ADDN CUM ALTN AND PROVN OF ANTI SEEPAGE TREATMENT TO BLDG NO. P-11 OF HQ 146 INF OFFRS MESS UNDER GE FAIZABAD

Amount

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc and getting out in soft/loose soil complete as specified and directed.

M&L PCC (1:4:8) type D2 ( using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L brick work with old size sub class 'B' bricks in cement mortar (1:6), straight or curved on plan exc 6 m mean radius complete all as specified and directed.

M&L RCC (1:2:4) type B1 (using 20mm graded graded crushed stone aggregate) as in slabs supported on walls, beams and colums in floors, roofs, landings, deck slabs and shelves and the like complete all as specified and directed.

Use and waste form work to soffits of suspended slab such as roof slab, landings and similar work (Horizontal or sloping) for fair finished flat concrete surfaces n.exc 200 mm thick complete all as specified and directed.

S&F TMT steel bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

S&F TMT steel bars 6mm dia and over upto and including 10mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia as in stirrups, rings and binders complete all as specified and directed.

M&L15 mm thick rendering in cement mortar (1:4) mixed with liquid water proofing compond @ 3% of cement wieght or as per manufactirer's instructions, on fair faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement Note: WPC shall be measured & paid for separately at supply only rates.

M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surface for fixing wall tiles all as specfied and directed.

Supply only intergral water proofing compound of approved quality all as specified.

M&L for rendering 10mm thick in cemnet mortar (1:3) on fair finished surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and directed

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc to receive further plastering complete all as specified and directed.

M&L for rendering 15 mm thick plaster in cement mortar (1:6) on fair faces of brick work or concrete surfaces of wall, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick plaster in cement mortar (1:4) on fair faces of brick work or concrete surfaces of wall, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistant exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and finishing with textured exterior paint of required shade (Two or more coats applied @ 3.28 ltr/10 Sqm) over and including priming coat of exterior primer applied @ 2.20 Kg/10 Sqm complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling and walls with textured exterior paint of required shade (Two or more coats applied @ 3.28 Ltr/10 Sqm) over and including priming coat of exterior primer applied @ 2.20 Kg/10 Sqm complete all as specified and directed.

S&F Chromium plated fancy type Single Lever Basin Mixer without Popup Waste with 450mm Long Braided Hoses mixture of standard quality for mixing hot & cold water, with all the fitting etc , complete all as specified. Make: Jaquar ORP-10011BPM or equivalent as approved by GE

S&F Single lever wall mixture 3 in 1 System with Provision for both Hand shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower) of standard quality including all necessary fitting , complete all as specified. Make: Jaquar ORP-10125PM or equivalent as approved by GE

S&F Chromium plated OHS 180 mm dia round shape single flow (ABC Body chrome plated with grey face plate) WITH Rubit cleaning system shower including all necessary fitting as per manufacture instruction , complete all as specified . Make :- Jaquar OHS -1759 or equivalent as approved by GE

S&F Rimless Single piece-WC with UF soft close seat cover, Hinges,Fixing Accessories, Accessories Set and Cistern fittings, Size: 390x710x720 mm,, including connection to trap and drain, complete all as specified and directed by Engineer-in-Charge. Make:- Jaquar Modle no VGS-WHT-81853S300UF or equivalent as approved by GE

S&F wash hand basin with PVC VANITY 24 " including waste pipe, waste cupling with all fitting complete all as specified and directed by Engineer-in-Charge. Make - Somany or equivalent as approved by GE

S&F glass encloser cat no JSE-CHR 81000680F22X DOOR WITH WALL GLASS HINGES complete all assecceary as required complete all as specified and directed by Engineer-in-Charge. Make - Jaquar OHS-CHR-1649 or equivalent as approved by GE

S&F in repair, 15 mm bore CP fancy type Bib Cock with Wall Flange , scewed down, screwed for iron pipe or for brass ferrule and fixed , complete all as specified and directed. Make - Jaquar ORP-10037PM or equivalent as approved by GE

S&F in repair, 15 mm bore Angular Stop Cock with Wall Flange screwed down both ends for iron pipe fixed, complete all as specified and directed. Make - Jaquar ORP-10053PM or equivalent as approved by GE

Demolition of floor, hearth or wall tiling including cement mortar bedding (but not backing ) including removing serviceable tiles from site to the MES store and removing rubbish off the premises complete all as specified and directed.

M&L for Virified Ceramic tiles Dark Shade/Double charged/ ultra charged shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 Sqm in vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Virified Ceramic tiles Dark Shade/Double charged/ ultra charged shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floor surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for 8 to 10mm thick (square) non skid coloured heavy duity tiles (Endura) of size 600mmX600mm in floor complete all as specified and directed by Engr-in-charge.

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar (1:6) laying floor finishes complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick / concrete surfaces in cement mortar (1:4) for receiving tiles complete all as specified and directed.

S&F in repairs, stainless steel toilet paper holder fixed with wooden gutties and screws to wall surfaces complete all as specified and directed. Make:- Prayag Cat No BA 88 or equivalent as approved by GE

S&F in repair, sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard complete all as specified and directed.

S&F in repairs, PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs, Health faucet with 1 mtr long flexible tube with wall hook complete all as specified. Make Prayag Cat No BEA 85 or equaivalent as approved by GE

S&F in repair, Brass chromium plated towel rack and fixed complete all as specified and directed. Make:- Prayag Cat No BA 02 or equivalent as approved by GE

S&F in repairs, stainless steel grating 100mm square/round with or without hole complete all as specified and directed.

Supplying and laying of 16 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and directed.

S&F fancy type 19/20 mm drapery curtain rod stainless steel with and including fixing arrangement complete all as specified and directed by Engr-in-Charge..

S&F set of two nos stainless steel finials (Latto) fancy type suitable for 19/20 mm drappery / curtain rod complete all as specified and directed.

Taking down chowkhat or frame (without taking off shutter) exc 1.5 sq. m but n.exc 4 Sqm with shutters etc complete all as specified and directed.

M&L for 1st class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S&F for 35mm thick 1st class HW glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (any number of sash bars), edges of framing plain chamferred or rounded, fitted with mitred beads for securing glass etc, sizes of members of shutter as specified in SSR Part-I, Section 8, Clause 8.20 (a), fitted to chowkhat, complete all as specified and directed by Engr-in-Charge. Note:- Shutter shall be made of well seasoned Shisham or Sagwam wood only.

M&L for 35 mm thick 1st class hardwood plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged), supplied and fitted to chowkat complete all as specified. Note:- Shutter shall be made of well seasoned Shisham or Sagwam wood only.

S&F 200mm long stainless steel barrel tower bolts complete all as specified and directed by Engr-in-charge.

S&F 300mm long stainless steel barrel tower bolts complete all as specified and directed by Engr-in-charge.

S&F 200mm size stainless steel handle complete all as specified and directed by Engr-in-charge.

S&F 100 mm size stainless stell butt hinges medium weight cold rolled complete all as specified and directed by Engr-in-charge.

S&F 150mm size stainless steel door stopper complete all as specified and directed by Engr-in-charge.

S&F for 250 mm size stainless steel sliding door bolt not less than 12 mm dia with and including a minimum of 6 bolt and nuts, four on bolt plate and two on staple plate, complete all as specified and directed by Engr-in-charge.

M&L for preparing new wooden surfaces of any description, width or girth including knotting & stopping etc and applying two or more coats of PU (Polyurethane polishing) polish over & including a coat of wood filler and finishing the surfaces to give a neat and glossy finish complete all as specified and directed.

Supply only stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm, fixed with stainless steel staples, complete all as specified and directed by Engr-in-charge.

S&F in replacemetnt Rotational moulded (double layered as per IS 12701) polythylene water storage tank cylindrical vertical with closed top of 500 ltrs capacity, ISI marked with valid CMLNo., hoisted and fixed in position complete all as specified and directed by Engr-in-charge.

M&L for providing water proofing treatment on RCC roof slab including multi storied buildings as per following operations and specifications :-

Dismantling of brick tiles or terracing tiles single layer laid over roof slab including stacking the serviceable tiles and rubbish off the premises complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate) for roof padding complete all as specified and directed

M&L for 10 mm thick plastering in cement mortar (1:3) mixed with liquid water proofing compound @ 200 ml per 50 kg bag of cement or otherwise as per manufacturer's instructions, finished even & smooth without using extra complete all as specified and directed. Note:- WPC shall be measured and paid for seperately at supply only rates.

M&L for cleanig of plastered surfaces of roof slab, applying a coat of bituminous primer at the rate of 0.30 ltr per sqm and applying evenly a tack coat of industrial bitummen 85/25 at the rate of 1.20 Kg per Sqm complete all as specified and directed

M&L for laying APP based polymeric membrane minimum 3 mm thickness (weighing not less than 3.0 Kg per Sqm), reinforced with polyster non woven fabric (weighing not less than 150 gms/Sqm) by torch application. The over lap shall be 100 mm on transverse direction & 75 mm on longitudinal direction and applying evenly a coat of industrial bitummen 85/25 at the rate of 1.20 Kg per sqm over laid & jointed polymeric membrane complete all as specified and directed.

M&L for machine pressed cement concrete tiles of size 20 cm x 20 cm x 20mm thick, laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:4) mixed with liquid water proofing compound @ 200 ml per 50 kg bag of cement or otherwise as per manufacturer's instructions, set & jointed in neat cement slurry on roof surfaces, cut and polished complete all as specified and directed by Engr-in-Charge.

Supply only liquid water proofing compound of approved quality all as specified and directed

Excavation in post holes (or Similar holes) in soft/looe soil each n.exc 0.5 cum, getting out, returning, filing in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50 m and making good surfaces complete all as specified and directed by Engr-in-Charge.

M&L for PCC (1:2:4) type B-2 (using 40 mm graded stone aggregate) as in foundation, filling, post holes and mass concrete complete all as specified and directed by Engr-in-Charge.

M&L for rolled mild steel work as in roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections, square or ractangular hollow sections) including distance pieces, cleats, gusset plates, base plates etc complete all as specified and directed by Engr-in-Charge.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

M&L for rolled steel sections as in main and cross beams, hips and jack rafters including angle section, pipes, channel, beam section, gusset plates etc fixed with welding, nut bolts or clamps etc upto 8.0 m height, conforming to Fe 410-W (Gde -E-250) complete all as specified and directed by Engr-in-Charge

M&L for preparing new steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L for hardcore of broken stone or boulders of gauge n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surfaces complete as specified and directed.

M&L for 75mm thick cement concrete (1:4:8) type B2, (using 40mm graded stone aggregate) as in sub base and the like complete all as specified and directed.

M&L for 80mm thick Machine pressed precast concrete M45 grade interlocking paver block of any shape and size of with grey cement and pigment, conforming to IS 15658-2006, laid over sand cushioning complete all as specified and directed. Note:- Sand for cushioning shall be measured and paid for separately.

M&L for sand filling under floors, spread and levelled in layers of any thickness for cushioning of interlocking paver blocks complete all as specified and directed by Engr-in-Charge.

R K BROTHERS

His And Her Enterprises

Saket Traders

ABC CONSTRUCTION CO

JYOT BUILDERS

M/S AVADH ENTERPRISES

R.S Enterprises