REPAIRS/MAINT AND PAINTING TO STEEL FURNITURE UNDER GE BRICHGUNJ, MILITARY STATION ,PORT BLAIR

Amount

ALMIRAH STEEL LARGE WITH SHELF (FD-1031, FD-67,FD-339 &351)

Taking down/out old unserviceable handle and Supply and fixing new chromium plate handle 100 mm long complete all as specified and as shown on drg .

Taking down/out old unserviceable lock and Supply and fixing new 6 lever of brass lock godrej pattern complete all as specified and as shown on drg .Make of Lock - Lico/RIna/Hettich

Taking down old shelves MS clamp incl removal of denting for the deshaped portion, welding etc as required and refixing in the same position complete all as specified and as shown on drg .

Taking down/out old lock cover and Supply and fixing new lock cover made of 16 gauge 1mm MS sheet complete all as specified and as shown on drg . Make of MS Sheet -Tata/Surya/Jindal/Prakash,

Repair to door as specification including replacement of hings all as shown on drawing and as directed by Engr-in-charge.

Taking down /out old worn out legs and Supply and fixing of legs made of 18 gauge of MS sheet complete all as specified and as shown on drg .Make of MS Sheet - Tata/Surya/Jindal/Prakash,

Taking down/out old unserviceable shelves and Supply and fixing new shelves made of MS plain sheet 1mm thick complete all as specified and as shown on drg .Make of MS Sheet -Tata/Surya/Jindal/Prakash,

Removal of denting for the deshaped portion of almirah large steel , cleaning of rusted surfaces with & including parts/ item repaired/replaced under item No 1 .03 to 1 .06 above including preparation of patches by applying putty etc and applying two coats of paint AD grey/Olive green/off white synthetic enamel paint on the internal and external surfaces by spray gun over a coat of red oxide primer complete all as specified and as shown on drg.Make of Paint - Asian/Burger/Nerocle

ALMIRAH STEEL MEDIUM WITH SHELF (FD-1032 , 243 & FD-350)

All as per items No 1.01 above but Almirah steel medium

All as per items No 1.02 above but Almirah steel medium

All as per items No 1.03 above but Almirah steel medium

All as per items No 1.04 above but Almirah steel medium

All as per items No 1.05 above but Almirah steel medium

All as per items No 1.06 above but Almirah steel medium

All as per items No 1.07 above but Almirah steel medium

All as per items No 1.08 above but Almirah steel medium

LOCKER BED SIDE STEEL : (FD-257/1029)

Taking down old unserviceable conduit pipe and Supply and fixing new conduit pipe 20mm dia of shape and size complete all as specified and as shown on drg .

All as per items No 1.01 above but Locker bed side steel

All as per items No 1.02 above but Locker bed side steel

Taking down old unserviceable hasp & staple and Supply and fixing new MS hasp and staple ,100mm size complete all as specified and as shown on drg .

All as per items No 1.05 above but Locker bed side steel

All as per items No 1.08 above but Locker bed side steel

TABLE OFFICE OFFER'S STEEL/TABLE OFFICE CLK STEEL (FD-1003 & FD-1004)

Taking out old unserviceable top and supply and fixing new top of size 1370x760 made of 18/19 thick rubber wood best quality duly covered with 6mm thick rubber wood beading all around top duly french polished with the reqd gloss steel screw to frame of complete all as specified and as shown on drgs.Make of Board - Century/greenply/Action Tessa

All as per srl item 4.01 above but of size 1680x870mm.

Taking out old unserviceable lock and supply and fixing new brass lock 6 lever, Godrej pattern, after removing the dents of drawers and cup board to make it functional complete all as specified and as shown on drgs.Make of Lock - Lico/RIna/Hettich/Link

Taking out old unserviceable leg and supply and fixing new leg made of 1.5mm thick MS square pipe with size & shape as exists complete all as specified and as shown on drgs.Make of MS pipe - Tata/Surya/Jindal/Prakash,

Taking out old unserviceable leg and supply and fixing new leg made of 1.5mm thick MS square pipe with size & shape as exists complete all as specified and as shown on drgs.Make of MS pipe - Tata/Surya/Jindal/Prakash,

All as per srl item No 4.05 above but side stiffner

Taking down/out old U/S drawer and Supply and fixing new drawer made of 16 gauge 1mm MS sheet with including steelness steel channle complete all as specified and as shown on drg . Make of MS Sheet - Tata/Surya/Jindal/Prakash,

Removal of denting of deshaped portion, de-rusting, cleaning of rusted surfaces including preparation of patches with & including to the parts/items repaired/replaced under item No.4.04 to 4.07 above by applying putty etc and applying two coats of synthetic enamel paint over a coat of red oxide, AD grey/Olive green by spray gun complete all as spceified and as shown on drg.Make of Paint - Asian/Nerocale/Burger

Taking down old unserviceable hard rubber shoe and supply and fixing new hard rubber shoe inside of leg with size & shape as exists complete all as specified and as shown on drgs.

BED HARD Ors (FD/MAP-II/01)

Taking down U/S ply top and S/F new ply top made of 12 mm thick comercial BWR ply Make Green ply/century/Kit ply all as shown on Drg.

Taking out U/S rubber shoe and S/F new hard rubber shoe size and shape exists all as shown on drg.

Preparation of surface with sand paper after scrubbing and applying two coats of brown/black/off white/gray colour synthetic enamal paint over a coat of red oxide primer on steel surface of bed hard to match by spray gun paint with the existing complete all as specificed and as shown on drgs.Make of Paint - Asian/Nerocale/Burger

CHAIR STEEL TUBULAR WITH ARMS AND W/O ARMS (FD-75M & TP)

M&L welding (Gas/Elect) in repair of tubular leg, with fine finishing and standard workman ship and duly painted with two coat of Olive Green paint over a coat of red oxide primer all as specified and directed by Engineer-in- Charge.

Taking out U/S seat stiffner and S&F new seat stiffner made of 25x6 mm flat iron and 450 to 500mm long including required two holes for screw before 40mm at each end compelete all as specified on drawing as directed by Engineer-in-Charge .

Taking out U/S stiffener and S&F new stiffiner of mild steel round bars 10mm dia and 450 mm long welded between the legs withfine finishing and standard workman ship and duly painted with two coat of Olive Green paint over a coat of red oxide primer all as specified and directed by Engineer-in- Charge.

Same as item No 6.03 but 500 mm long .

Taking out U/S seat and back fram chair CB steel and S&F new seat and back fram made of shisham wood well seasoned free from knots and cracks with permissible moisture contents as per shape and size duly black polished up to required finish. Weaving shall be done with platic cane not less than 0.35mm thick as shown on drg.

Taking down u/s plastic cap from tubular pipe and S&F new plastic cap of approved quality .

Taking down old unserviceable arms rest and S&F new arm rest made of teak wood duly black polish compelte all as directed by Engr -in-charge.

CHAIR WRITING OFFRS (FD/E6/MAP/12)

Taking out U/S arms and S/F new arm rest made of black internal with shin of chair writing with size and shape exists complete all as specified as shown on drg.

Taking down old us hard rubber shoes and S&F new Hard rubber shoes compelete all as specified and shown on drg.

Taking out unservicable cloth and cushion from seat chair writing map and supply and fixing new cushion made out of 50mm thick foam of 40mm density including cutting and stiching finally covering the entire foam with tapersty cloth shade and colour complete all as directed by Engr-in -charge. (Colour of tapestry colth approvd by BSO/GE)

Taking out unservicable cloth and cushion from back chair writing map and supply and fixing new cushion made out of 50mm thick foam of 40mm density including cutting and stiching finally covering the entire foam with tapersty cloth shade and colour complete all as directed by Engr-in -charge. (Colour of tapestry colth approvd by BSO/GE) NOTE - (i) Quoted rate is including for two coats of painting with enamel black paint with frame structure. (ii) Tapesty cloth used shall not be less than Rs. 500.00 per meter.

CHAIR VERANDAH (FD-259, 333 & 256)

M&L for cutting U/S cane and welding (Gas /Elect) of frame, 10 mm round bar , legs where as required to make its actual shape and size all as directed by Engineer-in-Charge.

Taking out old U/S rusted legs of chair varandah and S&F new legs made of Conduit pipe 19mm dia 1.6mm thick and 1.35 Mtr duly painted with two coat of enamel paint (white ) over a coat of red oxide primer all as specified and directed by Engr-in-Charge.

M&L cutting and removing U/S cane and preparation of old steel surfaces with sand paper and painting with two coat of synthetic enamel paint (White) Make : Berger/Asian/Shalimar.

Taking out old U/S rubber shoe and S&F new hard rubber shoe of 20 mm dia all as spcified and shown on drg.

Cutting/taking out old unserviceable cane from chair varandah and supplying recanning of chair with white plastic cane 4 mm wide canning as per the Godrej pattern complete all as specified and as shown on drg. make of cane/ :- Shah/Premier brand

TABLE COMPUTER

Taking out U/S top and S/F new top made of 18 mm thick pre lamnated particel board extior grade both side same colour with including pvc beading all around of top all as specified and as shown on drg.

Taking out U/S drawer and S/F new drawer made of 18 mm thick pre lamnated particel board extiror grade both side same colour with including steelness steel channle and all around pvc beading duly completed and all as specified and as shown on drg.

Taking out U/S Key board and S/F Key board tray (450 x 480) made of 18 mm thick pre lamnated particel board extiror grade with pvc beading of around with including steelness steel channel duly completed and all as specified and as shown on drg.

Taking out U/S bottom shelf and S/F bottom shelf made of 18 mm thick pre lamnated particel board extiror grade with oval pvc beading duly completed and all as specified and as shown on drg.

Taking out U/S vertical board and S/F vertical board made of 18 mm thick pre lamnated particel board extiror grade with oval pvc beading duly completed and all as specified and as shown on drg.

Taking out U/S Mouse tray and S/F mouse tray made of 18 mm thick pre lamnated particel board extiror grade with oval pvc beading of around with including steelness steel channel duly completed and all as specified and as shown on drg.

CHAIR COMPUTER (FD/E6/MAP/01)

Taking out U/S up and down lever and S/F new adustable lever with size and shape exists complete all as specified as shown on drg.

Taking out U/S coaster wheel and S/F coaster wheel of twin of computer chair with size and shape exists complete all as specified as shown on drg.

Taking out U/S hand rest and S/F new hand rest of twin of revolving chair with size and shape exists complete all as specified as shown on drg.

All as per srl item No 7.03 above but chair computer

All as per srl item No 7.04 above but chair computer NOTE - (i) Tapesty cloth used shall not be less than Rs. 250.00 per meter.

BED HARD STEEL OFFRs (FD/E6/MAP/08 (R))

Taking down U/S ply top and S/F ply top made of 12 mm thick commercial BWR ply with fixing suitable nut and bolts all as shown on drg. Make of ply - Green ply/century/Kit ply

Taknig out U/S head board and S/F new head board made of 18 mm thick pre laminated MDF board booth side teak colour with fixed screwd size and shape exists all as shown on drg.Make of Board - Century/greenply/Action Tessa

Takni out U/S foot board and S/F new foot board made of 18 mm thick pre laminated MDF board both side teak colour with fixed screwd size and shape exists all as shown on drg. Make of Board - Century/greenply/Action Tessa

Takni out U/S rubber shoe and S/F new rubber shoe size and shape exists all as shown on drg.

Preparation of surface with sand paper after scrubbing and applying two coats of brown/black/off white/gray colour synthetic enamal paint over a coat of red oxide primer on steel surface of bed hard to match by spray gun paint with the existing complete all as specificed and as shown on drgs. Make of Paint - Asian/Nerocale/Burger

TABLE BED SIDE (FD/E6/MAP/15(R))

Taking out U/S top and S/F Top made of 18 mm thick pre lamnated MDF board side teak colour with alround pvc beading of table Top with all as specified and as shown on drg.

Taking out U/S drawer and S/F drawer made of 18 mm thick pre lamnated MDF board both side teak colour with including steelness steel channle and all as specified and as shown on drg.

Taking out U/S legs and S/F legs of size and shape exists all as complete shown on Drg.

Taking out U/S shutter and S/F shutter made of 18 mm thick pre lamnated MDF board both side teak colour with alround pvc beading of shutter and all as specified and as shown on drg.

Taking down U/S handle and S/F new handle stellness steel shape exists all as complete as specified as showm on Drg.

Takni out U/S rubber shoe and SF rubber shoe size and shape exists all as shown on drg.

TEAPOY VARANDAH (MAP) (FD/E6/MAP/17)

Taking out U/S top and S/F top made of 18 mm thick pre laminated MDF board both side teak colour with PVC all around PVC beading of top, size and shape as exists and all as complete as shown on drg.

Preparation of surface and two coat of enamal black paint over a coat of red oxide primer complete all as secified and shown on drg.

Takni out U/S rubber shoe and S/F new hard rubber shoe size and shape exists all as shown on drg.

CHAIR DINING Offrs ( FD/E6/MAP/10)

Opening of joints and removing of old front leg and S&F new front leg (left/right) made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size duly french polished new and old surface of chair all as specified in drawing.

Same as item No 14.01 but rear legs

Same as item No 14.01 but stiffener

Same as item No 14.01 but side rail

Same as item No 14.01 but back support

Provision of Konia (wooden Bracket) of size 3"x3" seasoned teak wood 1" thick in between leg and side rail of the chair fixed with screw to provide more strength.

Taking out unservicable seat of chair dining and supply and fixing new cushion made out of 75mm thick foam, 40mm density covering with leather black/brown colour including 12mm thick plywood bottom side cutting and stiching finally shade and colour complete all as directed by Engr-in -charge. (Colour of leather approvd by BSO/GE)

Preparation of surface with glinder and sand paper after scrubbing and French polishing to chair dining and including to the parts repaired/replaced under item No 14.01 to 14.05, to the required gloss to match with the existing complete all as specified and as shown on drg.

CHAIR VERANDAH (FD/MAP-II/06)

M&L welding (Gas/Elect) in repair of leg, and stiffiner with fine finishing and and standard workman ship and duly painted with two coat of white paint over a coat of red oxide primer all as specified and directed by Engineer-in- Charge.

Provn of stiffiner for the chair varandah of center seat of chair varandah made of conduit pipe 19mm dia, 1.6mm thick and 35mm long welded of center both side seat and back of chair varadah all as specified and directed by Engr-in-Charge.

Taking out U/S PVC seat and back fram chair Varandha and S&F new PVC seat and back of Chair varandha as per shape and size as per drg. Make of PVC - Cello/Amco/Supreme

Preparation of steel surface with & including parts/ items repaired/replaced under item No 15.01to 15.02 above and applying two coats of synthetic enamel white paint over a coat of red oxide primer complete all as specified and as shown on drgs.Make of Paint - Asian/Nerocale/Burger

Taking out old U/S rubber shoe and S&F new hard rubber shoe of 20 mm dia all as spcified and shown on drg.

CHAIR DINING JCOs (MAP) (FD/E6/MAP/04)

Opening of joints and removing of old front leg and S&F new front leg (left/right) made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size duly french polished new and old surface of chair all as specified in drawing.

Same as item No 14.01 but rear legs

Same as item No 14.01 but stiffener

Same as item No 14.01 but side rail

Same as item No 14.01 but back support

Provn of stiffiner (teak wood ) of size 25mm x25mm and 35 mm long seasoned teak wood between side rail of the chair fixed with screw to provide more strenghth. of chair seat .

Provision of Konia (wooden Bracket) of size 3"x3" seasoned teak wood 1" thick in between leg and side rail of the chair fixed with screw to provide more strength.

Taking out unservicable PVC seat of chair dining and supply and fixing new PVC seat 5mm thick white/cream colour fix of chair bottom all as directed by Engr-in -charge.

Preparation of surface with glinderand sand paper after scrubbing and French polishing to chair dining and including to the parts repaired/replaced under item No 14.01 to 14.05, to the required gloss to match with the existing complete all as specified and as shown on drg.

TABLE DINING Ors (FD-165)

Taking out old unserviceable top and supply and fixing new top made of 19 thick plywood BWR duly cover with 22mm gauge aluminium sheet of alround of top with fixed steel screw to frame of complete all as specified and as shown on drgs.Make of ply- Century/greenply/Action Tessa

M&L welding (Gas/Elect) in repair of leg, and stiffiner with fine finishing and and standard workman ship and duly painted with two coat of black paint over a coat of red oxide primer all as specified and directed.

Preparation of surface and two coat of enamal black paint over a coat of red oxide primer complete all as secified and shown on drg.

Takni out U/S rubber shoe and S/F new hard rubber shoe size and shape exists all as shown on drg.

TABLE CENTRE GLASS TOP (FD-375)

Supply and fixing in repair of Glass top of size 1200x600x8mm duly mitired all around including removing of old glass all as specified as dryg all as directed. Make of Glass - Modi Guard / Atul / Saint Globin

Taking out U/S rubber shoe and S/F new hard rubber shoe size and shape exists all as shown on drg.

CHARPOY GI PLYTOP (FD-220)

Removing of unservicable charpoy top and S&F of plywood 12mm thick BWR grade ISI marks of size 1980x900mm with nut and bolts fix 75mm long, all as per direction.

Nos of 3 flat iron stiffiner of size 900x25x5mm thickness including welding and fixing . The siffiner shall be painted with two coats of black enamal paint. Make of paint- Asian/Burger/Shalimer

Long rail made of 32mm dia of GI pipe of length 1980mm medium grade ISI marked duly threading both side ends. Make of pipe- Bansal/Jindal/Tata

Short rail of length 900mm made out of long rail obtained from Sr no 17.03 above duly cutting and threading of both ends.

Leg of length 440mm made out of long rail /short rail obtained from sr no 17.03 and 17.04 above duly cutting and threading one ends and bottom ends fixing of iron plat.

Taking out old unserviceable check nut and supply and fixing new check nuts all as specified and as shown on drgs.

Taking out old unserviceable elbow and supply and fixing new GI elbow 3 way 32mm ISI marks all as specified and as shown on drgs.

Removal of exdisting worn out painting with acid from inside & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint smoke grey/Olive green/White. Make :- Asian/Berger/Shalimar over a coat of red oxide primer, rest allas shown on drg and as directed.

(a) Alimirah steel large with Shelves (FD-351)

(b) Almirah steel medium with shelves (FD-350)

(c) Locker Bed side steel (FD-257, FD-1029, CE/SK/619)

(d) Book Case Steel (FD-1028)

(e) Rack steel adjustable three tiers (711 x 655 x 254 mm) (FD-106 (M)

M/s Susanta Enterprises

SARKAR WOOD FURNITURE SHOP