GE/S(U)-06/2021-22 SPECIAL REPAIR TO BUILDING NO P-13 AT SAPPER ENCLAVE ADDN/ALTN TO BLDG NO NP-33 AT 9 PARA (SF) BLDG NO P-28 AT SAPPER ENCLAVE AND CERTAIN REVENUE WORKS UNDER GE (SOUTH) UDHAMPUR

Amount

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of brick/stone masonry built in cement mortar or cement lime mortar built in CM complete all as specified and directed.

Brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 bricks complete all as specified and directed.

PCC 1:3:6 type C-2 (using 40 mm graded aggregate) in surface channel and drains complete all as specified and directed.

Extra for forming fair finished drain or channel exceeding 30 cm inner girth in cement concrete, using extra cement, including forms moulds, mitered/stopped ends etc. complete all as specified and directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Rendering 15 mm thick in two layer (10 + 5 mm) on brick work or concrete surfaces in cement mortar 1:4 finished even and fair without using extra cement including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified and directed. (Water proofing compound to be measured and paid for separately).

Rendering 15 mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Square Metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt), complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed by Engineer-in-Charge.

Pressed steel frames for doors made out of 1.25 mm thick MS sheet with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate 12 mm bar thresh hold etc. complete, of frame size 165 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed.

Pressed steel frames for doors made out of 1.25 mm thick MS sheet with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate 12 mm bar thresh hold etc. complete, of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed.

Providing cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregates) for filling in the pressed steel door frame/hold fast complete all as specified and directed.

Mild steel, 150 mm, ordinary rat tail rod pattern door spring including roller and roller plate complete all as specified and directed.

35 mm thick factory made, 2nd class hard wood, plain framed, panelled shutters (two or more panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing, in opening as per specifiecation and drawings complete all as specified and directed.

Factory Made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with but 2 mm thick Moulded Prelam PVC Sheet on the front face & 2 mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing jointed together with solvent cement supply & fixing in the frame at site complete all as specified and directed.

150 mm aluminium handles, cast type anodised complete all as specified and directed. (ISI Mark)

150 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. (ISI Mark)

Mild steel cold rolled butt hinges medium weight 75 mm long, including fixing to pressed steel door frame cupboard & almirah if required complete all as specified and directed.

250 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. (ISI Mark)

2nd class hard wood small fittings such as shaped door & window stops, cleat including all necessary labours, articles not exceeding 200 cubic centimetre each complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

18/19 mm thick Block boards, grade 1 quality, interior grade, decorative type with decorative face veneer on one face, fixed with screws to timber frame-work including teak wood beading with lipping/frame to match complete all as specified and directed.

0.90 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

Rolled mild steel work of angle iron as in frames of doors & Cup Board etc. confirming to grade Fe 410-O or Fe-310-O complete all as specified and directed.

Continuous (piano) hinges mild steel, bright finish width of flaps (when open) 30 mm complete all as specified and directed.

100 mm size hasp and staple safty type aluminum anodized with mild steel hinges pin including bolt to hinge plate and fixed with screw complete all as specified and directed.

Ball catches with 8mm dia steel balls and brass body and striking plate including letting in and fixed complete all as specified and directed.

Providing 50 mm thick cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregates) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.

Mild steel framed work for water tanks, stand for water cooler and similar work confirming to Fe 290 Gde E-165 fixed in repair complete all as specified and directed.

Welded steel wire fabric mesh weight not exceeding 4 Kgs per sqm fixed to steel members complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar beddig not backing complete all as specified and directed.

25 mm thick cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) as in floor and finished even and fair complete all as specified and directed.

Non-skid coloured ceramic tiles (square/ rectengular) 7 to 8 mm thick, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.

Glazed ceramic coloured tiles in vertical surfaces 300 x 450 x 7 mm/300 x 600x 7.8 mm thick area of each tile set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed and as approved by GE.

Vitrified ceramic coloured tiles light shade double charged 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed.

Vitrified ceramic coloured tiles light shade double charged 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm as skirting /dado, set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed.

10 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 and finished even and fair to receive tiles without using extra cement complete all as specified and directed.

Roughening of old concrete surfaces by picking, sweeping clean and washing down with water, fanning dust etc. and taking down tarfelt and brushing neat cement slurry with 3.00 kilogram of cement per square metre including 20 mm thick screed bed or bedding layer in cement mortar 1:4 finished even and smooth including mixing with integral WPC complete all as specified and directed. Note : Supply only water proofing compound shall be measured and paid separately under the respective Item.

Priming the roof surface with bitumenous primer @ 0.4 litres/Sqm and applying a coat of semi hot blown 85/25 grade bitumen @ 1.2 Kg /Sqm and thereafter supply and laying Polymeric membrane 3.00 mm, five layered, of weight not less than 3.50 Kg per Sqm with centre layer core of 90 micron high molecular density polyethylene film and bonded completely to the surface with overlap of 15 cm at the end and 7.5 cm side overlap (overlap to be thermo fused by frame) followed by another coat of semi hot blown 85/25 grade bitumen @ 0.7 Kg/Sqm blinded with fine sand in dry condition @ 0.5 Kg/Sqm and applying a coat of aluminium paint complete all as specified and directed. Note :- Water proofing treatment will be done by IWL or through a specialized agency which will further have to give a five years warranty for rectification of any defect if incurred at a later stage, otherwise no payment shall be made to the contractor if water proofing treatment is executed by engaging local labour.

Providing plain cement concrete (1:2:4) type B-0 (using 12.50 mm graded aggregate) as in repair to paiding to roof, water troughs and the like including weathering, slightly to ascertain the proper slop complete all as specified and directed.

10 ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets in repair complete all as specified and directed. Make : CERA/Jaquar or equivalent.

Supply only flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern complete all as specified and directed.

Brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges in repair complete all as specified and directed.

CP mixture 15 mm bore for mixing hot & cold water screw down for iron pipe complete all as specified and directed.

Shower diverter single lever exposed part kit of hi flow diverter consisting of operating lever wall flage screwed for iron pipe of 15 mm complete all as specified and directed. Make -Jaquar/CERA or equivalent

Kitchen sink mixture single lever with swinging spout on upper side wall mounted model with connecting legs and wall flange screwed for iron pipe of 15 mm complete all as specified and directed. Make - Jaquar/CERA or equivalent.

15 mm bore Angle cock CP with wall flage screwed for iron pipe of 15 mm complete all as specified and directed. Make : Jaquar/CERA or equivalent

15 mm bore bib taps CP with wall flage screwed for iron pipe of 15 mm complete all as specified and directed. Make : Jaquar/CERA or equivalent

Over head Shower rose 200 x 200 mm Square shape single flow CP With gray face plate with rubit cleaning system screwed for iron pipe of 15 mm complete all as specified and directed. Make : Jaquar/CERA or equivalent

Health faucet with 8 mm dia 1.00 m long flexible tube and wall hook with all accessories all as aproved and complete all as specified and directed. Make - Jaquar/CERA or equivalent

CP Towel rack 600 mm long with lower hanger complete all as specified and directed. Make : Jaquar/CERA or equivalent.

CP Towel ring square with round flange complete all as specified and directed. Make : Jaquar/CERA or equivalent.

Toilet paper holder with flap complete all as specified and directed. Make : Jaquar/CERA or equivalent.

Vitreous China wash down water closet pan (pedestal pattern) single piece couple closet size - 810 x 405 x 730 tap distance S-250, including plastic seat cover with nuts and bolts as fixed and in repair complete all as specified and directed. Make : Jaquar/CERA or equivalent.

Corner glass shelf with brackets in repair complete all as specified and directed. Make : Jaquar/CERA or equivalent

Soap dish fancy type chromium plated fixed with brass screws and wooden/plastic cleats complete all as specified and directed. Make : Jaquar/CERA or equivalent.

15 mm bore stop cock CP with wall flage screwed for iron pipe of 15 mm complete all as specified and directed. Make : Jaquar/CERA or equivalent

Pillar taps 15 mm bore, chromium plated, Single lever basin Mixture without pop up waste and 450 mm long braided hoses screwed for iron pipe of bore 15 mm in repair complete all as specified and directed. Make : Jaquar/CERA or equivalent

Taking up or down steel tubing with connections for cleaning for refixing or removing to storeyard complete of bore 15 mm complete all as specified and directed.

All as per ser item No 62 but 20 mm bore pipe complete all as specified and directed.

Steel water tubing of nominal bore 15 mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed.

All as per ser item No 64 but 20 mm bore pipe complete all as specified and directed.

Demolition and breaking up drain pipes 100 mm dia (Salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

PVC (SWR) pipe single socketed in any length with rubber rings joints fixed to walls for 110 mm bore pipe complete all as specified and directed.

110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

Vitreous China wash basin, white, flat back, size 550 mm x 400 mm excluding tap, chain, plug and porcelain stopper but including brackets and cutting for and pinning in ends of brackets in repair complete all as specified and directed. Make : CERA, Cat Part No -1025,1108

Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

PVC grating 100 mm dia fixed to floor trap in repair complete all as specified and directed.

Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plate bracket guard and railing 60 cm long in repair complete all as specified and directed.

Bib tap 15 mm bore fancy type chromium plated in repair including CP nipple with socket in repair complete all as specified and directed. Make : Cera, Cat Part No : CC 104.

Waste fittings 32 mm/40 mm bore, brass, chromium plated for basins etc with long screwed shanks and fly nuts, flange and bed deal in red lead cement and other end as in repair complete all as specified and directed.

PVC connection 15 mm size with PTMT (Make-Prayag) Nuts of length 450 mm complete all as specified and directed.

Preparation of old steel and iron surfaces of any discription exceeding 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of new steel and iron surfaces of any discription exceeding 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.

Preparation of new wood or wood based surfaces of any discription not otherwise described exceeding 10 cms width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Preparation of old painted wood or wood based surfaces exceeding 10 cms width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coat of oil emulsion distemper over one coat of primer complete all as specified and directed.

Two coats of white wash on ceiling on newly plaster surfaces including preparation of surfaces complete all as specified and directed.

Applying two coats of cement base paint on walls after preparation of newly plastered surfaces complete all as specified and directed.

Applying two coat of oil emulsion distemper on old decorated plastered surfaces of walls after preparation of surfaces complete all as specified and directed.

Complete removal of existing treatment from wall/facia surfaces by rubbing, washing down and stopping of distempered and painted surfaces and applying two coats of apex ultima paint over a coat of primer and thin layer of wall care putty (Birla/JK) including preparation of surfaces (colour of apex ultima approved and complete all as specified and directed.

Applying one coat of cement base paint on old surfaces of walls after preparation of surfaces complete all as specified and directed.

Applying one coat of Royale luxury Emulsion on old decorated plastered surfaces of walls after preparation of surfaces complete all as specified and directed.

Two coats of white wash on ceiling on old plaster surfaces including preparation of surfaces complete all as specified and directed.

Providing of treating the soil along with external perimeter of building at the rate of 2.25 litre of Antitermite treatment chemical emulsion per metereof the perimeter wall, complete all as specified and directed by Engr-in-Charge. Note : The treatment work shall be carried through authorized agency only, and certificate for the same ofr warranty shall have to be furnished before submitting payment.

Providing treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5ltr/hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and directed by Engr-in-Charge.

Preparation of new and old surfaces on wall and applying a coat of wall putty (JK/Birla) to make the surface smooth and even complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi corrugated etc. sheets in roof covering complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.60 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping complete all as specified and directed.

Hard core of broken stones or boulders of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick including watering and rolled to true surface complete all as specified and directed.

75 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in in floor and finished even and smooth complete all as specified and directed.

40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) as in floor and finished even and smooth complete all as specified and directed.

20 mm thick screed bed or bedding layer of cement mortar (1:4) for laying floor finishes complete all as specified and directed.

glossy finished Chequered cement concrete tiles 30 cm x 30 cm x (22-25) mm thick, machine pressed, factory made, Glossy finished, set jointed and pointed in neat cement slurry in floor with grey cement and pigment complete all as specified and directed.

Door closer hydraulically regulated/floor locking machine, designation No 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed in repair complete all as specified and directed.

Aluminium anodised double shutter ventilator (glazed and wire gauge) top hung with aluminium ventilator frame or chowkhat 1.5 mm thick aluminium anodised of size 100 mm x 44.5 mm and ventilator shutter frames glazed and wire gauze 1.5 mm thick aluminum anodised of size 44.5 x 44.5 mm including aluminium grill, Stainless steel wire Mesh and all fitting such as rubber gasket aluminium glazing clips and including 4 mm thick tinted glass pane in glazed shutter fixed with rubber gasket and glazing clip/aluiminium beads aluminium tower bolt 75 mm 02 Nos in each shutter, aluminium butt hinges 50 mm 02 Nos in each shutter aluminium handle 75 mm 01 No in each shutter including all accessories complete all as specified and directed.

Aluminium anodised double shutter window (glazed and wire gauge) side hung/sliding with aluminium window frame or chowkhat 1.5 mm thick aluminium anodised of size 100 mm x 44.5 mm and window shutter frames glazed and wire gauze (middle, top rail, bottom rail) and styles 1.5 mm thick aluminum anodised of size 44.5 x 44.5 mm including aluminium grill, stinless steel wire mesh and all fitting such as rubber gasket aluminium glazing clips locking cabinet and 75 mm handle and including 4 mm thick tinted glass pane in panes fixed with rubber gasket and glazing clip/aluiminium beads aluminium tower bolt 75 mm 02 Nos, aluminium butt hinges 75 mm 02 Nos in each shutter aluminium handle 100 mm 01 No in each shutter including all accessories complete all as specified and directed.

Plate rack made of stainless steel 785 x 760 x 250 x 0.63 mm including fixing as per manufacturers instruction in repair complete all as specified and directed. Make : Blue Star.

Powder coated aluminium anodised grill/guard bars to aluminium window/ ventilator complete all as specified and directed.

40 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Factory made, 2nd class hard wood 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauze etc complete all as specified and directed.

4-6 mm thick AC board (designer composite ceiling) of size 600 mm x 600 mm panel confirming to IS 14862 type B category three including GI frame work with size of grid 605 mm x 605 mm for seanless ceiling comprises of GI perimeter including all accessories complete all as specified and directed. Make : Everest.

All as per ser item No 92 but preformed sheets as in ridges complete all as specified and directed.

Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance Pieces, cleats etc. Fe 410 - (Gde-E-250) quality-A complete all as specified and directed.

Steel window (Box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and directed. Note : (i) The window shall be fabricated as per Drg CEUZ/TD/1269/2008 Sh 1/3. (ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

Description all as per ser Item No 108 here in before but without glazing bar complete all as specified and directed.

Screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed.

Cement concrete 1:2:4 type B-1 as in edges, kerb stone etc. and other similar works including weathering and slightly rounded and chamfered angles complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundations etc. and getting out as in soft/ loose soil complete all as specified and directed.

Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and directed.

Returning, filling including spreading leveling watering and well ramming in layers not exceeding 25 cm in any type of soil complete all as specified and directed by Engr-in-Charge.

Removing excavated any type material (soils) exceeding 250 m but not exceeding 500 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.

PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed by Engr-in-Charge.

PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in floor/sub-base and finished even and fair without using extra cement complete all as specified and directed.

Supply and fixing glass dividing strips 38 mm wide and 3 mm thick complete all as specified and directed.

Walling of random rubble masonary uncoursed well bonded bedded and solidly hearted built in CM 1:6 including flush pointing at back side as work proceed complete all as specified and directed.

Dismantling wall and ceiling boards, fibre pulp insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Preparation of new plastered or unplastered surfaces of wall and apply two coat of oil bound distemper over a coat of primer including two coats of wall care putty complete all as specified and directed.

Preparation of new plastered or un-plastered surfaces and walls including cornices, pilasters etc and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Rendering 10 mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Chromium plated cancealed stop valve cast copper alloy screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions chromium plated of size 15 mm in repair complete all as specified and directed.

Rotational molded (double layered as per IS 12701) polyethylene water storage storage tank (cylindrical vertical with closed threaded top) hoisted and fixed in position including connecting inlet/outlet pipe connecting with necessary fittings all as required at site and specified in SSR part-I of capacity 1000 litres and dismantling of old unserviceable water tank of same capacity all as specified and directed by Engr-in-Charge. Make - Sintex/Rotex five star.

All as per ser item No 129 but 500 lltres complete all as specified and directed.

Dismantling cast iron pipe and reinforced concrete drain pipes, jointed in cement mortar of any dia taking out from trenches or fixed to wall upto 100 mm complete all as specified and directed.

100 mm cast iron soil sand cast pipes, waste and vent in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed. (ISI Marks).

75 mm cast iron soil sand cast pipes, waste and vent in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed. (ISI Marks)

100 mm cast iron soil sand cast pipes, waste and vent in any length with or without ears, with cement joints, fixed to walll complete all as specified and directed.

75 mm cast iron soil sand cast pipes, waste and vent in any length with or without ears, with cement joints, laid in wall complete all as specified and directed.

Salt glazed stone ware gully traps square or round mouthed, type P of size 150 x 150 mm set and jointed to drain pipe with cement mortar (1:1) including demolition of old unserviceable gully traps complete all as specified and directed. (ISI Marks).

Cast iron bends (any radius diminishing pieces or tapes (larger bore measured), 75 mm bore fitted with oval access door fixed with rubber ring joints as in repairs complete all as specified and directed.

Cast iron bends (any radius diminishing pieces or tapes (larger bore measured), 100 mm bore fitted with oval access door fixed with rubber rings joints as in repairs complete all as specified and directed.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work confirming to Fe.290.Gde-E-165 complete all as specified and directed.

Cutting holes exceeding 150 Sqcm but not exceeding 400 Sqcm each into or through brick walls built in cement mortar and making good in cement concrete 1:2:4 type B-1 complete all as specified and directed.

Removing excavated material not exceeding 50 m and depositing where directed to a level not exceeding 1.50 m above starting point complete all as specified and directed.

Providing cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in plinth course, string course and damp proof course etc. including mixing of integral water proofing compound complete all as specified and directed. Note : water proofing compound shall be measured and paid separately.

Preparing new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

Butt hinges medium weight 100 mm size complete all as specified and directed.

Steel ventilators top hung shutters including hinges, steel peg stays and one coat of zinc chromate primer complete all as specified and directed.

3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm each pane complete all as specified and directed.

50 mm cast iron soil, sand cast, waste and vent pipes in any length with or without ears, with cement joints fixed to walls complete all as specified and directed.

Cast iron cowls 50 mm for soil, waste and vent pipes complete all as specified and directed.

Vitreous china squatting pan, Orissa pattern, icluding cement concrete bedding, size 580 x 440 mm white with integral foot rests excluding flushing cistern and flush pipe but including connection to trap anti syphonage pipe etc. complete, fixed in repairs and complete all as specified and directed.

Rolled mild steel section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to grade Fe 290 (Gde E-165) complete all as specified and directed.

Cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching and forming branch channel (1/2 round or3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed.

Excavating over areas not exceeding 1.5 m deep and getting out in any type of soil complete all as specified and directed.

RCC M 25 design mix, using 20 mm graded stone aggregate as in foundation including rafts, footings foundation beams, plinth beams, bases for column etc complete all as specified and directed.

RCC M 25 design mix, using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed.

Form work to sides of concrete foundation footing bases for columns rough finished surfaces of concrete complete all as specified and directed.

Form work to sides of columns rough, Pillars, postsm struts square or rectangular finished surfaces of concrete complete all as specified and directed.

Mild steel steel TMT bars 10 mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping columns hooking ends and binding with mild steel wire annealed not less than 0.9 mm dia complete all as specified and directed.

All as per ser item No 157 but 5 mm dia and over upto and including 10 mm dia as in stirrups spacers and binders complete all as specified and directed.

Framed work as in doors and gates of angle or other section including stringers, braces etc. complete drilled for fixing of steel sheeting or other covering to doors etc. confirming Fe-410-O complete all as specified and directed.

1.6 mm thick plain sheeting as in wall clading steel gates and similar works cut to size holes punched including welding screws etc. complete all as specified and directed.

20 mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.63 mm thick crimpted/tapard at the external end slop of any colour having tansile strength 550 Mpa as in roof (ridge) covering fixed with self tapping screws and caps etc. complete all as specified and directed.

Rolled mild steel joist channels, angle or tee sections, fixed indepently without connecting plates etc. (cut to ordinary lebgth, fixed with hold fast and nails to floors and similar work welding and drilling of holes to floor for fixing of hold fast as per requirement of Gde Fe-410W (Gde E-250 quality) complete all as specified and directed by Engr-in-Charge.

Demolition cement concrete in ground floors and paving (unreinforced) not exceeding 15 cm thickness (below or above ground floor) complete all as specified and directed.

100 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

Wall care putty on walls including preparation etc. complete all as specified and directed. Make : JK Birla.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Providing reinforced cement concrete M-25 design Mix (using 20 mm graded aggregate) as in beams, cantilever, lintels over 1.5 m complete all as specified and directed.

Use and waste form work to sides of concrete foundation footing base of columns sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished flat surface of concrete complete all as specified and directed.

Use and waste form work to sides of columns, pillars, posts, struts, piers and stanchions, refctangular or square for rough finished flat surface of concrete complete all as specified and directed.

Use and waste form work to sides and soffit of floor or roof beams, beam hunching, girders, lintels, cantlievers, shelves including supports etc. for rough finished flat surface of concrete complete all as specified and directed.

All as per ser item No 157 but 6 to 8 mm dia complete all as specified and directed.

Aluminium drapery rod of 25 mm dia decorative type with wooden finish alongwith holding for brakets and end caps in repair complete all as specified and directed.

18/20 mm thick granite (of any type) work (table ribbed and polished) in pillars and likes in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Powder coated aluminium window side hung aluminum window frame or chowkhat 1.5 mm thick aluminium anodized of size 65 mm x 40 mm and window shutter frames (side rail, top rail, bottom rail and middle rail) 1.5 mm thick aluminium anodized of size 45 mm x 45 mm including all fitting such as ribber gasket aluminum glazing clips, locking arrangement and 75 mm aluminium handle and including 5 mm thick tinted plain glass in panels fixed with rubber, gasket and aluminum beads, aluminum tower bolt 100 mm, aluminium butt hinges 75 mm 02 No in each shutter complete all as specified and directed by Engr-in-Charge. (Size of window shall be as sper site requirement).

Powder coated aluminium window side hung aluminum window frame or chowkhat 1.5 mm thick aluminium anodized of size 65 mm x 40 mm and window shutter frames (side rail, top rail, bottom rail and middle rail) 1.5 mm thick aluminium anodized of size 45 mm x 45 mm including all fitting such as ribber gasket aluminum glazing clips, locking arrangement and 75 mm aluminium handle and including stainless wire cloth fixed with aluminum beads, aluminum tower bolt 100 mm, aluminium butt hinges 75 mm 02 No in each shutter complete all as specified and directed by Engr-in-Charge. (Size of window shall be as sper site requirement).

Powder coated aluminium frames and grill for door, window, ventilators with one or more rebates including jointing cleats for fixing etc. complete all as specified and directed.

Glazed anodised (15 micron) powder coated aluminium door made out of extruded section as standard door frame, single groove of size 100 x 45 x 2.5 mm thick standard shutter top and bottom section of size 95 x 45 x 2.5 mm thick standard shutter vertical section of size 80 mm x 45 mm x 2.5 mm thick complete with auto hydraulic floor mounted door closer handle special cylindrical lock, neoprene dry set, rubber gasket, with 12 m thick prelaminated (both side) particle board and 5 mm thick plain glass complete all as specified and directed.

Taking down carefully aluminium/copper point wiring complete with (light, fan, socket or power) complete fitting such as switch, sockets, ceiling rose, pendents sockets any type, rectangular board terminal boxes etc. and making good disturbed surface of walls , and complete all as specified and directed keeping aside serviceable item for re-use within the same bldg and removing unserviceable item from site.

Point wiring for one light point/fan point/Bell ponit controlled by one switch with 1.5 Sqmm PVC insulated FRLS unsheathed copper conductor single core multi stranded flexible copper cable in and including not less than 1.50 mm thick 20 mm dia & over concealed PVC non metallic rigid PVC conduit (ISI marked) with 1.5 mm thick pressed steel terminal boxes (modular type) concealed for fixing of modular switches/regulator etc. along with PVC insulated and insheathed FRLS 1.5 Sqmm multi stranded copper conductor cable (green color) as earth lead in and inculding PVC Concealed Conduit medium grade with all fitting (ISI make) complete all as specified and directed by Engr-in-Charge & including modular cover plate with frame, making good the disturbed surfaces to match with the existing specification. Make - Havells or equivalent make in polycab/finolex

All as per ser item No 180 but for 05 amp socket outlets point controlled by one switch on Independent board complete all as specified and diercted. Make - Havells or equivalent make in polycab/finolex

All as per ser item No 180 but for 05 amp socket outlets point controlled by one switch on Same board complete all as specified and diercted. Make - Havells or equivalent make in polycab/finolex

All as per ser item No 180 but for 3 pin 20 A socket outlet point controlled by one modular switch 20A on the independent board with 2.5 Sqmm size of copper cable as main and 2.5 Sqmm copper cable as earth lead complete all as specified and diercted.

Switch button single pole one way 5 amps 240 volt (Modular Type) with outer strip complete all as specified and directed. Note - All modular cover plate/modular flush Box/Switch/Sockets Incorporated with this, should be in same. Make - Havells/ legrand /Indoasian.

Switch piano fiush button single pole one way 20 amps 240 volt (Modular Type) with outer strip complete all as specified and diercted. Make - Havells/legrand/Indoasian

Sockets Combined 2-in-1, 3 pin 6 Amps, 240 Volt flush type (Modular Type) with outer strip, complete all as specified and directed. Make - Havells/legrand/Indoasian

Sockets Combined 2-in-1, 3 pin 20 Amps, 240 Volt flush type (Modular Type) with outer strip complete all as specified and directed. Make - Havells/legrand/Indoasian

Bell AC, Ding dong, 230 Volts, single pole with all acessories complete all as specified and directed. Make - Havells/legrand/ Indoasian

Bell Push, 6 amp, 230 Volts, 1 module (Modular type) complete all as specified and diercted. Make - Havells/Phillips

Ceiling rose surface bakelite, 3 terminals complete all as specified and diercted. Make - Havells/legrand/Indoasian

Replacement fan regulator 120W, 230V 50 C/S, deluxe Modular type electronic, step type hum free suitable control speed of fan from 0 to 100 % and connecting electrically all as required or complete all as specified and diercted by Engr-in-Charge. Make -Havells/legrand/Indoasian

Taking down carefully existing ceilling/exaust fan any type sweep and removing fan blade including cleaning all dust particle and filling cavities with filler material, oiling, greasing including painting fan with blade complete one coat of synthetic enamel white paint by spraying and assemble the same along with all fixing connecting accessories and fixing the same position along with all new electrical wire connection complete all as specified and diercted. Note - after completion of painting, if the proper surface smootheness, is not obtained at Engr-in-Charge satisfactory level, the painting will be re-done by the contractor at his own costs and the same shall be deemed to be included in the quoted rate.

Slim linear LED tube light fixture 20 Watt, with T8 polycarbonate 6500k Housing made of extruded AL with lumen O/P should not be less than 100 lum/watt making all connection using 1.5 Sqmm copper conductor multistranded PVC insulated 3 core flexible cable from ceiling rose to fitting drawn through PVC flexible conduit complete all as specified and diercted. Make - Havells, Cat Part No - (E-Lite LED Pride Plus Neo) LHEXACP7UN1W020 or equivalent make in Philips/Polycab

Slim linear decorative, wall mounting, SS finish fixture with opal glass diffuser suitable for LED lamp (Including LED lamp warm white) complete all as per the directions of Engr-in-Charge. Make - Havells Venza Cat Part No - LHJC02108499 or equivalent make in Polycab, wipro, C&S.

Slim linear LED lighting fixture 5 Watt LED Batten, For mirror light purpose, Complete making all connection using 1.5 Sqmm copper conductor multistarnd PVC insulated 3 core flexible cable from ceiling rose to fitting complete all as per the directions of Engr-in-Charge. Make - Havells (E-Lite LED Pride Plus Neo) LHEXBTP7IN1W005 or equivalent make in Philips/Polycab/Cromton

Designed, 2x2 LED panel 36 watt for ceiling (including electronic driver) which provides soft-light and glare free symmetrical illumination suitable for (600 x 600 x 70 mm) complete making all connection using 1.5 Sqmm copper conductor multistarnd PVC insulated 3 core flexible cable complete all as per the directions of Engr-in-Charge. Make - Havells (STRATO) Cat Part No : STRATO 2X2PLR36WLED840MOD

LED 12 watt square type slim Panel for surface complete dully fixed on suitable size complete all as per the directions of Engr-in- Charge. Make - Havells (Trim clipon square panel)

10 watt LED hexagon bulk head, IP66, Environmental friendly, ultra modern, energy saving, surface mounted, complete making all connection using 1.5 Sqmm copper conductor multistarnd PVC insulated 3 core flexible cable complete all as per the directions of Engr-in- Charge. Make - Havells (Hexa 10 W) Cat Part No - HEXAFT10WLED857SSYMBOPC or equivalent make in Philips/Polycab

Sub main wiring with two single core PVC insulated unsheathed, FRLS flexible copper conductor cable of size 10 Sqmm and one single core PVC insulated unsheathed, FRLS flexible copper conductor cable of size 6.0 Sqmm as earth lead in & inculding PVC casing/non metallic rigide PVC conduit medium grade and making good the distured at site or complete all as specified and diercted by Engr-in-Charge. Make - Havells or equivalent make in polycab/finolex.

Replacement of Sheet metal enclouser single pole and neutral with 2 pin and earth plug and socket 20A 240V complete with one single pole MCB of any cap from 10Amp to 20Amp, 10KA complete all as specified and directed. Make - Indoasisn or equivalent make in Legrand/Standard

Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification including taking down old one complete all as specified and diercted. Note - MCBs will be measured separately. Make - Indoasian/Legrand /Standard

Replacement MCB single pole 240 volt any rating from 10 to 32 amps, B-Series, with rupturing capacity 10 KA, inculding providing aluminium thimble for out going cable complete all as specified and diercted. Make -Schneider (Acti-9)/Siemens (Betagard-8GB32)/Havells

Replacement MCB Single Pole & Neutral 240 volt any rating from 40 to 63 amps, B-series, with rupturing capacity 10 KA, inculding providing aluminium thimble for out going cable complete all as specified and diercted. Make - Schneider (Acti-9)/Siemens (Betagard-8GB32)/Havells

VTPN MCCB DB-Double Door (Including 63 Amp MCCB) 16 kA (as Incommer) 4 way double door IP-43 protection complete all as specified and diercted. Make - Havells/ Schneider/L&T/Siemens. Note - Including All PCC & Cementing work for installation of TPN DB to Wall, deemed to be quoted rate by contractor.

Earthing complete with galvanised steel earth plate electode 600 mm x 600 mm x 6.00 mm thick burried directly in ground (earth pit not less than 2.25 meter deep below normal ground level connected to and including galvanised steel earth lead wire 4 mm dia by means of bolts, nuts, chock, nuts and washers of galvanised iron or steel including PCC Pit in 1:2:4 type B-1 angle iron frame with RCC cover and handle, excavation and earth work in any type of soil medium grade GI watering pipe 20 mm bore with funnel and wire mash and light grade GI protection pipe 15 mm bore upto main board complete all as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected to main control board as specified and testing completion complete all as specified and diercted.

LED street Light fitting 35 Watt, New generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 with acrylic, with Heat resistant toughened Glass, Corrosion resistant, complete making all connection with MCB SPN alongwith MCB Box enclosure complete all as per the directions of Engr-in-Charge. Make - Havells Cat Part No - LHETBXU7PAIS035 (ENDURA CITYLITE PLATINUM PLUS )

Street light Bracket complete made of GI pipe of suitable size, medium grade 1.2 m long bent to shape as per site requirement along with MS flat iron clamps with nuts, bolts, washers including grouting the same with wall complete all as specified and diercted by Engr-in-Charge.

Point wiring for one light point/fan point/Bell point controlled by one switch with 1.5 Sqmm PVC insulated FRLS unsheathed copper conductor single core multi stranded flexible copper cable in and including not less than 2.00 mm thick 20 mm dia & over concealed PVC non metallic rigid PVC conduit (ISI marked) with 1.25 mm thick pressed steel terminal boxes (modular type) concealed for fixing of modular switches/regulator etc. along with PVC insulated and insheathed FRLS 1.5 sqmm multi stranded copper conductor cable (green color) as earth lead in and inculding PVC Concealed Conduit medium grade with all fitting (ISI make) complete all as specified and diercted by Engr-in-Charge and including modular cover plate with frame, making good the disturbed surfaces to match with the existing specification. Make - Havells or equivalent make in polycab/HPL

All as per ser item No 208 but for 10 amp socket outlets point controlled by one switch on Same board complete all as specified and diercted.

All as per ser item No 208 but for 20 amp socket outlets point controlled by one switch on Independent board complete all as specified and diercted.

All as per ser item No 208 but for 3 pin 20 A socket outlet point controlled by one modular switch 20A on the independent board with 2.5 Sqmm size of copper cable as main complete all as specified and diercted.

Switch modular type, 1 module, 10 Amps, 230 volts one way complete all as specified and diercted. Make - Anchor/Havells/ Legrand

Switch modular type, 1 module, type 20 Amps 230 volts one way complete all as specified and diercted. Make - Anchor/ Havells/Legrand

Socket outlet modular type, 2 module, 5 pin, 10 Amps combined complete all as specified and diercted. Make - Anchor/ Havells/Legrand

Socket outlet, modular type, 2 module, 2-in-1, 20 Amps combined complete all as specified and diercted. Make - Anchor/ Havells/Legrand

Slim linear LED tube light fixture 20 Watt as per 4 Ft white, Garnet Batten, Housing made of extruded AL with lumen O/P should not be less than 100 lum/watt with wider beam angle should be greater than 120 deg and poly difuser CRI should be more than 70. & PF should be greater than 0.9 making all connection using 1.5 Sqmm copper conductor multistranded PVC insulated 3 core flexible cable from ceiling rose to fitting drawn through PVC flexible conduit complete all as specified and diercted.

Bulk head light fitting, 10 watt environmental friendly, ultra modern, energy saving, surface mounted, decorative Oval plastic shaped, LED luminaire comprising of high brightness LEDs, IP54 complete all as specified and diercted. Make - Havells (Ellipse Oval), Cat Part No : LHEXCGP7PN5W010

Sub main wiring with two single core PVC insulated unsheathed, FRLS flexible copper conductor cable of size 6 Sqmm and one single core PVC insulated unsheathed, FRLS flexible copper conductor cable of size 4.0 Sqmm as earth leade in and inculding PVC casing/non metallic rigide PVC conduit medium grade and making good the distured at site or complete all as specified and diercted by Engr-in-Charge. Make of cable - KEI/polycab /finolex

Switch piano type 5 Amps 230 volts one way complete all as specified and diercted. Make - Havells

Switch - socket combination 5 Amps, 5 pin multipurpose complete all as specified and diercted. Make - Havells

Switch - socket combination 15 Amps, 6 pin multipurpose complete all as specified and diercted. Make - Havells

Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link complete all as specified and diercted. Make - Havells/Legrand/L&T, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification. Note - MCBs will be measured separately.

Mettalic Exhaust fan 300 mm sweep 240V AC single phase complete with louvers/flap blade/ gravity shutter, including provison of flexible three core copper conductor cable of 23/.0076 upto ceiling rose complete making suitable holes on wall and making proper edges by plastering/white cement/putty and match with existing surface with colour/white oil distempering for fixing the same complete all as specified and diercted by Engr-in-Charge. Make - Havells (Turbo force Sp).

Supply & Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of Sqmm 10x3 core size complete all as specified and diercted including taking down old cable. Note : Earth work and other connected work shall be measured & paid seperately.

Point wiring for one light/fan/Exhaust Fan point controlled by one switch using 1.5 Sqmm FRLS copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit (thickness not less than 1.5 mm and 20 mm dia), medium grade with Modular metal flush boxes & metal back plate for mounting modular type in adequate module of switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 1.5 Sqmm as earth wire stranded and conected to earth dolly complete all as specified and diercted. Make: Havells/Finolex/ Polycab

All as per ser item No 225 but for 3 pin 5 Amps socket outlet independent including copper PVC insulated PVC unsheathed 1.5 Sqmm earth wire and connected to earth dolly complete all as specified and diercted.

All as per ser item No 225 but for 3 pin 5 Amps socket outlet on the same board including copper PVC insulated PVC unsheathed 1.5 Sqmm earth wire and connected to earth dolly complete all as specified and diercted.

All as per ser item No 225 but for 3 Pin 15 Amps socket outlet independent with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 1.5 Sqmm earth wire standard and connected to earth dolly complete all as specified and diercted.

All as per ser item No 225 but for 3 Pin 15 Amps socket outlet independent with cable 4.0 Sqmm including copper PVC insulated PVC unsheathed 2.5 Sqmm earth wire standard and connected to earth dolly complete all as specified and diercted.

Switch Piano flush type 6 Amps single pole one way (Modular Type) with outer strip complete all as specified and diercted. Make: Havells (Crabtree)/Legrand/Philips

Switch Piano flush type 16 Amps single pole one way (Modular Type) with outer strip complete all as specified and diercted. Make: Havells (Crabtree)/ Legrand/Philips

Socket 3 Pin 6 Amps flush type complete all as specified and diercted. Make: Havells (Crabtree)/Legrand/Philips

Socket combined 2-in-1, 3 Pin 6 & 16 Amps flush type (Modular Type) with outer strip complete all as specified and diercted. Make : Havells (Crabtree)/ Legrand/Philips

Single pole and neutral enclosure surface mounted 240 volts with 2 pin and earth plug and socket with one single pole MCB 20 Amps with indicator complete all as specified and diercted. Make: Havells/ Schneider/Legrand/HPL/Siemens.

Ceiling rose, surface bakelite 65 x 50 mm two to three terminals fixed on PVC Round Block complete all as specified and diercted. Make: Havells (Crabtree)/ Legrand/Philips

Wall Mounted Fan, Model Swing 400 mm complete all as specified and diercted. Make - Havells or equivalent to Bajaj/Crompton.

1 x 40 W Candle E14 wall mounted fancy light, SS finish fixture with opal PC diffuser suitable for 40W incandescent candle lamp complete all as specified and diercted. Cat Part No : LHJE01104499 Make : Havells/ Crompton/ Syska.

2x2 Pluto Neo LED 34 Watt Panel ceiling light environmental friendly, new generation, aesthetically designed, ultra modern recess mounting with high brightnes SMD LEDs as light source, suitable for armstrong complete all as specified and diercted. Make: Havells Cat Part No PLUTONEO2X2PLR34WLED857S or equivalent to Cromption/Syska.

Replacement MCB Single Pole, 230 Volt, Rating 6 to 32 Amps complete all as specified and diercted. Make: Havells/ Schneider/Legrand/HPL/Siemens

Replacement MCB Single Pole and Neutral, 230 Volt, Rating 35 to 63 Amps complete all as specified and diercted. Make: Havells/ Schneider/Legrand/HPL /Siemens

RAMAN CONSTRUCTION CO

Alishan Builders