REPAIRS TO COLOUR COATED SHEETS, FALSE CEILING, WPT, FLOORING AND CONNECTED ITEMS AT TRG REGIMENTS, DEPOT REGIMENTS AND BSO YARD AT ARTY CENTRE.

Amount

Dismantling asbestos cement (corrugated,semi corrugated)sheets in roof covering

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and making good to wall and roof joint.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutter, drip and straight flashing.

Dismantling wrought iron or mild steel work of any description not otherwise provided for including gas cutting, welding etc.

S&F rolled mild steel Joist, channel, angle, flat sections, fixed independently, without connecting plates, or M S tubular sections etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) grade Fe 290( E-165) all as directed by Engr-in-charge

S&F Mild steel Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 ® complete all as specified and directed

M&L for preparation of new steel surfaces and applying two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, girth or width exc 10cm

Taking down carefully existing bitumen tar felt incl. Screed and cleaning of surfaces of roof etc. With wire brush incl. Flashing and junctions of parapets/kerb walls etc. And removing of the rubbish to a distance exc. 500 metres but not exc. 1.5 km and deposting where directed.

M&L for Plastering 15mm thick in cement mortar (1:4) on concrete surfaces mixed with water proofing liquid and smooth finished and smooth(without using extra cement).

M&L for Waterproofing on roof including flashing and junction of parapet, kerb, wall etc. As under (a) Applying bituminous primer on cleaned and dried surface @ 0.2 kg/sqm. (b) Laying by thermo fusion ( torch applied) 3 mm thick APP based polymeric water proofing membrane weighing not less than 3.5kg/sqm and reinforcement with polyester non woven fabric ( not less than 150 gms/sqm) (c) Painting the exposed APP membrane surface with bituminous aluminium paint @ 0.15kg/sqm

Supply only liquid water proofing compound

Demolition of brick work or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillers etc but including ashlar facings, dressed stone work and precast concrete articles

M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 with old size bricks.

M&L for polygonal rubble mesonry, uncoursed well bonded bedded and solidly hearted built in CM 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc. including removing all the debris out side MD land

M&L for rendering 15mm thick in cement mortar(1:6) on Stone/ brick masonry surfaces or surfaces other than fair faces of brick work and finishing even and smoothcomplete all as specifed and directed

M&L for preparation of plastered surfaces of walls by washing, rubbing down,stopping and applying two coat of oil bound distemper over a coat chalk whitening primer prepatory to distemper on walls.

M&L for rendering 15 mm thick cement mortar on stone surfaces or other than fair faces of brick work in cm 1:4 finished even and fair with out using extra cement complete all as specifed and directed

M&L for Preparation of newly plastered surfaces of any description and applying two coats of cement base paint on walls over a coat of chalk whitening primer complete all as specified and directed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs exc 250 n exc 500 litre, cleaning, etc. and hoisting if required reconnecting and refixing in position. (Cleaning repairing, etc. measured separately)

Dismantling water tanks of capacity Exc 500 Ltrs but n. exc 1000Ltrs and removing to from site or to store complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 ltr.

Cutting and pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills sunshades, shelves, lintes, etc making good, cutting exc 20 cm girth in slab walls

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness(Below or above ground level) un-reinforced complete all as specified and directed.

M&L for type B1 (1:2:4) (20 mm graded aggregate) cement concrete in roof kerbs or mud stops, rounded or chamfered on edges

Dismantling wall and ceiling boards( Fibre, pulp, insulation etc) or insulation boards any thickness including cover fillets complete all as specified & directed.

S&F interlocking aluminium powder coated snap grid consists of main Tee runners of size 38mm x 25mm x 1.00 mm spaced 1200mm centre to centre and cross Tee of size 25mm x 25mm x1.00mm, 1200 long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mm x 600mm and provide a secondary cross Te 25mm x 25mm x 1.4mm (of length 600mm) to be interlocked of the centre of 1200mm x 600mm panel to form a grid of 600mm x 600mm and wall angle 25mm x 25mm x 1.5mm . Aluminium alloy extruded section shall be aluminium anodized ( minimum 15 micron) and shall conform to IS 733, IS 1285 and IS 737, and providing and fixing with Hangers of 4mm dia GI (upto 1200mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long size of grid 600 x 600mm complete all as specified and S&F non asbestos cement pre-painted building board 4mm thick of “in ceiling fixed with screw as per manufacturer instruction”

Repairing broken edges of RCC chajjas, roof projections, fins, facia and similar works by dismantling of loose and damaged/ disintegrated portion of edges (cross sectional area not exceeding 150 sqcm) and cement mortar 1:4 or cement concrete 1:1½:3 type A0 and chicken wire mesh with nails (to hold fresh mortar/concrete) including necessary formwork etc. and scaffolding for work upto four storied buildings and finishing the surface by white wash or cement base paint to match the surface with existing work.

Taking up or down 20 mm dia tubes galvanized iron and connections and removing/shifting from site incl cleaning where directed complete all as specifed and directed

All as per Item No. 29.00 but size 15 mm dia

Re-fixing only 20 mm dia tubes galvanized iron and connections fixed to walls or laid in floor supplying & fixing new fittings such as socket, bends, elbows nipple, union etc all as specified and directed of size complete all as specified and directed

All as per Item No. 31.00 but size 15 mm dia

S&F for tubes medium grade, galvanized with iron all fittings fixed to walls, ceiling and laid in floor of 20 mm dia size complete all as specified and directed

All as per Item No.33.00 but size 15 mm dia

S&F in repairs Ball brass valves, high pressure, with polythene float and flynut for 20 mm bore dia pipe complete,screwed for iron pipe or brass ferrule and fixed

S&F in repair 15mm Gun metal,globe or gate valves,with iron wheel head,screwed both ends for iron pipe

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness(Below or above ground level) un-reinforced complete all as specified and directed.

Dismantaling of stone slabs of any descripation or thickness in floors, aprons etc laid bedded & pointed in any mortar complete all as specifed and directed

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate), 75mm thick as in sub base all as specified and directed.

M&L for Hard core of gauge n.exc 63mm deposited spread levelled in layers n.exc 15cm thick watered and rammed to a true surface using broken stones boulder complete all as specified and directed.

M&L for Machine pressed precast conctete interlocking paver block with grey cement and pigment with rubber moulded glossy finished surface, any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade laid over and including 30 mm thick stone dust cushion.

M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

S&F Machine cut kota stone slab 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specifed and directed

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with gray cement slurry with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Screed bed or bedding layer of cement mortar 20 mm thick for laying floors finishes in cement mortar 1:6 complete all as specifed and directed

Dismantling floor hearth or wall tiling including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premises.

M&L for joint free coloured non skid ceramic tiles 7mm to 8mm thick area of each tile exc 0.06 sqm but not exceeding 0.11 sqm thick set and jointed in neat cement slurry nd pointed in coloured cement to match in floor etc complete all as specifed and directed Note : Cement mortar screed bed layer shall be measured & paid separately

M&L for coloured glazed ceramic tiles 300 x 200 x 7-8mm / 300 x 450 x 7-8mm thick in vertical surface, set and jointed in neat cement slurry & pointed with white or coloured cement to match

M&L for 15mm thick Screed bed or bedding layer in cement mortar 1:6 for laying floors finishes

M&L for 10 mm thick rendering in CM 1:4 on brick masonary or concrete rough finished surfaces as backing coat

M&L for painting with one coat of synthetic enamel paint on old wooden/steel surfaces exc 10cm width or girth including preparation of old wooden surfaces all as specified and directed by EIC.

M&L for complete removal of existing wall surfaces including preparation (i.e. brooming down on plastered / unplastered surfaces complete) and applying two coat of Acrylic weather proof exterior paint over water based primer complete all as specified and directed.

S&F repairs bib taps standared of PTMT 15mm bore dia any colour high presure screwed for iron pipe fixed and repairs (minimum weight 90 gms) complete all as specified and directed

S&F in repair stop valve, 15mm bore dia PTMT of any colour high pressure screwed for iron pipe and fixed (Minimum weight 90 gms) complete all as specified and directed

S&F in repair Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms complete all as specified and directed

S&F in repair Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms complete all as specified and directed

NOTE :- AMOUNT OF SCHEDULE OF CREDIT RS. 29,465.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

M/s. JBSR ENTERPRISES.

M/S SAMEER SUBHASH PATANI

Vinod Enterprises

UNITED ENTERPRISES

Abhiraj Enterprises

Vishal Constructions

L.K.R.TIWARI CONSTRUCTION

M/s. SHRI SAINATH ENTERPRISES

Bidder Name

Vishal Constructions

M/S SAMEER SUBHASH PATANI

Alpha Construction

UNITED ENTERPRISES

L.K.R.TIWARI CONSTRUCTION

Vinod Enterprises

M/s. JBSR ENTERPRISES.

M/s. SHRI SAINATH ENTERPRISES

Abhiraj Enterprises