86111REPAIRS TO INTERNAL ROADS AT OTHER THAN AFMC UNDER GE (CENTRAL) PUNE.

Amount

M&L for repair to pot holes any depth, n.exc. 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in road paths etc, cutting around edges to at least 25 mm in depth making good by filling in screened and graded road metal applying tack coat with Bituminous primer (of bitumen grade VG-10) @ 5 kg per 10 sqm, putting in bituminous (of bitumen grade VG-30) pre-mix asphaltic semi dense concrete (design mix) 25 mm (consolidated thickness) with 5.5% binder content by weight of total mix, laid with mechanical paver, rolled and compacted to required camber and gradient with 8 to 12 tonne power roller complete all as specified and as directed.

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dust/dirt etc. and applying evenly a priming / tack coat with paving bitumen (VG-30 grade ) @ 5.0 kg per 10 sqm on black top surface and providing and laying bituminous premixed semi dense asphaltic concrete 30 mm thick (consolidated thickness) with 5.5% paving bitumen of grade VG-30 , binder content by weight of total mix , rolled and compacted to required gradient & camber using 8 to 12 tonne power roller complete all as specified and directed.

M&L for preparation of black top surfaces of road and applying 2.0 mm thick retro-reflective thermoplastic road marking paint, as lines, dashes, arrows, letters etc on roads, pavements and the like exc 10 cm width, by mechanical machine, white or golden yellow complete all as specified and as directed.

S&F high intensity ABS Plastic road stud of size varying from 100x100x20mm to 110x90x17mm and colour of body amber, red or white, two way reflective 180 degree and fixing stud with approved high intensity thermoplast adhesive bond & nailing the same on specified section of the road with MS anodised pin of standard pattern of manufactures 8 x 37mm long including cutting making holes on road for proper fixing of the same complete all as specified and as directed.

M&L for Rough excavation n exc 1.5 m deep and getting out in soft / loose soil complete all as directed.

Removing excavated material exc 250 m but n exc 500 m and depositing where directed.

M&L forming embankments including raising (or loweing) earth , spreading in layer n exc 30 cm thick , watering, raming / rolling and finishing to required size , shape etc n exc 1.5 m high from base all as per specified and directed.

MOHANLAL MATHRANI CONS. PVT. LTD.

Sunshine Ventures