CWE/D-23/2023-24

Amount

Taking down cement plaster on brick or stone walls/ etc including raking out joints, hacking for key, scrubing down with water all as specified and directed by engnr-in-charge.

M&L for rendering 10mm thick Ready Mix Plaster in cement mortar (1:6)mixed with PD proof 101 LW(+) of Dr fixit or equvalant integral WP admixer @200 ml/bag of cement over two coats of super latex 302 of Dr fixit or equ. in the ratio 1:4: 7 (one part super latex 302, 4 part water and 7 part cement ) @ 1.50 Kg of homogenious mixture per Sqm in two coats on brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and directed. Note- PD proof 101 LW(+) and super latex 302 shall be measured and paid seperately

M&L for rendering 15mm thick Ready Mix Plaster in cement mortar (1:4) mixed with PD proof 101 LW(+) of Dr fixit or equvalant integral WP admixer @200 ml/bag of cement over two coats of super latex 302 of Dr fixit or equ. in the ratio 1:4: 7 (one part super latex 302, 4 part water and 7 part cement ) @ 1.50 Kg of homogenious mixture per Sqm in two coats on brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and directed. Note- PD proof 101 LW(+) and super latex 302 shall be measured and paid seperately

M&L for rendering 5 mm thick Ready Mix Plaster on ceiling concrete surface, finished even and fair without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of white chalk whiting, complete all as specified and directed.

M&L preparation of newly plastered ceiling surfaces of any description and apply three coats of white wash all as directed and specified.

M&L preparing of newly plastered surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/L and UV resistance as per IS 15489:2004, Alkali and fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43l/10sqm and icluding priming coat of exterior primer applied @0.90L/!0sqm over new surfaces all as specified and directed.

M&L preparing of old plastered surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/L and UV resistance as per IS 15489:2004, Alkali and fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43l/10sqm all as specified and directed.

M&L Preparing plastered or unplastered old decorated surfaces of walls and applying Two coats of oil bound distemper all as specified .

M&L for preparation of old decorated previously treated surfaces of ceiling by brooming down scrapping down smoke and efflorescent etc. complete and applying one coat of white wash complete all as specified and directed.

Material and labour preparation of old/previously treated wooden surfaces of any description over 10cm width or girth and apply one coats of synthetic enamel paint all as directed and specified.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets/ Metal/Aluminium ceiling frame complete all as specified and directed

M/L exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 x 600mm grid and 6mm thick complete all as specified and directed by Engr-in-Charge. (Note : frame work for ceiling shall be measured and paid seperately)

M&L Anodised aluminium snap grid frame work of size 605x605mm for flase ceiling including hanger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slab/truss by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and hinging arrangement and making good at surface all as specified and directed

Taking down chowkhats or frames with shutters(without taking off shutters from the frames) not exceeding 1.5 sqm and remove from site as directed and specified.

All as per item above here-in-before but exceeding 1.5. sqm but n.exc 4 sqm each and -ditto- complete

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each and refixing in same position complete all as specified and directed.

Supply and fix for 35 mm thick 2nd class hardwood plain, framed, panelled door shutters (any numberer of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats.

S&F powder coated (of any colour, thickness of coating not less than 50 micron) Aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, aluminium snap beading screws etc complete all as specified.

S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.

S&F Multicolour glazing of tinted glass 5.5mm thick fixed in any type of door window shutters and partitions etc with PVC/neoprene gasket etc complete all as per specified and directted by Engr-in-charge.

S&F 150mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed.

S&F aluminium (extruded section) body door closer hydraulically regulated designation no. 1 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80kg anf fixed all as specified and directed.

S&F, 4 mm thk sheet ordinary quality and galzing with oil putty/wooden/aluminium beads in square n.exc 0.5 sqm each complete all as specified and directed.

S & F aluminium powder coated three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber beading joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below :-- (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 21447) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 21446) (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.50 (Section No 21455) (d) Interlock Section of Shutter shall be be of size 18.00 x 40.00 x 1.50 (Section No 21454) (e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.50 (Section No 20844) Note:-(i) Section Number given above are of make Jindal, Contractor may use similar section of other make mention in Appx .

S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixedas diected and specified.

S&F 100 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

S & F Aluminium, anodised, barrel tower bolts 150mm long of extruded section and fixed as diected and specified..

Supply and fix Aluminium handles, cast type, anodised size of handle 150mm as diected and specified.

M&L for Cleaning all the dust and loose material by brush/blower/Grinder including removing of vegetation/plantation from the surface. M&L for preparation of roof top surfaces, providing and applying single component elastic cold applied polyurethane modified acrylic roofing system, co elastic technology (CET) based on modified polyurethane and fully fibre reinforced, having Sun Reflectivity index (SR) of 109 on top of concrete roof surfaces. All cracks up to 3 mm at corner joints, channel and parapets should be treated with crack seal. Applying three coats including one coat of primer of ShaliUrethane BTD/ Sikalastic 560/ smart care damp proof-ultra having coverage @ min 0.75kg/m2 and dilution up to 10% and laying reinforced fiber net and applying two coats (without dilution) of shaliUrethane BTD/Sikalastic 560/smart care damp proof ultra @ total consumption 2 kg/m2 in two coats for maintaining minimum dry film thickness 1.5mm and elongation at break of free film of approx 350%. The materials shall be applied with brush or roller, complete in all respect as per the direction of Engineer-in-charge/Consultant (Note :6 Hrs interval between two coat will be maintained). All auxiliary and accessories involved during application should be supplied by single manufacturer as a part of system.Make: STP/Sika/Asian paint or equivalent as approved by GE.

Note:- Application of water proofing treatment will be done by Authorised Applicator only. (i) The water proofing treatment shall be carried out by the manufacturer or their authorized applicators duly approved by GE in writing. (ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years. However, contractor may deposit the FDR of same amount in favour of GE. If contractor fail to rectify the defect pointed out during this period in writing, the defect shall be got rectified at contractor' risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. The contractor's quoted rates for this item shall deemed to be inclusive of this aspect.

M&L for 15 mm thick cement plaster over the concrete / brick roof surfaces in cement mortar 1:4 mixed with liquid water proofing compound @ 200ml per bag Cement (liquid type) , surface finished even and smooth without using extra cement all as specified and directed. Note :- Water proofing additive shall be measured and paid separately.

Taking down 15mm bore steel tubing and connections including cleaning for re-fixing or removal to store as directed and specified.

Taking down 20mm bore steel tubing and connections including cleaning for re-fixing or removal to store as directed and specified.

Supply and Laying of CPVC pipes 20mm outer diameter SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engineer in charge.

Supply and Laying of CPVC pipes 25mm outer diameter SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engineer in charge.

S & F in repair bib taps cast copper alloy fancy type C.P 15mm bore with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed all as directed and specified.

Supply and fix PVC connections 15mm bore with PTMT nuts with washers of length 600 mm as diected and specified..

Supply & Fix grating square 150mm size of PTMT all as directed and specified

S & F in repair angular stop cock, chromium plated, cast copper alloy C.P 15mm bore screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union all as directed and specified.

S&F in repairs stainless steel curtain rods fancy type size, and pattern as approved 20 mm dia with gold colour knobs at both ends including sliding system and arrangment for sheer curtain complete all as directed (Make -Mac/Vista

S & F in repair vitreous china wash hand basin of size 550mm x 450mm, incl fixing to wall with brackets etc complete all as directed and specified.

S & F in repair Pillar taps, cast copper alloy fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and directed.

M&L Waste fitting brass CP in repair for WHB and urinal basins etc with long screwed shanks and fly nut flange complete and fixed.

Demolition of cement concrete of any description and in any position (unreinforced) in ground floors below or above ground level n.exc 15 cm thick all as directed and specified.

Material and labour for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate, 75mm thick as in plinth protection/pavment and the like, finish the surfaces even and fair without using extra cement. It should be laid in alternate bays, each bay n.exc 3m length with joint to be filled with bituminous mastic filling comprising a mixture of Part of heated hot blown bitumen 85/25 penetration and two parts of heated sand all as specifed and directed.

M&L glazed ceramic coloured tiles size 450x300x7mm/350x250xmm thick in walls etc set and jointed in neat cement slurry and pointed in colour cement laid over 10mm thick rendering in CM (1:4) including dismantling complete all as specified and directed.

M&L non skid ceramic tiles colored tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM (1:6) including dismantling complete all as specified and directed.

M&L Vitrified ceramic tiles 10 mm thick square/rectangular light shade texture polished,area of each tiles Not exceeding 0.36 sqm,in floor etcb set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the colour of the tile including 15mm thick cement mortar screed bed in CM (1:6) including dismantling complete all as specified and directed.

M & L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F factory made solid panel PVC door shuter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails & MS frame shall be covered with heat moulded plain colour PVC `C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement of stiles and plain colour PVC sheets for top rail,lock rail & bottom rail, on either side & as gap insert for top rail & bottom rail & panelling of plain colour PVC sheet to be fitted in the MS frame welded/Sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per complete all as specified.

S&F solid door frame 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete.all as specified and directed.

Dismantling Water tanks of capacity exceeding 500L but not exceeding 1000L complete all as specified & directed.

S&F PVC water tanks 1000 ltr cap rotational moulded polyethylene tripple layered water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.

S&F ball brass valve high pressure with polythene float and fly nut complete screwed for Iron pipe 20mm bore

Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified and directed.

PCC 1:4:8 type D-2 as in sub base of flooring 75 mm thick all as specified and directed by Engr-In-Charge.

M & L for sand filling 50mm thick under floors or in foundations including watering as required all as specified and directed by Engr-In-Charge.

M & L for machine pressed precast concrete interlocking payer block any shape and size confirming to IS -15658-2006 of 60 mm thickness (M-35 Grade) with grey cement and no pigment all as specified and directed by Engr-In-Charge.

M&L cement concrete type B0 (1:2:4) using 12.5 mm graded aggregate as in coping, bed blocks, kneelers, apex stones, bed plates, kerbs including bending, weathering, slightly rounded or chamfered on edges complete all as specified and directed.

M&L for powder coated aluminium grill of powder coating of minimum 50 micron with aluminium mesh of sze 50x50mm with square tube solid 6mm thick including aluminium channel of size thickness of channel 1.5mm complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (padestal pattern) white colour closed pattern including soft closing black seat cover all as specified and directed.

Supply only PVC low level flushing cistern 10 ltrs capacity incl PVC float valves, PVC connection and out let pipes complete.

S&F in repair water closet squatting pan ``Orissa pattern`` 580 mmx440 mm, white with integral foot rests including fixing charges of flushing cistern, connection to trap, anti syphonage pipe and provn of lime concrete etc complete all as specified.

S & F in repair 20 mm dia brass CP towel rail 600mm long all as specified and directed by Engr in Charge

S & F in repairs CP health faucet hygienic spray (2in 1 facucet with 1.0M long tube) complete all as specified.

S& F in repair 15 mm dia Central hole basin Brass CP mixer formixing hot & cold water screwed down for iron pipe and fixed .

S&F in repairs 15 mm wall mixer , cast copper alloy , with capstan heads, chromium plated, screwed down high pressure , with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

Supply only PD proof 101 LW (+) of Dr Fixit or equivalent.

Supply only super latex 302 of Dr fixit or equivalent.

Providing and fixing Unitile® USF MEDG EB Raised Access Flooring System using Tile with Low Flange Width (LFW), flange width not exceeding 8mm & beam width not less than 19.50mm, with top performance finish of High Pressure Antistatic Laminate (HPL). Flange width not to exceed 9.50mm, with Edge Support Rigid Grid (ESRG) System able to take Concentrated Loads : 363 Kgs (800 lbf ), Ultimate Concentrated Load: 908 kgs (2000 lbf), Uniformly Distributed Load (UDL): 1650kg/m2 and Pedestal Axial Load: 22Kn., removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment, comprising of modular load bearing floor panels of size 600mm x 600mm, supported on G.I. rectangular stringer frame work and G.I. Pedestal etc. all complete, to achieve a Floor Finished Height (FFH) of 300mm a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 1.5 mm and 22 mm outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 2mm at the bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud for level adjustment, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawal plug. b) Stringers system in all steel construction hot dipped galvanized of rectangular size 590x16x29x0.80mm thick having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions

S&F 12 mm thick toughned glass Partition wall/ door shutters of any size including neccessary floor spring hydraulically regulated, otherside fixed on pivote. CP fiitings and fixtures, CP handles CP Locking arrangment, neccessary cuting & holes moulding and complete fixing arrangement for door and partition wall complete as specified and directed .

S&F glazing of tinted glass 5.5mm thick in uPVC window shutters and partitions etc with PVC/neoprene gasket etc Complete all as per specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust all as directed and specified.

S&F steel work in tubler trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade st-240 all as specified and direcred.

S&F Pre- painted galvalume corrugated aluminum zinc coating GI based steel sheet of approved profile of corrugation, 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed by Engr-in-Charge.

S&F Pre- painted galvalume aluminum zinc coating GI based steel sheet of approved profile of plain, 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed by Engr-in-Charge.

M&L for broken stone or boulders hardcore of gauge n. exc. 63 mm, deposited, spread and levelled in layers n. exc. 15cm thick, watered and rammed to a true surface.

M&L for 100mm thick cement concrete type D-2 1:4:8 (40mm graded agg) as in sub floor; complete all as specified and directed.

M&L 100 mm thick plain cement concrete 1:2:4 type B-1 ( using 20 mm graded stone aggregate) as in floors finished even and smooth using extra cement all as specified.

M & L for preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint ( Ist grade) over a coat of red oxide primer complete all as specified and directed.

Excavating in post holes (or similar holes) in hard/ dense each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete.

M&L for cement concrete 1:2:4 type B2 (using 20 mm graded crushed stone aggregate) as in foundations, filling and mass concrete.

M&L brick work with burnt clay bricks straight or curved on plan to any radius built in CM 1:6 all as specified.

Dismantling of old stone broken/cracked stone slabs in laid bedded and pointed in any morter complete all as specified and directed.

M & L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15 mm thick bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L 40 mm thick plain cement concrete 1:2:4 type B-1 ( using 20 mm graded stone aggregate) as in floors finished even and smooth using extra cement all as specified.

M & L for providing and fixing stainless steel (Grade 304) framed structure work made of hollow tubes, channels, plates etc in any size, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

Supply and Fixing of MBC polycorbonate outdoor Awnings whether Sun shed (Square off white or any colour) Size not less than 100 x 60 x 20 Centimeters , Seamless surface, no water leaking , looks sleek fixed on roof projection,Chajja and openings with complete suitable fixing arrangement and making good of distrubed wall surface including wall finishes complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light/fan/socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc including making good the disturbed surfaces to match with the existing complete

Taking down unserviceable main switches, DBs including MCBs, bus bars chambers etc from wall / existing main boards and removing from site complete

M&L for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC surface conduit of 20mm dia or higher, medium grade complete with all PVC conduit accessories, GI metal flush box of 1.60 mm thick suitable for modular/conventional switches/sockets/fan regulators with cover plates (modular/ conventional type as required), blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :-

One light point/ceiling/exhaust fan point/bell point/socket outlet on independent board controlled by one switch

One socket outlet 5 Amps controlled by one switch on same board

All as per above item no 96 but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 16 Amps socket outlet point on independent board with 2.5 Sqmm nominal cross sectional area copper conductor cable as continuous earth wire.

All as per above item No 96 but wiring with 4 sq mm PVC insulated multi-stranded copper conductor for industrial socket outlet 3 pin 16 / 20 Amps point and one single core 4 sq mm PVC insulated unsheathed copper cable as earth continuity conductor

S&F ding dong bell, AC, 230 volts, single pole complete

S&F lamp holder, 230 volt AC, PVC / Polycarbonate type with back plate suitable for batten fitting including 9 watt LED bulb , 6500 K complete all as specified & directed

S&F ceiling rose, 6 Amps, 250 volts, AC with three terminals and PVC / Polycarbonate insulated body of 50 x 25mm size complete

S&F modular switch 6/10 Amps, one way, one module 240 volts complete

S&F modular socket, 3 pin 6 Amps,240 volts, 2 module complete

S&F modular switch 16 A, 1 module,240 volts complete

S&F modular socket 6/16 A, 5 pin, 2 module, 240 volts complete

S&F modular Bell push 6 Amps, one module 240 volts complete

S&F modular fan regulator, step type, 120 W, humfree, AC, 230 volts, 2 module complete

S&F sheet metal enclosure with Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 'C' curve, 240 Volt complete

M&L in repair for two single core (submain) PVC insulated cable with 6 sqmm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20 mm dia or higher size, concealed in wall including all conduit and fixing accessories including cutting chases & making disturbed surfaces complete

S&F MCB DB, single pole and neutral with 200 Amps rated bus bar, 230 volts, glazed, double door type, IP-43, including connecting all connections of wire to MCBs with proper lugs & making good to the disturbed surface complete for the following no of way :-

S&F loadline distribution box 4 way, AC, TP & neutral metal enclosure, Glazed double dooor, 415 V, AC, IP-43, concealed type with suitable bus bar, neutral link, earth link suitable for MCCB 100/125 Amps as incomer and MCB SP as out going complete all as directed

S&F MCB DP/SPN,63 Amps, 240 Volts, AC of breaking capacity 10 KA, 'C' curve and connections by using suitable copper lugs complete.

S&F MCB SP, 240 Volts, AC, 6 to 32 amps, breaking capacity 10 KA, 'C' curve and connection by using suitable copper lugs complete

S&F MCCB 3 Pole, 125 amps,415 volt, AC, fixed type, with breaking capacity 16 KA suitable for load line DB & connection complete.

S&F in repair wall mounted LED batten with aluminium housing and integrated electronic drive 18/20 watt fixture 4 feet provided for efficient heat dissipation with polycorbonate diffuser and integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete

S&F in repair surface and wall mounted LED batten 10 watt 2 feet long extruded aluminium housing provided for efficient heat dessipation with polycarbonate diffusser and integrated electronic drive, pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete

S&F in repair wall mounting bracket decorative luminaire powder coated housing,SS finish fixture with opal glass diffuser suitable for GLS, B-22 lamp incl connection complete all as directed.

S&F in repair surface/ceiling mounted LED panel type of size 2ft x 2ft, 36W, 230V, 5700K complete with driver full window glarefree opal diffuser LED panel with CRCA powder coated white housing complete with all accessories required for connection and making good the disturbed ceiling complete.

S&F in repair of LED linear surface/ suspended fittings, extruded aluminium body with opal polycarbonate diffuser, 38 watt, 4 ft long, CCT 6000 K incl connection complete.

S&F in repair LED energy efficient flood light of 50 watt, 230 volt,anti glare diffuser ,IP-65 incl connection complete all as specified & directed complete .

S&F exhaust fan 300 mm sweep, 230V, AC, steel body with louver shutter etc complete and connection from ceiling rose to fan terminal incl cutting of hole at wall for required size and making good disturbed surface .

S&F ceiling fan complete with three blades,down rod,accessories 230 V, 1200 mm sweep, min air delivery 210 CFM, BEE 5 star rated with brushless direct current motor & old /unsv fan to be deposited in MES store complete

M&L for earthing with Galvanised Steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using GI wire of size 4mm dia as earthing lead (upto the body of the equipment) by means of GI bolts, nuts, check nuts and washers and thimbles and protected by light grade 40mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 5 of SSR 1991(Part-I) complete

QUALITY CONSTRUCTIONS CO

VED PRAKASH ARORA

The new hut furnitures

POONAM ENTERPRISES

S GOURAV PRAKASH ENTERPRISES

BEHAL TRADERS

M/s KUMAR BUILDERS

Mohit Infratech