Colaba-Extension of Badwarpark officers rest House and allied Facilities.

A-All DSR Items

A-All IRUSSOR WR Items

Supply and using Cement at Worksite Ordinary Portland Cement 53 grade of approved brands/makes Above/

Providing and erecting approach system from outside the building to facilitateexecution ofwork items intheform of steel tubular trestle type scaffold of approved design withnecessary working platforms ofapproved design,ladders,guard rails, bottom runners, 1 foundationsetc., or in the form of suspended platforms,working platforms and riggers,counterweightarrangements, wire ropes, breaking / locking arrangements orcombination of above two methodsincludingprovidingarrangements to control / arrest falling debris etc., completeand dismantling andcarting away the system when the jobis over.The system shall be so designed by contractorso as toreach any exterior location work. The item shall be paid only once. Payment will be made for length and height of scaffolding measured in elevation only

- Providing and fixing 18-20mm thick deserts granite over 20mm thick cement mortar 1:3for door window frames and dado borders and design . Rate shall include all labour, material and transport tosite inclusive of all taxes and octroi etc

Supply and fixing 12 mm thick Toughened Etched glass with all edge Machine polished. The rate shall includecost of all materials , labour, tools & plants and with all lead, lift, transportation, taxes etc. Complete

Supplying and fixing counters/cupboards made of marine ply of kit ply gold orGujranplyorsimilarconforming to IS 710 as per following description.The top shall be supported byverticalsupportsof marine ply and fixed towallwithout any gap.Drawers with wooden knobs, lockingarrangementsandsliding arrangements consisting of PVC slidingrollers onaluminium angles 5 shall be providedasperapproved drawings.Shelves as per approved drawings below the workingplatformwith horizontalandverticaldividers, shutters of marine ply with brass hinges, wooden knobs andlockingarrangementswithbrass locksshall be provided.Cost of providing veneer, polishing and CT woodworkinvolved will be paidseparately.Paymentwillbe made for actual area of marine ply and used in the workasper following itemsand no extra payment will be made forfittings,sliding arrangements etc

Supplying ,cutting and fixing adjustable aluminium louvers of 100 mm blade with 6 suitable handle and fixing4mm thick glass sheets in louvers blades of approved quality with five joints etc. complete(Payment will be made in sqm i.e. area of clear opening shall be measured correct to two places of decimal

Supplying and fixing 5mm mirror with design hatching line all round edgewith 7 aluminum anodised frame,powder quoted with copper colour or any other colour as directed byRly.Engineer.Aluminum frame shall be 40mm thick with hard board packing behind the mirror and providedwith hanging arrangements. The quality of mirror shall be confirm to Modigaurd or similar

Providing and Fixing Two way bib cock chromium plated (toilet bib) of jacquar makecode No- 041/Marc Series No- MOR1380 or similar as approved by engineer in charge with all contractor'smaterial, labour, tools & plants etc. complete with all lead & lift

- Supplying & fixing twelve inches size BRASS ALDROPS with necessarybrassscrewsand 9 makinggoodthesurface after dismantling existing and depositing in store ofconcernedSectionalEngineer. The rate is inclusive ofallcontractors'labour, T&P, Materials, all leads,lifts,transportation, taxesetc., complete

Supply, Providing and fixing Wall paper France German made or similar on 10 existingsurface including adhesive, material, labours, lead and lift complete in all respect. Rate includes cleaning thesurface making in good condition for application of the wall paper so that the application with out anybubbles etc. complete

Providing and Fixing shower rose chromium plated with bracket of jacquar make codeNo- 491/Marc series No- MOR-1240 & MOR 1260 or similar as approved by engineer in charge with allcontractor'smaterial, labour, tools & plants etc. complete with all lead & lift.

Providing and Fixing angle cock chromium plated ( Under Wash basin ) of jacquar makecode No- 053/marc Series No. MOR1060 A of similar as approved by engineer in charge with all contractor'smaterial, labour, tools & plants etc. complete with all leads & Lifts

Supplying and fixing designer wooden beading Patti size 1" to 1,1/4" 13 (Inche)widthtoexisting frame.Sampleshall be got approved by engineerincharge at site before bringing same to thesite.The rate including all labours materials& T&Petc complete frame work will be paid separately

Providing and Fixing bottle trap chromium plated of jacquar makes code No- 769/MarcSeries No- MOR-1350 or similar as approved byengineer in charge with all contractor's material, labour,tools&plants etc.complete with all leads & Lifts

Providing and Fixing basin waste coupling 32mm dia chromium plated of jacquar makecode No- 705/Marc Series No- MAC-3020 or similaras approved by engineer in charge with all contractor'smaterial,labour, tools &plants etc.complete with all leads & Lifts

Providing and Fixing towel rack chromium plated of jacquar continemtal series No- 1181/Marc Series No.- MOR-4090 or similar as approved by engineer in charge with all contractor's, material,labour,tools & plants etc. complete with all lead & lift

- Supply and Fixing Roller blind as per sample available at SSE(W) includingallcontractor's labour, tools and plants,etc., all leads, lifts, transport, taxes etc., complete

- Providing and Fixing double coat hook chromium plated of jacquar continental series N-1161/ Marc Series No- MOR - 4050 or similar as approved by engineer in charge wiyh all contractor'smaterial, labour, tools & plants etc. complete with alllead & lift

Providing and Fixing Pillar Cock chromium plated (mixer) for wash basin jacquar makecode No-167/Marc series NO. MOR-1100 or similaras approved by engineer incharge with all contractor'smaterial, labour, tools & plants etc. complete with all lead & lift

Providing and Fixing Spray hose chromium plated of jacquar make code No. 563 /MarcSerise No. MAC-3050 or similar as approved by engineer in charge with all contractor's material, labour,tools & plants etc. complete with all lead & lift

Providing WATER PROOFING treatment with CHINA MOSAIC on terrace slab as per following specifications(a) Preparing the surface for water proofing treatment by scrapping & brushing the surface so as to remove all loose materialsafter removing old tar felt, bitumen, fibre glass tissues etc.& washing the surface with water. Dismantling of concrete if ordered tobe done by the Railway 21 Engineer or his representative will be paid for separately (b) Providing cement concrete to proper slopesas directed by the Railway Engineer or his representative. However cost of cement concrete will be paid separately underUSSOR items. (c) Applying one coat of polymer based water proofing compound of approved make & quality with Cement. Onekg of polymer based water proofing compound mixed with 2 Kg of cement should cover an area of 2.80 Sqm. (d) Laying brokenchina Mosaic (broken pieces of china glazed tiles) 6mm thick of approved colour set in 20mm thickness of Cement mortar 1:3mixed with water proofing compound of approved make & quality to correct level & slope. The joints shall be finished by pouringcement slurry of good consistency and brooming down. The china glazed tiles shall be closely packed such that they coveratleast 90% of the slab area. (e) The above treatment shall be provided on the parapats/any other wall up to 30 cm above floorlevel and the junction between the wall & the parapat rounded off in shape of an arc of a curve. The tiles then be cleaned with wetcloth. (f) Curing should be done continuously so as to render the surface hard . (g) The rate includes making proper outlets atentry of the down take pipes. Dismantling & refixing the bends of the down take pipe to proper level if required shall also be donefor which payment will be made in USSOR items. (h) The oulets should be plugged and water stagnated to detect the leakageswhich shall be rectified. (i) The rate shall exclude the cost of cement which will be paid for separately

- Supplying & fixing hand shower assembly of C.P. brass with mixer for hot and cold water and with all C.P. brass fittings. The material should be got approved by the Rly. Engineer in respect of colour type design and quality

- Providing and fixing stop cock chromium plated o f Jaquar make coda No.069/Marc series No.MOR-1040 . Rate includes cost of alln materials, labours, T&P, transportation, lead, lift, taxes, cotroi etc. complete. As directed by engineer Square

Supply and fixing brass name plate

Item Breakup - A-All DSR Items

wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). Total 4714507.20 Item- 6 Chapter-10 S No. Item No Description of Item Unit Qty Rate Amount 10.0 STEEL WORK 10.2 Structural steel work riveted, bolted or welded Kg 15000 111.95 1679250 in built up sections, trusses and framed work, 1 including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 10.28 Providing and fixing stainless steel ( Grade 304) Kg 275 612.25 168368.75 railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & 2 stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Total 1847618.75 Item- 7 Chapter-11 S No. Item No Description of Item Unit Qty Rate Amount 11.0 FLOORING 11.41S VITRIFIED FLOOR TILES MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid 11.41 on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 1 11.41.2 Size of Tile 600x600 mm Sqm 50 1416.65 70832.5 2 11.41.3 Size of Tile 800x800 mm Sqm 790 1879.95 1485160.5 Total 1555993.00 Item- 8 Chapter-12 S No. Item No Description of Item Unit Qty Rate Amount 12.0 ROOFING Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry 12.40 surrounded with 12 mm thick cement mortar of the same mix, as that of masonry (lead caulking will be paid for separately): Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 12.41 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 1 12.41.1 75 mm diameter Metre 150 213 31950 2 12.41.2 110 mm diameter Metre 100 319.75 31975 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes 12.42 conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 12.42.1 Coupler 3 12.42.1.1 75 mm Each 50 79.8 3990 4 12.42.1.2 110 mm Each 60 119.95 7197 12.42.3 Single tee with door 5 12.42.3.1 75x75x75 mm Each 80 141.55 11324 6 12.42.3.2 110x110x110 mm Each 100 205.45 20545 12.42.4 Single tee without door 7 12.42.4.1 75x75x75 mm Each 80 124.2 9936 8 12.42.4.2 110x110x110 mm Each 100 190.75 19075 12.42.5 Bend 87.5 degrees 9 12.42.5.1 75 mm bend Each 70 91.8 6426 10 12.42.5.2 110 mm bend Each 80 132 10560 12.42.6 Shoe (Plain) 11 12.42.6.1 75 mm Shoe Each 60 81.1 4866 12 12.42.6.2 110 mm Shoe Each 70 115.95 8116.5 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of 12.43 required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 13 12.43.1 75 mm Each 120 310.85 37302 14 12.43.2 110 mm Each 150 309.5 46425 MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. 12.45 wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.45.1 12.5 mm thick tapered edge gypsum plain Sqm 360 1145.95 412542 15 board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) 12.50 Providing and fixing precoated galvanised iron Sqm 580 671.55 389499 profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to 16 avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Total 1051728.50 Item- 9 Chapter-13 S No. Item No Description of Item Unit Qty Rate Amount 13.0 FINISHING 13.11S CEMENT PLASTER IN TWO COATS MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY 13.11 18 mm cement plaster in two coats under layer Sqm 2150 442.75 951912.5 12 mm thick cement plaster 1:5 (1 cement : 5 1 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). 13.25 Extra for plastering: 13.26 Providing and applying plaster of paris putty of Sqm 2398 214.3 513891.4

prepare the surface even and smooth complete. 13.44S EXTERIOR FINISHING Finishing with Deluxe Multi surface paint system 13.48 for interiors and exteriors using Primer as per manufacturers specifications : 13.48.1 Two or more coats applied on walls @ 1.25 Sqm 5010 158.95 796339.5 3 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm 13.48.3 Painting Steel work with Deluxe Multi Surface Sqm 3000 140.05 420150 Paint to give an even shade. Two or more coat 4 applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture Applying priming coats with primer of approved 13.85 brand and manufacture, having low VOC (Volatile Organic Compound ) content. 13.114 Melamine polishing on wood work (one or more Sqm 500 118.35 59175 5 coat). Total 2741468.40 Item- 10 Chapter-15 S No. Item No Description of Item Unit Qty Rate Amount 15.0 DISMANTLING AND DEMOLISHING Demolishing brick work manually/ by mechanical means including stacking of 15.7 serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 1 15.7.4 In cement mortar cum 42 1698.45 71334.9 Taking out doors, windows and clerestory 15.13 window shutters (steel or wood) including stacking within 50 metres lead : 2 15.13.1 Of area 3 sq. metres and below Each 5 118.3 591.5 15.19 Dismantling steel work manually/ by Kg 10000 3.2 32000 mechanical means in built up sections without 3 dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge. Dismantling tile work in floors and roofs laid in 15.23 cement mortar including stacking material within 50 metres lead. 4 15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 792 60.5 47916 15.56 Dismantling old plaster or skirting raking out Sqm 240 45.05 10812 joints and cleaning the surface for plaster 5 including disposal of rubbish to the dumping ground within 50 metres lead. 15.60 Disposal of building rubbish / malba / similar cum 500 219.35 109675 unserviceable, dismantled or waste materials by mechanical means, including loading, 6 transporting, unloading to approved municipal dumping ground or as approved by Engineer-in- charge, beyond 50 m initial lead, for all leads including all lifts involved. Total 272329.40 Item- 11 Chapter-16 S No. Item No Description of Item Unit Qty Rate Amount 16.0 ROAD WORK MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY 16.49S MISCELLANEOUS 16.68 Providing and laying 60mm thick factory made Sqm 385 951 366135 cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, 1 design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. 16.81 Providing and erecting 2.00 metre high Metre 90 2827.4 254466 temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iron or 50x50x3mm hollow MS tube posts/horizontal members/bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 30x5mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. MS channel ISLC 75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at 2 both ends. The work shall be executed as per drawing/direction of Engineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineer-in-Charge. Total 620601.00 Item- 12 Chapter-17 S No. Item No Description of Item Unit Qty Rate Amount 17.0 SANITARY INSTALLATIONS Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, 17.10 including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.2 Kitchen sink without drain board 1 17.10.2.1 610x510 mm bowl depth 200 mm Each 10 4274.4 42744 17.35 Providing and fixing soil, waste and vent pipes : 17.35.1 100 mm dia 17.35.1.2 Centrifugally cast (spun) iron socket & spigot Metre 80 1077.4 86192 2 (S&S) pipe as per IS: 3989 17.35.2 75 mm diameter : 17.35.2.2 Centrifugally cast (spun) iron socketed pipe as Metre 60 1042.1 62526 3 per IS: 3989 MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 17.37 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : 4 17.37.1 For 100 mm dia pipe Each 60 308.45 18507 5 17.37.2 For 75 mm dia pipe Each 30 304.45 9133.5 Providing and fixing bend of required degree 17.38 with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 17.38.1 100 mm dia 6 17.38.1.2 Sand cast iron S&S as per IS - 3989 Each 40 597.6 23904 17.38.2 75 mm dia 7 17.38.2.2 Sand cast iron S&S as per IS- 3989 Each 60 453.4 27204 17.81 Providing and fixing floor mounted, white Each 10 16100.4 161004 vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres 8 with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in- Charge. Total 431214.50 Item- 13 Chapter-18 S No. Item No Description of Item Unit Qty Rate Amount 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one 18.8 step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the wall etc. 1 18.8.2 20 mm nominal dia Pipes Metre 200 513.75 102750 2 18.8.4 32 mm nominal dia Pipes Metre 170 712.75 121167.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes 18.9 jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.-External work 3 18.9.7 65 mm nominal dia Pipes Metre 100 1576.9 157690 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES 18.48 Providing and placing on terrace (at all floor Litre 10000 9.7 97000 levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking 4 arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Total 478607.50 MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY Item- 14 Chapter-21 S No. Item No Description of Item Unit Qty Rate Amount 21.0 ALUMINIUM WORK Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with 21.1 required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing 21.8 weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 1 21.8.1 Upto 5mm depth and 5 mm width Metre 836 85.25 71269 Total 71269.00 Item- 15 Chapter-26 S No. Item No Description of Item Unit Qty Rate Amount 26.0 NEW TECHNOLOGIES AND MATERIALS 26.28S REPAIR AND REHABILITATION ITEMS Providing, erecting, maintaining and removing temporary protective screens made out of specified fabric with all necessary fixing 26.36 arrangement to ensure that it remains in position for the work duration as required by the Engineer-in-charge. 1 26.36.1 Wooven PVC cloth Sqm 600 45.7 27420 Total 27420.00

Item Breakup - C-All NS items

19 mm marine ply conforming to IS 710

12 mm marine ply conforming to IS 710 Total 185200.00