C2 using 40mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified

M&L Concrete bed to drain pipes of 150mm bore in PCC 1:3:6 type C2 using 40mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified

M&L Concrete bed to drain pipes of 100mm bore in PCC 1:3:6 type C2 using 40mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified

Plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in coping and benching for man holes and haunching around man holes frame for setting including weathering slightly rounded or chamfered angles and throating including necessary form work.

M&L extra for forming fair finished drains or channel of 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc

Cutting into existing manholes for connecting new 200mm dia drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required .

Cutting into existing manholes for connecting new 150mm dia drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required .

Cutting into existing manholes for connecting new 110mm dia drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required .

Dismantling of fencing wire mesh of any type

Dismantling posts or struts (wood, steel or RCC) any section including taking out embeded portion and making good disturbed ground, posts embeded in natural ground

Excavation in post holes each not exceeding 0.50cum, getting out in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm watering and ramming surplus soil to a distence not exceeding 50m and making good surface.

S&F posts and struts in fencing, hand rails, half round other stock section including cutting tops to shape as directed, drilling, holes notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling , bolting or riveting etc and similar work conforming to Fe 290 Grade E-165

M & L for two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description over 10cm width or girth including preparation of new surfaces.

M&L for PCC1:4:8 type D2 by using 40mm graded aggregate as in foundations, filling and mass concrete

M & L for MS Round bars of 10 mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not lessthan 0.90mm dia or securing with clips

Fixing only chain link fencing including line wires to any type of standards, rails, straining bolts etc including provision of binding wire.

Supply only chain link mild steel galvanised fencing any size or type.

Demolition of cement concrete in ground floors and paving n.exc 15cm thickness (below & above ground level)

M&L 75mm thick PCC type C2 1:3:6 (using 40mm graded stone aggregate) as in pavings and plinth protection finishing the surfaces even and smooth without using extra cement complete all as specified

M & L for 75mm thick cement concrete type D2 , 1:4:8 (40mm graded aggregate) as in sub base complete all as specified

M & L for 25 mm thick cement concrete type B-0 . 1:2:4 (12.5mm graded aggregate) for floor finishes complete all as specified

M&L screed bed or bedding layer for laying floor finishes with 15 mm thick in cement mortar 1:6, complete all as specified

M&L Chequered cement concrete tiles with grey/coloured cement and no pigment, 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed

M&L for Sand filling under floors or in foundation including watering and consolidation

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade With grey cement and pigments.

M&L 100mm thick PCC 1:2:4 type B-1 by using 20mm graded aggregate of as in PCC path/hard standing path etc including finished the surface even and smooth without using extra cement

radhika enterprises

G SATISH REDDY AND CO

ATUL ENTERPRISES

G RANGA RAO

BEEGEE DESIGN SYSTEMS

M/s RAMA LAKSHMI CONSTRUCTIONS

SAI RUPA CONSTRUCTIONS