Renovation work of the meeting hall at the Nagar Palika Bilhaur Office

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross-T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge With fully perforated 12 mm thick micro tegular edged or 10 mm thick square edged GRG false ceiling tiles.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade two or more coats applied @ 1.43 ltr/10 Sqm over and including priming coat of exterior primer applied 0.90 litre/10 sqm.

Providing and fixing Ultraviolet sheet in wall Cladding with approved quality

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched 4teak 3 ply vencering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete

Providing and fixing bright finished brass tower bolts (barrel type) withnecessary screws etc, complete 200x10 mm DSR 9.74.2

Providing and fixing bright finished brass door latch with necessary screwsetc. complete :300x16x5 mm DSR 9.75.1

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (copper oxidized as per IS: 1378) 300x16 mm DSR 9.62.1

Providing and fixing bright finished brass handles with screws etc.complete: 125 mm DSR 9.81.1 each

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete DSR 9.82