Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.5 LAdmitted-Finance | ₹31.5 L | L1 | Admitted-Finance |
| 2 | L2₹34.1 LAdmitted-Finance | ₹34.1 L | L2 | Admitted-Finance |
| 3 | L3₹34.6 LAdmitted-Finance 0 UMARCHHA KACHHAR MAHGAON CHAIL ALLAHABAD UTTAR PRADESH 212213 UDYAM UP 46 0009010 | KAUSHAMBI | UTTAR PRADESH | 212213 | ₹34.6 L | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | STUP Infra Pvt Ltd L1 | j k enterprises L3 | Shree Sawaria Construction L2 |
|---|---|---|---|---|---|---|
| 0.00Imp. Note - a) The bidder must possess valid EPF & ESIC registration. The bidders need to deposit EPF & ESIC with appropriate authority. The reimbursement for EPF & ESIC deposit shall not be made. b) The payment of wages to labourers should be made through bank. c) The bidder must possess sufficient manpower & other resources (as detailed in SGF ) required for the timely completion of work. | ||||||
| 1.00 | Dismantling the Mosaic /white glazed /Ceramic /Vitrified tiles, Kotah stone etc. in flooring/dado/skirting etc. including dismantling of bedding mortar, stacking of materials and disposing of debris within 50 metres lead etc., all complete as per specifications & as directed by Engineer in-charge. | 600 | Sqm | 60 ₹36,000 | 54 ₹32,400 | 66 ₹39,600 |
| 2.00 | Demolishing plain cement concrete works by chiselling at all levels including scaffolding, disposal of materials within 50 metres lead etc. all complete as per specifications & as directed by Engineer in-charge. | 20 | Cum | 1,390 ₹27,800 | 1,818 ₹36,360 | 1,800 ₹36,000 |
| 3.00 | Demolishing brick work in cement mortar at all levels including scaffolding, stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead etc., all complete as per specifications & as directed by Engineer in-charge. | 3 | Cum | 1,110 ₹3,330 | 999 ₹2,997 | 1,710 ₹5,130 |
| 4.00 | Dismantling Old Plaster or Skirting, racking out joints and cleaning the surfaces for plaster including scaffolding, disposal of debris to the dumping ground within 50 metres lead etc., all complete as per specifications & as directed by Engineer in-charge. | 10 | Sqm | 50 ₹500 | 99 ₹990 | 50 ₹500 |
| 5.00Taking out DOORS, WINDOWS AND CLEARSTORY WINDOWS, shutters (steel or wood) including stacking within 50 metres lead etc. complete and as per drawings, specifications & as directed by the Engineer-in-charge. | ||||||
| 5.10 | Of area 3 m² & below | 69 | Each | 650 ₹44,850 | 225 ₹15,525 | 120 ₹8,280 |
| 6.00 | Scraping the walls and concrete surfaces at all level to remove existing white/colour wash, distemper, oil paint, oil bound distemper, acrylic emulsion paint or other similar finishes and making the surface smooth by repairing the scratch etc. including necessary scaffolding, cost of sand papers, steel scrapers, compatible scratch filler etc., all complete as per specifications and as directed by Engineer-in-Charge. | 270 | Sqm | 65 ₹17,550 | 27 ₹7,290 | 21 ₹5,670 |
| 7.00 | Lead charges for debris by mechanical transport upto 2.0 Kms in RRCAT CAMPUS, including loading, unloading, stacking/levelling etc., all complete as per specifications and as directed by Engineer-in-charge | 45 | Cum | 330 ₹14,850 | 351 ₹15,795 | 210 ₹9,450 |
| 8.00 | Dismantling/Removing carefully CI rainwater/drainage pipes of diameter 75 mm or 100 mm including removal/dismentaling of specials, lead/cement joints,clamps etc at all heights including scafolding, staking of serviceable materials at civil store, disposal of unserviceable materials etc complete all as per specifications and as directed by the Engineer-in-charge. | 282 | Rm | 65 ₹18,330 | 54 ₹15,228 | 70 ₹19,740 |
Tender Value
₹34 L
EMD Value
₹68,000
Closing Date
24 Nov 2025, 3:30 pmClosed
CHIEF ENGINEER, RRCAT, INDORE
CSD office, RRCAT, Rajendra Nagar, Indore
Renovation of toilets of various lab buildings in technical area and school building at colony area of RRCAT, Indore
2025_RRCAT_883591_1
RRCAT/Rev/96/CSD/3183/W4379/03
Open Tender
Civil Works
365 days
RRCAT
As per NIT
3 documents required · 3 mandatory
₹0
₹68,000
18 Dec 2025
3 Nov 2025
28 Nov 2025
4 Nov 2025
24 Nov 2025
4 Nov 2025
Amount
Imp. Note - a) The bidder must possess valid EPF & ESIC registration. The bidders need to deposit EPF & ESIC with appropriate authority. The reimbursement for EPF & ESIC deposit shall not be made. b) The payment of wages to labourers should be made through bank. c) The bidder must possess sufficient manpower & other resources (as detailed in SGF ) required for the timely completion of work.
Dismantling the Mosaic /white glazed /Ceramic /Vitrified tiles, Kotah stone etc. in flooring/dado/skirting etc. including dismantling of bedding mortar, stacking of materials and disposing of debris within 50 metres lead etc., all complete as per specifications & as directed by Engineer in-charge.
Demolishing plain cement concrete works by chiselling at all levels including scaffolding, disposal of materials within 50 metres lead etc. all complete as per specifications & as directed by Engineer in-charge.
Demolishing brick work in cement mortar at all levels including scaffolding, stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead etc., all complete as per specifications & as directed by Engineer in-charge.
Dismantling Old Plaster or Skirting, racking out joints and cleaning the surfaces for plaster including scaffolding, disposal of debris to the dumping ground within 50 metres lead etc., all complete as per specifications & as directed by Engineer in-charge.
Taking out DOORS, WINDOWS AND CLEARSTORY WINDOWS, shutters (steel or wood) including stacking within 50 metres lead etc. complete and as per drawings, specifications & as directed by the Engineer-in-charge.
Of area 3 m² & below
Scraping the walls and concrete surfaces at all level to remove existing white/colour wash, distemper, oil paint, oil bound distemper, acrylic emulsion paint or other similar finishes and making the surface smooth by repairing the scratch etc. including necessary scaffolding, cost of sand papers, steel scrapers, compatible scratch filler etc., all complete as per specifications and as directed by Engineer-in-Charge.
Lead charges for debris by mechanical transport upto 2.0 Kms in RRCAT CAMPUS, including loading, unloading, stacking/levelling etc., all complete as per specifications and as directed by Engineer-in-charge
Dismantling/Removing carefully CI rainwater/drainage pipes of diameter 75 mm or 100 mm including removal/dismentaling of specials, lead/cement joints,clamps etc at all heights including scafolding, staking of serviceable materials at civil store, disposal of unserviceable materials etc complete all as per specifications and as directed by the Engineer-in-charge.
Cutting holes up to 30 cm x 30 cm size in 240 mm thick plastered brick wall in cement mortar including scaffolding, disposal of unserviceable material within 500 mtr. lead and making good the wall with 20 mm thick,1:4 cement plaster,curing etc complete as per drawings, specifications and as directed by the Engineer-in-Charge
Providing waterproof BRICK BAT COBA for filling in the depression of toilets, bathroom etc., as per the specifications of specialised waterproofing agencies and finishing the surface even so as to be suitable to receive the tiles etc. complete as per specifications and as directed by the Engineer-in-Charge. Note : The measurement shall be on m³ basis. No deductions shall be made for the areas occupied by pans and other fittings and fixtures.
Waterproof cement plaster in cement mortar 1:3, with waterproofing compound @ 2% by weight of cement including double scaffolding, curing, hacking of concrete surfaces etc. complete as per specifications and as directed by the Engineer-in-Charge.
20mm thick
Providing & laying in position Cement concrete 1:3:6 using graded stone aggregate 40 mm max. size including consolidating, finishing, curing etc. complete excluding formwork all complete as per drawing, specification and as directed by Engineer in-charge.
Brick work in cement mortar 1:6 using table moulded chimney bricks having a compressive strength not less than 40kg/cm² in superstructure at all levels including double scaffolding, raking out joints, curing etc. complete as per specifications and as directed by Engineer-in-Charge.
Half Brick masonry using table moulded chimney bricks having a compressive strength not less than 40kg/cm² in partition walls in C.M. 1:4 at all levels, with stiffeners of reinforced cement concrete 1:2:4 (100mm x 100mm) size at every 900mm height including double scaffolding, raking out joints, form work for stiffeners, curing etc. complete as per specifications and as directed by Engineer-in-Charge. Note: Reinforcement will be measured and paid for separately under relevant item of schedule.
Non Slippery Ceramic tile flooring/dado using 6± 0.5 mm thick matt finished ceramic tiles of sizes as mentioned below, 1st quality of preferred make over 20mm thick cement mortar 1:3 bedding, close jointed and pointed with matching cement slurry using white cement pigment mixed with, finished to levels slope or plumb as required including 20mm thick cement mortar 1:3 bedding, making good the surface before bedding, cutting of tiles, curing, acid washing etc. complete as per drawing, specifications and as directed by Engineer-in-Charge.
For flooring using tiles of size 450x450mm and 300x300mm
For Dado/Skirting using tiles of size 300x450mm
Cement plastering at all levels for internal walls ceilings with cement mortar 1:4/1:5 over brick walls or concrete surfaces, including hacking of concrete surfaces, double scaffolding, curing etc. complete as per drawing, specifications and as directed by Engineer-in-Charge.
20 mm thick with cement mortar 1:4
Painting plastered surfaces with two/three coats of Acrylic emulsion paint of approved shade and make over one coat of approved cement primer including preparing the surfaces, filling with full wall putty, scaffolding and cleaning, tools & tackles, safety appliances etc. complete as per specifications and as directed by Engineer-in-Charge.
Two finishing coats over a coat of primer
Providing & fixing EUROPEAN WATER CLOSET suite comprising of :
a. White vitreous china pedestal type water closet (European type W.C. pan of preferred make) in vitreous Chinaware with internal 'P' or 'S' trap conforming to IS: 2556 of preferred make
b. PVC, low level flushing cistern 9+1 litres capacity of preferred make, mounted brackets with double syphonic pattern and all internal fittings conforming to IS: 7231.
c. 15mm n.b. heavy quality P.V.C. inlet connection with brass unions connected at ends.
d. 15mm n.b. screw down heavy quality, fancy variety C.P. brass Two nos. stop cock of preferred make & conforming to IS:8931.
e. Solid plastic heavy quality seat with lid of preferred make and colour with C.P brass pillar hinges, conforming to IS :2548 (Part I and II)
f. Health faucet (Hand Shower) with 8mm dia. 1.2 metre long Flexible tube & wall hook of preferred make with two way bib cock.
g. Jet spray (butterfly) with 1.00m long heavy quality PVC tube & nozzle of preferred make.
Providing and fixing approved ORISSA PATTERN W.C. SUITE comprising of :
a. Orissa pattern W.C. best Indian make white or colour glazed vitreous chinaware, size 580 mm x 400mm with ‘P’ or ‘S’ trap, of approved make conforming to IS: 2556
b. PVC low level flushing cistern 9+1 litres capacity of preferred make, mounted brackets with double syphonic pattern and all internal fittings conforming to IS: 7231.
c. 32mm n.b. heavy quality P.V.C /SS flush pipe of appropriate length with all PVC specials, etc.
d. 15mm n.b. screw down heavy quality, fancy variety C.P. brass Two nos. stop cock of preferred make & conforming to IS:8931.
e. 15mm n.b. screw down heavy quality, fancy variety C.P. brass stop cock of approved make. conforming to IS:8931.
Providing and fixing C.P. brass Toilet paper roll Holder of preferred make fixing on wall using C.P. brass screws, rawl plug etc all complete as per specifications and as directed by Engineer-in-Charge.
Providing and fixing large flat back half stall Urinal of size 610mmx400mmx380mm of preferred make supported on suitable wall brackets with 32mm n.b. heavy quality approved make C.P. brass bottle trap with extension piece and wall flange suitable heavy quality C.P. brass waste coupling including C.P. dome grating etc. complete as per specifications and as directed by Engineer-in-Charge.
Providing and fixing 15mm n.b. heavy quality C.P. brass flushing valve with Copper pipe & checknut of preferred make on CPVC/G.I. line for flushing urinals of approved quality etc. all complete as per specifications and as directed by Engineer-in-Charge.
Providing & fixing best quality wash basin of size 550mm x 400 mm with plain rims, comprising of :
a. Best Indian make wash basin in white glazed vitreous chinaware of preferred make conforming to IS:2566 Part IV supported on suitable wall brackets and of size mentioned above.
b. One number heavy quality 15mm n.b. C.P. brass pillar cock of foam flow aerator type with jam nut of easy clean variety and of preferred make conforming to IS: 1795
c. One number 15 mm n.b. heavy quality PVC inlet connection with brass union connection with brass solder joints at ends.
d. One number 15 mm n.b. heavy quality easy clean variety C.P. brass screw down stop cock conforming to IS : 781
e. One number 32 mm n.b. heavy quality C.P. brass waste coupling.
f. One number 32 mm C.P. BRASS heavy quality BOTTLE trap of preferred make with extension piece and wall flange etc. complete of Dripless type.
Providing and fixing in position beveled or plain edge mirror of size 600x450 mm made out of best indian glass of 5.5 ± 0.5mm thick, manufactured by approved make mounted on PVC sheet backing with decorative PVC frame fixed in position with C.P. brass screws wth rawl plugs etc. complete as per specifications and as directed by Engineer-in-Charge.
Providing and fixing heavy quality C.P. brass screw down 15mm n.b. Bib taps of preferred make on G.I./CPVC pipe line conforming to IS:781. All complete as per specifications and as directed by Engineer-in-Charge.
Providing & fixing stainless steel look metallic shelf of length 550 mm,width 140 mm and height 70 mm of preferred make including 6 mm thick clear glass, two tier 6 mm railing, four pillars in a good looking pattern with diameter varying from 6 mm to 16 mm and two brackets such that whole assembly weighs not less than 300 grammes including fixing in position using rawl plugs, gutties, hardwares etc complete all as per specifications and as directed by the Engineer-in-charge.
Providing and fixing heavy quality fancy variety C.P. brass screw down 15mm n.b. Angular Stop cocks of approved make confirming to IS:8931 on G.I./CPVC pipeline. All complete as per specifications and as directed by Engineer-in-Charge.
Providing and fixing HDPE/PVC Floor trap of self cleansing design with 75mm outlet having a minimum water seal of 50mm with stainless steel grating on top of preferred make including necessary 1:2:4 cement concrete for embedding the trap etc. all complete as per specifications and as directed by Engineer-in-Charge.
Providing, laying, jointing, fixing and testing PVC rigid pipes of class 'B' of preferred make for sewerage ensuring thermal stability for waste water, sewage, acids etc. including all PVC fittings, jointing with durable solvent, testing the pipes at a pressure of 6 Kg per Sq cm etc. complete as per drawing, specifications and as directed by the Engineer-in Charge.
Providing, laying, jointing, fixing and testing CPVC pipes of preferred make of grade SDR - 11 as per IS:15778 including CPVC plain & brass threaded fittings like elbows, collars, tees, unions, couplings, reducers, enlargers, bends, CPVC MTA, FTA and all other fittings required for the completion, having thermal stability for hot & cold water supply and also as per the code of practice of water supply in buildings of IS: 2065 including laying under the floors, chasing in walls, roof slabs and making good the same to the original conditions, including fixing the pipe with clamps at 1m spacing, cost of all jointing materials like hemp yarn, white or red lead, clamps, wooden gutties, screws, cement, sand etc. complete testing the pipes with clean water complete as per specifications and as directed by Engineer-in-charge.
20mm nominal size
25mm nominal size
32mm nominal size
Providing and fixing in position heavy pattern screw down gun metal GATE VALVEs of preferred make conforming to IS:778 with hand wheels at top including testing for 10 kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc. as per specifications and as directed by Engineer-in-charge.
Providing and fixing in position liquid soap dispenser of preferred make with C.P. brass brackets, cap etc. fixed to wall with C.P. screws and rawl plugs all complete as per specifications and as directed by Engineer-in-charge.
Providing and fixing C.P. brass Towel rods of preferred make of size 600mm long x 19±1mm with a wall flanges fixing on wall using C.P. brass screws, rawl plug etc all complete as per specifications and as directed by Engineer-in-charge.
Providing and fixing in position anodized (min of grade AC 5) / powder coated (min 50 microns) Fixed window with extruded and integrated aluminum sections as per approved make conforming to IS: 733 and IS: 1285 aluminum beading, PVC lining, CP brass / stainless steel screws, mastic filling, nuts, washers etc. complete including cost of 5mm thick float glass, Neoprene gasket, scaffolding if necessary, chipping of walls, beams, columns, rectification of plaster, painting if required etc. complete as per specifications and as directed by Engineer-in-charge.
With anodized aluminum section (min of grade AC 5) of approved shade
Providing and fixing in position anodized (min of grade AC 5) aluminum louvered ventilators using aluminum alloys extruded section as per approved make confirming to IS: 733 and IS: 1285. The outer frame shall be of extruded aluminum verticle and horizontal rectangular sections of minimum size 44.0x46.0x1.40 mm thick with adjustable louvers clips on both vertical side to hold and rotated 4mm thick bajri glass strip louvers, C.P. brass screws / stainless steel screws, mastic filling, nuts, washers, Rawl plugs, aluminum packing strips used for anchoring system as per the requirements, transportation, cost of all labours, scaffolding if necessary, machinery, tests, chipping of walls, beams, columns, rectification of plaster, painting if required etc. and as directed by EIC. Including providing and fixing bajri glass of 4.0 mm thickness etc. complete as per specifications and as directed by Engineer-in-Charge.
Providing and fixing in position 16 G Sheet single rebated door frames at all levels of size 105x60mm, made up of preferred make cold rolled framed profile of pressed steel conforming to IS:513 and general specification of IS:4351 including temporary steel base ties for frames to hold in position duly fabricated with iron hinges as per specification duly fixed to frames and hold fasts 40 mm x 5 mm, M.S. flat, 200 mm long fitted to frames including hallow portion back filled with cement concrete 1:2:4 including the cost of lock stricke plate and arrangement of tower bolt etc., painting with two coat of enamel paint of approved shadfe & make over a one coat of approved make steel primer etc. complete as per specifications and as directed by Engineer-in-charge.
Providing, fabricating, supplying and erecting in position both side laminated flush door shutters of following thicknesses (excluding the thickness of lamination) in solid block board core, internally lipped, bonded with water proof type synthetic resin, hot pressed with commercial ply finish and decorative plastic laminate of preferred make of 1 mm thickness on both faces including providing and fixing aluminum, CPMS fittings and fixtures as per drawing, heavy duty stainless steel hinges, locking arrangements and Godrej make door closure with screws etc. complete as per specifications and as directed by Engineer-in-Charge.
35mm thick (excluding the thickness of lamination)
Providing and fixing factory made 30 mm thick pre laminated PVC door shutter (conforming to IS: 4020) with PVC door Frame (Choukhat) of preferred make consisting of followings :
1. PVC door frame of size 50x47mm with wall thickness of 5mm, made out of extruded 5mm thick rigid PVC foam sheet, mitred ar corners and joined with 2nos. 150mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specifications and as directed by Engineer-in-Charge.
2. PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and of size 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacturer, M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 95 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, panelling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive & including all fittings, fixtures & 4 nos. 100 mm long heavy duty S.S. hinges etc. complete as per manufacturer's specification & as directed by Engineer-in-charge.
Providing and fixing best quality approved colour and shade MARBLE PARTITION slab 12 to 14 mm thick and of size 1000mm x 650mm, polished on both sides, machine cut edges with rounded exposed corners including fixing in wall after cahsing with cement mortar or adhesive in proper level and line etc. all complete as per specifications as directed by Engineer-in-Charge.
Shree Sawaria Construction (BID ID -3322043)
j k enterprises (BID ID -3321393)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.86 MB
ScheduleB.pdf
Tender Documents • 0.10 MB
CivilSpecifications.pdf
Tender Documents • 2.43 MB
Conditions.pdf
Tender Documents • 2.49 MB
SGF4379.pdf
Tender Documents • 1.12 MB
preferredmake.pdf
Tender Documents • 0.13 MB
NIT.pdf
Tender Documents • 0.85 MB
BOQ_928726.xls
BOQ • 0.32 MB
PHSpecifications.pdf
Tender Documents • 1.40 MB
ScheduleA.pdf
Tender Documents • 0.13 MB
Download all tender documents and submit your bid