COMP REPAIR/MAINT OF OTM/MDACCN/TRG CELL AND REPLACEMENT TO UNSV/OLD BR/EM ITEMS ALONGWITH REPLACEMENTTO OLD/ RUSTED/FETAL SHEDS/DOORS/ WINDOWS/ MOSQUITO PROOFING/ BROKEN TILES ETC INCLROOFTREATMENT OF P75, P64 OF DRC OFFICERMESS UNDERAGE (I) AYODHYA

Amount

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa of AZ 150 as in roof covering/cladding to wall and rain water gutter fixed with self tapping screws including dismantling plain or corrugated Asbestos cement (Corrugated, semi corrugated etc) sheet complete all as specified and directed by Engr-In-Charge.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa of AZ 150 as in roof covering/cladding to wall , fixed with self tapping screws including dismantling plain or corrugated Asbestos cement (Corrugated, semicorrugated etc) sheets in roof covering all as specified and directed by Engr-In-Charge.

Dismantling of framed work timber scantling 40 sqcm and over in section and in any position complete all as specified and directed by Engr-In-Charge

M&L steel work in tubular trusses/column, railing, grills etc incl special shaped washer etc complete using ERW or induction butt welded tube confirming to IS 1161:1979 grade 240 all as specified and directed by Engr-In-Charge

Material & labour for non skid ceramic coloured tiles 7mm to 8mm thick (Square /rectangular) area of each tile exc 0.11 Sqm and n.exc 0.18 sqm coloured in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement in 15 mm thick screed bed in CM 1:6 for floor tiles complete including dismantling of floor tiles incl cement mortar bedding but not backing removing serviciable tiles to stores complete all as specified and directed by the Engr-in-Charge.

M&L for glazed ceremic coloured tiled in vertical surfaces 450x300x7 mm thick(as approved by Engr-in-Charge) set and jointed in neat cement slurry and pointed in white or colour cement in 10 mm thick rendering in CM 1:4 for wall tiles to match including dismantling of wall tiles incl cement mortar bedding but not backing removing serviciable tiles to stores complete all as specified and directed by Engr-In-Charge

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area exc 1.5 Sqm but n exc 4.00 Sqm each all as specified.

M&L Rolled MS Joist, channel, angle, grill or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde- E-250) quality A all as specified and directed by Engr-In-Charge

Taking down shutter exc 1 Sqm n exc 2.00 Sqm each

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area not exc 1.5 Sqm each all as specified.

Taking down shutter n exc 1 Sqm each

S&f 30 mm thick factory made solid WPC(Wood plastic composite) moulded gauged door shutter comprimising of virgin polymer of K values 58-60 (suspension grade) calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)having minimum density of 650 kg/cum and screw withdrawl strength of 1800N (Face) & 900 N (edge)minimum compressive strength of 50 N/mm2 and resistance to spread of flame of class A Category with property of being termite/borer proof,water/moisture proof and fire retardant.WPC to be laminated with PVC Foil of minimum 14 microns thick of approved design plasted with hot melt adhesive on both faces of shutter with wiremesh in any no of division min 4 no pannels with brown wood grain texture including SS wire mesh (G-304) 0.36 mm minimum dia of wire and average width of aperture 1.4 mm shall be fixed with 15X15 square wpc beading in side rails with screwing 8X28 heat metal zinc coated screws can be remove or fix again after changing of wire mesh when be remove or fix again after changing of wire mesh when needed complete all as specified and directed by Engr-In-Charge

S&F 30mm thick factory made solid door with black board core moulded designed with sunmica sheets on both side and edges hydraulic hot pressed pasted with adhesives complete all as specified and directed by Engr-In-Charge

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed by Engr-In-Charge

S&F in repair 18 mm thick PVC sheet minimum 600 Kg Density grade 1 quality one side decorative lamination and other side plain white color to make kitchen cabinet/drawer/cupboard shutters fixed with epoxy coated screws solvent cement adhesive as per manufacturer instructions to make kitchen cabinet sides, top and bottom shelves inside complete all as specified and directed by Engr-In-Charge

S&F in repair 18 mm thick PVC sheet minimum 600 Kg Density grade 1 quality both side plain white color to make kitchen cabinet/drawer/cupboard shutters fixed with epoxy coated screws solvent cement adhesive as per manufacturer instructions to make kitchen cabinet sides, top and bottom shelves inside complete all as specified and directed by Engr-In-Charge

Supply only 75 mm dia oval shape brass handle fancy type polished bright finish complete all as specified and directed by Engr-In-Charge

S&F auto closing hydraulic (soft closing) chrome finish stainless steel hinge openable at 110 degree all as specified and directed by Engr-In-Charge

S&F magnetic catcher of size 20 mm X 50 mm suitable for cupboard shutter complete all as specified and directed by Engr-In-Charge

S&F factory made single extruded WPC (WOOD POLYMER COMPOSITE) solid door/window/ceosetory window and other frame/chowkhat of size 50x100mm comprising of virgin PVC polymer of K value 58 to 60 (suspension grade calcium carbonate and natural fibre (wood powder/rice husk/wheat husk and non toxic additives (maximum toxicity index of 12 for 100 grms complete all as specified and directed by Engr-In-Charge

Providing and fixing factory made single extruded WPC wod polymer composite and decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 suspension grade calcium carbonate and natural fibre (wood powder/rice husk/wheat husk and non toxic additives (maximum toxicity index of 12 for 100 grms complete all as specified and directed by Engr-In-Charge

S&F powder coated anodised aluminium window/ventilator shutter sliding type with styles, rails size 40mm x 20mm, frame for chowkat size 45 mm x 90 mm, fixed glazing, all are made from aluminium anodised section including necessary jointing cleat, glazing clips, rubber packing, anodised aluminium snap beading, screws of suitable size with and including 4mm thick frosted glass /plain glass etc complete as specified. Note:- (i) Two Nos of track to be provided. (ii) In two tracks, shutter with frosted glass /Plain glass and fixed Stainless steel wire mesh on frame. (iii) Thickness of aluminium section shall not be less than 1.00 mm)

S&F powder coated anodised aluminium window and ventilator shutter side/top hung type without sash bar aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips,rubber packing ,anodised aluminium snap beading ,screw anodised aluminium fitting such as peg stays 150 mm long (1 no) hinges type B-21 100 mm long (2 no) suitable handle 1 no complete all as specified and directed by Engr-In-Charge

S&F aluminium (min thickness of powder coating 50 micron) for shutter of door ,window & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings where required including the cost of EPDM rubber/neoprene gaskets required.(Fitting shall be paid seperately ) with extruded builtup standard tubular sections/appropriate Z sections and other section of approved make confirming to IS:733 and IS: 1285 fixing with dash fasteners of required dia and size including necessary filling up gaps at junction i,e at top,bottom and side with required EPDM rubber/neoprene gasket etc Aluminium sections shall be smooth ,rust free ,straight,mitred and jointed mechanically where required including cleat angle,aluminium snap beading for glazing /paneling C.P. brass/stainless stell screws all complete as per architectural drawing and the directions of Enginer-in-charge

M&L for 4.0mm frosted/tinted thick sheet glass ordinary quality and glazing with beading n exc 0.5 sqm in each pane complete all as specified and directed by Engr-In-Charge

S&F 140mm Floor door stopper of aluminium alloy body and tongue, with hard drawn steel spring all as specified and directed by Engr-In-Charge

S&F 100mm long stainless steel hinge pin complete all as specified as directed by Engineer-in-Charge

S&F steel tower bolts 200 mm complete all as specified as directed by Engineer-in-Charge.

S&F 125 mm long steel handles complete all as specified as directed by Engineer-in-Charge.

S&F steel sliding door bolt 250mm long with hasp, staple (bolt type) and fixing with four numbers nut and bolts complete all as specified as directed by Engineer-in-Charge.

M&L for Welded steel wire fabric supplied and fixed complete to wood or steel members incl necessary welding n exc 4 Kg complete all as specified and as directed

Supply and fix 500 liters capacity PVC water storage tank, rotational moulded, (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete and including dismantling of PVC/RCC complete all as specified and directed by Engr-In-Charge

Supply and fix 1000 Ltr capcaity PVC water storage tank, rotational moulded (cylindrical vertical with closed top hoisted fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete and including dismantling of PVC/RCC complete all as specified and directed by Engr-In-Charge

S&F in repair 20 mm dia Gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipes and fixed all as specified and directed by Engr-In-Charge.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar all as specified and directed by Engr-In-Charge

M & L for green Marble work 18 to 21 mm thick (table rubbed and polished) in steps,riser jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types complete all as specified and directed by Engr-In-Charge

M&L for one coat of oil bound distemper after preparation of old decorated distempered surfaces on walls surfaces of approved tint and make all as specified and directed by Engineer in charge

M&L for preparation of old surfaces of walls by complete removal of existing treatment and applying Wall care white ( Putty) thickness not less than 2mm and sand papering surfaces to achieve smooth surfaces complete all as specified all as specified and directed by Engr-In-Charge .

M&L for preparing old undecorated surface of wall etc including cleaning with broom and applying one coat of exterior weather proof paint complete all as specified and as directed by Engr-in-Charge

M&L for preparation of old decorated distempered surfaces and applying two coat of distemper oil emulsion on walls surfaces of approved tint and make all as specified and directed by Engineer in charge

M&L for preparing old undecorated surface of wall etc including cleaning with broom and applying two coat of exterior weather proof paint complete all as specified and as directed by Engr-in-Charge

Demolition of PCC of any description and in any position not specifically provided for complete all as specified and directed

M&L for PCC 1:2:4 type B0 (using 12.5 mm grd stone agg) in roof padding finishing the surface fair & even all as specified and directed by Engr-In-Charge.

M&L for water proofing treatment to roof surface with APP water proofing membrane 3mm thick & weighing not less than 3.00 Kg/Sqm of approved make, black finish and reinforced with non woven polyester matt of min 150 gm/sqm laid over a coat of bitumen oil based primer conforming to IS-3384 @ 0.4 Ltr/Sqm over prepared roof surface, forcing overlap with a propane or a butane gas torch with a overlap of 75mm at sides & 100 mm at ends & sealing as per manufacturer instruction over complete all as specified and directed. (Note : Height of bldg upto 6 mtr).

M&l rendering 10 mm thick in cement mortar 1:3 over roof slab finished even & fair complete. Note : Rendering shall be done using coarse sand only.

Dismantling brick tiles or terracing tiles, single layer on roofs all as specified and directed.

M & L except brick 40mm thick brick tiles laid on 15mm thick cement mortar 1:6 and joints grouted flush in cement mortar (1:3)

M&L for 300x300x7.2 mm thick size roof cool tile with solar reflective index (SRI) value upto 98 degree to reduce room temeperature slip resistance in CM 1:6 and pointing in CM 1:3 over 15 mm thick screed bed complete all as specified and directed. Make-Johnson,orient bell or equivalent all as specified and directed by Engr-In-Charge and approved AGE(I)

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings heads, shoes, bends, swan-necks, etc., incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories)

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified and directed by Engr-In-Charge

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified and directed by Engr-In-Charge

S&F in repair 110mm PVC (SWR) bends any radius all as specified and directed by Engr-In-Charge

S&F in repair 75mm PVC (SWR) bends any radius all as specified and directed by Engr-In-Charge

Preperation of new surfaces of steel of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over primer complete all as specified and directed by Engr-In-Charge

R K BROTHERS (BID ID -3477182)

SAI RAM ASSOCIOATES (BID ID -3477291)