REPAIR/MAINT OF BOUNDARY WALL, GATES, PLASTERING, BRICK WORK, JOINERIES AND PERIODICAL SERVICES USING MECHANIZED EQUIPMENTS AND MISC B/R WORK ZONE A AND ZONE B AT CH (CC) UNDER GE E/M LUCKNOW

Amount

Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre cast concrete articles all as directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving n. exc 15 cm thickness (below or above ground level).

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for.

M&L for Brick work with sub class 'B" (using old size bricks) straight or curved of on plan to any radius in half brick thick walls built in CM 1:6 complete all as specified.

M&L for mild steel TMT bars (Fe-500) 8 mm dia, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binging with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified.

M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in coping, chajja, facia and the like including weathering, slightly rounded or chamfered angles with & incl necessary use and waste of form work for fair faces of concrete

M&L for Super heavy series PVC Wall panelling consisting of 5 mm thick (hollow) Plain / wood colour PVC profile as approved including complete fixing arrangements on wall / ceiling, including dismantling of unserviceable existing wall panelling complete all as per manufactures specifications

S&F false ceiling of E-board of size 600 x 600 x 4 mm thick, white prelaminated seif embossed reinforced designer ceiling board tiles of approved texture at all height including snap grid for false ceiling of size 600 mm x 600 mm grid EXPOSED GRID SYSTEM fabricated with galvanised iron powder coated section all as shown on serial page No 185 of SSR part II (2020 print) complete all as specified directed by the Engineer-in-Charge

M&L for seamless ceiling comprising of Gypsum Board 12 mm thick in ceiling fixed with screw or as per manufacturers instructions, with necessary jointing and taping, and applying two coat oil bound distemper over one coat primer fixed over and including Gl frame work comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre, intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having knurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, including applying 2 coat distemper oil emulsion over 2 mm thick cement base putty complete all as specified & directed.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm

S&F in repairs CP mild steel gratings suitable for 75/100 mm dia for NT/ FT complete all as specified.

S&F in repairs Chromium plated Brass Tubular towel rod, of 24" (60 cm long) complete all as specified.

Taking down Neoprene rubber beading with glass from aluminium joinery and refixing of glass in same opening with new Neoprene rubber beading complete.

S&F 12 mm thick toughened glass ordinary quality and fixed to aluminium joinery with and including neoprene beading, SS clip or cleats of any size any position including taking down of existing unserviceable glass.

M&L for Repairing of existing aluminium door single / double leaf (area of each leaf exc 1 Sqm but n.exc 2.0 Sqm) by taking down tightening of joint, tightening of top & bottom patch, replacement of cleat, screw, oiling and greasing of floor springs, & refixing in same opening for smooth functioning complete all as specified. Note:- Floor door springs where renewed shall be measured and paid separately under appropriate item of BOQ.

M&L for Repairing of existing toughened glass door single leaf (area of each leaf exc 1 Sqm but n.exc 2.0 Sqm) by taking down tightening of joint, tightening of top & bottom patch, oiling and greasing of floor springs, & refixing in same opening for smooth functioning complete all as specified. Note:- Floor door springs where renewed shall be measured and paid separately under appropriate item of BOQ.

Supply & fix in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of mild steel heavy duty fixed.

S&F in repairs Aluminium body ( extruded section ) body Door closer hydraulically regulated, designation No. 2 , universal type , suitable for door shutters 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed

S&F in repairs Mortise lock vertical type of mild steel 4 levers of size 100 mm with duplicate key all as specified.

Excavating in post holes each not exc. 0.5 cum getting out in soft / loose soil, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25 cm, watering and removing surplus soil to a distance not exc. 50 m and depositing where directed

M&L for PCC 1:4:8 type D-2 as in foundation and mass concrete using 40 mm graded stone.

M&L for providing cement concrete type B-1, 1:2:4 (20 mm graded aggregate ) as in floor, kerbs / padding or similar work or mud stops rounded or chamfered on edges.

Taking down cement plaster of any description on brick or stone masonry wall , etc including racking out joints, hacking for key, scrubbing down with water etc, all as specified.

M&L for Rendering 15 mm thick in cement and sand mortar 1:4 on brick work or cement concrete surfaces of walls including finishing the surface even and smooth with using extra cement and mixing only integral water proofing compound as per manufacturer instruction complete all as specified and as directed by Engineer-in-Charge. Note:- WPC will be measured and paid separately.

M&L for Rendering 10 mm thick in cement and sand mortar 1:6 on brick work or cement concrete wall surfaces including finishing the surface even and smooth without using extra cement complete all as specified.

M&L for Rendering 5 mm thick in cement and sand mortar 1:3 on concrete surfaces of ceiling, including finishing the surface even and smooth without using extra cement complete all as specified.

Supply only integral water proofing compound powder ISI marked

M&L for preparing new plastered surfaces of ceiling and applying three coats white wash all as specified and directed.

M&L for Preparation of newly plastered surfaces of walls and applying two coat of oil bound distemper over one coat of primer including 2 mm thick cement base wall care putty complete.

M&L for Preparation of newly plastered surfaces of walls and applying two coat of cement base paint over one coat of primer complete.

M&L for preparation of new plastered surface of walls and applying two coats exterior emulsion weather coat paint of make Apex (Asian Paint) / Weather coat (Berger) / Excel Top Guard (Nerolac) over one coat primer complete all as specified and directed.

M&L for Preparation of new wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying two coat of synthetic enamel paint over a coat of pink primer all as specified.

M&L for Preparation of new steel and iron based surfaces of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified.

M&L for complete removal of existing treatment from RCC / STONE / /BRICK / PLASTER and other surfaces of walls in any description etc by scrapping with mechanical sander (having mechanical vacuum mechanism) with sanding pad of appropriate grit to make surface clean, including preparation of scraped surface by removing all depression by applying 1 mm thick cement base wall care putty and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm / litre and UV resistance as per IS 15489-2004, alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additive @1.43 litre/10 sqm and including priming coat of exterior primer applied @.90 litre/10 sqm over putty surfaces complete all as specified including necessary scaffolding arrangement and as directed by engineer in charge. NOTE: (i) Primer and emulsion to be carried out through air less spray machine (Mechanical means). (ii) Work to be carried out for up to 15 meter high building, contractor shall make necessary arrangement for scaffolding and safety arrangement for there workers

M&L for Preparation of old painted wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying one coat of synthetic enamel paint all as specified.

M&L for Preparation of old decorated surfaces of walls by brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of cement base paint of any tint / shade all as specified.

M&L for Preparation of old decorated surfaces of walls by brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of distemper oil emulsion of any tint / shade all as specified.

M&L for Preparation of old decorated surfaces of ceiling by brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of distemper oil emulsion of any tint / shade all as specified.

M&L for Preparation of old painted surfaces of steel of any description, not otherwise described over 10 cm width or girth, and applying one coat of synthetic enamel paint all as specified.

M&L for complete removal of existing treatment of walls and applying two coats of distemper oil emulsion over a coat primer including applying 2 mm thick cement base wall putty complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F rolled mild steel section as in main and cross beams, hip and jack rafters; purlin where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410-W (Gde-E-250 quality A).

S&F Pre- painted galvalume aluminium zinc coating GI based corrugated/plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing roof sheet complete

M&L for 75 mm thick PCC type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection laid in bays n. exc. 2 sqm each, finishing the surface of concrete topping even & fair, without using extra cement filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand (all by weight) complete all as specified and as directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling / stone slab of any description including cement mortar bedding and rubbish off the premises complete.

M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including half round moulding of exposed edge, laid over and including 15 mm thick screed in cement mortar 1:4 complete all as specified

M&L for Coloured Glazed ceramic tiles of size 300 mm x 450 mm x 7 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match with tiles laid over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

M&L for 18-20 mm thick machine cut Kota stone slab flooring with marble stone strips / slab / tiles as per design approved, over and including cement screed bed 20 mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified.

M&L for 18-20 mm thick machine cut Kota stone slab as in skirting / riser over and including cement screed bed 10 mm thick in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing complete

M&L for non skid ceramic tiles of 7-8 mm (square or rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles, laid over and including 15 mm thick screed in CM 1:6

M&L Vitrified ceramic tiles 10mm thick (square/rectangular) Coloured polished tiles, area of each tile n.exc 0.38 sq m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement and pigment to match laid over and including 15 mm thick screeding in CM 1:6

M & L for precast cement concrete Type B0,1:2:4 (using 12.5mm graded stone aggregates) louvres and jallies, 25mm thick (measured solid), including all mouldings and set in CM 1:4 complete all as specified and directed

S&F in repair 3 mm thick aluminium composite panel with necessary jointing accessories fixed to aluminium joinery complete all as specified and directed by EIC

S&F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed including dismantling and removal of existing paver blocks

M&L for Vitrified porcelain body truncated domes type tiles suitable for exterior or interior application, frost, heat and weather proof of approved pattern and design / coloured of size 300 mm x 300 mm x 12 mm thick, set, jointed in neat cement slurry & pointed in coloured cement, as in floors / path / ramp laid over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed. Make:- Johnson Endura tactile series or equivalent of make mention under list of make.

M&L for Chequered cement concrete coloured tiles 30 cm x 30 cm x 20 mm thick with coloured cement and pigment , set, jointed and pointed in neat cement slurry laid over and including 15 mm thick screed bed in CM 1:4 as in floors complete all as specified.

M&L for 75 mm thick cement concrete 1:4:8, type D-2,(using 40 mm graded stone aggregate) as in Sub base for path / flooring complete all as specified and as directed.

M&L for Hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Taking down chowkhats or frames with shutters (wooden / aluminium / iron) (without taking off shutters from the frames) not exc 1.50 Sqm each complete all as specified and as directed by the Engineer-in-Charge

Taking down chowkhats or frames with shutters (wooden / aluminium / iron) (without taking off shutters from the frames) exc 1.50 Sqm but n exc 4.00 Sqm each complete all as specified and as directed by the Engineer-in-Charge.

Taking down shutters of any description n exc 1 Sqm each complete all as specified.

Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each complete all as specified.

Mild steel work Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 as in small articles like angle iron framing work for manhole, rungs/steps in man hole

M&L for treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc. area n exc 0.1 sq. m each with tar or coal tar black paint complete.

S&F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2020 as specified and as directed by Engineer-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2020 as specified and as directed by Engineer-in-Charge.

S&F plain solid, straight chowkhats & frames of 2nd class HW Hollock wrought, framed rebated on the solid, rounded or chamfered, put together with glue & pinned at joints including preparation of back of chowkhat & treated with coal tar complete all as specified

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

M&L 30mm thick 2nd class hard wood Glazed and Skelton shutter, open rebated and prepared to receive glass, gauge etc. divided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.23(b) complete all as specified.

S&F 300 mm size aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed by Engineer-in-Charge.

S&F 150 mm size aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed by Engineer-in-Charge.

S&F 250 mm size aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed by Engineer-in-Charge.

S&F 100 mm size aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed by Engineer-in-Charge.

S&F 100 mm size Butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed by Engineer-in-Charge.

S&F 75 mm size Butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed by Engineer-in-Charge.

S&F 125 mm size aluminium anodised handles, fabricated type, complete all as specified and directed by Engineer-in-Charge.

S&F in repair 300 mm size aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed by Engineer-in-Charge.

S&F in repair 150 mm size aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed by Engineer-in-Charge.

S&F in repair 250 mm size aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed by Engineer-in-Charge.

S&F in repair 100 mm size aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed by Engineer-in-Charge.

S&F in repair 100 mm size Butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed by Engineer-in-Charge.

S&F in repair 75 mm size Butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed by Engineer-in-Charge.

S&F in repair 125 mm size aluminium anodised handles, fabricated type, complete all as specified and directed by Engineer-in-Charge.

S&F 150 mm size floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in steel window clips and wooden beading in wooden joinery complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in steel window clips and wooden beading in wooden joinery complete all as specified and directed.

S & F in repair 150 mm floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring

Hacking out old broken glass, any thickness, size, quality, or description, from frame n.exc 1.5 Sqm each pane

S&F 3.0 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beading / aluminium beading area n.exc 0.5 Sqm each pane.

S&F 3.0 mm thick figured glass ordinary quality and glazing with oil putty / wooden beading / aluminium beading area n.exc 0.5 Sqm each pane

S&F 4.8 mm thick sheet glass ordinary quality and glazing fixed to aluminium joinery with and including neoprene beading area of each pane exc 0.5 Sqm to 1 sqm.

S&F powder coated Aluminium alloy sections sliding windows shutters with frames comprising Series -C (20mm), 3 track sliding shutters duly fitted with neoprene beading, glazing clips, locking device, heat absorbing glass 4.8 mm nominal thickness in 2 shutters and 0.46 mm dia SS wire mesh in one shutter complete all as specified and as directed.

S&F powder coated aluminium sections ( conforming to IS) door with frame of size 100mm x 44.45 mm wide, fabricated with 2 mm thick section, double / single leaf shutter with 44.45 mm wide fabricated with 2mm thick section having vertical and top rail 83.50mm, bottom rail and middle rail 115 mm and including necessary jointing cleats, screws, neoprene rubber beading, PVC packing, tinted glass panes 4.8 mm nominal thickness, 100 mm butt hinges (3 Nos in each panel), 150mm tower bolt (1 in each panel), locking arrangements with 100 mortice lock complete all as specified and as directed.

S&F in repair aluminium partition fabricated with anodised aluminium section for side & top rail of size 101 mm x 44 mm x 2.5 mm for middle rail (horizontal / vertical) of size 101 mm x 44 mm x 2.5 mm, partly glazed with 4 mm thick glass and partly panelled with pre-laminated particle board both side laminated at bottom panel including glazing clip, rubber bead, fixed in position as standard practice complete all as directed by the Engineer-in-Charge.

S&F in repair aluminium partition fabricated with anodised aluminium section for side & top rail of size 101 mm x 44 mm x 2.5 mm for middle rail (horizontal / vertical) of size 101 mm x 44 mm x 2.5 mm, partly glazed with 4 mm thick glass and partly panelled with 3 mm thick aluminium composite panel at bottom panel including glazing clip, rubber bead, fixed in position as standard practice complete all as directed by the Engineer-in-Charge.

M K Engineers and Contractors

DEVANSHI INFRATECH

B.S.S.ENTERPRISES

M/S SHIVA CONSTRUCTION

AJAY CONSTRUCTION

m/s raghubar dayal

M/S Reliance Construction

M/s Arora Trading Co