Procurement of Office Furniture for Govt. Degree College Paloura, Mishriwala

Amount

Main Table :- W1500 x D750 x H750 mm With ERU

Supplying & Placing Modular table in completely knock down conditions with an overall size 1500mm X 1650mm X 750mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The work top shall have the size 1500mm X 750mm made up of 25mm thick particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The table top profile shall be in rectangle shape with front and back full round post form and other edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The table top shall be supported over particle board base gable end. The end wall of the table on the side shall be topped by gable end. The gable end shall be made up of 25mm thick particle board and profile shall be in linear shape with front and back full round post form and other edge with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick pre-laminated particle board with appropriate PVC edge banding connected with both end. There shall be buffers provided at the base to avoid scratches on the floor. The table shall be supplied with side unit for storage purpose with an overall size 900mm X 450mm X 750mm. The side unit shall be made up of Pre-laminated particle board of grade II of IS 12823 with top 25mm thick and other parts 18mm thick like shutter, back, side panel etc. It shall have 2 sliding shutter which slides over sliding rail track. The shutter shall be operated with the assistance of SS handle and Multi-purpose (MP) locking mechanism. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. A mobile pedestal shall be provided with an overall size 400mm X 450mm X 680mm. The pedestal shall be made up of Prelaminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel and ball bearing channel having to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. The pedestal shall be mounted over 50mm injection moulded nylon castor

HOD Main Chair

Providing and supplying a high back chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood padded with high resilience polyurethane foam (30+25)mm thick having density (40 & 32)kg/m³ and the back shall be made of (15+6)mm thick double layered moulded plywood padded with high resilience polyurethane foam 30mm thick having density 32kg/m³. The same shall be upholstered with leatherette tapestry 1mm thick and 571 GSM. The backrest shall be made by keeping the natural curvature of the spine which helps to provide lumbar support & full back support as well as head support. The chair shall be supplied with chrome plated arm with cushion having leatherette covering top. For seating durability the chair shall have knee tilt 360 degree revolving mechanism having four position locking and tilt tension adjustment with anti-shock feature which provides back strength for the chair. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with standard class-3 gas-lift to suit them using the lever under the seat. The Pedestal should have five legged MS CRCA chrome plated having pitch circle dia. 700 mm fitted with 5 nos. twin wheel castors. The castors of the chair shall be injection moulded in black 30% glass filled nylon. The seat size shall be 515±10 mm (D) X 545±10 mm(W) and back size shall be 560±10 mm(W) X 700±10 mm(H) from seat. Overall height shall be = 1155±10 mm, overall depth/width = 760±10 mm

Visitor Chair

Providing and supplying a Visitor chair with ergonomic design for user comfort & aesthetically appealing. The seat and back shall be made of hot pressed commercial plywood 15mm thick and 12mm thick padded with high resilience polyurethane foam 40mm thick having density 40kg/m³ in seat and 40mm thick having density 32kg/m³ in back. The same shall be upholstered with leatherette tapestry 0.8mm thick and 535 GSM. The chair shall be supplied with cushion arm with leatherette covering top mounted on metal frame. The frame structure shall be supported by four legs made up of MS CRCA powder coated 50-60μ thick tubular pipe of size 40mm X 20mm with 1.6mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 490±10 mm (D) X 560±10 mm(W) and back size shall be 530±10 mm(W) X 420±10 mm(H) from seat. Overall height shall be = 860±10 mm, overall depth = 690±10 mm & overall width = 620±10 mm

HOD Centre Table W1200xD600xH450mm

Supplying & placing Center table with an overall size 1200mm X 600mm X 450mm. The top shall be made up of 30mm thick Prelaminated particle board of grade II of IS 12823. The profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The lower shelf shall be made up of 18mm thick Pre-laminated particle board. The under structure shall consist of SS 202 grade shiny chrome finish pipe frame having cross-section area 30mm X 15mm. There shall be shoe provided at the bottom to avoid scratches on the floor.

HOD Corner Table

Supplying & placing Corner table with an overall size 600mm X 600mm X 450mm. The top of the table shall be made up of 30mm thick Pre-laminated particle board of grade II of IS 12823. The top profile shall be in square shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The lower top of the table shall be made up of 18mm thick Pre-laminated particle board. The under structure shall have SS 202 grade with shiny chrome finish pipe frame with cross-section area 30mm X 15mm. There shall be shoe provided at the bottom to avoid scratches on the floor

Discussion Round Table

Supplying & Placing Conference table in completely knock down conditions with an overall size Dia. 900mm X 750mm that is to be assembled at site. The table top shall have the size 900mm Dia. made up of 36mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The table top profile shall be in circular shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The table shall be supported over particle board base gable end. The end wall of the table on the side shall be topped by gable end. The gable end shall be made up of 36mm thick Pre-laminated particle board and profile shall be in linear shape and sealed with appropriate PVC edge banding. There shall be buffers provided at the base to avoid scratches on the floor.

Centre Table

Supplying & placing Center table with an overall size 1200mm X 600mm X 450mm. The top of the table shall be made up of 12mm thick toughened glass with bevelled edges. The profile shall be in rectangle shape with round corner. The top shall be supported on MS chrome plated tubular frame with cross- section area 40mm X 20mm with 1.6mm thick. The under structure shall consist of four legs made of MS chrome plated oval pipe having cross-section area 52mm X 26mm with 1.6mm thick. There shall be copolymer polypropylene shoe provided at the bottom to avoid scratches on the floor

Corner Table

Supplying & placing Corner table with an overall size 600mm X 600mm X 450mm. The top of the table shall be made up of 12mm thick toughened glass. The top profile shall be in square shape with round corner and the edges shall be in chamfer shape. The top shall be supported on MS chrome plated oval frame with cross-section area 40mm X 20mm with 1.6mm thick. The under structure shall consist of four legs made of MS chrome plated oval pipe having cross-section area 52mm X 26mm with 1.6mm thick. There shall be co-polymer polypropylene shoe provided at the bottom to avoid scratches on the floor

Personal Locker Unit

Overall size of Personal Locker Unit with add on units shall be of dimensions 760mm(W) X 450mm(D) X 1800mm(H) having 12 locker unit. Stack ability shall have add - on units that can be stacked width wise to form bank of lockers having common side panel. Locking shall have cam lock with lock lever plus option. Material shall be CRCA 0.8 mm thickness. Shelf shall be uniformly distributed load capacity per each shelf level is 35 Kg maximum. Finish shall be epoxy polyester powder coated to the thickness of 50 microns. Handle/Label holder shall be aesthetically appealing Snap fit ABS plastic handle. Ventilation shall be attractive punched pattern for ventilation.

Steel Almirah Unit 900mm (W) X 450mm (W) X 930mm (H)

Providing, supplying and placing Steel Almirah in perfectly upright and straight position. The overall size of the Almirah shall be 900mm (W) X 450mm (W) X 930mm (H) including legs. The Almirah shall be supplied with 2 nos. adjustable shelves i.e. 3 loading compartments. Door shall be made of 1mm thick and all other components shall be made of 0.8mm thick high yield strength CRCA sheet of grade ‘D’ confirming to IS: 513. Stiffeners shall be provided in shelf & door. The steel hinged door shall be provided with locking mechanism and ABS plastic handle. The shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. Uniformly distributed load capacity per each shelf shall be 40kg maximum. The complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to thickness 40-60μ. Adjustable leveller shall be provided with metal insert to resist scratches on the floor and also level & support structure.

urban interiors