REPAIR REPLACEMENT OF SERVICE CONNECTION WITH UG CABLE DBS METER BOX EARTHING ETC EAST SIDE AREA UNDER GE EAST AGRA

Amount

Taking down main switches/DB's (alongwith existing board, MCBs & isolators) including removing the same from site and making good disturbed surfaces by cement/colour/plaster to match with the existing location spot complete all as specified & directed.

Taking down existing old/ unserviceable sub main wiring along with fitting/fixtures existing of any type and description, removal of teak wood batten/ PVC pipe/ PVC casing & caping and making good disturbed surfaces of walls, ceilings etc by cement/colour/plaster to match with the existing location spot complete all as specified and directed.

Dismantling of service wire/connection any size/type complete all as specified and directed.

Dismantling of LT UG cable 10 sqmm to 50 sqmm from pole/ trench complete all as specified and directed.

Dismantling of LT UG cable 70 sqmm to 120 sqmm from pole/ trench complete all as specified and directed.

Supply and fix in repair MCB DB sheet metal enclosure factory fabricated double door SPN 8 way with 200 amps rated bus bar 240 volts complete all as specified and directed. Make:- Legrand CAT No.5076 11 or equivalent model of make Siemens/ Schneider.

Supply and fix in repair MCB DB ( VTPN ) 4 way sheet metal enclosure triple pole and neutral 415 volts with 160 Amps MCCB and 250 standard bus bar of suitable size and common neutral link and earth bar all enclosed on standard steel sheet flush mouting type double door factory fabricated complete without MCB but with enclosue blank plate complete all as specified and directed .Make:- Legrand CAT No.5077 50 or equivalent model of make Siemens/ Schneider.

Supply & fix in repair MCB TP, 63 Amps, 'C' series, 415 volts, 50Hz, 10kA complete all as specified & directed.Make:- Legrand CAT No. 4086 83 or equivalent model of make Siemens/ Schneider.

Supply & fix in repair MCB SPN, 40 Amps, 'C' series, 240 volts, 50Hz, 10kA complete all as specified & directed.Make:- Legrand CAT No. 4086 18 or equivalent model of make ABB/ L&T/ Schneider as approved by GE.

Supply & fix in repair RCCB SPN, 40 Amps, 240 volts, 50Hz, 100mA complete all as specified and directed.Make:- Legrand CAT No. 411857 or equivalent model of make ABB/ L&T/ Schneider.

Supply & fix in repair MCB SP, 6 to 40 Amps, 'C' series, 240 volts, 50Hz, 10kA complete all as specified and directed.Make:- Legrand CAT No. 4085 87 to 4085 96 or equivalent model of make Siemens/ Schneider.

M&L in repair for sub main wiring with three runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6 sqmm drawn in and including PVC rigid conduit medium grade not less than 20mm dia with its accessories, concealed type, and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed. Notes:- (i) Finished sub main wiring with three runs of 6 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length. (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles.

M&L in repair sub main wiring with three runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 10 sqmm drawn in and including PVC rigid conduit medium grade not less than 20mm dia with its accessories, concealed type, and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed. Notes:- (i) Finished sub main wiring with three runs of 10 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length. (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles.

S & F of METER BOX sheet metal board with clear sheet top cover for fixing meters complete with wiring, fittings and accessories, locking arrangements and painting of (size adequate for the following equipment, internal wiring and termination of external cables, lugs and glands, indicator lamps and conduits as required, however minimum size 100 cm x 0.70 cm with 2.00 mm CRCA shhet ) comprising of the following duly approved :- ( a ) Incommer 63 A 4 pole MCCB 16 KA adjustable over load setting (80 to 100%) -1 No ( b ) Bus bars 200A TPN & EARTH ( c ) 40 A SPN MCB's, C series -04 Nos (For qtr's Meters) as out going and 01 No MCB, SP, 1.0 Amps ( d ) Taking out carefully existing Electronic type energy meters single phase 240V upto 40 Ampers 50 HZ, LCD display with class 1.0 accuracy, Meter and refixing in new meter box including connection and testing complete -04 Nos

S & F of METER BOX sheet metal board with clear sheet top cover for fixing meters complete with wiring, fittings and accessories, locking arrangements and painting of (size adequate for the following equipment, internal wiring and termination of external cables, lugs and glands, indicator lamps and conduits as required, however minimum size 100 cm x 0.70 cm with 2.00 mm CRCA shhet) comprising of the following duly approved :- ( a ) Incommer 100 A 4 pole MCCB 16 KA adjustable over load setting (80 to 100%) -1 No ( b ) Bus bars 200A TPN & EARTH ( c ) 40 A SPN MCB's, C series -06 Nos (For qtr's Meters) as out going and 01 No MCB, SP, 1.0 Amps ( d ) Taking out carefully existing Electronic type energy meters single phase 240V upto 40 Ampers 50 HZ, LCD display with class 1.0 accuracy, Meter and refixing in new meter box including connection and testing complete -06 Nos

Excavation in trenches in soft/loose soil N. exc 1.5 Mtr wide and not exc. 1.5 Meter deep and getting out including forming bottom surface for laying of cable complete all as specified and directed.

Returning filling including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified.

Removing surplus soil to a distance n.exc 50 Mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point all as specified.

M&L for sand cushioning to under ground cable provided with layers of sand ( 8 cm deep before laying cable and 15 cm after laying cable ) complete all as specified and directed.

M&L for brick covering width equal to length of brick for mechanical protection to cable with well burnt sub class 'B' bricks laid dry flat complete all as specified and directed.

M&L for drilling suitable dia horizontal bore holes and including insertion 50mm dia HDPE pipe below/under existing road surfaces / floors at a level not less than 0.60 mtr etc with using mechanical / or manual devices as required at site including making good the disturbed surfaces to match with the existing after laying pipes complete all as specified and directed. Note : (i) Cost of equipment tools and plant material (horizontal boring rig machine) required for boring shall be arranged by contractor at no extra cost to the Govt.

S & F GI tubing 50 mm dia " light grade" for cable protection including suitable size MS clamp complete all as required and directed.

S & F GI tubing 25 mm dia " light grade" for cable protection including suitable size MS clamp complete all as required and directed.

Supply and lay in trench/pipe/on wall and connection and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade, ISI marked, IS:7098 ( Pt I) with stranded aluminium conductor of size 120 sq mm 3.5 core complete all as specified and directed

Supply and lay in trench/pipe/on wall and connection and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade, ISI marked, IS:7098 ( Pt I) with stranded aluminium conductor of size 50 sq mm 3.5 core complete all as specified and directed

Supply and lay in trench/pipe/on wall and connection and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade, ISI marked, IS:7098 ( Pt I) with stranded aluminium conductor of size 35 sq mm 3.5 core complete all as specified and directed

Supply and lay in trench/pipe/on wall and connection and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade, ISI marked, IS:7098 ( Pt I) with stranded aluminium conductor of size 25 sq mm 4 core complete all as specified and directed.

Supply and lay in trench/pipe/on wall and connection and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade, ISI marked, IS:7098 ( Pt I) with stranded aluminium conductor of size 16 sq mm 2 core complete all as specified and directed

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed twin core 10 sq. mm nominal cross section in service connections complete all as specified and directed

Supply and fixing in repair 100 amps , 4 way, 415 volts busbar chamber, 4 pole, 50 Hz, 415 volts, on wall /pole/panel with proper lugs having 4 Nos of copper bus bars complete all as specified and directed. (Make SHI, HPL, Havells/Shallab)

Supply and fixing in repair 200 amps , 4 way, 415 volts busbar chamber, 4 pole, 50 Hz, 415 volts, on wall /pole/panel with proper lugs having 4 Nos of copper bus bars complete all as specified and directed. (Make SHI, HPL, Havells/Shallab)

Supply and fixing in repair 315 amps , 4 way, 415 volts busbar chamber, 4 pole, 50 Hz, 415 volts, on wall /pole/panel with proper lugs having 4 Nos of copper bus bars complete all as specified and directed. (Make SHI, HPL, Havells/Shallab)

Supplying and fixing in repair MCCB 160 amps with sheet metal enclosure,4 Pole, 50Hz , Icu= 25 KA at 415 volts, with thermal magnetic release & Ics=100% Icu with adjustable over load setting (minimum 80% to 100%) complete all as specified and directed. Make of Legrand/ Schiider/ L & T

Supplying and fixing in repair MCCB 100 amps with sheet metal enclosure,4 Pole, 50Hz , Icu= 25 KA at 415 volts, with thermal magnetic release & Ics=100% Icu with adjustable over load setting (minimum 80% to 100%) complete all as specified and directed. Make of Legrand/ Schiider/ L & T

Materials and labour as in replacement for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized steel wire 4 mmdia as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel with connected to test point and testing on completion including 25mm GI light grade pipe for earth lead protection from earth point to earth plate, including provn adequate quantity of charcoal dust mixed with 35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor

Materials and labour as in replacement for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized steel earth strip 32 x 6mm as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel with connected to test point and testing on completion including 40mm GI light grade pipe for earth lead protection from earth point to earth plate, including provn adequate quantity of charcoal dust mixed with 35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor

M & L for PCC 1:2:4 type C1 (using 20 mm graded stone aggregat) as in foundations, filling and mass-concrete and coping complete all as specified and directed.

M&L for supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed and including one primer coat of red oxide and two coats of aluminum paint, complete all as specified and directed.

Supply and fix cable jointing kit suitable for 16 sqmm to 35 sqmm 1100 Volts grade LT cable for Indoor/outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of the following sizes. Make : 3M / M-seal/ Denson/Reychem

Supply and fix cable jointing kit suitable for 50 sqmm to 95 sqmm 1100 Volts grade LT cable for Indoor/outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of the following sizes. Make : 3M / M-seal/ Denson/Reychem

Supply and fix cable jointing kit suitable for 120 sqmm to 240 sqmm 1100 Volts grade LT cable for Indoor/outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of the following sizes. Make : 3M / M-seal/ Denson/Reychem

M/S RAJENDRA KUMAR AGARWAL

M/s Yash Trading Company

FURNITURE POINT

ASHOK INFRATECH

H.S.Kochhar n Sons