Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹44.9 L
EMD Value
₹89,720
Closing Date
27 May 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Accessories Division, Lucknow
HINDUSTAN AERONAUTICS LIMITED Accessories Division, Lucknow Post Office, Lucknow - 226 016 Uttar Pradesh, India
Civil and allied works for renovation Wheel and Break section at Mechanical Factory
7370
HAL-AD/9904/4571/CE/2024
Works
Accessories Complex - Lucknow Divn - Works - Civil
₹0
₹89,720
27 May 2024
7 May 2024
7 May 2024
27 May 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership Pvt. Ltd./ Proprietorship/Partnership/ Public limited/ Govt. Agencies/ Trust
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
Contact details
Intending parties having credentials as mentioned below may participate in e-tendering. The pre-qualification requirements for the works are as under :-
List of similar works executed in the past 7 years with value, schedule period of completion reasons for delay in completion if any and salient features of works, with documentary evidence of satisfactory completion.
PAN No.:
Constitution and legal status i.e. Proof of proprietary/Partnership firm or company & authorised person for receiving or signing the documents to be submitted.
Goods and Service Tax ID No.
SAC (Service Accounting code) along with the tax structure.
Bank account details such as account no., name of account holder, name and address of the bank, IFSC code duly certified by the bank along with cancelled cheque as a document of proof shall be attached.
Registered Contractor
Average annual financial turn over during the last 3 years, ending 31st March 2022 of the previous financial year [ should not be less than 30% of Amount put to tender]
EMD of Rs.89720.00
Latest Solvency Certificate issued from Nationalized/ scheduled Bank issued and NOT before 12 months from the last date of Tender submission
Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded]
(i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost.
(ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost.
(iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
Details of person holding the power of Attorney (If different from contact person)
DECLARATION I
DECLARATION II
DECLARATION III
Description of Items
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. of any description, removing glass panes and wood particle boards from aluminium frame work and then unscrewing joints etc. of frame work, stacking all materials at site and depositing to stores, all complete as directed by E.I.C.
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. etc all com plete as required and directed by EIC.
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead Of area 3 sq. metres and below etc all complete as required and directed by EIC.
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead Of area 3 sq. metres and above etc all complete as required and directed by EIC.
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead etc all complete as required and directed by EIC.
Providing and laying Brick work using well burnt locally available bricks with common burnt clay class designation 7.5 upto plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) for substructure and super structure ,cable trenches etc .,including cost of all labours, materials, scaffolding, curing, racking out of joints,T&P etc. all complete at all height as per specification, drawing and as directed by Engineer in charge.
Providing and laying brick work half brick thick walls in cement mortar 1:4 ( 1 cement : 4 Coarse sand) with bricks of sub Class ‘A’ with minimum average crushing strength 75 kg/ cm² using well burnt locally available bricks , laid straight or curved on plan not exceeding 6.0M. Mean radius including placing of reinforcement at every fourth layer etc. including cost of all labours, materials, scaffolding, curing, racking of the jointsT&P etc complete at all heights as per specification, drawing and as directed by Engineer in charge.
Providing and Plastering 12 mm thick on internal brick wall/ concrete surfaces in cement mortar 1:6 ( 1 cement : 6 Coarse sand ) including finishing to an even and smooth surface without using extra cement including cost of all labours, materials, scaffolding and curing and T&P etc. all complete at all height as per specification, drawing and as directed by Engineer in charge.
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall withaluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.
Providing & Fixing horizontal level suspended ceiling comprising of Knauf GI Microlook Lay-in Plain metal ceiling consisting of 600x600mm (Nominal Size) Lay-in tiles of 120 gsm galvanized steel as per IS 277 (2003) suitable for architectural finishes in 0.5 mm thickness as per IS:513 (1994) in Global white color with Square Tegular/Microlook 90˚ edge having 8mm drop and 5.5mm flange. The difference between the 2 diagonal dimensions of the tile to be less than 1mm. Tiles shall be flattened by precision leveller to minimize sag to less than 1/400mm. The tile shall be electrostatically polyester powder coated using RoHS compliant powder having coating thickness ranging from 60-80 microns. The powder coating shall pass Salt Spray Test for 750 Hours as per ASTM B117, QUV –A Test for 1000 hours as per ASTM G-154 – (Cycle – 1) and Humidity test for 1000 hours as per DIN 50017. The powder coating shall have an adhesion of GT0 as per EN ISO 2409. The shade variation across batches shall be delta E<1 using Excite/BYK Gardner instrument and gloss level 25±5% at 60˚ as per ASTM D523. The tile shall have a Light Reflectance of ≥ 63% in accordance with ASTM 147798 and Fire Performance of Class 0/1 as per BS 476 Part 6 & 7 in module size of 600x600mm. All border cut tiles shall be laid, using Knauf lay-in end cap for installation to have a Microlook effect on perimeters.
Providing & Fixing horizontal level suspended ceiling comprising of Knauf GI Microlook Lay-in Standard Perforated metal ceiling consisting of 600x600mm (Nominal Size) Lay-in tiles of 120 gsm galvanized steel as per IS 277 (2003) suitable for architectural finishes in 0.5 mm thickness as per IS:513 (1994) in Global white color with Square Tegular/Microlook 90˚ edge having 8mm drop and 5.5mm flange. Tile shall have perforation having hole diameter 2.5mm and open area 16% with linear and diagonal pitch of 5.5mm and 7.7mm respectively and a border of 10mm. The difference between the 2 diagonal dimensions of the tile to be less than 1mm. Tiles shall be flattened by precision leveller to minimize sag to less than 1/400mm. The tile shall be electrostatically polyester powder coated using RoHS compliant powder having coating thickness ranging from 60-80 microns. The powder coating shall pass Salt Spray Test for 750 Hours as per ASTM B117, QUV –A Test for 1000 hours as per ASTM G-154 – (Cycle – 1) and Humidity test for 1000 hours as per DIN 50017. The powder coating shall have an adhesion of GT0 as per EN ISO 2409. The shade variation across batches shall be delta E<1 using Excite/BYK Gardner instrument and gloss level 25±5% at 60˚ as per ASTM D523. The tile shall have a Light Reflectance of ≥ 63% in accordance with ASTM 1477-98. Back side of the tile will have Soundtex fleece hot pressed mechanically for uniform bonding to achieve NRC up to 0.7 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C-423 and Fire Performance of Class 0/1 as per BS 476 Part 6 & 7 in module size of 600x600mm. All border cut tiles shall be laid, using Knauf lay-in end cap for installation to have a Microlook effect on perimeters.
Providing and laying 02 mm thick heavy duty homogeneous n, heavy duty, industrial use and flexible Non directional ,multi-colour polymer chips, PUR surface protection, anit gungal/ anti bactreial, homogeneous flooring rolls in width of 2mtr and continuous length of 20mtrs laid in floors/ skirtings, surface electrical resistance of 100 Ohms to 1000 Ohms and in approved design and shade , as per the design of approved make such as adventus series of wonder floor/ Armstrong /Responsive SPICS RQ brand or as approved by EIC make conforming to IS standards in roll form with suitable adhesive and joints thermo welded to form seam less surface including cted place, including removing of existing PVC/ ESD flooring and deposited the same as directed place, cleaning of surface and preparation of surface to receive the floor, filing of minor pits / holes if any with Birla putty / cement mortar etc. including cost of all material, labour, cutting wastages, T&P etc., complete all as required and directed by EIC.
Providing and fixing aluminium work Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, dash fasterners all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately) :
Providing and fixing aluminium work Polyester powder coated aluminiumc (minimum thickness of polyester powder coating 50 micron) for shutters of doors, windows & ventilators includingproviding and fixing hinges/ pivots and making provisionfor fixing of fittings wherever required including the costof EPDM rubber / neoprene gasket required inlcuding necessary hardware fittings as per direction of EIC, aluminium powder coated handles, locking arrangements etc complete all as required and directed by EIC.
Providing and fixing glazing in PVC / aluminum door, window, ventilator shutters and partitions etc. With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm), with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.) etc all complete as required and directed,
Providing and fixing double action hydraulic floor spring of approved brand, With stainless steel cover plate minimum 1.25 mm thickness, and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.
Providing and fixing 12 mm thick prelaminated particle board, Pre-laminated particle board with decorative lamination on both sides, flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws, cutting, wasatge etc. complete as per architectural drawings and directions of engineer-in-charge.
Providing and fixing ISI marked flush door shutters 35 mm thick conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.r, fixing to wooden/ MS frame etc all complete including Stainless Steel butt hinges ( 100 mm size medieum weight minimum 03 for each shutter or as per site requirement) with necessary screws, inclduing cutting, wastage, making provisions for hardware fittings, etc all complete as required and directed by EIC.
Supplying and fixing of following Doors shutter fittings by screw / welding of approved make conforming to relevant IS, approved made eg godrej, dorma, etc., complete at all heights including cost of all materials, steel GKW screws , consumables,labour, wastages, T&P etc., as per specification, drawing and as directed by Engineer in charge.
Providing and fixing bright finished brass handles with screws etc. complete size-125 mm as per approved make etc all complete as requried and directed by EIC.
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete- 250 x 10 mm as per approved make etc all complete as requried and directed by EIC.
Providing and fixing aluminium sliding door bolts-, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete. Size- 300 x 16 mm as per approved make etc all complete as requried and directed by EIC.
Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete- 100x58x1.90 mm as per approved make etc all complete as requried and directed by EIC.
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete as per approved make etc all complete as requried and directed by EIC.
Providing and laying flamed finish Granite stone flooring, Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent etc in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge
Providing and laying Vitrified tiles, double charged polished / mat finish, in floor in different sizes Size of Tile 600 x 1200 mm or as per site requirement of approved size by EIC .(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer eg Somany, Kajaria, Jonsin, Orient bell etc in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily etc as per approved make etc all complete as requried and directed by EIC.
Providing and applying two coats or more coats of synthetic enamel paint of Ist quality of Berger/ Shalimar/ Asian/ Jenson & Nicholson/ ICI paints of approved brand conforming to relevant IS on all steel / wooden primer finished surfaces including surface preparation, primer wherever required, including cleaning the dirt and other impurities, scrapping smooth and filling crevices with approved filler of approved brand, including cost of all material, labours,ladders/ scaffoldings, brushes, T&P etc. complete at all height as per specification, drawing and as directed by Engineer in charge.
Providing & applying two coats of Acrylic Smooth exterior paint of required shade : Old / New surface (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) of first quality superior paint of approved shade and make like apex ultima of Asian /weather coat long life of Berger/weather shield max of ICI etc including preparation of surfaces, by brooming down, removal of flakes, oil, grease marks by sand papering where required, filling holes /Cracks with birla putty / snowfilla, spreading and removing covering to doors, windows, fittings, floor, etc. to protect from splashes, removing & replacing moveable furnitures, leaving the premises clean and tidy, disposing Rubbish outside in dustbins removal of all splashes and cleaning glass and joinery, use of scaffolding all complete as per specification & direction of EIC.
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification Two or more coat over and including water thinnable priming coat with cement primer having VOC content less than 50 gm/ liter, removal of exiting paint surface wherever requried, etc all complete as required and directed by EIC.
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth etc all complete as required and directed by EIC.
Dismantling asbestas cement sheet / steel sheet / PVC roofing inculding ridge, hipe , valleys and gutter etc and stacking the materia within 50 meter lead including all lead & lifts, storing at directed place etc all complete and as directed by EIC
Providing and fabricating and erecting Mild steel work for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. including a coat of zinc Chromate primer, including the cost of all labours for cutting in shape and size , fabrication and erection of , scaffolding, T&P etc complete as per desingn, specification and as directed by EIC.
Providing & fixing 0.56 mm, Aluminium Color coated troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm. at all heights, levels and locations colour finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer, including side laps as per site requriement and CPWD specification etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately).
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
NIT.pdf
TENDER_DOCUMENT • 0.09 MB
TECHNICAL_BID.pdf
TENDER_DOCUMENT • 1.08 MB
PQ.xlsx
TENDER_DOCUMENT • 0.01 MB
BOQ1.xlsm
TENDER_DOCUMENT • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .