Fabricated shed at ramleela club dadwara

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: EXECUTIVE ENGINEER REW DIVISION KATHUA

Name of Work;- construction of Fabricated shed at Ramleela club Dadwara Pyt. :- Lower Bhaddu Block Billawar District Kathua under Development Scheme (CDS) for the year 2025-26 ESTT AMOUNT 4.88 LACS

Contract NO:- MLACDF 2025-26

Name of the Bidder/ Bidding Firm / Company :

S. No. Item Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT in Rs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

Earth work in excavation by manual means in trenches for foundation drains pipes cables etc (not exceeding 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. 2.29 cum 479.3 1000 Excess(+) Full Conversion INR INR One Thousand &Ninety Seven and Paise Sixty Only 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 0.93 cum 5733.6 1000 Excess(+) Full Conversion INR INR Five Thousand Three Hundred & Thirty Two and Paise Twenty Five Only

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete. 8.92 sqm 286.35 1000 Excess(+) Full Conversion INR INR Two Thousand Five Hundred & Fifty Four and Paise Twenty Four Only

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 2164 kg 156.95 1000 Excess(+) Full Conversion INR INR Three Lakh Thirty Nine Thousand Six Hundred & Thirty Nine and Paise Eighty Only

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 183.82 sqm 706.5 1000 Excess(+) Full Conversion INR INR One Lakh Twenty Nine Thousand Eight Hundred & Sixty Eight and Paise Eighty Three Only

Add provision for pedestal including fibre plate as a foundation stone 1 no. 10000 1000 Excess(+) Full Conversion INR INR Ten Thousand Only

Total in Figures Excess(+) Full Conversion INR INR Four Lakh Eighty Eight Thousand Four Hundred & Ninety Two and Paise Seventy Two Only 4 Construction of chamber for 100mm sluice plates item5 10 Nos

Please Enable Macros to View BoQ information