Ward-12, Road improvement work by Dance from Ambedkar Road to the road in front of Nehru Yuva Kendra, from Netrapal Rajput Automobile via Shri Balaji Temple to Mangaldeep Plywood.

M-150 class B/w in 1:4 Cement C'sand mortor in including supply of all meterial labour t&P etc required for proper completion of work

12 mm thick plaster with cement and coarse sand of1.25 fineness modules in (1:4) over brick work minimum thickness not to be less than 1 cm including supply of all material, labour, tools & plant etc required for proper completion of the work. (AS PER PWD SOR 2022 PAGE NO 36 SI NO 13.11 NEW ITEM )

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality

Cement Concrete with 2 cm. gauge stone grit instead of 4 cm. gauge stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.

S/L of stone ballast 22.4 to 53 mm size with stacking for 10 measurment etc all complete as per the direction of engineer in-charge . AS PER PWD SOR 2020 RMR

Supply of screening material with stacking for measurment 11 etc all complete as per the direction of engineer in-charge AS PER PWD SOR 2020 RMR

Consolidation of stone aggregates of 45-63 mm/22.4-53mm size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2/3 as per Technical Specification Clause 405. AS PER PWD SOR 2022 20.2.1

Tack Coat for DGBM Providing and applying tack coat with bitumen VG-10 using bitumen pressure distributor @ 0.25 kg/sqm on the prepared bituminous surface cleaned with mechanical broom as per MoRT&H specification clause 503

Dense Graded Bituminous Macadam (Grading - II) Providing and laying dense graded bituminous macadam with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 4.5% by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specification clause No. 505 complete in all respects.

Tack Coat for BC Providing and applying tack coat with bitumen VG-10 using bitumen pressure distributor @ 0.20 kg/sqm on the prepared bituminous surface cleaned with mechanical broom as per MoRT&H specification clause 503