REPAIR TO DRAIN, CULVERT SMQ, OMQ AND SMALL ARM RANGE AT AF STN DEOLALI

Amount

M&L for sieving of fine sand and saw dust mix and removal of excess size granulars & waste material and spreding the mix of fine sand saw dust material as per rquired gradient placing in that manner if 16 mm plain bar drop from 1 mtr hight it will be penetreat into the spreding swae dust and fine sand material uptto 900mm also adding additional saw dust and fine sand to maintained the level in ratio of 1:1 as directed by Engr-In-Charge. Note: Payment of fine sand & saw dust measured and paid seperately at seperate item.

Supply only fine sand as directed by Engr-In-Charge

Supply only fine saw dust as directed by Engr-In-Charge

Demolition of Brickwork of stone/boulder masonary, built in cement mortar including all quions, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc.

M&L for 15mm thick Rendering on fair faces of brick work or concrete sureces in Cement Moratar 1:4 finished surface even and smooth without using extra cement complete all as specified and directed.

Demolition of Cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc. 15 cm thickness (below or above ground level) complete all as specified.

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth for foundation, etc or for shafts, wells, cesspits, manhole, pier holes, etc and getting out in soft/loose soil

M&L Cement concrete 1:4:8Type D2 (using 40mm graded aggregate) as in foundation, filling and mass concrete.

M&L for Brickwork with sub-class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6

M& L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in Cement mortar 1:6

M&L Cement concrete 1:2:4 Type B1 (using 20mm graded aggregate) as in surface channels and drains

M&L for providing cement concrete 1:2:4 type B1(using 20mm graded aggregatae) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height copings, kneelers, apex stones, bed plates, kerbs, back filling of PS frame and the like inclueing weathering slightly rounded or chamfered angles and throating as directed(including necessary form work)

M & L for Providing precast ce- ment concrete 1:2:4 type B-1 with using 20 mm grade aggregate as cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 including necessary use and waste from works etc complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, including flat rough finished surafaces of concrete complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, ladings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished surfaces of concrete ( flat ) complete all as specified and directed.

Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, andsimilar work all exceeding 20cm wide rough finished surfaces of concrete ( flat ) complete all as specified and directed.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, includiing cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.

M&L preparing newly plastered surfaces of walls and applying two coat of cement base paint complete all as specified and directed.

SIDDHIVINAYAK ENTERPRISES

M/S R.K.S. CONSTRUCTION

M/S KANNANS

MAHIMA CONSTRUCTION