PROVN OF SWIMMING POOL AT NIWARU MIL STATION

Amount

SCH 'A' PART-I: BUILDING WORKS (to be quoted by contractor)

M&L for construction of swimming pool block comprising of following buildings & accessories complete, all as specified, shown on drg and as directed by Engineer-In-Charge:- (i) Swimming Pool Block (Block 'A') including diving pool, diving tower with staircase (Block 'B'), side walk, spectators gallery, Surface drain and scum channel covered with grating and pool accessories etc (ii) Changing room block (Block 'C') for officers & JCO/ORs complete. (iii) Plant room (Block 'D') (iv) Balancing RCC tank (Block 'E') (v) Compound & parapet wall with Grills, plinth protection, ramp, platform, steps and wicket gates.

Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY WORKS " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION WORKS" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

Lump sum price worked out by the contractor for "ROAD, PATH & CULVERT" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

Lump sum price worked out by the contractor for "SEWAGE DISPOSAL " as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

Lump sum price worked out by the contractor for "AREA DRAINAGE" as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

Lump sum price worked out by the contractor for "FENCING, PLATFORM AND PATH FOR OUTDOOR SUBSTATION" as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES

Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES

Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION " as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES

Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT & EARTH WORK etc." as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

Sch 'A' PART-XI: MISCELLANEOUS ITEMS Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under SCH A PART-X (SITE CLEARANCE, SITE DEVELOPMENT & EARTH WORK schedule).

INTERNAL WATER SUPPLY

S&F Chrome plated health faucet ABS body with wall hook with 1 m long stainless steel braided rubber hose complete, as approved by the GE.

S&F two way bib taps, 15mm dia, fancy type cast copper alloy chromium plated with crutch or butterfly handle, scrwed down, scrwed for iron pipe or for brass ferrule and fixed, complete, all as specified.

INTERNAL ELECTRIFICATION

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm (Phase-Red& Neutral-Black) and earth continuity conductor 2.5 Sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20mm bore, ISI marked ivory colour with all conduit fittings/fixing accessories and unwelded sunken galvanized pressed steel terminal boxes of thickness not less than 1.2mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches as required for one light point control by one, one way switch. complete, all as specified & directed.

All as per item No 13.01 here-in-before but One fan point controlled by one nos, one way switch all as specified & directed

All as per item No 13.01 here-in-before but One three pin 5 Amp socket outlet point on independent board controlled by one nos, one way switch on independent board.

All as per item No 13.01 here-in-before but One three pin 5 Amp socket outlet point on same board controlled by one nos,

All as per item No 13.01 here-in-before but point wiring with 2.5 sq mm single core FRLS cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on independent board.

S & F Highly efficient LED Bulbs, 9 watts complete all as specified and directed

SEWAGE DISPOSAL .

M&L for providing, laying, testing and commissioning of 150mm bore double wall corrugated pipe (Remarks DWC) pipes of SN-8 Grade for sewer line as per IS-14333,16098(Parts):2013 below ground at requred depth including all jointing fixtures carriage, barricading, lighting arrangment, cutting of any type road etc., complete all as specified &directed by Engr-In-Charge..

M&L for construction of Septic tank for 20 user , exccvation in any type of soil, foundation in PCC 1:4:8, brick work in CM 1:4, RCC slab covers incl RCC precast manhole cover having 6 mm plate embeded all around/fibre reinforced cover with angle iron frame, vent shaft and sludge chamber etc, complete, all as specified & shown in drawing.

M&L for construction of Soakage wells 1.80 M dia and 3.00 M effective depth Soakage wells, excavation, in any type soil, fdn in PCC 1:3:6, walls of honey combed masnory with top ring of M-25 concrete including intercepting chamber and screen chamber made of Brick masnory in CM, RCC cover slab in M-25/SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats, complete, all as specified & shown on drgs.

AREA DRAINAGE

S&F double pin ABS Grating 300 mm wide and 25mm height for surface drain complete all as specified.

EXTERNAL WATER SUPPLY

Supply , laying and testing Ductile Iron pressure pipe 150 mm bore with spigot and socketed ends centrifugally cast, Class K-7, conforming to IS: 8329/2000 - blast furnace slag cement with portland cement properties suitable for push-on-jointing (Rubber tyton joints) with inside cement mortar lining with internal metallic zinc coating and external Black Bitumen coating complete all as specified and as directed by Engr-in-charge. Note:- Cost of joints including jointing material /rubber tyton ring shall deemed to be included in unit rate quoted by the tenderer. Earth work & DI specials/ fittings shall be measured & paid separately.

M&L for brick masonry valve pit of size 105x105x110 cm (internal dimension of chamber) including plastering on internal surfaces in cement mortar 1:4 and flush pointing to external surfaces as the work proceeds in same mortar complete with 3.15 mm thick thick MS sheet cover, handle, packing arrangement,earth work in any type of soil including removal of excavated soil to n.exc 50 m and painting with 2 coats of synthetic enamell paint over a coat of red oxide primer to steel surfaces complete all as specified, shown in drg & as directed by Engr-In-Charge.

All as per Item No 16.02 here in before but of size 60x60x60 cm .

Supply and fix Cast Iron air valves with two air outlets, conforming to IS 14845 of size 50 mm bore and fixing up in cast Iron water supply mains of size 100 mm bore including jointing material such as rubber gaskets, nuts bolts & washers of suitable size including testing etc. complete all as specified & directed by Engr- In- charge.

EXTERNAL ELECTRIFICATION WORK

Supply, installation & testing of HT 11 KV, 3 phase, 50 Cycles, 21 KA for 3 sec, 3 way, motor operated, one side extensible, front side cable entry, outdoor type SF6 Insulated RMU with 2 Nos Vacuum circuit breaker (CB) feeder as outgoing + 1 No Vacuum circuit breaker (CB) feeder as incomer with Air Insulated bus connected metering unit (M) along with common item & accessories for totally enclosed metal clad SF6 Ring main unit outdoor type, SF6 filled having rupturing capacity 350 MVA , over load & earth fault protection of rating 630 Amps complete all as specified and comprising with following :-

Each Vacuum Circuit Breaker (CB) Feeder Comprise of following as Incoming (01 No) :- (a) 11 KV, 630A, 21kA VCB with Motor Spring charging mechanism, trip & closing coil for remote operation : 01 No (b) Manually Operated 630A disconnector with built-in earth switch: 01 No (c) Mechanical position Indicator (ON/EARTHED) : 01 No (d) CT with ratio 200-100/1-1A, 2.5VA, CL-10P10 for Protection & 2.5VA, Cl-0.5 for Metering : 01 Set (e) Multifunction meter with Maximum Demand : 01 No (f) Self-Powered 3O/C+1E/F Relay. : 01 No (g) Live Cable Indication : 01 No (h) Cable termination bushing suitable for 1 run size upto 3Cx300Sq mm XLPE cable : 01 Set (j) Cable termination cover boots (Push on type) : 01 Set

Each Vacuum Circuit Breaker (CB) Feeder Comprise of following as Outgoing (02 Nos) :- (a) 11kV, 630A, 21 KA VCB with Motor Spring charging mechanism, trip & closing coil for remote operation. : 01 No (b) Manually Operated 630A disconnector with built-in earth switch : 01 No (c) Mechanical position Indicator (ON/EARTHED) : 01 No (d) CT with ratio 200-100/1-1A, 2.5VA, CL-10P10 for Protection & 2.5VA, Cl-0.5 for Metering : 01 Set (e) Multifunction meter with Maximum Demand : 01 No (f) Self-Powered 3O/C+1E/F Relay : 01 No (g) Live Cable Indication : 01 No (h) Cable termination bushing suitable for 1 run size upto 3Cx300Sq mm XLPE cable : 01 Set (j) Cable termination cover boots (Push on type) : 01 Set (k) Air Insulated Metering Unit (M) Connected to Bus :- : 01 Set (l) Air Insulated enclosure with necessary Bus connection : 01 Set (m) PT 11kV/√3 / 110V/√3, 25VA, Cl-0.5 : 01 Set

S&F HT 11 KV, triple pole, mechanical operated, out door type gang operated device (GOD) alongwith air-break switch and operated rod suitable for vertical mounting rotating type complete with drop out fuse having 12 insulators of rating upto 200 Amps complete all as specified and directed and specified by Engineer-in-Charge.

All as per description of serial item No. 17.07 & 17.08 above but comprising the following incoming & Outgoing accessories & switchgears :-- (LT Panel at Under Ground Sump) Incoming :- (i) MCCB 415 Volts of capacity 63 Amps 25 KA, 4 pole - 01 No Bus Bar :- (i) 01 Set of 100 Amps, TPN, Aluminium Bus bars Outgoing :- MCCB 415 volts of capacity 40 Amps 16 KA, 4 pole - 02 Nos Onload Changover switch upto 63 Amps , 415 volts , 4 pole-01 Nos Fully automatic star delta starter for 7.5KW/ 10 HP motor-02 Nos 3 ph LED multifunction metrer CI 0.5 -01 Set LED indicator lamp –01 No (set of three)

S&F factory made street/gate light junction box, single phase, 2 wire, 240 volts, weather proof pole mounted made out of 1.63 mm thick MS sheet of size 250x200x100mm depth, which shall be in accommodated with properly insulated Phase & Neutral aluminium buses of 63 Amps rated current cap and including MCB SPN 6 Amps - 01 Nos, for connecting of street/gate light fittings, with hinged door and locking bolt, handle complete all as directed.

Excavation by trenchless technology boring of holes under road pavement, hard standing by trenchless technology using ultra sound, technique and necessary machineries including HDPE pipe of 150mm dia suitable for 0.4 Mpa working pressure, complete, all as directed by Engr-In-Charge.

FILTERATION PLANT (A) FILTRATION, PUMPS, AIR BLOWER, DISINFECTION, CHEMICAL DOSING PLANTS ITEMS

Supply, installation, testing and commissioning of vertical floor mounted self-supporting totally anticorrosive, bobbin wound FRP pressure sand filter, fiber glass shell with thickness as specified by the manufacturer dished ends complete with UPVC face piping ABS plastic with manual snap dump drain valve, water drain valve, pressure gauge, sample cock, air vent and all accessories with initial charge of filter media (silica quartz sand and gravel) and with vertical supports with piping and suitable foundation as required at site, for swimming pool of size 50 mx21 mx2.85 m (Avg depth) suitable for 08 hours turn over period having following specifications:- (a) Flow rate 125 m3/Hrs (each), (b) Vessel dia minimum-2000 mm (c) Filtration velocity 40 m3/Hrs/M2 (d) Working pressure 2.5 Kg/Cm2 all as per DIN 2501 standards along with all types of valves, back wash system, all as specified & directed by Engr-In-Charge. Note:- Drawing for filter shall be approved by GE/AGE(I) before placement of order. Make: ION EXCHANE (India) Ltd/Astral/Hayward/Leisure poool/Techpool/Certikin swimming pool product India Pvt Ltd

Supply, install, testing and commisioning of Self Priming water circulation pump, Horizontal split casing end suction pump 415 V, 50 Hz, 1450 RPM suitable for pressure sand filter designed discharge capacity 125 m3 / hour @ 15 Metre head having pump efficiency 65-75%, and suitable for filteration plant as per Sl No. 18.01 for ensuring turnover period 7.0 to 8.0 hour with 7.5 KW/10 HP capacity prime mover motor IE2 TEFC Two Poles, Continuous Opeartion F class insulation, protection IP-55, Operating voltage 380V-440 / 3 phase, 50HZ . Pump with pre filter in Cast iron with matching connection size Impeller & Motor shaft in Stainless steel AISI 304 with Mechanical seal in Graphite/Ceramic,The pump shall be of cast iron body, bronze impellar, with mechanical seals, TEFC squirrel cage IE-2 induction motor, M.S. Fabricated base plate, mounting channel frame, accessories and fitting i.e. pressure gauges, Air release valve, drains, coupling, coupling guard, PCC foundation, vibration isolation arrangement complete all as specified in the particular specification. Make: ION EXCHANE (India) Ltd/Astral/ Hayward/Leisure poool/Techpool/Certikin swimming pool product India Pvt Ltd

BLANK

Supply installation testing and commisioning of UV system consisting of following:- UV system flow rate 25.00 m3/h, dose 11 MJ/cm2, light power 75W UVC equipment made using the latest technological design to ensure effective water flow through the unit, driving better UV light performance designed to bear pressure upto 4 bars, power consumption low, the whole of the electrical system protected so that water cannot enter and thermal element to prevent power surges, the UVC units distributed with two male threads of 1.5"/50mm, the product easy to install, each unit distributed with stainless steel anchoring fixtures for vertical or horizontal fastening and complete all as directed. Make: Astral/ Leisure poool/ Hayward//Tech pool

Supply, installation, testing and commissioning of Automatic electronic Membrane Dosing Pumps for chlorination , PH correction complete (injecting Soda Ash, Alum, Calcium Hypochlorite) with chemical storage tank, Agitators (of adequate size for doing for one day) and with following specifications:- (i) Dosing pumps:- Design, supply, installation, testing and commissioning automatic sensor based dosing pump sets including LCD screen on/off or proportional operation mode 0-14PH 1000-1400 MV, PH, RX (ORP) electrode inlet (10 tera OHM), including electrode screen resolution 0.01PH ( + ) 1 mv ph/ Rx 10 litre /hour -5 bar, IP-65 protection anti acid plastic casing, control panel protection weather proof and resisting UV rays, standard power supply 230V AC 50 HZ single phase with sensor. PH sensor kit including PH sensor buffer solution, sensor holder, level sensor including RX sensor, buffer solution, sensor holder, level sensor. (ii) Chemical storage tanks:- Semi transparent polyethylene tank with external scale so that levels can be checked easily capacity of tank 500 Ltrs. (iii) Agitators:- Agitators for easy installation in the tanks, provided with steering grip in Bakelite, rod and propeller arms in PVC, length of stirring rod 900mm. ( Note:- 04 Nos dosing pump will be used for the chlorination of water and 02 Nos for maintaining PH level.) Make:-Astral/Haywards, Leisure Pool, TechPool/ ION EXCHANGE.

NOZZLES, PIPES, VALVES, HEADER

Supply and installation of flow adjustable ABS heavy duty foot inlet nozzles having flow rate of 6 Cum per hour fitted vertically on the UPVC pipe of size 63 mm to 160mm bore as required on site along with connection arrangment such as Stainless steel screws, tail piece , T-section, reducers on the bottom for the swimming pool and diving pool for filling the swimming pool and diving pool complete. Make:- Astral/ Hayward/ Leisure Pool/ Tech Pool/ ION EXCHANGE Note: All the nozzles shall be fixed as per swimming pool and diving pool water supply drawing or as per manufacturer recommendation.

Supply and installation of flow adjustable ABS heavy duty foot inlet nozzles having flow rate of 5 Cum per hour fitted vertically on the UPVC pipe of size 63 mm to 160mm bore as required on site along with connection arrangment such as Stainless steel screws, tail piece , T- section, reducers on the bottom for the swimming pool and diving pool for filling the swimming pool and diving pool complete. Make:- Astral/ Hayward/ Leisure Pool/ Tech Pool/ ION EXCHANGE Note: All the nozzles shall be fixed as per swimming pool and diving pool water supply drawing or as per manufacturer recommendation.

Supply and laying/ fixing in floor / in trench / on wall / concealed UPVC pressure pipes of following sizes Class - 5 (10kg/cm2) with plain socket suitable for and including solvent cement jointing conforming to IS: 4985/2000 complete with fitting and specials such as bends, tees, unions, reducers, flanges and plugs etc complete. Note : The pipes and fittings shall be tested to pressure of 10 Kg/Sqcm.

63 mm (Outer dia)

160 mm (Outer dia)

200 mm (Outer dia)

250 mm (Outer dia)

315 mm (Outer dia)

350 mm (Outer dia)

Supply and fixing water type cast iron butterfly valves of the following sizes tested to 10 kg/sq.cm pressure (including flanges & All other accessories) complete all as specified and directed.

63 mm bore

150 mm bore

200 mm bore

250 mm bore

Supply and fixing, testing sluice valve cast iron of 300 mm dia, ISI marked with flanged ends drilled with iron wheels head shuts and open direction cast on it class PN-1.6 conforming to IS : 14846-2000 including rubber insulation packing rings , jointing material nuts ,bolts & washers of suitable size etc on existing pipe including testing on completion, complete, all as specified & directed.

Supply and fixing, testing sluice valve cast iron of 350mm dia, ISI marked with flanged ends drilled with iron wheels head shuts and open direction cast on it class PN-1.6 conforming to IS : 14846-2000 including rubber insulation packing rings , jointing material nuts ,bolts & washers of suitable size etc on existing pipe including testing on completion, complete, all as specified & directed.

S&F 150 mm bore CI dual plate Check Valve ( Non return valve) (PN 20) complete with matching flanges rubber insertion sheet, nuts, bolts and washer etc complete.

S&F 200 mm bore CI foot valve (PN 20) complete with matching flanges rubber insertion sheet, nuts, bolts and washer etc complete.

Supply and fixing of following sizes of heavy duty PVC puddle flanges of suitable length and made of (uPVC pipe 10kg/cm2) complete with matching flanges including jointing material all as specified and directed. Note :- These flanges shall be suitably placed between steel reinforcement as per standard Engineering practice.

150 mm / 160 mm bore as per site requirement

200 mm bore

250 mm bore

300 mm / 315 mm bore as per site requirement

Supply & fixing of ABS white plastic suction port/ vacuum nozzle suitable for and including solvent cement connection along with Stainless steel drain grating plate made out of 304 quality S S plates of size 500mm x 500mm with suitable supporting frame and of following sizes and having holes of required size for drainout chamber.Make: ION EXCHANE (India) Ltd/Astral/ Hayward/ Leisure poool/Techpool/Certikin swimming pool product India Pvt Ltd

M & L for Piping MS epoxy coated heavy grade, ISI marked of 200 mm bore for suction lines of five pumps separately with suitable dia Foot valves and butterfly valves in each suction, all as specified and directed by Engineer-in-Charge. Note:- Footvalve and butterfly valve will be measured and paid sepratly.

M & L for Piping MS epoxy coated heavy grade, ISI marked of 150 mm bore for delivery lines of five pumps separately with suitable dia Foot valves and butterfly valves in each suction, complete, all as specified and directed by Engineer-in-Charge. Note:- Footvalve and butterfly valve will be measured and paid sepratly.

M & L for MS epoxy coated heavy duty common header 300 mm bore for delivery and suction header of suitable length including required MS specials, complete, all as specified and directed by Engineer-in-Charge

Supply, installation, testing and commissioning of MS Structure work made out of angle, fastners, Tie rods, flat for pipe support and pump footing, all as specified and directed. Note : All MS work to be painted with 02 coats of synthetic enamel paint over a coat of red oxide primer.

UNDER WATER LIGHTING

Supply, installation, testing and commisioning of Pool under water integral LED model 14.4 Watt, wall mounted type working on 12 V DC, IP68 complete , including push in connector in 4 pole, flexible conduit and all fixing arrangement in swimming pool wall, complete, all as specified & directed.Note: All the light fitting will be inside the wall. No projection will be allowed. Cost of making groove for fixing of light is inclusive of unit rate quoted above. No AC power supply will be allowed behind light. Only DC power supply will be allowed from main panel. DC transformer will be fixed inside room. PVC pipe must be laid down during the casting of RCC frame/wall

Supply, installation, testing and commisioning of Junction box of suitable size round/square type with water proof covering made of ABS plastic material.

Supply and drawing 3 core 2.5 sq.mm. PVC insulated FRLSH copper conductor 1100 Grade unarmoured cable through PVC conduit under floor/ on wall from under water lights to distribution panel all as specified & directed by Engineer-in-Charge. (PVC conduit shall be measured separately)

S&F heavy duty PVC conduit 32 mm bore PVC, ISI marked, complete with accessories such as bends, junction boxes, pull boxes etc, complete, all as specified & directed by Engineer-in-Charge.

Supply, installation, testing and commissioning of water proof Distribution box for under water lights drivers and MCB, complete, all as specified & directed by Engineer-in-Charge.

CABLE WORK

Supply, laying, testing and commissioning of following size heavy duty PVC insulated sheathed copper conductor 1100 V grade unarmoured cable with required size of sleeves complete as required & directed by Engr-In-Charge:-

6 Sqmm x 4 core

4 Sqmm x 4 core

2.5 Sqmm x 1 core

4 Sqmm x 1 core

Supply, installation, testing and commissioning of GI perforated Cable Tray 200 mm wide all as specified and directed.

S&F heavy duty PVC conduit 25 mm bore PVC, ISI marked, complete with accessories such as bends, junction boxes, pull boxes etc, complete, all as specified & directed by Engineer-in-Charge.

MAINTENANCE ITEMS

Supply, installation, testing and commissioning of trolley mounted suction sweeper suitable for swimming pool with self priming electric driven pump set suitable for cleaning swimming pool capacity 2 HP, 3 Phase complete with PVC braided 40mm dia vacuum hose pipe of length minimum 30 Metre, 900 mm size Aluminum / bronze vacuum head, flexible copper cable from Main, PVC floats, wire rope and all connected accessories complete as following items:-

(i) 18 inch long Nylon brush -02 Nos (ii) Float complete to support the hose, clips for connection - 10 Nos (iii) Telescopic pole 4.8 Mtr long with extendible up 9 Mtr made of aluminum tubing complete:- 02 Nos (iv) Supply and fix anodised Extruded Stainless Steel Vacuum Head - 900 mm Stainless steel grade -304 fixed with clip type connection 25 mm / 50 mm dia maintenance kit complete all as specified and directed.-02 Nos (v) Deep bag skimmer clip type along with handle 5 meter long made of aluminium- 02 Nos (vi) Curved brush clip type - 02 Nos (vii) Algae brush clip type - 02 Nos (viii) Nylon rop 20 mm da -200 metre (ix) Supply only manual Test Kit for PH & Residual chlorine - 01 No (x) Supply only electronic Test Kit for PH & Residual chlorine -01 No (xi) Life bouy along with hook amd rop - 02 Nos (xii) Leaf rack made out of aluminium frame all as per sample - 02 Nos

Supply only TCCA 90 swimming pool disinfection in granular form having effective chlorine above 90 % to be supply in 50 kg plastic container

COMPETITION EQUIPMENTS

Supply, Installation, testing and commissioning of Anchor Fastener , Anchor Bracket SS 304, all as approved & directed

Supply, Installation, testing and commissioning of Suspended lane divider float lines- Float lines supplied with floats and stainless steel 6mm cable and hook, including float line anchors made with SS 316, float line flange anchoring socket made with SS 316 and float line tensioner in AISI 316. Length - 50mtr (100mm dia) with PVC Coated Wire with SS Hook, complete, all as approved & directed. Make: ION EXCHANE (India) Ltd/Astral/ Hayward/Leisure poool/Techpool/Certikin swimming pool product India Pvt Ltd

Supply, Installation, testing and commissioning of false start indicator made of SS 316, 42mm / 50mm dia pipe of height 1.8m consisting of 2 Nos post, 1 polyster chord and floats for 25m width Including support anchor for attachment on the deck area complete, all as directed. Make: ION EXCHANE (India) Ltd/Astral/ Hayward/Leisure poool/Techpool/Certikin swimming pool product India Pvt Ltd

Supply, Installation, testing and commissioning of Back Stroke Indicator made of SS 316, 42mm / 50mm dia pipe of height 1.8m consisting of 2 Nos post, 1 polyster chord and color indication flag for 25m width including support anchor for attachment on the deck area for completion, complete, all as directed.Make: ION EXCHANE (India) Ltd/Astral/ Hayward/Leisure poool/Techpool/Certikin swimming pool product India Pvt Ltd

Supply, Installation, testing and commissioning of FLOAT LINE roller made in SS-304 and as per FINA standards & FINA approved, mounted over rotating wheels for maximum mobility & transport width 1.8m complete along with holding hooks etc as required. (as required on design criteria) . Make: ION EXCHANE (India) Ltd/Astral/ Hayward/Leisure poool/Techpool/Certikin swimming pool product India Pvt Ltd

Blank

Blank

Blank

Blank

Blank

Blank

Blank

Blank

ARBORICULTURE

Supply & planting various trees well growth (ht of tree 1 to 1.5 m high/tall) as mentioned below by digging pit of size 0.4 X 0.4 X 0.6 mtr , removing and conveying unwanted material, grass , stones, etc to a distance exc 500 mtr, providing & flling fresh garden soil & farm house manure in excavated pit in 2:1 proportion, mixing garden soil & farm manure thoroughly to a height of 60 cm, well leveling, watering on previous height . Also planting two years growth of trees all as specified and approved and maintaining till well grown up & established by watering , weeding, clipping, rolling etc to the satisfaction of Engr-in-Charge and including replanting of the dead plants, all as specified and directed by Engr-in-Charge.

(a) Real Palm

(b) Amaltas

(c) Ashoka

(d) Gulmohar

(e) Shrub Bougainvilea

NOTE: For Ser ltem No 25.01 to 25.06 (i) Height of plant shall be measured from top of foliage (not from the isolated branch/leaf, main stem) to 150mm from top of root. (i) Water will not be supplied by MES. Contractor has to make his own arrangement for watering to plants. (i) The rates quoted by the contractor deemed to be included for watering, maintenance of plants till two years after certified date of completion of work. (iv). During two years after completion of the work if any plant is found dead, or not of satisfactory growth, plants of approved size and shape shall be provided without any extra cost. (v). Supply and application of manure, sweet earth and pesticides, fertilizers, etc up to two years after completion are deemed to be included in the quoted unit rate. (vi) Tenderer to note that 10% of quoted amount against these items shall be retained for two years after completion. In case of failure by the contactor to maintain the plants as above, the same shall be carried out by the department at contractor's Risk and Cost and the expenditure shall be deducted from this retained amount. (vii) The plants shall be brought at site Six months before the date of completion of the work as per Work order

PROVISIONAL LUMP SUM

Provide provisional lump sum for Rain water harvesting as listed below:- (a) Filtration tanks for rain water harvesting & allied items. : Rs. 129000.00 (b) Provisional lump sum shall be expended wholly or in parts as directed by GE/AGE(I). The works (Except excavation and earth work) under provisional lump sum shall be measured and paid for at applicable rates in MES SSR-2020- Part-II subject to percentage(+ or – denomination) computed under last column of this schedule above/below the lump sum price as inserted by the MES. Excavation and earth work against provisional lumpsum shall be measured under Sch ‘A’ Part-X separately.

PRIME COST SUM

Prime cost sum is to be used as directed by GE/AGE(I) under Condition 1(v) & 5 of IAFW-2249 for supply and fixing diving board, spring board on diving towers of swimming pool. Note: In case Contractor quotes more than +15% for prime cost sum, the amount quoted shall be restricted to Plus 15% above only. The total contract sum shall be corrected accordingly.

M/S RAJINDER SINGH (BID ID -3075091)

M/s. Shiva Engineers (BID ID -3082568)

BD AGARWAL BUILDTECH INDIA PRIVATE LIMITED (BID ID -3076883)

Dasmesh Buildcon (BID ID -3091148)

JASPAL SINGH & CONST (BID ID -3079227)

M/s godara infratech and power industries (BID ID -3077277)

ASC BUILDERS PVT LTD. (BID ID -3090357)

SOOD ASSOCIATES PVT LTD (BID ID -3076848)