Providing 1 No 6 Body cabinet type cold storage plant in the newly extension of Mortuary block in the Government Villupuram Medical College Hospital at Mundiyampakkam in Villupuram District

Supply, erection, testing, commissioning and handing over of 6 bodies Mortuary Cabinet (Containing 6 Bodies ) Mortuary Cabinet Type as detailed Below (A) Supply, fabrication and erection of one number PUF insulated cabinet type mortuary like Blue Star model No.BMC 610 or equivalent to hold 6 bodies in 2-tier arrangement with 1Cabinets as per the following specification and provisions. 1) External cabinet dimensions of 9.7 feet (w) x 7.7feet (D) x 5.7 feet (H) suitable for bodies cabinet with panel thickness not less than 60mm. 2) Insulation with 60mm thick PUF panel with 35 to 40 KG/cumt. 3) Panel finish 0.5mm thick stainless steel with in the front side outer and other outer inner areas with 0.5mm thick pre-painted galvanized steel. 4) Individual doors for each body with chrome plated hinges and locks. 5) All panels to be joined together by means of tongue and groove and locked together by means of cam locks on each side to ensure air tightness, foamed in PVC bubble gasket in all panels. 6) Edge of the doors and door openings to be finished with PVC lining 7) Electronic temperature, indicator cum controller, vapor proof in can-descent light fixture with lamp with plastic coated globe. B) Supply, fabrication and erection of one number split mounted type roof top mounted refrigeration system to maintain +2 deg C to +6 deg C inside the 6 body Mortuary cabinet with the following specifications of capacity not less than 10000 BTU/HR Constructed of G.I.Panels with compressor of make Kirloskar Cope land/equivalent with condenser with condenser coil, evaporator with evaporator fan motor with suction, discharge and liquid refrigerant piping and expansion device etc., complete like Blue Star Model No. BMC 610 or equivalent, Operating on with power supply at 230V+/-10%/single phase/50Hz AC supply. C) Supply, fabrication and erection of 6 Nos, of MS powder coated telescopic structure sliding in the fixed channel within the cabinet each to hold 120kgs of weight when it is stretched fully out. D) Supply, fabrication and fixing of 6 numbers of stainless steel trays with rollers and bush bearing to keep body on the telescopic structure inside the cabinet. E) Providing drainage piping from the evaporator and cabinet to lead drain water just outside the cabinet room. 9) Including Packing and Forwarding Charges.

Supply and fixing of 20A Flush type Wall Socket 32A DPMCB complete set for AC Plug In flush with wall with earth connection (For AC Plug)

Supply and Run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed FRLS copper wire and making good of the concealed portion.

Supply erection, Testing and commissioning of 2 TR split type 3 star rated AC units fitted with hermetically sealed Air compressor with R22 refrigerant air cooled condenser, fan etc. and 1 No indoor Hi wall mounted 2.0 TR capacity evaporator unit complete with cooling coil, blower motor and connected accessories, control etc chord wire connecting indoor and outdoor unit with drain pipe suitable for operation on 230V + 10% 50Hz sinle phase AC supply. (Make - Carrier/ OGeneral/ Daikin/ Toshiba) (SR)

Supply and fixing of 5 KVA voltage stabilizer (V guard /Eq.make ) suitable for 2.0 tons capacity split type air conditioner with 3 minutes time delay and low / high voltage cut off switch (wall mounting) with necessary wire connection.

Supply and laying of 5/8'' and 3/8'' copper pipe (Extr beyond 3Mtrs supplied with AC Unit)(For split AC Unit)

Supply and Fixing of MS stand for fixing outdoor units.(For Split outdoor unit)

Total

GST @ 18%