Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.9 LAccepted-Finance | L1 | Accepted-Finance Being lowest bid L1 | |
| 2 | L2₹10.0 L+₹5,215.73 (0.53%)Rejected-Finance | L2 | Rejected-Finance Being higher than L1 Bid | |
| 3 | L3₹10.0 L+₹10,395.30 (1.05%)Rejected-Finance | L3 | Rejected-Finance Being higher than L1 Bid |
| Sl No | Description | Qty | Unit | GAUTAM ENTERPRISES L1 | M/s. Janki Enterprises L3 | Aien Meren Enterprises L2 |
|---|---|---|---|---|---|---|
| 1.00SCHEDULE ‘A’ PART-I (REPAIR/MAINT OF RAIN SHED) | ||||||
| 1.01 | Earth work in excavation by mechanical means (Hydraulic excavator)/
manual means over areas (exceeding 30 cm in depth, 1.5 m in width as
well as 10 sqm on plan) including getting out and disposal of excavated
earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil | 14.94 | Cum | 305 ₹4,556.7 Lowest | 307 ₹4,586.58 | 306 ₹4,571.64 |
| 1.02 | Providing and laying in position cement concrete of specified grade
excluding the cost of centering and shuttering - All work up to plinth
level :1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural
sources : 4 graded stone aggregate 40 mm nominal size
derived from natural sources) | 6.64 | Cum | 10,100 ₹67,064 Lowest | 10,105 ₹67,097.2 | 10,103 ₹67,083.92 |
| 1.03 | Centering and shuttering including strutting, propping etc. and removal
of form work for : Foundations, footings, bases for columns | 29.52 | Sqm | 400 ₹11,808 Lowest | 403 ₹11,896.56 | 402 ₹11,867.04 |
| 1.04 | 12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) | 29.52 | Sqm | 370 ₹10,922.4 Lowest | 372 ₹10,981.44 | 371 ₹10,951.92 |
| 1.05 | Fixing only of Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and
applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. Hot finished welded type tubes. (Free for fixing) pipe will be issued from Dept. | 2,294.69 | Kg | 70 ₹1,60,628.3 Lowest | 72 ₹1,65,217.68 | 71 ₹1,62,922.99 |
| 1.06 | Steel work in built up tubular (round, square or rectangular hollow tubes
etc.) trusses etc., including cutting, hoisting, fixing in position and
applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete.Hot finished welded type tubes | 2,190.7 | Kg | 240 ₹5,25,768 Lowest | 242 ₹5,30,149.4 | 241 ₹5,27,958.7 |
| 1.07 | Providing and fixing precoated galvanised iron profile sheets (size,
shape and pitch of corrugation as approved by Engineer-in-charge)
0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120
grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns
epoxy primer on both side of the sheet and polyester top coat 15-18
microns. Sheet should have protective guard film of 25 microns
minimum to avoid scratches during transportation and should be
supplied in single length upto 12 metre or as desired by Engineerin-
charge. The sheet shall be fixed using self drilling /self tapping
screws of size (5.5x 55 mm) with EPDM seal, complete upto any
pitch in horizontal/ vertical or curved surfaces, excluding the cost of
purlins, rafters and trusses and including cutting to size and shape
wherever required. (Free for fixing) PPG Sheet issued from dept. | 313.34 | Sqm | 212 ₹66,428.08 Lowest | 214 ₹67,054.76 | 213 ₹66,741.42 |
| 1.08 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet
fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I.
limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/m² | 102.4 | Metre | 975 ₹99,840 Lowest | 977 ₹1,00,044.8 | 976 ₹99,942.4 |
| 1.09 | Finishing with Epoxy paint (two or more coats) at all locations prepared
and applied as per manufacturer's specifications including appropriate
priming coat, preparation of surface, etc. complete. On steel work | 191.18 | Sqm | 240 ₹45,883.2 Lowest | 242 ₹46,265.56 | 241 ₹46,074.38 |
Tender Value
Refer Docs
EMD Value
₹20,000
Closing Date
7 Aug 2025, 11:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SO1 (Wks), HQ 5 Sect AR
SO1 (Wks), HQ 5 Sect AR
Repair and Maint of Rain Shed from Road to OR Family Lines of Chieswema Grn
2025_ARMHA_870646_1
VIII.28028/HQ 5 Sect/MW/Engr/2025-26/12
Open Tender
Civil Works
Item Rate
180 days
Chieswema
As per Tender Documents
2 documents required · 2 mandatory
₹1,000
SO1 (Wks) HQ 5 Sect AR
₹20,000
17 Sept 2025
26 Jul 2025
8 Aug 2025
26 Jul 2025
7 Aug 2025
26 Jul 2025
26 Jul 2025 - 7 Aug 2025
Amount
SCHEDULE ‘A’ PART-I (REPAIR/MAINT OF RAIN SHED)
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources)
Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns
12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand)
Fixing only of Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. Hot finished welded type tubes. (Free for fixing) pipe will be issued from Dept.
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Free for fixing) PPG Sheet issued from dept.
Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/m²
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work
Aien Meren Enterprises (BID ID -3262235)
M/s. Janki Enterprises (BID ID -3262324)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .