PROVN OF 02 X TOILET BATHROOM NEAR BLDG NO P-568 (CSD) OF 18 MED REGT UNDER AGE B/R-I AND AGE E/M-I OF GE (NORTH) MEERUT CANTT

Amount

Surface excavation n.exc. 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.

Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 metre in depth for foundation etc and for manholes etc n.exc. 10 Sqm on plan and n.exc. 1.5 metre depth and getting out in soft/loose soil complete all as specified and directed.

Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick as in soft/loose soil complete all as specified and directed.

M&L for treating the top surface of filled earth at the rate of 7.50 litres of emulsion per square metre of surface complete all as specified and directed.

M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured) complete all as specified and directed.

M&L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L for approved soil filling under the floor, spreading and levelling in layers n.exc. 25cm thick, well ramming including watering as required complete all as specified and directed.

M&L for hardcore of broken bricks gauges n.exc. 63mm, deposited spread and leveled in layers n.exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed.

Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Use and waste of Form work of sides of pillars, posts, struts, piers, columns etc square or rectangular or polygonal rough surfaces of concrete complete all as specified and directed.

M&L for Form work to sides and soffits of beams lintels etc finished rough complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick flat fair finished surfaces of concrete complete all as specified and directed.

M&L for form work to the edge of concrete flat n. exc 200 mm thick complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required as in stirrups complete all as specified and directed.

M&L for RCC M25 using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M & L for RCC M25 using 20 mm graded stone aggregate as in Columns, pillars etc complete all as specified and directed.

M & L for RCC M25 using 20 mm graded stone aggregate as in beams, lintels over 1.5 m span etc complete all as specified and directed.

M&L for RCC M 25 type A-1 using 20 mm graded stone aggregate for roof slabs supported on walls, beams and the like complete all as specified and directed.

M&L for brick work with fly ash bricks in CM 1;6 brick straight or curved on plain exeeding 6m mean radius complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M & L for 10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.

M&L for Rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified and directed.

M & L for applying 15 mm thick rendering using ready mix plaster bags in CM 1:4 on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @ 200ml per cement bag or as per manufacturer instructions, complete all as specified and directed : Note:- Water proofing compound shall be measured and paid sepratly

M&L for 75 mm thick cement concrete 1:3:6 type C-2 using (40 mm graded stone agg) as in sub base complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match 15mm thick screed bed in CM 1:6 complete all as specified and directed

M&L for glazed coloured ceramic tiles of size 450x300x7-8mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work over and including 10mm thick rendering in CM 1:4 complete all as specified & directed.

M&L for 75mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in path /plinth protection , finish even & smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls etc and applying two coats of cement base paint over a coat of primer using roller complete all as specified & directed.

M&L for preparation of new plastered surfaces of walls with 1.00mm thick Birla /JK wall care putty and applying two coats of Oil bound distemper using roller to match the existing surfaces as required, complete all as specified & directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified & directed.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregates) as in padding on roof finished even and fair without using extra cement all as specified and directed.

M&L for cleaning of plastered /concrete surfaces and applying priming coat using bituminous primer @ 0.30 Kg/Sqm. followed by evenly a tack coat @ 1.20 Kg/Sqm. using with 85/25 grade bitumen, over laid with 3mm thick APP modified polymeric water proofing membrane with non woven polyester reinforced of weight not less than 3.6 Kg/Sqm. unrolled and bonded to substance with side and end laps 75mm and 100mm as per manufacturer’s instructions and finished top of APP water proofing polymeric membrane with a coat of hot blown industrial bitumen 85/25 grade @ 1.20 Kg/Sqm and finally finished with a coat of bituminous aluminium paint @ 0.20 Kg/Sqm complete all as specified and directed.

S&F Flat iron hold fast 25mm x 6mm welded to angle iron door frame complete all as specified and directed.

S&F Mild steel angle iron door frame 40mmx40mmx6mm conforming to Fe 410-0 incl 12mm dia deformed bars for strengthing at bottom of chowkhats incl cutting floor at bottom to accommodated strengthing bars & making good the floor in PCC 1:2:4 type B-0 to match the existing floor complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 156 of SSR 2010 (Part-II) complete all as specified and directed.

S&F 125mm size aluminium alloy handles cast type anodized complete all as specified & directed.

S&F aluminium tower bolts 150mm long, of extruded section complete all as specified and directed.

M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

S&F steel C.P. grating 100/125 mm dia as reqd at site complete all as specified and directed.

S&F for 110 mm bore PVC floor traps plain with grating and 300 mm long out let including jointing with cement concrete type B -1 1:2:4 complete all as specified & directed.

S&F PVC bends 110mm bore, any radius complete all as specified & directed.

S&F steel windows or ventilators fixed type, complete all as specified & directed.

S&F mild steel framed work such as grills, gratings guard bar etc with ends of bars shouldered and/ or riveted etc complete all as specified and directed.

S&F 20mm Gun -metal,globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F bib taps cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore, complete all as specified & directed.

S&F in repairs vitreous china wash hand basin, white, flat back of size 550x400mm (excluding taps, waste chain and plug and porcelain stopper) but including brackets suitable for 15mm dia pipe complete all as specified & directed.

S&F angular valve, 15 mm dia, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down, high pressure screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified & directed.

S&F rotational moulded polyethylene water storage tanks 500 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including dismantling existing water tanks complete all as specified & directed.

S&F in repairs PVC low level flushing cistern of 9-10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified & directed.

S&F 15mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed.

S&F 20 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed.

S&F 3mm thick sheet glass, pin headed, and glazing with oil putty/beading in square not exceeding 0.50sqm each pane complete all as specified & directed.

S&F galvanized mild steel wire cloth with 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed.

S&F butt hinges, 100 mm long of stainless steel, complete all as specified & directed.

S&F in PVC connections of 450mm long of PRYAG Make suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

S&F PVC ball valves, high pressure with polyethylene float and fly nut complete screwed for iron pipe 20mm bore complete all as specified & directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (flushing cistern and flush pipe) fixed with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed.

S&F in repairs white plastic seat cover for W.C.(E.T.) white including M.S. CP or aluminium hinging device complete all as specified and directed.

S&F pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, complete all as specified & directed.

S&F PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F Tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repairs chromium plated hand shower with 1.00 mtr flexible pipe for 15mm bore with fittings, complete all as specified and directed.

M&L for Concrete bed to drain pipes 150mm, including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC(1:4:8) Type D-2 complete all as specified and directed.

M&L for Slat-glazed stoneware drain pipes 150 mm dia laid in trenches and jointed complete all as specified and directed.

M&L for rendring 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and directed.

M&L for PCC(1:3:6) type C1 as in benching to man hole complete all as specified and directed.

M&L for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, sheathed, copper conductor cable in and including PVC concealed conduit of not less than 20mm dia complete with all accessories/fittings, brass screws, washer etc, including modular boxes, modular plates suitable for fixing modular switches/sockets and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, sheathed and connected to common earth and earth duly complete all as specified and directed for the followings :-

All as described ser item no 73.00 here-in-before but one tube light/Bulb/ ceiling fan/ exhaust fan/ security light point controlled by one, one way switch 05 / 06 Amps.

All as described ser item no 73.00 here-in-before One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as described ser item no 73.00 here-in-before One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as described ser item no 75.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board.

S&F Modular Switch, 1 module, 6A, AC, 240V, one way ISI Marked complete all as specified and directed

S&F Modular Socket, 2 module, 6A, 2/3 pin combined, AC, 240V, ISI Marked complete all as specified and directed

S&F Modular Socket, 2 module, 6A / 16A, 2/3 pin combined, AC, 240V, ISI Marked complete all as specified and directed

S&F Modular Switch, 1 module, 16A, AC, 240V, one way ISI Marked complete all as specified and directed

S&F of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified and directed

S&F LED tube light fitting T/5 surface mounting poly carbonate 240 volts 20 watts, 6500K complete all as specified & directed.

S&F LED light fitting mirror type with high output diffuser 2 feet,10 watt 220V, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copeer conductor cable of suitable size complete all as specified and directed

M&L for Building security light fitting 1 x 35 LED type, drawn through and including GI bracket of size 25 mm dia bore light grade 1.4 mtr long, bend to shape including MS clamps made out of flat iron of size 32 x 4 mm - 02 Nos and necessary nuts, bolts, washer as required complete all as specified and directed.

S&F Exhaust fan PVC body AC single phase 230/240V size 250 mm sweep with blades, and louvers complete all as specified and directed

S&F sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 ,IK08 protection with metal double door and flush to wall including all cutting / chases on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as specified and directed

S&F MCB single pole 240 volt 6 to 32 amps 10 KA complete all as specified and directed

S&F in repairs MCB SPN 40 Amps, AC, 240V, 10KA, ISI Marked 'C' curve incl thimble etc complete all as specified and directed.

M&L for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

Supply and laying pipe galvanized, “Medium grade”, including fittings 20 mm (1/2”) dia with all fitting laid in trenches complete all as specified and directed

S&F gun metal or globe or gate valves 15 mm dia with iron wheel scewed both ends complete all as specified and directed

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth and getting out including foming of bottom surface for laying of cable / pipe etc in soft/loose soil complete all as specified and directed

Supply , Laying and testing cable XLPE insulated screened, PVC bedded, Galvanised steel srip or wire armoured electric power cable (Heavy duty) 1100 V Grade, aluminium conductor of size 6 sqmm 2 core complete all as specified and directed

M&L for sand cushioning, spreading & levelling, watering and well ramming in layers not exec 25cm in soft/loose soil complete all as specified and directed

Supplying & laying burnt clay fly ash old size bricks, straight or curved on plan, laid flat with width equal to length of brick, laid dry over under ground cable for protection complete all as specified and directed.

GI light grade tubing 40mm dia laid in trenches, road crossing , pasing through pipe or laid in wall/pole complete all as specified and directed

SK INFRA INDIA (BID ID -3499083)

A.V. ASSOCIATES (BID ID -3515355)

MAHTAB ALAM (BID ID -3504942)