Colouring with Repair of toilet and Renovation of DDH office, Ganjam in Ganjam District

Dismantling and removing doors,windows and ventilators including removal of frame,hinges,fastening and stacking the same for removing the debris within 50m lead

Dismantling brick or stone masonry in cement mortar under 3.0m height including stacking the useful materials

Scraping old paint with scrapers, sand papering andwashing with soap water or soda including scaffolding charges upto 5M height per sqm

A. Ground Floor

B. First Floor

Providing fitting, fixing of Al. door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 6mm plain glass in top portion with 12mm thick pre-laminated board in bottom portion fixed on door frame by means of tapered clip No.4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc.complete.

Providing, fitting and fixing of GYPSUM board ceilling with Aluminium anodised T section No.- 3215 with 2' 0'' centre to centre. L section No.-1705 upto 15 micron on 4 walls to be be fixed by means steel screwes and PVC suspended from ceilling etc. complete in First Floor.

Brick work with Fly Ash Bricks 25 cm x 12cm x 8cm size having crushing strength not less than 75 kg/sq.cm with dimensional tolerance ± 8 percent in cement mortar 1:6 in superstructure in First Floor.

2.5cm.grading concrete (1:2:2) on roof slab using 6mm.size CBHG chips on new work

16mm thick cement plaster in C.M(1:6) over brick work inside in First Floor.

12mm thick cement plaster in C.M(1:6)over brick work out side Plaster in First Floor.

Finishing wall surface of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging chargeswith cost of all materials taxes, labour T&P etc complete.

A. Ground Floor

B. First Floor

Priming 1 coat with any approved Primer

A. Ground Floor

B. First Floor

Finishing walls with Plastic Emulsion paint of approved shade on new work to give even shade 2 coats inside

A. Ground Floor

B. First Floor

Finishing walls with Weather coat paint of approved shade on new work to give even shade 2 coats inside

A. Ground Floor

B. First Floor

Fitting vitrified tiles in floors,treads or steps and landing on 25mm thick bed of cement mortar(1:1) joined with neat cement slurry mixed with pig ments including cost of tiles

A. Ground Floor

B. First Floor

Fitting vitrified tiles in dadoes skirting and riser of steps on 12mm thick cement plaster(1:3) joined with neat cement slurry mixed with pigments to match the shade of tiles including rubbing &polishing complete including cost of tiles

A. Ground Floor

B. First Floor

Fitting Ceramic glazed tiles on floors,treads or steps and landing on 25mm thick bed of cement mortar(1:1) joined with neat cement slurry mixed with pig ments including cost of tiles

A. Ground Floor

B. First Floor

Fitting Ceramic glazed tiles in dadoes skirting and riser of steps on 12mm thick cement plaster(1:3) joined with neat cement slurry mixed with pigments to match the shade of tiles including rubbing &polishing complete including cost of tiles

A. Ground Floor

B. First Floor

Fitting Chequred tiles on floors,treads or steps and landing on 25mm thick bed of cement mortar(1:1) joined with neat cement slurry mixed with pig ments including cost of tiles in Ground Floor.

Fitting Chequred tiles in dadoes skirting and riser of steps on 12mm thick cement plaster(1:3) joined with neat cement slurry mixed with pigments to match the shade of tiles including rubbing &polishing complete including cost of tiles in Ground Floor

Supplying and fixing of Roller blinds by fixing powder coated top channel, bottom channel with bottom end cap, control unit and good quality of 0.60 mm thick fabric of approved design and quality etc. complete.

Supplying, fitting, fixing up UPVC window (sliding type)

Supplying, fitting, fixing up UPVC door.

P.H. Works

Supplaying all materals,labours, taxes and tools and plants for fittings and fixing of PVC pipes,class- confirming to ASTM-D-1785/89(Sch-80) and pipe fittings of the following nominal bore with clamps fittings including making good the wall,ceilling and floor,testing all complite as per specification and direction of the Engineer -in-charge.

15 mm dia PVC Pipe

20 mm dia PVC Pipe

25 mm dia PVC Pipe

32 mm dia PVC Pipe

Supplaying all materals,labours, taxes and tools and plants for fittings and fixing of CPVC pipes, confirming to IS:15778 having thermal stability for hot &cold water supplay,including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m specing, with jointing the pipes with CPVC solvent cement and testing the joints complete as per specification and direction of the Engineer -in-charge.

25 mm dia CPVC Pipe

Cutting grooves in pucca floors and walls for taking CPVC pipe s and making good the damages as per specification and direction of the Engineer -in-charge.

Cutting holes through existing brick work for taking CPVC pipe s and making good the damageswith cement morter (1:6) as per specification and direction of the Engineer -in-charge.

Cutting holes through existing in R.C.C. Floors and roofs upto 19 cm. for taking CPVC pipe s and making good the damageswith cement voncrete (1:2:4) as per specification and direction of the Engineer -in-charge.

Supplying all materals,labours, taxes and tools and plants for fittings and fixing of brass screw-down Bib cock(Tapes)/CPittings of the following ISI approved make including supplay all nessary jointining material compliteas per specification and direction of the Engineer -in-charge.

15 mm dia CP Brass Short Body Bib cock .

15 mm dia CP Brass long body Bib cock .

15 mm dia CP angle stop cock

15 mm dia CP flanges

125 mm dia CP grating

Supplying all materals,labours, taxes and tools and plants for fittings and fixing of brass screw-down Stop cock / CPittings of the following IS:781-1995 approved make including supplay all nessary jointining material compliteas per specification and direction of the Engineer -in-charge.

15 mm dia CP Brass Stop Cock

15 mm dia CP Pillar Cock

Supplying, fitting, fixing of 15 mm dia CP concealed stopcock etc. Complete.

Supplying all materials,labour,T&P and fitting, fixining following PVC items and filling of the following outside diameter conformoring to IS 13592 Type A, to walls with seal ring conforming to IS:5382,leaving 10 mm gap for 10mm thermal expansion,(1) single socket pipes as per manufactures specification testing, all complite as per specification and directionof the Engineer incharge.

110 mm dia UPVC pipe (4 kgf/cm 2 )

110 mm dia UPVC door Tee

110 mm dia UPVC door bend

110 mm dia UPVC plain Tee

110 mm dia UPVC plain bend

110 mm dia UPVC Cowl

Supplying all materials,labour,T&P and fitting, fixining ,laying in trenches High Density Polythine pipes conforming to IS-4984-1995 and specials of the following outside diameter conformoring to Class 1 to Class 3 and jointing by fusion welding method including testing as per manufactures specification testing, all complite as per specification and directionof the Engineer incharge (Earth work in trenches measured separetly).

110 mm dia H.D.Pvc Pipe

Supplying all materials,labour,T&P and fitting, fixining of white glazed vitreous china sqatting pan of size 580 mm x 440 mm size duly embedded in cement concrete (1:4:8) using hard granite metal 4 cm. nominal size and cement mortar (1:1),cutting the floor and mending good the damages etc,all complite as per specification and direction of the Engineer inchargr.

580 mm x 440 size White glazed Virtious Odisha pattern squating pan Pan (Parry wire/Hindu stan make)

Supplying all materials,labour,T&P and fitting, fixining of Wash down water Closest (Europian type W.C pan)Parryware make with Integral"S" or "P" trap conforming to IS 2556:Part 8-2004, to the floor with Wooden Plug And Chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc,,all complite as per specification and direction of the Engineer inchargr.(Without Seat &Cover)

White Vitreous China EWC Pattern with "P" Trap

Supplying all materials,labour T &P Fitting of 10 liters capacity PVC L L flushing Cistern with manually controlled device(handle lever) conforming to IS :7231,etc all complite as per specification and direction of the Engineer incharge. .

10 Liters P.V.C.low level Flushing Cystern

Supplying all materials,labour T &P Fitting of Plastic Seat and cover for wash down water closet with cromium plated brass hinges and rubber buffer etc all complite as per specification and direction of the Engineer incharge. .

White Plastic Seat &cover with CP Brass Hinges

Supplying all materils,labour, T&P fitting,fixing of Long Bowl Pattern Urina(Parryware make)l conforming to IS 2556: Part 6-1996 including connectiont the Urinalof Angle back 450x375x350 mm sizes respectvely with waste pipe by means of white cement(lead) mixed with chopped hemp etc ,as per specification and direction of the Engineer -in-charge

Virtious China -Angle Back Urinal of 450mm x 375 mmx 350 (Parryware/Hindustan)

Supplying all Materials,labour, T&P fitting,fixing of Porcelain Counter Top Basin Oval Shape (450x400) with hole for pillar taps conformoing to IS 2556 : Part 4-2004 with cast iron or M.S Brackets painted white cement including cutting holes in walls and making good the damages etc. All compiled as per specificationand direction of the Engineer-in-charge.

Porcelain Counter Top Basin Oval Shape (450x400)Parryware make

Supplying all materils,labour, T & P fitting,fixing of PVC waste pipe for wash basin or sink i.e Flexiable (Coil shaped) PVC Waste pipe 40mm dia with length not less than 700 mm with PVC waste fittings etc. All complite as per specificationand direction of the Engineer-in-charge.

Flexible (coil shaped) PVC waste pipe for sink & wash basin 32 mm dia with 900 mm long waste fittings

Supplying all materils,labour, T&P fitting,fixing of CP brass towel rail wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge.

25 mm dia x 600 mm long.

Supplying all materils,labour, T&P fitting,fixing of bevelled type plate glass mirror with wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge.

600 mm x 450mm

Supplying all materils,labour, T&P fitting,fixing of Cp soap Holder standard sizewith wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge.

Supplying all materils,labour, T&P fitting,fixing of CP brass towel ring wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge.

CP Brass Towel Ring

Supplaying all materals,labours, taxes and tools and plants for fittings and fixing of CP Brass Shower rose with CP revolving Shower bend type(Parryware make) with 15 to 20 mm inlet & 150 mm dia etc compliteas per specification and direction of the Engineer -in-charge.

Supplying all materials,labour and fixing of Brass Full Way Valve conforming to IS: 781-1995 of the 32 mm Full way Valves including all taxes etc complite as per direction by Engineer in charge.

Supplying all materials,labour and fixing of Brass Full Way Valve conforming to IS: 781-1995 of the 25 mm dia brass ball Valve including all taxes etc complite as per direction by Engineer in charge.

Please Enable Macros to View BoQ information