Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.5 LAccepted-AOC A 111 JHILMIL COLONY EAST DELHI 110095 | SHAHDARA | DELHI | 110095 | L1 | Accepted-AOC work order has been awarded | |
| 2 | L2₹3.0 L+₹52,403 (21.2%)Rejected-Finance UC I USHA PARK HARI NAGAR NEW DELHI 64 | NEW DELHI | DELHI | 110001 | L2 | Rejected-Finance Not L1 |
Tender Value
₹2.3 L
EMD Value
₹4,650
Closing Date
15 Dec 2022, 1:00 pmClosed
EEE-I Shah(S)
Office of the Executive Engineer (Elect)-I Room No.5 First Floor Vishwakarma Nagar Near Hanuman Mandir Jhilmil Colony Delhi-110095
Renovation/ Rewiring of Homoepathic Dispensary trilokpuri,26 block under Shahdara South Zone
2022_EDMC_137677_1
EE (Elect)-I//2022-23/7.2
Open Tender
Electrical Works
Item Rate
90 days
work
Please refer to tender documents
4 documents required · 4 mandatory
₹500
₹4,650
23 Oct 2024
8 Dec 2022
16 Dec 2022
8 Dec 2022
15 Dec 2022
8 Dec 2022
Amount
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group C
Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel/PVC conduit inculding dismantling as required. Group"C"
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3x4 sq.mm
3x6 sq.mm
Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 A switch
3 pin 5/6 A socket outlet
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 1. 8 WAY Double door
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. A. 63 A
Suppy and fixing following rating double pole ,240V, residual current circuit breaker having sensitivity current 30 mA in existing mcb db complete with connections,testing,commissioning etc as required . A. 25 A
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required. (Clamped with 1 mm thick saddle)
Supply of XLPE Insulated PVC Sheathed Al. conductor armoured cables for working voltages upto 1.1kv conforming to IS7098 as required. 2x10sqmm
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia includingaccessories, and providing masonry enclosure with cover platehaving locking arrangement and watering pipe etc. (but withoutcharcoal/ coke and salt) as required.
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
SITC of 1200 mm sweep BEE 5 star rated AC ceilling with brussless direct current motor, class of insulation:B, 3 nos. blade,30cm down road 2 nos. canopies shackle kit safety ropr,copper winding, power factor not less than .9,service value minimum 6.85,air delivery minimum 215 cmm,350 rpm,THD less than 10%,remote or electrnoic regulator unit for speed control and all remaining accessories including safety pin nuts,bolts,washertemperature rise=75 degree,insulation resistance more than 2 megha ohm,suitable for 230 v,50 hz,single phase ac supply, earthing etc complete as required fan for suitable for 230 V, 50 Hz AC supply.
Supply of 1.5 TR Split Type Air Conditioner (5 star rating) along with Installed Copper piping & 3 Core suitable copper wire, PVC hard drain pipe with remote suitable for 230V AC. supply complete as required.(upto 6 Mtr.)
Standard Installation charges for Split AC including labour and all items required for installation complete as reqd.
Supply & fixing of extra angle iron stand suitable for 1.5 TR Split Type Acs out door unit complete as reqd.
Extra for copper piping with proper insulation with PVC hard drain pipe and 3 core copper wire suitable for 1.5 TR Split type AIR Conditioner complete as reqd.
P&F of 4KVA Voltage Stabilizer with TDR and Triple step, High & low voltage cut off device complete as reqd.
SITC of LED Tube type luminaire 20 watt rating complete with Extruded Aluminum Batten prewired with high efficient LED with following specification. a) total system wattage=20watt+/-5% b) Luminous efficacy >=95 luminus/watt c). power factor >=.95
Supply of 60 Watt LED flood Light luminaire fitted with lens made of pressure die cast aluminium housing and toughened glass cover i/c mounting bracket complete with following specifications. a) LED Wattage 60 ±5% b) Luminaries O/P=6000 lumens c)Luminaries efficacy ≥ 100 lumens/watt d) Pf ≥ 0.95 e) CCT -5500K TO 6500 K f) CRI >70 g) Protection -IP66
P/F hot press sheet moulded fire retardant( Temp. resustance upto 200 degree c) IP55 weather proof pole box of inner dimenson 2000x160x98mm complete with suiatable arrangement for fixing 1 no. of 6 to 32 amp singkle pole MCB( MCB/Isolator excluded) with netural link dully shorting on DIN Channel with 2 nos. of MS clamps with SS back plate of suitable size with danger monogram property printed on the cover etc as required.
'S/F of Compartment alized cubical type panel board duly powder coated made out of 16 SWG.M.S sheet with insulated copper Bus bar i/c interconnection copper wiring arrangement for mounting for switch gear ,changeover switches ,MCCB i/c making the foundation brick work/angle iron frame on floor/wall with proper locking arrangement etc complete as required at site. '
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel making connection etc as required. 100 A, 16kA TPMCCB
200 A, 35KA TPMCCB
Supplying and fixing metal box of 180mm x100mmx60mm deep (Nomial Size ) on surface or in recess with suitable size of phenolic laminated sheet cover in including providing and fixing 6 pin 5/6 and 15/16A socket out let and 15/16A pino type switch connections, painting etc. as required.
SITC of 10 inch(250mm) sweep fresh air fan heavy duty complete with shutters,blades etc as reqd.
SRI BALAJI ELECTRICALS
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .