Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.0 LAccepted-AOC 361 BEHIND DAV SCHOOL JAWAHAR NAGAR SRINAGAR 190008 | SRINAGAR | JAMMU AND KASHMIR | 190008 | L1 | Accepted-AOC L1 | |
| 2 | L2₹9.4 L+₹1,767.16 (0.19%)Rejected-Finance BETONG SHOP KHANGSAR COMPLEX NOWSHARA LEH LADAKH 194101 J K | LEH | LEH | JAMMU AND KASHMIR | 194101 | L2 | Rejected-Finance L2 | |
| 3 | L3₹10.4 L+₹1.0 L (11.0%)Rejected-Finance 12 DORU DOORU VERINAG ROAD NEAR TOWN HALL ANANTHNAG JAMMU KASHMIR 192211 | ANANTNAG | JAMMU AND KASHMIR | 192211 | L3 | Rejected-Finance L3 | |
| 4 | L4₹10.8 L+₹1.5 L (15.7%)Rejected-Finance | L4 | Rejected-Finance L4 | |
| 5 | L5₹10.9 L+₹1.5 L (16.2%)Rejected-Finance | L5 | Rejected-Finance L5 |
Tender Value
₹8.6 L
EMD Value
₹17,200
Closing Date
17 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Khumbathang
GE Khumbathang-900270
SPECIAL REPAIR TO BUILDING NO T-04 (OR LIVING ATTACH LINE) OF SATA AREA IN THE AOR OF AGE B/R-I UNDER GE KHUMBATHANG
2023_MES_630911_1
GE/KHU-64/2023-24
Open Tender
Support/Maintenance Service
Item Rate
180 days
GE Khumbathang
As per NIT
8 documents required · 8 mandatory
₹500
GE Khumbathang
₹17,200
Yes
9 Jan 2024
4 Dec 2023
19 Dec 2023
4 Dec 2023
17 Dec 2023
10 Dec 2023
Amount
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engrs-in-Charge.
PCC 40mm thick type B-1, 1:2:4 (20mm graded crushed stone aggregate) as in path complete all as specified and directed by Engrs-in-Charge.
Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid over 20 mm thick screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engrs-in-Charge.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed by Engrs-in-Charge.
Supply and fixing of 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screw and washers, in roofs, walls etc with grade of zinc coating 275 as in roof covering/cladding to wall, fixed with L-type or J-type or cranked hook bolts in lieu of screws complete all as specified and directed by Engrs-in-Charge.
Supply and fixing of 0.63 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engrs-in-Charge.
Prepration of surfaces and applying two coat of synthetic enamel paint (finishing coat) over one coat of red oxide primer to new steel/iron surfaces of any description over 10 cm width or girth complete all as specified and directed by Engrs-in-Charge.
Demolition of Brickwork or stone/boulder masonry, laid in CM for ashlars facings, dressed stonework, precast concrete articles and precast concrete block walling complete all as specified and directed by Engrs-in-Charge.
Precast cement concrete block masonry with solid block exc 10 cms in width made with PCC 1:3:6 type C-1 (using 20 mm graded aggregate) and set in CM 1:6 complete all as specified and directed by Engrs-in-Charge.
Rendering of 10 mm thick on fair faces of brick work or concrete surface in cm 1:6 to be finished even and smooth without using extra cementcomplete all as specified and directed by Engrs-in-Charge.
Rendering of 15 mm thick cement plaster in CM 1:4 on brick work or concrete surface other than fair face or brick work and finished surface even and smooth without using extra cement complete all as specified and directed by Engrs-in-Charge.
Preparation of newly plastered surfaces of walls including cornices, pillasters etc, and applying two coats of distamper over a coat of primer complete all as specified and directed by Engrs-in-Charge.
Preparation of new plastered surfaces of walls including cornices, pillasters etc, and applying two coats of cement base paint over a coat of primer complete all as specified and directed by Engrs-in-Charge.
Taking down the chowkat or frame with shutter (without taking of shutter from the frames ) exc 1.5 sqm and not exc 4.00 sqm complete all as specified and directed by Engrs-in-Charge.
Taking down the chowkat or frame with shutter (without taking of shutter from the frames ) n exc 1.5 sqm complete all as specified and directed by Engrs-in-Charge.
Supply and fixing of second class Hardwood plain , solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered , put together with glue pinned at joints supplied and fixed complete all as specified and directed by Engrs-in-Charge.
Supply and fixing for factory made, 2nd class hard wood rail and style 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engrs-in-Charge.
Supply and fixing of hold fasts flats iron Fe-290 Gde-E-165 complete all as specified and directed by Engrs-in-Charge.
Prepration of surfaces and applying two coat of synthetic enamel paint (finishing coat) over one coat of pink primer to new wooden surfaces of any description over 10 cm width or girth complete all as specified and directed by Engrs-in-Charge.
Supply and fixing of 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in sqm n exc 0.5 sqm in each pane complete all as specified and directed by Engrs-in-Charge.
Supply and fixing of 100 mm size mild steel butt hinges, medium weight cold rolled (including fixing with nails/screws or welded as required) complete all as specified and directed by Engrs-in-Charge.
Supply and fixing of 100 mm aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed by Engrs-in-Charge.
Supply and fixing of 250mm Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engrs-in-Charge.
Supply and fixing of 150mm size Aluminium handles, cast type, anodised complete all as specified and directed by Engrs-in-Charge.
Demolition of Cement Concrete of any description and in any position not otherwise specifically provided complete all as specified and directed by Engrs-in-Charge.
RCC Nominal Mix Type B1 (1:2:4) ( 20 mm graded stone aggregates) as in beams cantilever bressumer lintles over 1.5 m span complete all as specified and directed by Engr-in-Charge.
Formwork (rough finished ) to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed by Engr-in-Charge.
Mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping ends and binding with and incl mild steel wire ( annealed ) not less than 0.90 mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.
All per item No 28 above but 5 mm dia and over upto and including 10 mm dia in stirrups complete all as specified and directed by Engrs-in-Charge.
Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thick (below or above ground level) complete all as specified and directed by Engrs-in-Charge.
PCC 50 mm thick type B-1, 1:2:4 (20mm graded aggregate) as in path, complete all as specified and directed by Engrs-in-Charge.
Second class hardwood, Plain fillets, square, rectangular in section of area exc 6 and n exe 13 sqcm, clean sawn, secured with mills or bradscomplete all as specified and directed by Engrs-in-Charge.
Second class hardwood, Plain fillets, square, rectangular in section of area exc 3 and n exe 6 sqcm, clean sawn, secured with mills or brads complete all as specified and directed by Engrs-in-Charge.
Second class hardwood, Plain fillets, square, rectangular in section of area n exe 3 sqcm, clean sawn, secured with mills or bradscomplete all as specified and directed by Engrs-in-Charge.
M & L 9mm thick, prelaminatd particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in ceiling complete all as specified and directed by Engrs-in-Charge.
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engrs-in-Charge.
Dismantling of timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete in unframed work complete all as specified and directed by Engrs-in-Charge.
Taking down carefully copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants , regulators, sockets light fitting etc for taking credit removing from site and making good disturbed surface etc complete all as specified and directed by Engrs-in-Charge.
Material and labour for point wiring with 1.5 sqmm cable FRLS PVC insulated, unsheathed copper multistranded conductor, 1100 V grade of size 1.5 sqmm including necessary termination board 1.5 Sqmm PVC insulated unsheathed FRLS copper conductor as earthing and connected to common earthing with PVC heavy duty casing caping/PVC conduit ISI marked as rquired at site along with all accessories and making good the disturbed surfaces of wall/ ceiling etc for the following : - (a) One light point/ one fan point/ Bell Point controlled by one switch
(b) One 3 pin socket outlet, 5 Amp independent
All as per item No 39.00 above but for point wiring for power point with 2.5 Sqmm FRLS PVC insulated unsheathed copper cable 1100 Volt grade drawn through and including PVC casing caping heavy duty ISI marked /heavy duty conduit ISI marked as required at site alongwith accessories with 2.5 Sq mm FRLS PVC insulated unsheathed copper conductor cable as earthing and connected to common earth complete all as specified and directed by Engrs-in-Charge.
Supply & fixing switch piano flush type single pole one way 5 Amps all as specified complete all as specified and directed by Engrs-in-Charge.
Supply & fixing switch socket combination multi purpose, 5 amp complete all as specified and directed by Engrs-in-Charge.
Supply & fixing Ceiling rose 3 plates flush type 6 Amps,250 volts AC ISI marked complete all as specified and directed by Engrs-in-Charge.
Supply & fixing holder any type for batten fitting complete all as specified and directed by Engrs-in-Charge.
Supply & fixing in repair switch socket combination switch socket outlet 3 pin, 16 amp flush type complete all as specified and directed by Engrs-in-Charge.
Supply & fixing in repair sheet metal enclosure SPN DB 08 way, single phase 240 volts double door with 200 amp rated bus bar complete all as specified and directed by Engrs-in-Charge.
Supply and fix in repair for miniature Circuit breaker (MCB) single pole, 6 to 32 Amp 240 volt C curve 10 KA, IP 20 complete all as specified and directed by Engrs-in-Charge.
Supply and fixing miniature Circuit breaker (MCB) single pole & neutral 240 volt C curve 10 KA, 32 Amps capacity IP 20 complete all as specified and directed by Engrs-in-Charge.
Supply & fixing LED light fitting 1x22 watts, 220 Volts AC decorative box type with driver holder, including LED tube connecting with 3 core copper flexible copper conductor cable of appropriate size from ceiling rose complete all as specified and directed by Engrs-in-Charge.
Supply & fixing LED security light fitting 35 Watts 230 Volts AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket wiyh impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engrs-in-Charge.
Supply and fixing in repair of two single core 6 Sq mm for Sub Main wiring with copper conductor multistranded PVC insulated and unsheathed 1100Volts grade in and including PVC casing capping/ PVC conduit with fixing accessories including one run of 6 Sq mm copper conductor complete all as specified and directed by Engr in Charge. (Note - Two runs of 6 Sq mm cable, one run of 6 Sq mm earth cable and one run of PVC casing Capping shall be measured as one running meter.)
Supply, laying and testing cable 1100 Volt grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more thaen 1 mtr a peart including 4 mm suspended wire one twin core 10 sqmm complete all as specified and directed by Engrs-in-Charge.
Material and labour earthing complete with galvanized steel earth plate 60 cm x 60cm x 6.0mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less less than 1.5 mtr filled around with 15 cm thick alternate layers of charcoal dust and salt and connected to earth lead wire 4mm dia (8 SWG) by means of bolt, nut and check nuts and washers of galvanized iron or steel and thimble and other ends of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15mm bore and watering pipe 20mm dia light grade with funnel and wire mesh, pcc 1:3:6 type C-1 in chambers RCC 1:2:4 type B-1 in pit cover reinforced with 8 mm dia deformed bars 15cm center to center both ways , complete all as shown in electric plate No 3 of MES SSR Part- I complete all as specified and directed by Engr in Charge.
Deduct Credit for Demolished/Dismantled material Rs (-) 19,608.00 (Minus) as listed in Schedule 'A' Part-II (Credit Schedule) Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'.
M/s Siachen Construction Co.
M/S ALI MOHD AND SONS
M/S MOHD HUSSAIN
M/S DUTTA ENGINEERING WORKS
KASHMIR FAIR DEAL SERVICES
Feroz Engineering Works
Amar Singh
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .