PROVISION OF CERTAIN OTM ACCN FOR STATIC WKSP EME MHOW

Amount

SCHEDULE "A"

SCHEDULE "A" PART-I (Building Work) Lump sum price worked out by the contractor for 'Building Work' as listed in Schedule 'A' Part-I against the lump sum price inserted by the MES.

Sch 'A' Part-II (Internal Water supply) Lump sum price worked out by the contractor for Internal Water supply) as listed in Schedule 'A' Part-II against the lump sum price inserted by the MES.

Sch 'A' Part-III (Internal Electric Supply) Lump sum price worked out by the contractor for 'Internal Electric Supply' as listed in Schedule 'A' Part-III against the lump sum price inserted by the MES.

Sch 'A' Part-IV (External Water supply) Lump sum price worked out by the contractor for 'External Water supply' as listed in Schedule 'A' Part-IV against the lump sum price inserted by the MES.

Sch 'A' Part-V (External Electrification and Lightening Protection) Lump sum price worked out by the contractor for'External Electrification lightening' as listed in Schedule 'A' Part-V against the lump sum price inserted by the MES.

Sch 'A' Part-VI (Road, Path and Hard standing) Lump sum price worked out by the contractor for 'Road Path and Hard standing' as listed in Schedule 'A' Part-VI against the lump sum price inserted by the MES.

Sch 'A' Part-VII (Sewage Disposal) Lump sum price worked out by the contractor for 'Sewage Disposal ' as listed in Schedule 'A' Part-VII against the lump sum price inserted by the MES.

Sch 'A' Part-VIII (Area Drainage) Lump sum price worked out by the contractor for 'Area Drainage ' as listed in Schedule 'A' Part-VIII against the lump sum price inserted by the MES.

Sch 'A' Part-IX (Demolition) Lump sum price worked out by the contractor for Demolition) as listed in Schedule 'A' Part-IX against the lump sum price inserted by the MES.

Sch 'A' Part-X (Fencing and Gate / Compound Wall) Lump sum price worked out by the contractor for 'Fencing and Gate / Compound Wall' as listed in Schedule 'A' Part-X against the lump sum price inserted by the MES.

Sch 'A' Part-XI (Protective Work) Lump sum price worked out by the contractor for 'Protective Work' as listed in Schedule 'A' Part-XI against the lump sum price inserted by the MES.

Sch 'A' Part-XII (Rrain Water Harvesting) Lump sum price worked out by the contractor for 'Rrain Water Harvesting' as listed in Schedule 'A' Part-XII against the lump sum price inserted by the MES.

Sch 'A' Part-XIII (Hot Water Supply) Lump sum price worked out by the contractor for 'Hot Water Supply' as listed in Schedule 'A' Part-XIII against the lump sum price inserted by the MES.

Sch 'A' Part-XIV (Arboriculture) Lump sum price worked out by the contractor for 'Arboriculture' as listed in Schedule 'A' Part-XIV against the lump sum price inserted by the MES.

Sch 'A' Part-XV (Site clearance, excavation & earth works) Lump sum price worked out by the contractor for 'Site clearance, excavation & earth works' as listed in Schedule 'A' Part-XV against the lump sum price inserted by the MES.

Note for Srl No 2 to 16 The percentage above / below the SSR -2020 (part-II) rates shall be derived from the amount quoted by the contractor against Srl No. 2 to 16 by comparing it with the amount inserted / pre- priced by the department and the same shall be applicable for the items of respective schedule

Schedule 'A' Part-XVI (Miscellaneous works)

Item No 01 : M &L for 2.5 mm thick & n.exc 10 cm thick painting to road surfaces as in lines, cashes, arrows, letters, zebra crossing etc on roads, pavements and the like etc. With thermoplastic road marking ant inlcl applying type –II glass beads dispensed from the in built while the painting surfaces are hot by mechanical mean including cleaning surfaces complete all as specified and as directed. NOTE:- Application shall be carried out through mechanical appliances by the approved applicator of the manufacturer of paint.

Demolition(E/M)

Item No 02 : Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Item No 03 : Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed.

Water Cooler

Item No 04 : Supply and fixing self contained drinking water cooler partially stainless steel working with non CFC refrigerent of above 3 star rating suitable for operation on 230 Volts 50 cycles AC supply having approx storage and nominal cooling capacity 40/80 Ltrs incl connecting the items complete all as specified and directed.

Item No 05 : Supply and fixing self contained drinking water cooler partially stainless steel working with non CFC refrigerent of above 3 star rating suitable for operation on 230 Volts 50 cycles AC supply having approx storage and nominal cooling capacity 60/120 Ltrs incl connecting the itemes complete all as specified and directed.

Item No 06 : Supply and fix voltage stablizer for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 170 volts to 250 volts with out put voltage stablized at 230 volts with accuracy of + 2.5% and capacity 2 KVA suitable for above water cooler complete all as specified and directed.

Desert Cooler

Item No 07 : Supply and fixing heavy duty desert cooler min 4500 cum/hrs (peak) 3200 cum/hr (avg) with PVC body directional front grills of suitable size heaving air throw min 60 feet, submersible pump anti bacterial technology pads, with 3 level speed control, with ice chamber, turbofan technology with castor wheels, bottom water tank capacity not less than 80 litres complete all as specified and directed Note: Contractor shall provide warranty of 02 years for product & pump and is liable for defect rectification during this period.

Refrigeration

Item No 08 : Supply and Installation, commissioning of Refrigerator electric driven single phase having capacity 205 ltrs (or nearest higher standard size) frost free working with non CFC refrigirent and above 5 star rating.

Item No 09 : Supply and fix voltage stablizer for automatic operation, single phase naturally air cooled indoor type and designed for inpur variation between 170 volts to 250 volts with out put voltage stablized at 230 volts with accuracy of + 2.5% and capacity 1.0 KVA suitable for Refrigerator complete all as specified and directed.

Air Conditioning

Item No 10 : Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and ISEER 5 of capacity 1.50 TR working with non CFC refrigirent complete all as specified.

Item No 11 : Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and ISEER 5 of capacity 2.0 TR working with non CFC refrigirent and complete all as specified.

Item No 12 : Supply and fix voltage stablizer for automatic operation, single phase naturally air cooled indoor type and designed for inpur variation between 170 volts to 250 volts with out put voltage stablized at 230 volts with accuracy of + 2.5% and capacity 5 KVA suitable for A/C complete all as specified.

EOT Crane

Item No 13 : Design ,Supply, installation, testing and commissioning of electrically operated, overhead travelling EOT crane of capacity 5 Ton, conforming to IS : 807(latest revision) and 3177 (latest revision), with span 11.5 mtrs (approx), height of lift 6.5 mtrs (required height of hook from FFL =min 6.5 mtrs), travel length 20.4 mtrs (approx), suitable for operation on 415 Volts, 3 Phase, 4 wires, 50 HZ supply, double girder box type, with necessary steel supporting structures with hoist speed 3.0 metres per min, cross travel speed 15.0 metres per min, long travel speed 20 metres per min with micro speeds through VVVF drives of suitable capacities with control panel, power and controlling cables, confirming to relevant IS, controlled by pendent push button station with and including of dia steel rope 12mm dia 4 Falls. Operation system hoist / cross travel/ long travel / electrically operated with pendent including/ Crane Girder/ Gantry Girder, CT rail etc with other connected items required for crane as designed by OEM, Festoon System. (location : Repair A Vehicle)

Item No 13 A: All as per Item No 13 Above, But for 5.0 Tonne capacity, Span – 10.0 Mtr, Bay Length – 19.90 Mtr , Hook Lift 6.50 Mtr (required height of hook from FFL =min 6.5 mtrs )and Wire rope 12 mm Dia x 4 Fall. (location : Repair B Vehicle)

Item No 13 B: All as per Item No 13 Above, But for 2.0 Tonne capacity, Span - 10.0 Mtr, Bay Length - 19.90 Mtr , Hook Lift 6.50 Mtr (required height of hook from FFL =min 6.5 mtrs) and Wire Rope 8.0 mm Dia x 4 Fall (location : Repair B Vehicle)

Item No 13 C: All as per Item No 13 Above, But for 2.0 Tonne capacity, Span - 12.0 Mtr, Bay Length - 15.80 Mtr , Hook Lift 6.50 Mtr (required height of hook from FFL =min 6.5 mtrs )and Wire Rope 8.0 mm Dia x 4 Fall (location : Field gun)

Item No 14 : M & L Earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised iron earth strip of size 32x6 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length , 40mm GI pipe heavy grade for protection of GI Strip and 20mm GI pipe heavy grade for watering with wire mesh and funnel including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 3, connected to earthing test point complete including testing on completion all as specified.

External Water Supply

Item No 15 : BLANK

Item No 16 : Supply, installed, testing & commissioning for Fire pump diesel engine driven horizontal and suction, centrifugal type conforming to IS-12469 1988 with CI casing bronze impeller and stainless steel shaft mounted on heavy duty bearing suitable for continuous operation with range of operation ' 0% to 150%' of rated capacity for 440V, 3 phase, 50Hz, 40m Head , 2280 LPM discharge including starter and cover shade of suitable size as per technically approved by GE for DED pump as specified and as directed.

Item No 17 : M & L for Construction of brick masonry valves pits, of the following valves pits, of size 900mm x 900 mm x 900 mm (internal dimension) with brick masonry built in cement mortar 1:4 including 15 mm thick plastering in CM (1:4) internal and external surface of chamber including angle iron frame with MS sheet cover 3.15mm thick and locking arrangement including applying two coats of synthetic enamel paint over a coat of primer including all necessary excavation and earth work PCC work 1:4:8 type D2 foundation concrete 100mm thick complete all as specified and as directed.

Item No 18 : M & L for Construction of brick masonry valves pits, of the following valves pits, of size 600mm x 600 mm x 600 mm (internal dimension) with brick masonry built in cement mortar 1:4 including 15 mm thick plastering in CM (1:4) internal and external surface of chamber including angle iron frame with MS sheet cover 3.15mm thick and locking arrangement including applying two coats of synthetic enamel paint over a coat of primer including all necessary excavation and earth work PCC work 1:4:8 type D2 foundation concrete 100mm thick complete all as specified and as directed.

Item No 19 : M&L for Booster pumps set with motor for 440 V, 3 Phase, 50 Hz confirming to IS-12469 : 1988 with CI Casing bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for 440 volts, 3 phase, 50 Hz 30m head, 450 LPM discharge with suitable capacity starter which include single phase preventer and motor protection relay complete including fixing on foundation with suitable nut bolts washers including suction and discharge line and cover shade of suitable size as per technically approved by GE of complete all as specified and directed

Item No 20 : Supply, laying and testing of centrifugally cast (Spun) ductile iron pressure pipe Class K-7 pipes duly applied with zinc coating with finishing layer of bitumen on external surfaces and cement mortar lining with bituminous seal coat on internal surfaces complete confirming to IS-8329 (2000), in and including rubber gasket, necessary fittings (tee, collar, tail piece, bend etc) complete all as specified and directed by engineer-in-charge at site of following sizes.

(a) 100 mm (4") dia. (for Static water Tanks)

(b) 80 mm (3") dia. (for fire hyderent connections)

External Electrical Supply

Item No 21 : M&L XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavyduty) with stranded aluminium conductor, 11000 volts Earthed,grade cross sectional area 95 sq. mm 3 core complete all as specified and directed.

Item No 22 : Supply and fix Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm complete all as specified and directed.

Item No 23 : Supply and fix Cable jointing kit for 11 KV (Earthed) grade cable for indoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm complete all as specified and directed.

Item No 24 : Supply & install HT 11 KV outdoor Triple pole, mechanically operated, mounted on insulator and steel frame, with operating mechanism worked from ground level, for current rating upto 200 amps complete all as specified and directed.

Item No 25 : Supply and fix for HT 11 KV, lightning arrestor explusion type complete with all fittings, transmission class, discharge capacity 65 kilo amps complete all as specified and directed.

Item No 26 : S & F Disc type insulator, porcelain, vitreous 145mm high and 255mm dia ball and socket type, white, brown or green for 11000 volts grade complete all as specified and directed..

Item No 27 : Supply and fixing and connecting rated capacity automatic power factor correction (APFC) panel outdoor type factory made of 120 KVAR capacity ready to use design conforming to relevant IS rated for short circuit rating of 50 KA, front openable and lockable by keys having lours and air vent, gasket and totally verming proof and suitable for 415 / 440 Volt 3 phase 50 Hz, AC and housed in elegant enclosure fabricated from minimum 3.15 mm thick CRCA sheet and minimum 1.6 mm thick for partition anticorrosive coating to achieve power factor from 0.95 to 0.99 and finally powder coated in texture siemens grey RAL 7032 and as directed by Engineer -n - charge and comprising following suitable size and length of copper conductor cable from main panel to APFC panel for connection as approved:-

(h) All control wires shall be not less than 2.5 sqmm multi stranded copper conductor and properly bunches / ties, ferruled for proper identification and crimpled with adequate size of lugs, the cubicle will have a bottom support of channel of suitable size, duly coated with zinc metal coating. A detachable pre drilled gland plate of thickness 3.15 mm thick, cold zinc metal coated shall be provided with at the bottom for entry for armoured cable with adequated size of gland. Manufacturer name plate with feeder details with danger plate shall be provided at suitable visible place. (j) Auxillary contactor with required quanity of NO' & NC'

(k) Auto Manual switch -01 No (l) MCB for line protection as per requirement and as approved (m) Indicator lamp LED based with lamp holder as per requirement and as approved. (n) Current transformer (CT) of ratio 200/5A, measuring class accuracy 0.50 to 1.00 for capacitor panel. (o) Incoming MCCB capacity 250 amps, 4 pole, 415 volts 50 c/s, 36 KA manual type - 01 No (p) Detuning reactor of suitable size shall be provided to maintain THD less than 7 percent.fixed percent.

Item No 28 : M&L for removing of existing Transformer from plinth by disconnecting HT and LT side shifting to storeyard of AGE E/M by Hydra/Crane complete all as specified and as directed.

Item No 29 : M&L for removing of Existing RMU from plinth by disconnecting HT connections and shifting to new location by Hydra/Crane , reconnecting all HT connection , testing and commissioning all as specified and as directed.

Item No 30 : Supply fixing and connecting and testing 400 KVA step down, outdoor type 11/0.433 KV, AC double wound core type, copper wound, oil immersed, air naturality cooled with external cooling tubes, transformer delta connetion of HV side and star connection on LV side in accordance with vector symbol DYN -11 (vector group 4) and having tapping of + 7.5% in equal step of 2.5% off load tap changing arrangement. The voltage regulation shall be as per IS including first fill of transformer oil as per IS-335 and including all fittings/accessories as specified in SSR Part-I1 and IS-1180 for EEL 3 (as per latest ammendment of IS code) the transformer should have cable box on LT side and brass bushing on HT side. The limit of temp rise after continuous full laod run as specified in SSR Part-I and IS-1180 for EEL 3(Energy Efficiency Level 3) (as per latest ammendment of IS code) shall be suibably adjusted to suit the maximum ambient temp prevailing at site all as specified comprising with and including the following specifications:-

(i) 01 Nos Cable box on LT side consisting of 03 Nos porcealin bushing with bushing brass rods nad nuts washers and cable glands of suitable fr reception of cable LT 1100 volts grade XLPE insulated heavy duty including gland joint complete. (ii) HV bushing with arching horn on 11 KV side. (iii) Oil conservator with filter type drain valve and oil level guage. (iv) Explosion Vent (v) Thermometer Pocket. (vi) Two Earthing terminal on tank body to facilitate fixing of 32x6 GI strips. (vii) One No Thermometer Dail type vapour pressure type having range 0-120 degree centigrade with maximum temperature indicator and re-setting device to maximum temperature including needle of temperature guage : Max reading pointed terminal.

(Viii) Rating plate with terminal marking plate. (ix) Oil level guage. (x) Oil drain filter valve. (xi) Oil filling pot on top cover with plug. (xii) Air release valve/plug. (xiii) First fill of transformer oil confirming to relevant to IS tested upto 60 KV dielectric strenght. (xiv) Inspection cover. (xv) Lighting lugs and jack lifting pad support. (xvi) Bi-directional plain / flanged rullers. (xvii) Explosion vent with double diaphragm and sight glass. (xviii) Breather assembly with silica gel or with connecting pipe first fill of dehdrating agent. xix) Hand hole of sufficient size to assess the interior of the tank. (xx) Cover ligting eyes. (xxi) oil temp indicator of approved range, including shut off valve between conservator and main tank.

Item No 31 : M&L cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of following sizes complete all as specified and directed.

(a) 3.5 core x 400 sq mm

(b) 3.5 core x 185 Sqmm

(c) 3.5 core x 120 Sqmm

(d) 3.5 core x 95 Sqmm

(e) 3.5 core x 50 Sqmm

(f) 3.5 core x 35 Sqmm

(g) 4 core x 25 Sqmm

(h) 4 core x 16 Sqmm

(j) 2 core x 10 Sqmm

Item No 32 : Supply and fixing LED street light fitting 70 watt of luminous efficacy not less than 120 lm/watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Item No 33 : S&F 12 KW, three phase nature switch for automatic switching on / off street light based on lux level of nature light, consisting of sensor, overload protection fuse gear, power contactor and MCB of suitable capacity, terminal blocks for cable entry & control unit enclosed in pole / wall mountable enclosure made out of rust proof, shock proof, termite proof FR grade SMC, conforming to IP 54, with universal lock and key arrangement complete all as specified and as directed.

Item No 34 : S&F security light bracket with 40 mm dia GI Pipe light grade 1.2 mtr long bend to an angle of 120 degrees with two nos. MS flat iron clamp 50 x 6 mm, nuts, bolts and washers, duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Item No 35 : S&F PVC junction box IP - 66 / 67 thermoplastic poly carbonate including connector block, two holes for incoming and outgoing cables, providing cable glands double compression as per requirement, providing DIN rail for mounting MCB SP and including mounting MCB SP 6 Amp C curve,10 KA and clamps made out of MS flat iron 25 x 4 mm, MS hexagonal bolts, nuts and washers for arrangements to pole/ surfaces complete all as specified and directed.

Item No 36 : Supplying, fixing, jointing and testing twin core electric cable with FRLSH copper conductor, 1100 volts grade, cross sectional area 2.5 sqmm 2 core, ISI marked, with electric connection lugs, fixed naked with walls / on poles/ on high mast / in GI pipes etc. complete all as specified and directed.

Item No 37 : Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete.

Item No 38 : Supply ,fabrication, installation and testing of LT Panel out door type factory made CPRI Approved, water and vermin proof protection of size 2500 mm x 1500 mm x 800 mm (over all dimension) made out of 3.15 mm thick CRCA sheet dully supported with mild steel angle iron of size 50 x 50 x 6 mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizontal sides of the frame with front and back side openable ,single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories and also including removing old exisisting one complete all as specified and as directed. . NOTE:- Rate of earthwork and PCC work are deemed to be inclusive in this item.

INCOMMING (a) Copper strip busbar of 1200 amps rated capaacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 Nos (b) ACB 4 Pole 600 Amps, Draw- out type circuit breaker with Microprocessor based ET6L Trip Unit with thermal memory, Fully rated neutral with in built protection, ET6L provides Over load, Shortcircuit, Instantaneous & Earth-fault protections, Short circuit breaking capacity 50 KA @440 volts AC, Conforms to IS/ IEC60947-2&3 - 01 No.

Item No 39 : Supply ,fabrication, installation and testing of LT Panel out door type factory made CPRI Approved, water and vermin proof protection of size 1500mm x 1400mm x 500 mm (over all dimension) made out of 3.15 mm thick CRCA sheet dully supported with mild steel angle iron of size 50 x 50 x 6 mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizontal sides of the frame with front and back side openable ,single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories and also including removing old exisisting one complete all as specified and as directed. Note: Rate of earthwork and PCC work are deemed to be inclusive in this item.

INCOMMING (a) Copper strip busbar of 320 amps rated capaacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 Nos (b) 4 pole MCCB 200 Amps with rotary handle, adjustable thermal magnetic release type 415 Volts, Ics = 100% Icu, breaking capacity 35 KA including all fixing accessories with both ends spreader links - 01 No. (c) LED Neon indicator lamp (RYB) with holder and fuse holder 230/250 volts, AC -01 set (set of three) Make :- Legrand/L&T/Schneider.

Item No 40 : Supply ,fabrication, installation and testing of LT Panel out door type factory made CPRI Approved, water and vermin proof protection of size 1000mm x 1000mm x 500 mm (over all dimension) made out of 3.15 mm thick CRCA sheet dully supported with mild steel angle iron of size 50 x 50 x 6 mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizontal sides of the frame with front and back side openable ,single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories and also including removing old exisisting one complete all as specified and as directed. Note: Rate of earthwork and PCC work are deemed to be inclusive in this item.

INCOMMING (a) Copper strip busbar of 200 amps rated capaacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 Nos (b) 4 pole MCCB 125 Amps with rotary handle, adjustable thermal magnetic release type 415 Volts, Ics = 100% Icu, breaking capacity 35 KA including all fixing accessories with both ends spreader links - 01 No. (c) LED Neon indicator lamp (RYB) with holder and fuse holder 230/250 volts, AC -01 set (set of three) Make :- Legrand/L&T/Schneider.

(c) Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm X 150mm , white with letters , figures and conventional skull and bones in signal red and fixed with nuts and bolts on door / shutter of JB for LT -01 No.

Item No 41 : M & L for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised iron earth strip of size 32x6 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length , 40mm GI pipe heavy grade for protection of GI Strip and 20mm GI pipe heavy grade for watering with wire mesh and funnel including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 3, connected to earthing test point complete including testing on completion all as specified.

Item No 42 : M & L for Earthing complete with copper earth plate electrode 600 x 600 x 3.15 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to copper earth strip of size 20x3 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length , 40mm GI pipe heavy grade for protection of GI Strip and 20mm GI pipe heavy grade for watering with wire mesh and funnel including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 3, connected to earthing test point complete including testing on completion all as specified.

Item No 43 : M & L for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised earth lead wire of 4.0 sqmm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length , 15mm GI pipe heavy grade for protection of GI wire and 20mm GI pipe heavy grade for watering with wire mesh and funnel including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 3, connected to earthing test point complete including testing on completion all as specified.

Arboriculture

Item No 44 : Supplying and stacking at site decayed dung manure screened through IS desingnation 20 mm sieve , from approved source complete all as specified and directed. Notes:(i) The rate quoted shall include cost of royality, excavation and transporation of manure to any distance and stacking for measurement. (ii) Manure measured in stacks will be reduced by 10% for payment.

Item No 45 : Tilling of land by means of suitable mechanical means i.e. tiller etc pulled by tractor and leveling / planing the surface using heavy wooden pallet for light compaction and preparing the surface containing optimum moisture content and planting doob grass in rows 10cm apart in either direction complete all as specified and as directed by Engineer-in-Charge.

Item No 46 : Mixing decayed cowdung manure and earth to make mixture of earth & manure, spreading the same over required area and surface dressing the area to a true level and required slope for grass plantation or to make plant/flower beds.

(i) 100 cm dia and 100 cm deep

(ii) 60 cm dia and 60 cm deep

Item No 48 : Flooding ground/lawn, flower beds, plant surroundings etc including necessary arrangement to retain water in the area, if required, and removing of vegetable and grass in the area complete.

(i) lawn/ground

Item No 49 : Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.

Item No 51 : Preparation of flower beds (seasonal / perinial) by digging upto 45cm deep, sun drying for 3-5 days, mixing with cowdung manure (5cm thick layer allover the area) , aplication of insecticide @ 25ml/Sq.m, planting of seeding at specified distance and irrigating the area till the development of healthy flower product complete all as specified and directed.

Item No 52 : Preparation of beds for hedging and shrubbery by excavating 60cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, plantation, watering and finally fine dressing, leveling etc.

Item No 53 : Plantation of Neem, Mango, Peepal, Bargad, Jamun, Kikar, Seasam, Guava, Sangwan Tree with plants having minimum height of 1.20 metre above ground level including preparation of Plant Bed incl Manuring and watering.

Item No 54 : - Ditto - but Lemon and Orange Trees with plants having minimum height of 0.90 metre above ground level.

Item No 55 : Plantation of 'Bottle-Palm Trees' with plants having minimum height of 1.5 metre above ground level including preparation of Plant Bed incl Manuring and watering. Notes :(i) Tree plants will be obtained from nursery of MP Govt or any other Nursery approved by GE.(ii) Payment for this item shall be made only for the plants found alive. Any dead plant shall be replaced with the new once with out any extra cost to the Govt.

Item No 56 : 16. Supply only rubber /PVC tube, heavy duty, for watering of 25mm dia as specified and directed.

Item No 57 : Supply only brass sprinkles, heavy duty suitable for connecting to 25mm dia water connection, with and including MS standing arrangement for watering the area complete

Internal Electrification

Item No 58 : S & F modular type TV Socket out let complete all as specified and as directed.

Item No 59 : S & F modular type LAN Socket RJ 45 with complete box

Item No 60 : S & F modular type Telephone socket RJ 11/12 with complete box

Item No 61 : S & F modular Metal flush box 8 module

Item No 62 : S & F modular Metal flush box 12 module

Item No 63 : S & F modular white cover plate with frame 12 module

Item No 64 : S & F for sheet metal enclosure MCCB VTPN DB 4 Way Vertical type with 200 Amps rated bus bar 415 volts Double Door with magnitic locking system including necessary provision for inserting MCCB as Incomer and fixing the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed by Engineer in charge

Item No 65 : S & F Engage light Decorative wall mounted luminaire made out of polycarbonate with unbreakable 02 Nos globe with suitable for LED bulb and provosion of 02 LED bulb 10 watts of colour RED and GREEN complete all as specified and as directed.

Item No 66 : S & F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provosion of LED bulb 10 watts complete all as specified and as directed.

Item No 67 : S & F for Highly efficient chargeable from electricity LED Bulbs, 9 W, luminous efficacy not less than 105 lumen/Wcomplete all as specified and directed by Engineer in charge

Item No 68 : S & F new generation LED Highbayof capacity 100 watt with aluminium PDC housing and toughened glass to ensure IP 66 luminous efficacy not less than 130 lm/w and including hanging arrangement from the ceiling at any height. etc complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.

Item No 69 : S & F Flame proof mettalic body 1440 RPM heavy duty exhaust fan 300mm sweep with fixing arrangement

Item No 70 : S & F heavy duty air circulator 600mm sweep mounted on wall at height as directed by GE with fixing arrangement

Item No 71 : S& Foccupancy sensor suspended type to detect the presence of a personfor include automatic adjustment of lights systems in response to the quantity of people present for switch off/on the light in a circuit as per use reqmt ( for use at parking area, verandah or any other space where power saving srequired)

Item No 72 : M & L Earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised iron GI wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length , 15mm GI pipe heavy grade for protection of GI wire and 20mm GI pipe heavy grade for watering with wire mesh and funnel including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 3, connected to earthing test point complete including testing on completion all as specified.

Item No 73 : S & F for LED 10 watts batten aluminium extruded with decorative end caps luminous efficacy not less than 120 lumen/W complete all as specified and as directed.

Item No 74 : S & F surface/recess mounted ceiling light of capacity 36 watt, approx size of 2x2 ft , 230 volts with CRCA housing luminous efficacy not less than 120 lumen/W with and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor with flexible conduit of suitable size complete all as specified and as directed.

Item No 75 : S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, luminous efficacy not less than 120 lumen/W 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor and flexible conduit of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

Item No 76 : S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts, luminous efficacy not less than 110 lumen/W with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge.

Item No 77 : S & F for LED light fitting 16 watt flame proof , CMRI certified recommended for gas /vapor group IIA & IIIB , zone 1 & 2 and IP 65 protection with die cast aluminium housing with heat resistant toughened glass with LED tube light fixture driver, holders, connector etc complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.

Item No 78 : S & F for PVC non-metallic rigid conduit ISI marked heavy duty white/ Ivory colour and its accessories including junction box,tee, bends, elbow, reducer, bell mouth etc heavy duty ISI marked of size 25 mm dia for LAN, telephone and TV connections including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed.

Sewage Disposal

Item No 79 : S&F of SFRC factory made precast manhole cover and frame HD - 20 circular 600 mm (clear size opeining in frame) as per IS 12592:2002 including reinforcement and set in CM 1:4 complete all as specified and directed by Engr-in-Charge.

Item No 80 : M & L for Double Wall Corrugated HDPE Pipe 147mm ID and 175 mm OD class SN-8 sewage pipe laying & testing till made functional on ground complete all as specified and directed.

Item No 81 : M & L for Double Wall Corrugated HDPE Pipe 200mm ID and 230mm OD class SN-8 sewage pipe laying & testing till made functional on ground.

Item No 82 : Construction of septic tanks for 100 users, exc, in ordinary soil, foundation In PCC (1:2:4), brick work in CM (1:4), RCC Slab covers including SFRC having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc. complete all as specified and directed and shown on drgs .

Item No 83 : Construction of Soakage wells of size 2.4 M dia X 3.0 M effective depth of RCC/DWC complete filled with brick bats excavation, in any type of soil, foundation in PCC (1:3:6), walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonry in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes complete all as specified and directed and shown on drgs.

Item No 84 : Almirah Large Steel with Shelves FD-1031

Item No 85 : Almirah Steel Medium FD-1032

Item No 86 : Bath Mat (PVC) FD/E6/MAP/07

Item No 87 : Bed Hard Steel JCOs/Offrs FD/E6/MAP/08 (R)

Item No 88 : Bed Hard Steel Offrs with Pillow and Mattress FD/E6/MAP/08 (R)

Item No 89 : Blackboard with easel FD-1041

Item No 90 : Book Case Steel FD FD-1028

Item No 91 : Carpet Woolen as per trade pattern of overall size 6.5 meter x 5.5 meter and shade colour and quality as approved by GE. Thickness shall be 7-9 mm and average weight is not less than 2 Kg per Sqm. (TP)

Item No 92 : Chair CB Steel FD-75(M)

Item No 93 : Chair CBA Steel FD-120(M)

Item No 94 : Chair Computer FD/E6/MAP/01

Item No 95 : Chair Dining FD/E6/MAP/10

Item No 96 : Chair Draftman FD-03

Item No 97 : Chair Easy FD-229

Item No 98 : Chair Easy With Cushion FD-358

Item No 99 : Chair paded with arm CWE/M/F/18/95

Item No 100 : Chair Plastic With Arms premium quality shape, colour, and quality as approved by GE.

Item No 101 : Chair Revolving Premium quality shape, colour and quality as approved by Ge.

Item No 102 : Chair School with hand board FD/E6/MAP/05

Item No 103 : Chair Writing FD-280

Item No 104 : Charpoy IP Hard Top FD/MAP-II/01

Item No 105 : Desk Stand Lecture FD-125/M

Item No 106 : Desk With Dais F-38

Item No 107 : Display Board CWE/M/F/3/95

Item No 108 : Drugget as per trade pattern of overall size 3 Meter x 2 Meter and shade colour and quality as approved by GE. Thickness shall be 5-7 mm and average weight is not less than 0.8 Kg per Sqm. (TP)

Item No 109 : Forme With Back FD-78

Item No 110 : Hat Stand With Mirror FD-233

Item No 111 : Hat Stand With Mirror for 20 Caps CWE/M/F/32/01

Item No 112 : Meat and Milk Safe FD-370

Item No 113 : Notice Board FD-99(M)

Item No 114 : Pointer Long FD-1041

Item No 115 : Pointer Medium FD-71(M)

Item No 116 : Rack steel 6 tier FD-1038

Item No 117 : Rack Pigon Hole FD-106(M)

Item No 118 : Rack side 3 Tier 3 trays FD-1023

Item No 119 : Receptacle PVC 20 Ltrs FD/E6/MAP/13

Item No 120 : Sofa Set 2 Seater FD-373

Item No 121 : Sofa Set 3 Seater Cushioned FD-281

Item No 122 : Sofa Set 5 Seater (3+1+1) FD-373

Item No 123 : Stool steel FD-81

Item No 124 : Table Office Clk Steel FD-1004

Item No 125 : Table Office Officer Steel FD-1003

Item No 126 : Table 3x2 Steel With Drawer FD-1008

Item No 127 : Table 900mm x 600 mm with drawer FD-283

Item No 128 : Table Bed Side (MAP) FD/E6/MAP/15(R)

Item No 129 : Table Centre FD-274

Item No 130 : Table Computer (MAP) FD/E6/MAP/03

Item No 131 : Table Conference for 20 Pers CWE/M/F/5/95

Item No 132 : Table Cook House FD-377

Item No 133 : Table Dining (6 pers) (MAP) FD/MAP-II/03

Item No 134 : Table Dining 8 Pers FD-273

Item No 135 : Table Draftman DB-4417

Item No 136 : Table Duplicator FD-410

Item No 137 : Table Peg (FD) FD-384

Item No 138 : Table Pentry FD-4068

Item No 139 : Teapoy FD FD-382

SCHEDULE "A" (Schedule of credit) Schedule of Credit Rs 5564256.51 (Minus) inserted by the MES. (Note : Credit amount shall be deducted manually to arrive net bid amount)

Agarwal Jagdish Construction Company Private Limited