Loading…
Loading…
Tender Value
₹2.2 Cr
EMD Value
₹2.6 L
Closing Date
2 Jan 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
GSUBKN
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Any RRI/PI/EI/MACLS Supply, Installation Testing, Commissioning Signalling work OR Any RRI/PI/EI/MACLS Alterations Signalling work OR Any CTC/TMS Work.
4 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
If the bidder fails to submit copy of audited balance sheet alongwith the offer then contractual turnover of that year will be treated as NIL
S&T work in c/w provision of one additional spurs beside Gypsum siding along with freight terminal infrastructural facilities at Anupgarh goods shed of Bikaner division.
SNT-GS-BKN-2025-26-05R~NWR
SNT-GS-BKN-2025-26-05R
Open
Works - General
12 Months
Bikaner, Rajasthan
₹0
₹2.6 L
2 Jan 2026
9 Dec 2025
19 Dec 2025
149 items across 14 schedules · ₹1,49,20,386.79 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| manufacture and supply of Hot Architecture Electronic (EI) system complete as per specification No. Ver. 2 or latest, as requirement & tentative Signalling Plans & Diagrams. Interlocking (EI) system mainly g of Central Processing Interface Equipment/Relays requirements, Dual operator Grade VDU panel (42" LED) with (Hot stand-by dual VDU system online and other standby mode), All Interfacing for EI, interconnecting Jumper wires, Industrial grade Terminals (32'' LED with UPS hr back up), required power converters for EI equipments, EI equipments and Relay screw less disconnecting terminals, fixture mounting and accessories necessary EI system functional as per signaling plan. The tenderer complete details of cards/ sub-modules connectors etc. for Supply of 10% Essential EI equipments subject to one of each type mainly processor, cards/ module, relay etc. Item wise detailed with unit and quantity to be separate annexure. (THIS BE USED ONLY FOR WORK IN EXISTING EI) RDSO Inspection charges: Railways Payment terms:100% | — | — | — | — | |
| 1 | with routes less than 100(Per be read as Per Vital Bit of | Per Unit | 60.00 | 87,987.65 | 52,79,259 |
| 2 | wiring, programming, testing commissioning of EI equipment per supply item in item no. 1.7 Chapter 1 of this SOR including from Consignee's depot to works and materials for wiring, testing and grouting, cutting of floors, of the same, re-plastering, masonry works, fixing/ laying of insulated ladders/ cable trays/ RCC/GI pipes termination of cables with lugs/ painting,/ lettering are to be done by the contractor for the supplied vide item no. 7 of SOR. This also covers the built in EI Data loggers of all to monitor the system to any where desired by Engineer- (THIS ITEM SHALL BE USED ALTERTION WORK IN EXISTING Installation shall be comply to Technical Advisory Note No dtd. 28.08.2014. wiring, programming, testing of Operator VDU in with Redundancy. Any Equipments/cards/Modules required for with Redundancy shall be Installed by the Contractor. also includes supply of Two composite computer & printer work station table) and one make operator chair model Termination of indoor/ PIJF room on relays, tag blocks, per approved wiring diagram alterations/ modifications as site. Soldering to be done at termination. Dressing/ lacing be done neatly with help of / plastic self lock strip of size. The tools/ equipments/ simulation boards required for be supplied / fabricated by This includes replacement of cards/ LEDs/ equipments going during testing. Necessary power with required capacity sockets, surge & lightning boxes shall be supplied and the contractor. 230V supply arranged by Railways. In case required to be extended, room / relay room then same extended by the contractor with materials such as 1X16 sq mm lugs, RCC/GI pipes, ladders etc. After ST/LT testing, Acceptance Tests (FAT) & Square system should be fault free to Railways, otherwise necessary action can be taken by Inspection: Consignee charges: None Payment terms: commissioning. | Job | 1.00 | 5,42,784.93 | 5,42,784.93 |
| 3 | work station note book as per Specifications . It also includes Laser Printer (Only branded). should be capable of the system in case of any yard interlocking in future. Specifications should be the tender document by authority. Inspection: Inspection charges: None 100% after supply | Station | 2.00 | 86,892.73 | 1,73,785.46 |
| 4 | Technician/ Jr. Engineer for Commissioning, Testing, Troubleshooting of EI system. of training material/ course be given to each participant). Consignee Inspection charges: terms: 100% after | Man-Days | 30.00 | 1,106.23 | 33,186.9 |
| 5 | preparation & supply of drawings print copies and original AUTO CAD FORMAT for Interlocking at each station. completion of the work, the drawings incorporating details are to be supplied as Specifications given in document (upto 6 Line). The specifications are as per 1.13 of SOR. Inspection: Inspection charges: None 100% after execution | Station | 1.00 | 1,75,967.35 | 1,75,967.35 |
| 6 | embedded fanless PC based terminal as per RDSO spec. RDSO/SPN/192/2019 Ver. 2 or latest & - STS/E/TAN/3007 version 1 . The size of VDU shall be inch. Note: (i) Technical shall be mentioned in the (ii) One revolving chair supplied with control terminal. RDSO Inspection charges: Railways Payment terms:100% | Numbers | 2.00 | 4,09,839.2 | 8,19,678.4 |
| 7 | wiring, testing and of embedded fanless PC control terminal as per RDSO RDSO/SPN/192/2019 Ver. 2 or TAN No. - STS/E/TAN/3007 dated:02.11.12 . Note: (i) requirements shall be in the tender document by authority. Inspection: Inspection charges: None terms:100% after | Numbers | 2.00 | 1,02,459.8 | 2,04,919.6 |
| 8 | embedded fanless PC based terminal as per RDSO spec. RDSO/SPN/192/2019 Ver. 2 or latest & - STS/E/TAN/3007 version 1 . The size of VDU shall be inch. Note: (i) Technical shall be mentioned in the by tendering authority. of suitable size alongwith chair should be supplied with terminal. Inspection: RDSO charges: Borne by Railways terms:100% after supply | Numbers | 1.00 | 3,85,774.44 | 3,85,774.44 |
| 9 | wiring, testing and of embedded fanless PC Maintenance terminal as per RDSO RDSO/SPN/192/2019 Ver. 2 or TAN No. - STS/E/TAN/3007 dated:02.11.12 . Note: (i) requirements shall be in the tender document. Consignee Inspection charges: Payment terms:100% after | Numbers | 1.00 | 96,443.61 | 96,443.61 |
| 10 | of SWR literature in english associated mid-section gate with all corrections as SWRD & approved SIP. For technical corrections, editing, correction etc. are to be and one rough print to be railways for approval before required for final processing sanction. This also includes of maintenance cards in provided by Rly. Inspection: Inspection charges: None terms:100% after execution. | Station | 1.00 | 3,598.62 | 3,598.62 |
| 11 | Station Working Rules from hindi and framing out in DIGLOT similar software )as per extant The required SWR in english by the contractor and has separately in item no. 1.21 1 of this SOR. Inspection: Inspection charges: None terms:100% after execution. | Station | 1.00 | 4,478.18 | 4,478.18 |
| 12 | photocopies & binding of the SWR English/hindi/Diglot form as practice. Inspection: Inspection charges: None terms:100% after execution. | Set | 6.00 | 178.52 | 1,071.12 |
| 13 | in existing relay room includes supply of PVC insulated Railway signalling cable of (1/0.6) sqmm RDSO Spec.No.IRS/S-76/89 latest) for wiring between and SM's/Panel room & Relay in SM office for block working. includes supply of PVC insulated of multi strand 16/.2 mm, all colours as per RDSO Specn.No.IRS-S-76/89(Amnd.2 or latest). will include bringing all the from power room to bus bars on relay racks by sqmm copper flexible wire as of engineer incharge. This wiring between control panel room if required. All wiring will per standard practice of North Railway with neat dressing & The item includes supply & block, fuse with bases(G- Type) and all other related required for complete indoor relay room. Inspection: Inspection charges: None terms:100% after | Per Relay | 50.00 | 524.1 | 26,205 |
| Schedule total | ₹77,47,152.61 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .