Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.0 CrAccepted-AOC | ₹1.0 Cr | 1 | Accepted-AOC Due to lower rate |
| 2 | 2₹1.1 Cr+₹1.1 L (1.01%)Rejected-AOC | ₹1.1 Cr+₹1.1 L (1.01%) | 2 | Rejected-AOC Due to higher rate |
| 3 | 3₹1.1 Cr+₹3.4 L (3.28%)Rejected-AOC | ₹1.1 Cr+₹3.4 L (3.28%) | 3 | Rejected-AOC Due to higher rate |
Tender Value
₹95.9 L
EMD Value
₹1.9 L
Closing Date
2 Jul 2021, 2:00 pmClosed
EXECUTIVE ENGINEER
EXECUTIVE ENGINEER PUBLIC HEALTH ENGINEERING DIVISION NARWANA
Loan Construction of one no HLT repair of 4 nos ss tank repair of 3 nos HLT 5 nos Fbed repair of ss well repair of v notch houdies repair of sluice valve houdies replacement of PM const of BStn laying cutting jointing testing of 100 mm id 150 mm id
2021_HRY_176885_1
SE No. 3361 dated 14.06.2021
Open Limited
Civil Works
Tender
NARWANA
Please refer Tender documents.
3 documents required · 3 mandatory
₹5,000
₹1.9 L
Yes
10 Aug 2021
22 Jun 2021
2 Jul 2021
22 Jun 2021
2 Jul 2021
22 Jun 2021
Amount
Provision for 200 mm i/d floating arms complete with in all respect
Taking out filter media top to bottom layers
Placing of filter media all layers after washed and cleaned qty. After deducting the 10% wastage
Supply & Erection of Horizontal spindle split casing type pumping sets of minimum Four (4) Star rating duties directly coupled to AC squirrel cage induction type motor with 1440 RPM, 3 phase, 50 Hz and accessories as described in Schedule No. II complete in all respect with priming arrangement with complete base frame. A) Raw water pump set 1600 Lpm , 12 mtr head ( 7.50 BHP )
B ) Clear water pump set 1600 Lpm , 40 mtr head ( 25 BHP )
C ) Clear water pump set 550 Lpm , 30 mtr head ( 7.50 BHP at w/w for B/stn. )
D ) Clear water pump set 550 Lpm , 40 mtr head ( 10 BHP at B/Stn. )
Supply and fixing of CI double flanged pipe and specials / bell mouth including cost of jointing material laying jointing refilling including making adequate support of masonary / concrete for delivery and suction pipe from bell mouth in the collecting tank upto the rising main laid by the department as per plan shown from the foundaton wall of pump chamber for all the raw water and clear water pumping sets at water works in position as per specification given in schedule no. II for pumping machinery SI D/F pipes 150 mm i/d
Bell mouth 150 mm i/d
Supply, erection, testing and commissioning of Wall mounted electrical panel board , fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 500 x 1200mm and 400mm deep having following accessories : 1. Incomer switch 200 Amp 2. Aluminium bus bar chamber of 300 Amp. capacity 3. Volt meter , 100 x 100 mm range 0 to 500 V (AE/KAPPA/L&T) 4. Indicating Lamp-One set
Supply, erection, testing and commissioning of Wall mounted electrical panel board , fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200 x 900mm having following items : a) For raw water pump sets for 1600 Lpm x 12 M head = 2 No. a) Main switch 63 Amp 2 No. ((L&T, Siemens, ABB) b) Volt meter 100 x 100mm range 0 to 500 volt 1 No.(AE/KAPPA/L&T) c) Amp meter 100x100mm range 0 to 100 Amp 2 Nos(AE/KAPPA/L&T) d) CT 100/3 Nos (AE/KAPPA/L&T) e) VSS 1 No & ASS 2 No. each of approved make f) SPP 2 No. of approved make g) Motor starter, star delta, 2 No. for 3000 LPM x 12 M Head Motor (L&T Siemens, AAB) h) Capacitor of suitable capacity = 2 No i) Indicating Lamp-One set j) Change over switch 63 Amp = 1 No
Supply, erection, testing and commissioning of Wall mounted electrical panel board , fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200 x 900mm and having following items : a) For Clear water pump sets for 1600 Lpm x 40 M head = 2 No. a) Main switch 63 Amp 2 No. ((L&T, Siemens, ABB) b) Volt meter 100 x 100mm range 0 to 500 volt 1 No.(AE/KAPPA/L&T) c) Amp meter 100x100mm range 0 to 100 Amp 2 Nos(AE/KAPPA/L&T) d) CT 100/3 Nos (AE/KAPPA/L&T) e) VSS 1 No & ASS 2 No. each of approved make f) SPP 2 No. of approved make g) Motor starter, star delta, 2 No. for 3000 LPM x40 M Head Motor (L&T Siemens, AAB) h) Capacetor of suitable capacity = 2 No i) Indicating Lamp-One set j) Change over switch 63 Amp = 1 No
Supply, erection, testing and commissioning of Wall mounted electrical panel board , fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200 x 900mm and having following items : a) For Clear water pump sets for 550 Lpm x 30 M head & 40 M head = 2 No. ( At w/w for B/Stn. & at B/Stn. ) a) Main switch 63 Amp 2 No. ((L&T, Siemens, ABB) b) Volt meter 100 x 100mm range 0 to 500 volt 1 No.(AE/KAPPA/L&T) c) Amp meter 100x100mm range 0 to 100 Amp 2 Nos(AE/KAPPA/L&T) d) CT 100/3 Nos (AE/KAPPA/L&T) e) VSS 1 No & ASS 2 No. each of approved make f) SPP 2 No. of approved make g) Motor starter, star delta, 2 No. for 3000 LPM x40 M Head Motor (L&T Siemens, AAB) h) Capacetor of suitable capacity = 2 No i) Indicating Lamp-One set j) Change over switch 63 Amp = 1 No
Supply erection, testing of ISI marked copper wire for 04 Nos motors with under ground system in PVC and flexible pipes copper wire size 6 sq. Mm complete in all respect with accessories like thimble etc. Complete in respects.
Supply erection, testing of ISI marked copper wire for 03 Nos panel boards from main switch to panel and wiring of panel with size 10 sq. mm (coppeer wire) ISI marked complete in all respect with accessories like thimble etc. complete in all respect.
Supply erection testing of reputed make LED light 100 watt with fitting and accessories complete in all respect
Credit of old pumping machinery
Bidder Name
Amount
Umesh Kumar Contractor(GSTN-NA)
charan singh contractor(GSTN-NA)
Rajinder Parshad Jain Contractor Jind(GSTN-NA)
Umesh Kumar Contractor
Rajinder Parshad Jain Contractor Jind
Umesh Kumar Contractor
charan singh contractor
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .