Widenning and Strenthning in 02/04 lane of Hariyali Atithi Bhavan (Near Andhiyajhbag Ramlila Maidan) to Surajkund Colony Via Nirankari Bhavan Turning Road. in F.Y.-2023-24 LOT No 1

Amount

Removal (including stacking and proper handling over to concerned Authority) of stumps and roots of trees having girth 300mm and backfilling the pit created to required compaction complete as per technical specifications clause 201 and 305, or as directed by the engineer, for girth size above 300mm. Excluding GST.

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres. Excluding GST.

Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m. Excluding GST.

Removal of unserviceable soil including excavation, loading and disposal upto 10 km lead but excluding replacement by suitable soil which shall be paid seperatelyas per clause 305. Excluding GST.

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits area lead up to 10 Km with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to97% proctor density requirement of table No. 300-2 MORTH specification no. 305. Excluding GST.

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 . Excluding GST.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Excluding GST.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam (Stabilization with emulsion3.5% and cement 1% ) specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Excluding GST.

Providing and applying tack coat with bitumen (VG-10) using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. Excluding GST.

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder( VG-30) @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. Excluding GST.

Providing and applying tack coat with bitumen (VG-10) using bitumen pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. Excluding GST.

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder (VG-40) @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects. Excluding GST.

P/L of Interlocking concrete block pavement Zig - Zag having thickness 80 mm as per drawing and technical specification clause 1504 Excluding GST.

Supply and errection of Victoria electric poles 9m long with all its assisorises in center of median required for proper complation of work as per direction of E/I @ 25M between pole to pole ( Analysis for per pole). Excluding GST.

Supply and errection of Fottpath electric poles 9m long with all its assisorises in center of median required for proper complation of work as per direction of E/I @ 25M between pole to pole ( Analysis for per pole). Excluding GST.

Painting of kerbs with two coats synthetic enamel paint in all shades on new concrete surface after filling earth in median as per MORT&H specificaiton No 14.16.(800). Excluding GST.

Excavation for road way in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 metres (average lead50 metres), including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections. Excluding GST.

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. Excluding GST.

Plain cement concrete M-15 in culvert complete as per Drawing and Technical Specification. Excluding GST.

M-25 Reinforced Cement Concrete in box culvert complete as per Drawing and Technical Specification. Excluding GST.

Furnishing and Placing Reinforced/ Prestressed cement concrete M-20 grade in foundation as per drawing and Technical Specification. Excluding GST.

Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications. Excluding GST.

Center Line Edge Line (Thermo Plastic Paint) Providing and Applying Hot applied thermo plastic compound 2.5 mm thick including reflectorising glass beads @ 250 gm /sqm area. Thickness of 2.5 mm is excusive of surface applied glass beads as per IRC 35. The finish surface tu be leveled uniform and free streaks and holes. Composition of thermo plastic material shall be as per table 800-3 of clause 803 of MORTH including cost of all material labour T&P etc required for proper completion of work as directed by E/I. Excluding GST.

Cat Eye (Raised Pavement Marker/Road Stud) Sharp Curve and Abadi Portion. Supply and fixing of Raised Pavement marker (Cat Eyes) of Avery Dennision/3M make of approved quality in size of width not exceeding 20 mm and height not exceding 20 mm made up to strong Engineering Polymer thermoplastic polyurethene with Electronic welded abrasion resistant lenses for Retro Reflective in dry and wet weather condition alone with Bituminous adhesive as per MORTH Specification. Excluding GST.

M/s VIJENDRA PRATAP SINGH

M/S R.K.TRADERS

AMBE INFRAPROJECTS PRIVATE LIMITED