SPL REPAIR OF BOUNDARY WALL FOR CERTAIN QTR IN FAFA DILKHUSHA QTR AND MISC WORKS UNDER AGE BRII AND SPL REPAIR OF INTERNAL WIRING AT RC ECHS OFFICE ARA BK NO 02 AT DANAPUR UNDER GE DANAPUR CANTT

Amount

Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed.

Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Boring holes 3m deep in soil for Single under reamed piles and getting out and disposal of soil to a distance of n.exc 50m (dia of pile 300mm) complete all as specified and directed.

Excavation in trenches in soft/ loose soil not exc 1.5m wide and not exc 1.5m deep for foundation, pier holes etc n. exc 10sqm on plan and getting out complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundation, filling and mass concrete complete all as specified and directed.

M&L reinforced cement concrete M-25 design mix using 20mm graded stone aggreagate as in foundation, footing, foundation beams, plinth beams, bases for columns, pedestal, under reamed piles, mass concrete, etc complete all as specified and directed.

M&L reinforced cement concrete M-25 design mix using 20mm graded stone aggreagate as in columns, pillars, posts, struts etc complete all as specified and directed.

M&L reinforced cement concrete M-25 design mix using 20mm graded stone aggreagate as in coping, beams, cantilevers, bressummers, Lintels over 1.5m span etc complete all as specified and directed.

M&L Form work to sides of concrete foundations, footings, bases of columns raft, beam sides and soffits (if any) of foundations & plinth beams and similar wk etc rough finished surface of concrete complete all as specified and directed.

M&L Form work to sides of pillars, posts, struts, piers, columns stachions flat with rough finished surface of concrete complete all as specified and directed.

M&L Form work to sides of concrete floor or roof beams, beam haunchings, bressummers, lintels, cantilevers, shelves including supports overhangs etc also sprays between floor beams, etc on flat with rough finished surfaces of concrete complete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cracking, bending, spirally for hopping for columns hookings ends and binding with and incl mild steel wire (annealed) not less the 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 13 above but 5 mm dia and over in stirrups, spacers and binders complete all as specified and directed.

M&L for old size Brick work with sub- class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

All as per item No 15 above but except bricks

Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L 15mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and fair complete all as specified and directed.

All as per itme No 18 above but on other than fair faces.

M&L for applying two coats of cement base paint on new plastered wall surfaces over a coat of primer incl preparation of surfaces etc complete as all specified and directed.

M&L Preparing old painted surfaces of walls, chajjas etc by washing rubbing down and stopping and applying two coats of cement base paint white or tinted complete all as specified as directed.

M&L for two coats of weather coat paint (apex) on old surfaces of wall including preparation of old plastered surfaces complete all as specified and as directed.

Returning filling in inclunding spreading , levelling ,watering and well raming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated material exc 50m but n exc 150m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed..

S&F MS angle Iron as in fencing posts/angle horn and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc conforming to Fe 410-O or Fe 310-O complete all as specified and directed.

S&F Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or typing at crossing with and provision of galvanised MS wire stapples or steel pins etc as directed (each line wire to be measured).

Dismantling structural steel work including doors / gates but excluding framed truss etc complete all as specified and directed.

S&F framed work as in doors or gates of angles or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete incl pintel hinges, stops hand made sliding bolts etc conforming to Fe 410-W (Gde-E-250) quality-A, complete all as specified and directed.

M & L for preparation of new /old steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

Supply, stretch and fix concertina coil 600mm dia in stress position hot deep galvanised steel wire coated with CLR anti corrosive paints making diamond shape with the help of dove tail clips (18 SWG), the concertina coil is to be fixed with barbed wire at points where coil touched the bottom barbed wire with the help of lug rings (24 SWG) including all fittings like fastener clips, steel lug rings etc complete all as shown in drg all as specified and directed. Note: (i)Stretch length of each coil shall be 6 mtr. (ii)weight of each coil shall not be less than 9kg.

Taking down carefully aluminium point wiring(any type)for one light point, fan point ,exhaust fan point, bell point, power point complete including all fittings such as switches, socket, pendents holder, ceiling rose, sketch fittings, tube light fittings, regulatores unscrewing the switch sockets, ceiling rose, regulators from boards/outlet boxes and making good the disturbed surfaces of wall/ ceiling and colour washing matching with the existing colour wash all as specified and directed.

M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one light/fan/bell/buzzer / exhaust fan point controlled by one, one way switch, including concealed pressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 2.8 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed.

All as item No. 32 here-in-before but one 3 pin, 5amp socket outlet on independent board complete all as specified and directed.

All as item No.32 here-in before but 3 pin ,5 amp socket outlet on the same board with other switch complete all as specified and directed.

M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 4.0 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one light/fan/bell/buzzer / exhaust fan point controlled by one, one way switch, including concealed pressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 2.8 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 4 Sqmm FR type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site & including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed.

M&L sub main wiring with two single core PVC insulated & unsheathed cable 6.0 Sqmm (nominal area) FRLS type having multi-stranded copper conductor drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring with and including 6.0 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as earth wire connected to common earth as per IS & cutting chasing for conduit & sinking for boxes & making good to walls disturbed surface & applying finishes to match existing surface complete including taking down of exsting sub main wiring complete all as specified and directed. NOTE : Two runs of 6 Sqmm and one run of 6.0 Sqmm cable and PVC conduit shall be measured as a one unit length.

M&L for sub main wiring with PVC insulated 1100V grade FRLS single core multi stranded copper conductor cable of size 2x4 sqmm + 1x4 sqmm as earth continuity cable passing through and including 25/20mm dia PVC conceal conduit all as specified and directed by Engr-in-Charge. Note - Two runs of 4sqmm including one run of 2.5 sqmm including PVC conduit shall be measured as unit length.

S & F Modular metal flush box 1/2 module

S & F Modular metal flush box 3 module

S & F Modular metal flush box 8 modules(Horizontal)

S & F modular white cover plate 1 module

S & F modular white cover plate 2 module

S & F modular white cover plate 3 module

S & F modular white cover plate 8 (Horizontal) modules

S&F modular bell push, flush type, single pole, one way 5/6 Amp 230 volts complete all as specified and directed.

S&F electric bell ding dong type AC 230 Volts, 50 Hz single pole complete all as specified and directed.

Supply & fixing switch modular flush type 6 amps, single pole, one way complete all as specified and directed.

Supply & fixing socket modular flush type suitable for 6 amp, 2/3 module combined 2 module complete all as specified and directed.

Supply & fixing switch modular flush type 16 amps, single pole, one way complete all as specified and directed.

Supply & fixing socket modular flush type suitable for 6/16 A, 2/3 pin combined 2 module complete all as specified and directed.

S&F ceiling rose single phase , PVC poly carbonate,insulated body three terminals ISI marked complete all as specified and directed.

S&F sheet metal enclosure for 4 way TPN DB double door 415 Volt with 200 amp rated bus bar complete with suitable for 1 x 63Amp TPN as incomer and MCB SPN as outgoing connection through proper size of lugs and cable glands including taking down existing MCB DBs complete all as specified and directed.

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of 4 poles and current carrying capacity 63 Amp in the DB complete with connection testing and commissioning.

S& F for sheet metal enclousre factory made for MCB DB's SPN, 8 way, double door, 240 Volts with 200 Amp rated bus bars including taking down existing unserviceable MCB DB complete all as specified and directed.

S&F Isolator/MCB SP 240 Volt 6 TO 40 Amp ISI marked conforming to 'B" curve, breaking capacity 10 KA complete all as specified and directed.

S&F Isolator / SPN 40 amp 30mA for earth leakage. Over load and short circuit protection ISI marked complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below GL with top edge of plate not less than 1.50 m below normal ground level) connected to galavanised earth lead wire 4.0 mm dia (7.5m) as means of bolts, nuts, check nuts and washer besides brazing at all joints as shown on drawings and including excavation, earth work, GI pipe (ISImark) light grade 15 mm bore for protection of GI wire from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt, PCC 1:3:6, type C-1(using 20 mm graded crushed stone aggregate ) chamber and mild steel angle iron frame 40 x 40 x 3 mm and 40 mm thick pre-cast RCC cover 1:2:4 , type B-1(using 20 mm graded crushed stone aggregate ) reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with mild steel handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade(ISI marked) for watering all as shown in electrical plate No 3 of SSR Part-I and connected to earth test point including testing of earthing & dismantling /taking down existing old / unserveciable earthing complete all as specified and directed. (Note:- The rates quoted shall also deemed to include the cost of Earth test point and earth wire and protection pipe upto 7.5 meter beyond the earth plates electrode.)

Supply & fixing fan regulator, modular type, 120 watt single phase complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. .

Supply & fix exhaust fans of metallic body heavy duty AC single phase 230/ 240 V of size 300 mm sweep with bracket, louver shutters, nuts & bolts including connection with PVC copper flexible wire for Exhaust fans complete all as specified and directed.

S & F Building security/street LED light fitting 35 watt IP-65 protection pressure diecast alluminium body ,heat resistant glass ,including driver and making necessary electric connection with 2.5 sqmm twin core copper wire 1.5 long complete fixed in GI pipe fixed to pole complete all as specified and directed.

M/s Mukesh and company (BID ID -3300585)

M/S SAROJ KUMAR SINGH (BID ID -3300648)