Repair to joinery, flooring, plumbing and misc repair in Bn A and C incl Md accn under AGE B/R-II, GE Gurdaspur

Amount

Taking down chowkats or frame with shutter n.exc 1.50 Sqm each (without taking off shutter from the frame/ chowkats) complete all as specified and directed.

All as per Srl item No 01 above but exc 1.50 sqm but n.exc 4.00 Sqm.

Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm.

M& L Non skid dark coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.06 sqm but n. exc. 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to match, over and including 15 mm thick screed bed in cm 1:6 including dismantling floor hearth or wall tilling including cement mortar bedding and removing rubbish off premises complete all as specified and as directed.

M&L Non skid dark Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cm 1:6 incl dismantling floor hearth or wall tilling including cement mortar bedding removing serviceable tile to store and rubbish off premises complete all as specified and as directed.

M&L Non skid dark ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:6 including dismantling floor hearth or wall tilling including cement mortar bedding, removing rubbish off premises complete all as specified and as directed.

M&L machine cut kota stone slab flooring 20-25 mm thick over and including 20mm thick scredd bed or bedding layer in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing including demilition of stone slabs and tiles of any description or thickness in floors, aprons etc laid,beded and pointed in any mortar complete all as specified & directed.

M&L machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over and including cement screed bed 10mm thick in CM 1:4, jointed with grey cement slurry mixed with pigment to match the shade of the slab including demilition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, beded and pointed in any mortar complete all as specified & directed.

M&L for ceramic glazed dark shade coloured tiles of size 450x350x7mm thick joint free on and including 10mm thick screed bed in cm (1:4) set and jointed in neat cement slurry and pointed in coloured cement mixed with pigment to match the colour of tiles on vertical surfaces of wall as in skirting/dado including dismantling floor hearth or wall tilling including cement mortar bedding removing rubbish off premises complete all as specified and as directed.

M&L Green marble (of any type) work (table rubbed and polished), 14 to 18mm thick, in steps , jambs, pillars, window - cills, cooking plate forms and like over and including 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of existing stone slab/ tiles of any description or thickness in floors, aprons etc laid in CM all as specified and directed.

Demolition of cement concrete (unreinforcement) of any description and in any position not otherwise described complete all as specified and as directed.

Roughing the surface of old concrete floor picking sweeping cleaning and washing down with water to remove dust/mud etc.and brushing neat cement slurry @ 3kg/Sqm.

Material & labour Cement concrete 1:2:4 type B-0 using 12.50mm graded stone aggregate as in roof padding, to maintain slope, finished even and smooth without using extra cement complete all as specified.

M&L for Applying evenly a tack coat of hot industrial bitumen 85/25 at the rate of 1.6 kg per sq.m complete all as specified and as directed.

M&L plaster 15mm thick in cm 1:4 in sunken portion of slab finisher fair and even using waterproofing compound complete all as specified and as directed. Note : Supply only WPC shall be measured and paid separately.

Supply only integral water proofing compound

M&L APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3mm thick, reinforced with polyster non wove fabric (weight not less than 150 gms/ Sqm) by forced application with butane torch over entire roof area/ sunken floor with minimum overlaps of 100mm at the sides/ longitudinal edges of strips membrane and 150mm at the ends and sealed in, including bitumen primer @ 0.40 Kg /Sqm after cleaning surface complete all as specified and directed.

M&L for PCC 1:7:12 type E-2 using 40 mm graded stone aggregate as in filling, foundation and mass concrete in sunken floor including demolition of cement concrete (unreinforcement) above ground floor and in any position complete all as specified and as directed.

M&L 25 mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in sub base for receiving the floor finishes including demolition of existing complete all as specified and as directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as directed.

Form work to rough finished surface of concrete flat to soffits of shelves, chajja, fins, cover slab, similar work etc including supports over hangs complete all as specified and as directed.

Material and labour for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for RCC in 1:1.5:3 type A-0 (using 12.5 mm graded stone aggregate) as in chajjas facia, shelves, cover slab etc and similar work complete all as specified and as directed.

M&L 15mm thick cement plastering in cm 1:4 on brick surfaces other than fair faces, finished even and fair for patches upto 2.5 sqm, including taking down cement plaster any description on brick/ block/ stone walls, roof etc. including raking out joints, hacking for key, scrubbing down with water etc all as specified & directed.

M&L 15mm thick cement plastering in cm 1:6 on brick or concrete fair surface, finished the surfaces even and smooth without using extra cement for patches upto 2.5 sqm , including taking down cement plaster any description on brick/ block/ stone walls, roof etc. including raking out joints, hacking for key, scrubbing down with water etcall as specified & directed.

M&L 15mm thick cement plastering in cm 1:6 on brick or concrete surfaces, fair surface, finished the surfaces even and smooth without using extra cement including taking down cement plaster any description on brick/ block/ stone walls, roof etc. including raking out joints, hacking for key, scrubbing down with water etc all as specified & directed.

All as per item No 26 above but 10mm thick on ceiling in CM 1:3.

M&L 15mm thick cement plastering in cm 1:4 on brick surfaces other than fair faces, finished the surfaces even and fair upto height 12m including taking down cement plaster any description on brick/ block/ stone walls, roof etc. including raking out joints, hacking for key, scrubbing down with water etc all as specified & directed.

M&L preparation of new plaster surface and applying two coats of cement base paint complete all as specified upto height 12m.

M&L preparation of new plaster surface of ceiling and applying two coats of white wash complete all as specified.

Preparation of new plastered surfaces and applying two coats of oil bound distemper (of approved shade) (Acrylic) on walls over primer complete all as specified.

M&L for preparation of old surfaces of existing treatment and applying one coat of cement based paint on wall upto height 12m.

M&L one coat of OBD (Acrylic) on old decorated wall surface including preparation of surfaces complete all as specified and directed.

M&L for one coat of white wash on old treated ceiling surfaces including preparation of surfaces complete all as specified and directed.

M&L for complete removal of existing treatment and preparation of old decorated surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

M&L for preparation of new wooden surface exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surface exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide, zinc chrome primer complete all as specified and directed.

M&L prepartion of old painted surface of wood & wood based surfaces of any decsription not other wise described over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

All as per Srl item No 38 above but on steel /iron surfaces

S&F pressed steel frames of size 105 mm x 60 mm for doors with one or more rebates including necessary lugs, hinges, lock strike plate, as per ISI mark, including PCC (1:3:6), type C-0,( using 12.5 mm graded stone aggregates) as in filling of pressed steel frames including one shop coat of priming and two coats of synthetic enamel paint complete all as specified and as directed .

S&F MS Framed work as in doors or gates, chowkats of angle or other section with gusset plates, rails,braces, etc., and similar work conforming to Fe-290 Grade-E-165 complete all as specified and directed.

Supply and fix factory made solid Panel PVC door shutter, 30mm thick (style) consisiting of frame made out of MS tubes for top and bottom rails. M.S. frame shall covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing complete all as specified and as directed.

S&F 35mm thick second class hard wood (Hollock), glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed.

S&F for 35mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed

M&L Prelaminated particle board size 18/19mmm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, as in shutters, shelves and partitions, fixed with screws to timber frame work including taking down existing board all as specified & directed.

S&F 150mm Hasp and staple, safety type, brass, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified & directed.

S&F Aluminium anodized barel tower bolt of extruded section 150mm long

All as per Srl item No 47 above but 250mm long.

S&F aluminium alloyed handle cast type anodized of size 100mm long

All as per Srl item No 49 above but 150mm long

S&F butt hinge medium weight cold rolled mild steel 100mm size

S&F in repair 300 mm long mild steel ordinary rat tail rod pattern spring, including roller and roller plate including fixing through welding/bolts/ screws in metal/wooden frame complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame, glazed with putty or fixed with beads.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty/ bead in square not exc. 0.5sqm in each pane complete all as specified and as directed.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty/ bead in square not exc. 0.5sqm in each pane complete all as specified and as directed.

S&F Figured glass pin head type glazing with oil puty glass 3mm thick, fixed with oil puty in square n exe 0.5 Sqm in each pane.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks all as spd

S&F steel window box type made of ERW tube, hollow P section of size 60mmX25mm double rebated outer frame comprising double skeleton shutters i.e. guaged & glazed, shutter frame of ERW tube P section size 50mmX20mm with two openable leaf for each shutter consisting two Nos sash bar of T-section 20mmX3mm welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and FI 2mm thick welded/ screwed to frame for fixing of wire gauge including MS guard bars, fittings and fixtures welded to frame/ shutters as given below and all as shown on drg No. CEJZ/TD-1020/08 Sh 1/3 to 3/3 including one shop coat of priming and two coats of synthetic enamel paint and taking down old existing window complete:- (i) Thickness of the sheet shall be of 18 gauge (ii) Hold fast,150mm long of flat iron 12mmX3mm- 04Nos per window (iii) Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (iv) MS Tower bolt 150mm long-02 Nos per leaf (v) Z section 20mmX25mm,100mm long stopper -01 Nos per leaf (vi) Cleat 55mm long of hollow square 15mmX12mm -01 Nos per leaf (vii) MS pintol hinges size 75mmx12mm- 2 Nos. per leaf (viii) Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts (four Nos for each window). Note: Wire cloth, glass, shall be measured and paid for separately

S&F steel window/ ventilator box type made of ERW tube hollow P section of size 60mmX25mm outer frame (single rebated) comprising glazed skelton shutter frame of ERW tube P section including MS guard bars, fittings and fixtures welded to frame/ shutters all as shown on drg No. CEJZ/TD-1019/08 Sh 1/3 to 3/3 including Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts, including one shop coat of priming and two coats of synthetic enamel paint including taking down old existing window/ ventilator complete all as specified and directed. Notes: (i) Thickness of the sheet shall be of 18 gauge. (ii) Glass/ wire mesh, shall be measured and paid for separately

S&F in repair galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks all as spd

Taking up and down GI pipe 15mm bore including fittings, connection as spd

Taking up and down GI pipe 20mm bore including fittings, connection as spd

S&F GI tubing 15mm bore medium grade, fixed to wall/ ceiling or floor etc with all fittings ISI marked all as spd

All as per Srl item No 64 above but fixing only (old serviceable pipe re-used including cleaning for reuse)

S&F GI tubing 20mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings ISI marked all as spd

All as per Srl item No 66 above but fixing only (old serviceable pipe re-used including cleaning for reuse)

S&F rotational moulded polyethylene 3-layer water storage tank of 500 ltr capacity, white (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable tank all as specified & directed.

S&F in repair bib taps 15mm dia cast copper alloy chromium plated fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule all as specified and directed.

S&F in repair for 15mm bore angle Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed

S&F in repair stop value 20mm bore cast copper alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc all as spd

S&F in repair brass CP shower rose 125mm size with swivel joint fancy type as spd

S&F 20mm bore ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and as directed.

S&F in repair 20mm bore ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and as directed.

S&F in repair CP brass towel rail `D’ type 60 Cm long fixed to wall all as spd and directed.

S&F 110mm bore PVC (SWR) ISI marks pipes single socketed in any length with rubber ring joints fixed to wall or floor all as specified & directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls or floor complete all as specified.

Dismantling of cast iron ,PVC or SGSW drain pipes, jointed in cement mortar and taking out of trenches , if required

S&F in repair vitreous china squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with PVC `P’ or `S’ trap, integral foot rest including water connection to trap and flushing pipe, flushing cistern etc complete and bedding in PCC 1:7:12 type F-2 complete all as specified Note:- Flush pipe and flushing cistern to be measured and paid separately.

S&F in repair for Vitreous China wash down water closet pan ( pedestal pattern) white(EWC) ( excluding flushing cistern and flush pipe) including plastic water closet seat white with jet, closed pattern with flat botton and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

S&F in repair vitreous china urinal bowl , flat back size 465 x 365 x 265mm white , with grating & union for discharge pipe etc incl fixing plug, bedding urinal against wall in CM (1:2 ), securing urinal to plugs with, 60mm long brass screws, pointing around urinal back in cement paste, 32 mm dia PVC flush pipe and discharge pipe complete all as specified and as directed.

S&F in repairs plastic water closet seat white closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device all as specified and directed.

S&F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed all as specified and directed

S&F in repair CP brass Health faucet (hand shower) including flexible pipe of required length fixing to 15m dia pipe with brass check nut complete all as specifed and directed.

S&F in repair PVC low level flushing cistern 10 ltr capacity with syphonic action PVC float valve, brackets and 32 mm bore PVC flush pipe etc. all as spd.

S&F in repair Vitreous china wash basin, white flat back, size 630x450mm excluding taps, waste,chain and plug and porcelain stopper but including brackets.

S&F in repair Pillar taps, cast copper alloy fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe.

S&F in repair Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms)

S&F in repair PVC waste pipe 32mm dia 600 to 750mm long fixed to wash fitting of wash basin/ urinal all as specified and directed.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm

S&F in repair PVC (SWR ) bends 110 mm bore any radius

S&F in repair PVC (SWR ) bends 75 mm bore any radius

S&F in repair PVC (SWR ) single junction ( single T ) 110mm bore equal or unequal

S&F in repair PVC (SWR ) single junction ( single T ) 75mm bore equal or unequal

S&F in repair PVC (SWR ) vent cowl 110mm bore

S&F in repair PVC (SWR ) vent cowl 75mm bore

M&L PVC (SWR ) floor trap 100/75 mm plain with grating including jointing with solvent cement

S & F in reapir Stack clamps for 110 mm pipe out of 20 mm by 1.5mm galvanised mild steel flat and iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S & F in repair Stack clamps for 75 mm pipe out of 20 mm by 1.5 mm galvanised mild steel flat and iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

M&L for brick work with sub class 'B' brick straight or curved on plan exc 6m mean radius built in CM 1:4 incl demolation of brick work built in cement mortar complete all as specified and as directed .

Supply only oil putty all as specified and as directed .

Supply and fixing in repair cutrain rod 20mm dia of anodised aluminium alloys with fixing brackets, stops, rollers etc fixed to wall with screws, PVC plug complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling, mass concrete and sub base of floors to raise level complete all as specified.

M & L coloured Chequered cement concrete tiles with grey cement and pigment, 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors in floors over and including 15 mm thick screed bed in cement mortar 1:6 including demolition of existing tile and screed complete all as specified and directed.

M&L 60mm thick M-35 grade pre cast Machine pressed concrete interlocking paver block any shape and size confirming to IS 15658-2006 fixed with grey cement and no pigment, filling joints with sand, over and including 20mm thick sand filling all as specified and as directed.

M&L vitrified designer, heavy duty tile of size 400mm x 400mm, 12mm thick, coloured, outdoor, set, jointed and pointed in neat cement slurry with white cement and pigment as in path/ floor, pattern of tile as approved by GE over and including 15mm thick screed bed in CM 1:6 including demolition of existing trile and screed complete all as specified and directed. Make: Somany Durastone, Kajaria Duratech, Johnson Endura or equivalent of Nitco as approved by GE.

M&L Cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in coping, benching, apex stone, bed plate, kneelers complete all as specified.

M&L 50mm thick cement cocnrete type B-1 (1:2:4) (20mm graded stone aggregate) as in plinth protection finishing the surface even and fair including cutting grooves 10mm x 30mm deep at every 3.0m interval and filled with bituminous mastic filling comprising 1 part of heated hot blown bitumen 85/25 and 3 parts of heated sand (all by weight) complete all as specified and as directed.

Taking down cement plaster /deteriorated concrete from bottom of RCC chajjas /RCC facia/RCC beam /RCC slab/brick work with necessary form work , including raking out joints ,hacking for key ,scrubbing down with water (at a building height upto 12.00 mtr ) and removing rubbish to a distance exceeding 50m but not exceeding 100 m away and M & L for 15 mm thick plaster in CM 1:3 finished even and smooth without using extra cement on bottom of RCC chajjas & RCC facia complete all as specified & directed.

M&L decorative laminate1.5 mm type 1 of thickness surface finish (Sunmika), colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions on and including 18 mm thick plywood grade BWR, Type BB for cupboard shutters including demolition of existing complete all as specified and as directed.

S&F in repair beads, straight ( any size ) of second class hard wood for glazed or gauzed joinerny , renewed, including mitres etc complete all as specifed and as directed.

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no) incl sheet glass 4mm thick ordinary qlty in squares, n. exec 0.5 sqm sqm complete all as specified and directed.

S&F in repair anodised aluminium grill (anodised transparent or dyed to required shade according to IS 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws@ 200 mm centre to centre,including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening,all complete as per requirement and direction of Engr-in Charge.

M&L for providing precast cement concrete Type B-0, 1:2:4 (12.5mm graded aggrete) louvres and jallies, 25mm thick (measured solid), including all mouldings, set in CM 1:4 including demolition of existing jally complete all as specified and as directed

Dismantling structural steel work including doors, gates etc all as specified and as directed

S&F for roof trusses (framed), purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc using Fe 410 -W (Gde?E- 250 quality?A?complete all as specified and directed.

S&F in repair 7-8 mm thick PVC hollow wall panelling consisting of wood grain printed pvc sheet inclusive of solvant cement and fixing at site on PVC frame formed by sticking high density EPS, flame retardent (TF) grade, heavy duty with tipper strip weather proof, water proof, termite proof including all C and U type PVC section with matching of panelling fixing at border of panelling and complete all as specified and directed by Engr-In-Charge.

S&F in repair pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / clading to wall, fixed with self tapping screw as specified.

M&L for Cement concrete Type B2 1:2:4 (40mm graded aggregate ) in surface channels and drains complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed.

M&L for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc. of water storage tanks exc 250 ltr & n.exc 500 ltrs including writing letters with paint for date of cleaning complete all as specified and directed by Engr-in-Charge.

Note: A Schedule of Credit for old/unserviceable demolished/dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit.

M/S D Raj And Co

M/s. Nirmal Singh

DEEPAK AND CO

om parkash and sons

AVTAR SINGH RAJU

RATTAN CHAND CHANDAN AND CO

buta singh and sons