REPAIRS MAINTENANCE OF DISTRIBUTION OF TRANSFORMER, LT UG CABLE, EARTHING 2, 4 POLE STRUCTURE, LT PANEL, STREETS LIGHTS, GATE LIGHTS, BUILDING SECURITY LIGHT , AIR BREAK SWITCHES AND ALLIED WKS AT CGDHQ-10, CGPS AND FUEL COMPLEX UNDER GE (I) CAMPBELL

Amount

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. n exc 10 sqm on plan and n exc 1.5m in depth and getting out in any type of soil complete as specified and as directed.

Returning, fillingin, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soil all as specified and directed.

Removing excavated materils (soil) not exc. 50m and depositing where directed at a level not exc 1.5m above the starting point all as specified and directed.

S&F for HDPE double wall corrugated pipes conforming to IS-14930 Part-II with IP Protection of IP-67 having outer dia 120 mm and inner dia of 103 mm with necessary couplers, bends etc for protection of LT cable all as specified and directed.

S&F for HDPE double wall corrugated pipes conforming to IS-14930 Part-II with IP Protection of IP-67 having outer dia 50 mm and inner dia of 38 mm with necessary couplers, bends etc for protection of LT cable all as specified and directed.

M&L for road cutting for laying of LT UG cable/Galvanised Iron pipe complete and making good all as specified and directed.

S&F GI pipe 50mm bore light grade with all fittings laid in trenches/on wall / on poles etc/ for protection complete all as specified and directed.

M&L Cement Concrete 1:4:8 (40mm graded aggregate) as Lean Concrete in Foundation of Poles, Stay Assembly, etc., including Formwork (as/if required), complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (20mm graded aggregate) as in Coping of Poles, etc. and finishing the Concrete surfaces Fair and Even including necessary Formwork required at Site(s), complete all as specified and as directed.

S&L XLPE, insulated, armoured, heavy duty, electric cable with stranded aluminium conductors, 1100 volts grade, laid in tranches/fixing on wall/poles or passing through pipe, including connecting up with suitable glands, lugs, nuts and bolts wherever required and testing on completion, including taking down existing unserviceable cable with GI protections pipes, complete all as specified and as directed by Engineer-in-Charge of following cross sectional area:- (a) 4 Core x 25 Sq mm

(b) 4 Core x 16 Sq mm

(c) 3.5 Core x 50 Sq mm NOTE :- Excavation, Earthwork, GI Pipe, etc. will be measured and paid under appropriate Items above

Checking the fault in the HT / LT distribution line of any size and length at any location with fault detector machine and determining the fault location including excavation, earth work at any strata as required depth and width and further rectifying it, testing complete all as specified and as directed by Engr- in- charge. Note:- (i) The contractor has to attend the complaint within 02 hrs from the time the complaint being recieved. Electrician employed are to be well known with the site conditions in the vicinity (ii) Fault detector machine, Megger, Digital meter or any other equipment for detecting the fault as required shall be arranged by the contractor (iii) Cable jointing kit, UG cable, MCCBs will be measured and paid seperately under relevant items below (iv) Petty items like insulation Tape, lugs, cotton waste, CTC spray, copper wire, for looping, fuse wire etc and any other item reqd in site are deemed to be inclusive in quoted rate

M&L cable jointing kit straight through 1100 volt grade cable for straight through heat Shinkable type joint complete with jointing material and accessories suitable for XLPE/ PVC armoured aluminium conductor cable of the following sizes complete all as specified. a) Upto 4/ 3.5 core x 35 Sqmm Note for 12.1 to 15 :- Necessary Earthwork, Excavation etc is deemed to be inclusive in above quoted rate.

b) Above 3.5 core x 35 Sqmm and up to 70 Sqmm

c) Above 3.5 core x 70 Sq mm and upto 120 Sqmm

M&L Cable Jointing Kit Straight Through Termination Cold Shrink-able type complete with Jointing Materials with all Accessories suitable for XLPE 11 KV (Earthed), 3 Core, armoured Aluminium Conductor Cable of size 95 Sqmm complete all as specified and as directed.

M&L Cable End Jointing Kit Outdoor Termination Cold Shrinkable type complete with Jointing Materials with all Accessories suitable for XLPE 11 KV (Earthed), 3 Core, armoured Aluminium Conductor Cable of size 95 Sqmm complete all as specified and as directed

M&L Cable End Jointing Kit Indoor Termination Cold Shrinkable type complete with Jointing Materials with all Accessories suitable for XLPE 11 KV (Earthed), 3 Core, armoured Aluminium Conductor Cable of size 95 Sqmm complete all as specified and as directed

S&F new MCCB's in the existing Panel / Distribution Boards with bolts, nuts, lugs & glands etc of the following capacities including dismantling unserviceable burnt out MCCB by disconnecting the cable complete all as specified and directed. (a) MCCB 63 Amps, 4 pole 25 KA, 415 V

(b) MCCB 100 Amps, 4 pole 25 KA, 415 V

(c) MCCB 125 Amps, 4 pole 25 KA, 415 V

(d) MCCB 200 Amps, 4 pole 25 KA, 415 V

Supply & Erecting Steel Tubular Swaged Pole Type 410-SP-31 (9.0 Metre long) including Cast Iron Base Plate, Finial Taper Plug, Cap, Mild Steel Bolts, Nuts, Screws including applying two coats of Black Bituminous Paint Internally and Externally from bottom End of Pole upto PCC Coping and applying with two coats of Aluminium Painting over a coat of Aluminium Primer (Externally from Top of Coping) including writing MES Pole No.with synthetic Enamel Paint (First Grade/quality), complete all as specified and as directed. NOTE : Earthwork, Cement Concrete, etc. will be measured and paid under approprite Items.

M&L for scraping/Preparation of old surfaces and applying aluminium paint, two coat on existing RCC / steel tubular poles of 9 / 11 Mtr long and marking and painting with sky blue and white colours strips with radium paint on intervals of 150mm apart upto a height of 1.5 Mtr from coping level and numbering serial no on the pole such as 'CG LT 10' with letter size not less than 40 mm in height and 6 mm in width with synthetic paint all as specified and directed

Supply, installation, testing and commissioning integral LED Aviation Light comprising aluminum Housing with polycarbonate enclosure including all necessary drilling, bolting or riveting etc complete all as specified and directed Make : Bajaj, Phillips, Havells, Wipro

Supply and fix rigid non-metallic PVC conduit of 20mm external dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. inlcuding taking down existing unserviceable PVC conduit of any description complete all as specified and directed

Supply and fix FRP junction box of size 250 x 200 x 105 mm for loop in - loop out connections of street lights including one four pole connector and one MCB 240 V SP 6 A mounted on existing street light poles complete all as specified and directed

M & L for PVC flexible cable with copper conductor 2.5 sqmm, 2 core, 1100 volts grade multistranded for connecting from existing junction box to street light fitting complete all as specified and directed

S&F light emitting diode street light Luminaries compressing pressure, die cast housing for better aesthetics and thermal management. Comprises of extruded aluminium housing with pre-wired gear tray with LED’s & drive, heat resistant flat glass suitable gasketed for IP65 protection, high grade power coating and fitted with toughened glass with high power LED’s of 60 watt and pipe mounting arrangement for end mounting on bracket made out of 40mm dia GI pipe light grade, 1.2m long bent to shape with two sets of clamps made out of flat iron 50 x 6mm, bolts, nuts and washers and applying two coats of aluminium paint over on coat of red oxide zinc chrome primer connecting electrically with PVC mulitistranded copper cable of suitable size complete including taking down existing fittings all as specified and directed Make: Bajaj, Wipro, Havells, Phillips

S & F 30 Watt light emitting diode post top lantern, extruded aluminium housing with toughened glass cover Ingress protection IP 65, Driver is integral to the housing pipe mounting arrangement for end mounting on bracket made out of 50mm dia GI pipe, , connecting electrically with PVC multistranded copper cable of suitable size complete including taking down existing post top fittings all as specified and directed. Make: Bajaj, Wipro, Havells, Phillips

S&F in repairs factory made street light control panel, with and including all accessories such as control switch, contactor, automatic control relay, pre-wired etc. fixed on fabricated angle iron channel of suitable size and grouting on floor, Timelite-40 Amps, 3 Pole 230/415 volts-Astronomical Time switch (suitable for Pune area), Make -Indo-Asian Cat No.TLO65ASO or equivalent in Havells, Stranded, Legrand.

Material and labour for earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground (earth pil not less than 2.25m deep below the normal ground level) with top edge of the plate not less than 1.5m below normal ground level connected to GI earth strip of size 25x4mm as a earthing lead by means of GI bolts , nuts check nuts and washers and earth lead protected by 40mm dia GI pipe medium grade and connected to electric motor/panel board/earthing test point all as shown on electrical plate No 3 of SSR Part I and all a specified including testing on completion and dismantling of existing earthing Note :- The unit rate shall include for excavation earth work in any type of soil, plain cement concrete 1:3:6 mix, Type C-1 pit, 40mm thick RCC 1:2:4 mix type B cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways, GI funnel with preamble (Notes) under sub heading earthing specified in SSR Part II

M&L for preparation of old painted surfaces of transformer with coarse cloth/ brush and painting throughout externally on exposed surfaces spraying with two coats of smoke grey colour synthetic enamel paint including writing of transformer details on plinth in white enamel paint on black enamel paint back ground complete including one coat of white wash for base foundation all as specified and directed by Engr-in-charge

Supply and spread 40 mm graded coarse aggregate around out door transformer and HT 11KV/4 Pole structure all as directed all as directed and specified by Engineer-in-charge

NOTE : An Amount of Rs 31,605.00 towards Schedule of Credit shall be deducted to arrive the Contract Sum

USR Transport

M/S Sudhir Kumar Gupta

ICON AGENCIES

NAVJEEVAN ENTERPRISES