CERTAIN REPAIRS TO PLUMMBING, JOINERY AND CONNECTED WORKS AT AFMSD KANDIVALI, HBTC MARVE AND MALAD, CERTAIN REPAIRS TO B/R WORKS TO BUILDING AT HBTC MARVE UNDER GE (N) SANTACRUZ

Amount

Demolition of brick work/stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge.

Material and labour for brick work with sub class 'B' bricks, straight or curved on plan, exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

Material and labour for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius, in half brick thick walls with old size bricks, built in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge

Taking down cement plaster on brick or stone walls, ceilings etc., without disturbing brick work, including raking out joints, hacking for key, scrubbing down with water and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge

Material and labour for 10 mm thick rendering in Cement Mortar (1:4) on internal wall surface including dubbing out plaster in Cement Mortar (1:6) of any thickness & finishing the surface even & smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for rendering 15mm thick plaster in cement mortar (1:4) on external surfaces of the brick, PCC block or concrete surfaces, including dubbing out plaster in Cement Mortar (1:6) of any thickness and mixed with waterproofing compound @ 3% by weight of cement or as per manufacturer's instructions and finishing the surfaces even and smooth without using extra cement , upto the height of bldg roof including necessary formwork/ scaffolding /ladders and safety belt etc complete all as specified and as directed by Engineer-in-Charge.complete all as specified and as directed by Engineer-in-Charge. Note: waterproofing compound shall be measured and paid separately

Supply only integral water proofing compound ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Pidilite Industries Ltd, Taloja /Super Aquacem (India) Ltd /FOSROC/Siko/Dr Fixit

Material and labour for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper with roller over a coat of alkali resistant wall primer complete all as specified and as directed Make : Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints

Material and labour for preparation of wall surfaces and applying 1.5mm thick wall care putty complete to smoothen the underneath surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Asian Paints / Nerolac Paints /Jenson & Nicholson / Shalimar Paints / JK wall care putty

Material and labour for new plastered wall surface and applying two coats of Acrylic weather proof coat 100% exterior grade paint over one coat of acrylic primer upto a height of bldg roof including formwork/scaffolding/ladders and safety belts with precautions etc complete all as specified and as directed by Engineer-in-Charge. Make : APEX ULTIMA” of Asian Paints/ “WEATHER COAT ALL GUARD” of Berger Paints/"EXCEL TOP GUARD” of Nerolac/ “DULUX WEATHERSHIELD MAX” of ICI India

Material and labour for preparation of new plastered surfaces of wall & applying two coats of cement based paint over a coat of primer complete all as specified and as directed by Engineer-in-Charge. Make : Snowcem/Duracem/Aquacem/Berger/Shalimar

Taking down shutter carefully, area exceeding 1.0 sqm but not exceeding 2.0 sqm each including all fittings etc & removing clear off site after credit is recovered by Dept complete all as specified and as directed by Engineer-in-Charge

Taking down shutter carefully, area not exceeding 1.0 sqm each and refixing in the same opening complete all as specified and as directed by Engineer-in-Charge Note- Renewal of builder's hardware articles, if specially ordered, shall be paid seperately.

Taking down shutter carefully, area exceeding 1.0 sqm but not exceeding 2.0 sqm each and refixing in the same opening complete all as specified and as directed by Engineer-in-Charge Note- Renewal of builder's hardware articles, if specially ordered, shall be paid seperately.

Resecuring or easing and adjusting without taking down shutters of any description not exceeding 1 sqm each including all fittings etc complete all as specified amd as directed by Engineer-in-charge.

Resecuring or easing and adjusting without taking down shutters of any description exceeding 1 sqm and not exceeding 2 sqm each including all fittings etc complete all as specified amd as directed by Engineer-in-charge.

Welding in repairs exc 2.5cm but not exc 5cm thick of metal not exc 6cm etc complete all as specified as directed

Taking down of chowkats or frames not exceeding 1.5sqm each with shutters (without taking off shutters from the frames) & removing clear off site after credit is recovered by Dept complete all as specified and as directed by Engineer-in-Charge

Taking down of chowkats or frames exceeding 1.5sqm but not exceeding 4.0sqm each with shutters (with out taking off shutters from the frames) & removing clear off site after credit is recovered by Dept complete all as specified and as directed by Engineer-in-Charge

Supply and fix factory made plain framed panelled shutter 35mm thick 2nd class hardwood rail and style (three panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-Charge. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pdts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA)

Supply and fix 35mm thick factory made 2nd class hard wood glazed and skelton shutter, open rebated, prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutter as specified in SSR Part-I section 8, clause No 8.24 (b) complete all as specified and as directed by Engineer-in-Charge. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pvts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA)

Supply and fix 30mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both side complete all as specified and as directed by Engineer-in-Charge. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pdts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA)

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing on Serial Page No 151 & 180 of SSR Part II (pertaining to item No 08095) and edges to be painted to match with prelam sheet complete all as specified and as directed by Engr-in-Charge. Make : RAJSHRI / SINTEX / TUFFFLON / M/s Navratan Specialty Chemical LLP – ‘Brand : GIZA’

Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of M. S. tubes for top & bottom rails. M.S. frame shall be covered with heat molded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specification & drawing on Serial Page No 149 & 176 of SSR Part II (pertaining to item No 08080) including necessary aluminium builders hardware for one door to be provided such as 100mm dia butt hinges - 3Nos, tower bolt 200mm dia - 2Nos, handle 200mm long - 2 Nos etc complete all as specified and as directed by Engineer-in-Charge. Make : RAJSHRI / SINTEX / TUFFFLON / M/s Navratan Specialty Chemical LLP – ‘Brand : GIZA’

Supply & Fix Factory made single extruded WPC (wood polymer composite) soild door/ window/ ceosetory windows & other frames/chowkhat of size 50 x 100mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with minter joints after applying PVC solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(face) and 1100 N(edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 n/mm2 and resisitance to spread of flame of class A catgory with property of being termite/borer proof water/moisture proof and fire resistant and fixed in position with MS hold fast/lugs/ SS dash fastners of required dia and length complete all as specified as directed by Engineer-in-charge. Note: M/S hold fast or SS dash fastners shall be paid for separately. Make: Rajashri/Giza/Echon/Floresta

Supply & Fix Factory made single extruded WPC (wood polymer composite) soild door/ window/ ceosetory windows & other frames/chowkhat of size 65 x 125mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with minter joints after applying PVC solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(face) and 1100 N(edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 n/mm2 and resisitance to spread of flame of class A catgory with property of being termite/borer proof water/moisture proof and fire resistant and fixed in position with MS hold fast/lugs/ SS dash fastners of required dia and length complete all as specified as directed by Engineer-in-charge. Note: M/S hold fast or SS dash fastners shall be paid for separately. Make: Rajashri/Giza/Echon/Floresta

Supply & Fiix Factory made single extruded WPC (wood polymer composite) soild decorative type flush door shutter of size 30mm thick comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) and having minimum density of 650 kg/cum, screw withdrawal strength of 1800 N(face) and 900 N(edge), minimum compressive strength of 50 N/mm2, modules of elasticity 900 n/mm2 and resisitance to spread of flame of class A catgory with property of being termite/borer proof water/moisture proof and fire resistant WPC to be laminated with pvc foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with SS butt hinges of required size with necessary full body threaded star headed counter sunk ss screws complete all as specified as directed by Engineer-in-charge. Note: SS butt hinges and SS screws shall be paid seprately. Make: Rajashri/Giza/Echon/Floresta

Supply & Fiix Factory made single extruded WPC (wood polymer composite) soild decorative type flush door shutter of size 35mm thick comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) and having minimum density of 650 kg/cum, screw withdrawal strength of 1800 N(face) and 900 N(edge), minimum compressive strength of 50 N/mm2, modules of elasticity 900 n/mm2 and resisitance to spread of flame of class A catgory with property of being termite/borer proof water/moisture proof and fire resistant WPC to be laminated with pvc foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with SS butt hinges of required size with necessary full body threaded star headed counter sunk ss screws complete all as specified as directed by Engineer-in-charge. Note: SS butt hinges and SS screws shall be paid seprately. Make: Rajashri/Giza/Echon/Floresta

Supply & Fix 30mm thick "FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER" decorative type consisting of density 600 kg/cum manufactured by an ISO 9001-2015 certified company, door to be panelled with SS mosquito mesh and XTN aluminium mesh for additional strength and saftey purpose (confirming as per IS 4020) the door should be water proof, termite proof, fire resistant and having screw holding capacity door to be fixed with 3 nos. MS powder coated butt hinges size 100x2x32mm long steel screws drilled suitable to pass through both the walls of the MS tube other hardwares should be fixed with 19x6mm size steel screws etc. complete as per direction of Engineer-in-charge, manufactures specification and drawing. Make: Rajashri/Giza/Echon/Floresta

Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-charge.

Supply and fix factory pressed steel frames made out of mild steel black sheet 1.25mm thick of profile 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including shop coat of primer and threshold of 12mm dia round bar 1 No welded at bottom of frame etc., complete all as specified and as directed Make:M/s Madhu Industries, Jangid Engineering Jaipur, Decan Structural Pvt Ltd Bangaluru, Chandni Industries, Ashwani & Sons, Anoop Industries,Trisul Industries, Ashish Industries

Supply and fix floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring 150mm size, complete all as specified and as directed. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix aluminium anodised barrel tower bolt of extruded section size 200mm complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix aluminium anodised barrel tower bolt of extruded section size 150mm complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix extruded aluminium alloy handles fabricated types, anodised, of size 150 mm long complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix stainless steel butt hinges, medium weight, 100mm size all as specified and directed. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix aluminum anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 250mm long, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix aluminum anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 300mm long, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix plain solid straight chowkats, second class hardwood, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints including making good in cement concrete in frame complete all as specified and as directed by Engineer-in-Charge.

Supply and fix mild steel work as in hold fast & similar small articles, conforming to Fe-290 Gde-E-165 complete all as specified and as directed by Engineer-in-Charge.

Material and labour for plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, holstring courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, kerbs, water troughs, bed plates, concrete block for hold fast etc and the like including necessary form work for fair finished surfaces including weathering, slightly rounded or chamfered angles and throating, as directed etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparing new wood surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge. Make : Asian paints/ Nerolac paints/Berger paints/ Shalimar paints/ Dulux

Material and labour for preparing old wooden surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. Make : Asian paints/ Nerolac paints/Berger paints/ Shalimar paints/ Dulux

Supply and fix 15 micron coloured aluminium sections for sliding (3 Track) or openable windows, ventilators, doors, partitions etc including fabrication of frame & shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc including all accessories such as glazing clips and rubber beadings for fixing glass panes / wire mesh in frame complete all as specified and as directed by Engineer-in-Charge. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India Note: (i) Glass panes /wire mesh will be measured & paid separately. (ii) Rubber beading will not be weighed.

Supply and fix 4.0mm thick black glass, ordinary quality in square exceeding 0.5 Sqm in each pane, fixed in aluminium windows complete all as specified and as directed by Engineer-in-Charge. Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain

Supply and fix 4.0mm thick figured glass, pin headed type ordinary quality fixing with oil putty and glazing clip, in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge. Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain

Supply and fix in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer-in-Charge

Supply and fix 15 micron coloured aluminium anodised grill of design No DG-101 of Decogrille or equivalent , cut to required size/shape, and fixed in position with and including aluminium beading and frame complete all as specified and as directed by Engineer-in-Charge. Make: DECOGRILLE of Associated group / Royal Alum grill Pvt Ltd or equivalent make as approved by GE

Material and labour for MS framed work such as grills , gratings, etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, framed work of garbage bin, barred iron doors, ladders, framed balusters, walk ways, railings, framework of watertanks and similar work conforming to FE 290 Gde 165 etc. complete all as specified and as directed by Engineer-in-Charge.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing),depositing debris out side MD land complete all as specified and as directed by Engineer-in-Charge.

Material and labour for non skid coloured ceramic tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 15mm thick in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Orient bell / M/s RAK tiles

Material and labour for non skid coloured ceramic tiles, 7 to 8mm thick (square/ rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 15mm thick in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Orient bell / M/s RAK tiles

All as per item no.52 described here-in-before but in skirting/dado including 10mm thick cement mortar 1:4 backing coat etc complete as specified and as directed by Engineer-in-charge.

Material and labour for coloured glazed ceramic tiles of size 350mm x 250mm x 7 mm thick / 450mm x 350mm x 7mm, on vertical surfaces etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 10mm thick backing coat in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Orient bell / M/s RAK tiles

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry or laid dry and pointed and removing debris out outside md land complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 20-25 mm thick machine cut cudappa stone slab in jambs / cills / soffits of window / ventilator as in frame work to support for aluminium section, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete over backing coat 10 mm thick in CM (1:4)complete all as specified and as directed by Engineer-in-Charge.

Material and labour marble work 20 mm thick makrana colour /white marble machine cut on kitchen cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2), using marble dust with admixture of pigment to match with marble shade of makrana white over 20mm thick screed bed in cement mortar (1:4) complete all as specified and as directed

Supply and fix in repair, health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook, including making connection and fixed in position complete all as specified and as directed by Engineer-in-Charge. Make : CERA/ Hindustan/Parryware/Jaguar/Hindware/ Johnson

Supply and fix in repairs mild steel tubing medium grade 15mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including making good disturbed surfaces as per existing surfaces using cement mortar (1:3)complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith

Supply and fix in repairs mild steel tubing medium grade 20mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including making good disturbed surfaces as per existing surfaces using cement mortar (1:3)complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith

Supply and fix in repairs mild steel tubing medium grade 25mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including making good disturbed surfaces as per existing surfaces using cement mortar (1:3)complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith

Supply and fix in repairs, concealed stop valve, cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mm bore complete all as specified and directed by Engineer-in-Charge Make : Jaquar (Essco)/Prayag / Seiko

Supply and fix in repairs 15mm bore bib taps, fancy type, chromium plated, cast copper alloy, with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed by Engineer-in-Charge. Make : Jaquar (Essco)/Prayag / Seiko

Supply and fix in repair Swivel Shower of PTMT, 125mm, any colour for fixing with 15 mm pipe (Minimum weight 40gms) complete all as specified and as directed by Engineer-in-Charge. Make : Prayag / R.S. Industries (POLYTUF)

Supply and fix in repairs 15mm brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge. Make: Jaquar, Marc,CERA,Kohler, Player, Soma, Leade Zoloto

Supply and fix in repairs, PVC Nahani trap,75 mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc, complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Supreme / Finolex

Supply and fix in repairs UPVC floor trap 75mm with grating including jointing with waste pipe Complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Finolex / Supreme

Supply only 32mm, waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs brass chromium plated towel rail, 20mm dia, D type, 60cm long, between flanges complete all as specified and as directed by Engineer-in-Charge. Make : Crown / Jindal / Essess / Swastik

Supply and fix stainless steel kitchen plate rack made out 1mm thick of size 900mmx600mmx200mm including fixing with rawl plug screws complete all as specified and as directed by Engineer-in -charge. Make- Blue Star Cat No. KPR-313/KPR-314 or equivalent of Nirali/Parryware

Supply and fix in repairs gun metal globe/ gate valve, 25mm bore, with iron wheel head, screwed both ends for iron pipes, ISI marked and fixed with suitable size of new union, nipple and reducer complete all as specified and as directed by Engineer-in-Charge. Make : Leader/Zoloto/Seiko/Sant/ Essco/Prayag

Supply and fix in repairs gun metal globe /gate valve, 20mm bore, with iron wheel head, screwed both ends for iron pipes, ISI marked and fixed with suitable size of new union, nipple and reducer complete all as specified and as directed by Engineer-in-Charge. Make : Leader/Zoloto/Seiko/Sant/ Essco/Prayag

Dismantling of wall and ceiling board (fibre, pulp, insulation etc) or insulation boards/slabs/blankets of any type & any thickness including cover fillets & removing clear off site complete all as specified and as directed by Engineer-in-Charge.

Supply and fix anodised aluminium snap grid frame work for false ceiling conforming to IS 733, IS 737 and IS 1285 including all ceiling cleats, 4 mm dia GI wire suspender with necessary main tee 35.00 x 23.50 x 1.50mm, cross tee and wall angle of size 23.50 x 23.50 x 1.5 mm with 605 x 605 mm grid system including exposed metal frame ceiling with 8mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fiber for fixing in 600 x 600 mm grid system with all connected accessories suitably placed in false ceiling grid as per manufacture instruction complete with necessary design in single/double complete all as specified and as directed by Engineer-in-Charge. Make: Gypsum board /Arm Strong/Ramco/Bisan

Material and labour for 1.25mm thick steel rolling shutters, with ball bearing, gear operated type with bevel gear box and crank handle, safety lever locks mild steel with 4 levers as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position etc complete all as specified and as directed by Engineer-in-Charge. Make : M/s Swastik Rolling Shutters, Mumbai / M/s Shree Lakshmi Engg Wks, Bangalore / M/s Senthil Rolling Shutters & Engg Co, Chennai / M/s Jayaraj Industries, Chennai

Material and labour for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by Engineer-in-Charge. Make : Asian paints/ Nerolac paints / Berger paints / Shalimar paints / Dulux

Material and labour for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper with roller over a coat of alkali resistant wall primer over 3mm thick layer of wall care putty complete all as specified and as directed Make of Distemper: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints Make of Putty: Asian Paints / Nerolac Paints /Jenson & Nicholson / Shalimar Paints / JK wall care putty

Supply & Fix in repairs angle cock with wall flange, bore dia pipe 15mm complete all as specified and as directed by Engineer-in- Charge. Make : CERA catalogue No. F1003201or equivalent in Hindustan/ Parryware/ Jaguar/ Hindware/ Johnson

Supply & Fix in repairs snow white one piece EWC model name CASINO 660x350x760 S trap 220mm with soft close seat cover, incl. fixing with crew/bolts complete all as specified and as directed by Engineer-in- Charge. Make : CERA catalogue No. S1013149 or equivalent in Hindustan/Parryware/Jaguar/Hindware/ Johnson

Supply & Fix in repairs table top wash basin snow white, excluding taps, chain and plug and porcelain stopper but incl. waste coupling complete all as specified and as directed by Engineer-in- Charge. Make : CERA catalogue No. S2020102 CAMPA 550X400X160MM size. or equivalent in Hindustan/Parryware/Jaguar/Hindware/ Johnson

Supply & Fix single lever basin mixer with 305mm extended body and 600mm branded connecton pipe bore dia of 15mm complete all as specified and as directed by Engineer-in- Charge. . Make : CERA catalogue No. F1016452 or equivalent in Hindustan/Parryware/Jaguar/Hindware/ Johnson

Supply & Fix bib cock with flange and aerator bore dia of 15mm complete all as specified and as directed by Engineer-in- Charge. . Make : CERA catalogue No. F1003151 or equivalent in Hindustan/Parryware/Jaguar/Hindware/ Johnson

Supply & Fix 2 way bib cock with side handle, flange and aerator bore dia of 15mm as in repairs complete all as specified and as directed by Engineer-in- Charge. Make : CERA catalogue No. F1003161 or equivalent in Hindustan/Parryware/Jaguar/Hindware/ Johnson

Supply & Fix health faucet brass body with wall hook and 1 mtr SS braided rubber hose pipe complete all as specified and as directed by Engineer-in- Charge. Make : CERA catalogue No. F8030301or equivalent in Hindustan/Parryware/Jaguar/Hindware/ Johnson

Supply & Fix Toilet paper holder with flap guard complete all as specified and as directed by Engineer-in- Charge. Make : CERA catalogue No. F50021110 or equivalent in Hindustan/Parryware/Jaguar/Hindware/ Johnson

Supply & Fix Towel ring CP complete all as specified and as directed by Engineer-in- Charge. Make : CERA catalogue No. F5002105 or equivalent in Hindustan/Parryware/Jaguar/Hindware/ Johnson

Supply & Fix soap dish CP complete all as specified and as directed by Engineer-in- Charge. Make : CERA catalogue No. F5007106 or equivalent in Hindustan/Parryware/Jaguar/Hindware/ Johnson

Supply & Fix corner glass shelf (medium) complete all as specified and as directed by Engineer-in- Charge. Make : CERA catalogue No. F5005102 or equivalent in Hindustan/Parryware/Jaguar/Hindware/ Johnson

Supply & Fix PVC waste pipe flexible for wash hand basin any size complete all as specified and as directed by Engineer-in- Charge.

Supply & Fix powder coated Stainless Steel peg set of six complete all as specified and as directed by Engineer-in- Charge.

Supply and fix in repair vitreous china bowl urinal, flat back, size 465 x 355x 265 mm white (minimum), with grating and urinal for discharge pipe, waste pipe complete including providing and fixing plugs, bedding urinal against wall in CM securing urinal to plugs with and including 60mm long brass screws, pointing around, fixing cistern with brackets, flush pipe grating and union for discharge pipe complete all as specified and as directed by Engineer-in-Charge. Make: Parryware/Cera(Iquality)/Jaguar/Hindware/Johnson

Material and labour for surface preparation of existing concrete components including griding/rubbing carefully by grinder without damaging the existing concrete including cleaning the surfaces by blower , removal of external plaster wherever exists, cost inclusive of transportation, labour conveying debris away from the Defence land, tools and tacklers, lead and lift and clean water thoroughly complete all as specified and directed by Engr-in-Charge.

Demolition of reinforced cement concrete of any description (beam, chajja, fins, RCC water tank, roof slab etc) & in any position including necessary scaffolding arrangement (reinforcement cut as required to facilitate demolition) and removing concrete debris and depositing outside MD land all as specified and as directed by Engineer-in-Charge.

Supply and fix TMT bars, 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. Note: Cutting of rusted reinforcement & welding shall be inclusive in this item of work

Supply and fix TMT bars, 8 to 10mm dia in stirrups, spacers and binder, cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. Note: Cutting of rusted reinforcement & welding shall be inclusive in this item of work

Supply & fix MS/TS dowel pins/staple/shear pins including drilling holes in concrete and providing labour but excluding the materials for grouting the pins etc complete all as specified and as directed by Engineer-in-Charge.

Material & labour for repairing of damaged concrete portion by using superfluid dual shrinkage compensated structural grade M-40 micro concrete of at all levels with all leads and lift as directed including mixing, laying, levelling, finishing and curing complete all as specified and directed by Engineer-in-Charge. Make: Fosroc / SIKA / BASF / Krishna Conchem or equivalent approved .

Material and labour for formwork using steel shutters or 12mm marine ply to have the smooth finish to pour the micro concrete/ concrete including de-shuttering etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for providing and applying rust cleaner to exposed corroded reinforcement of approved make over prepared reinforcement, including removing concrete all around reinforcement including from behind the reinforcing bars by manual methods such as hammering the rebar, using wire brushes, chiseling, etc. and applying rust removing solution of approved make with cotton waste swab to reinforcements etc complete as directed by Engineer-In-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika

Material and labour for providing and applying two coats of anticorrosive epoxy phenolic rebar protective system IPNet RB of Krishna Conchem or equivalent of approved make and quality comprises of resin and hardener mixed as per manufacturer's instructions with minimum 9-10 hours between the coats, sprinkling dry sand when 2nd coat is tacky so as to provide rough finish and ensuring air curing of minimum 10 hours after the top coat before any subsequent treatment etc. including scaffolding etc complete all as specified and as directed by Engineer-in-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE Note: (a) New Reinforcement shall be measured and paid separately under respective item. (b) Cost of welding deemed to be inclusive in this item of work.

Material and labour for providing and applying a priming cum bonding coat of two component Epoxide Resin conforming to ASTM-C-882-91 of approved make and quality to clean and sound concrete area by brush or any other established method by mixing base and curing agent 2:1 proportion by weight for joining old and new concrete as per technical specifications of manufacturer complete all as specified and as directed by Engineer-in-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE Note-Work shall be carried out as per the manufacturers specifications & certificate on this account shall be taken from consultant and as approved by Engineer-in-charge

Material and labour for providing and laying 20 mm thick POLYMER MODIFIED MORTAR over identified R.C.C. members in One layer in proportion as per approved make, blended to a required consistency and applying and finishing by floating, curing after initial setting time, including providing and inserting 10 mm mild steel shear key bars (minimum 3 nos per sqm), wherever required, bonding slurry, etc complete all as specified and as directed by Engineer-in-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE. Note for Item No. 93 to 103:- (i) The work under Item No. 93 to 103 shall be carried out by authorised applicator only. (ii) Defect liability for these items shall be 5 years from certified date of completion. (iii) Amount of 5% of these items shall be retained during RAR and FB. This amount shall be released after successful completion of Defects liability period as mentioned above. (iv) Non destructive testing shall be got carried out through IIT / NIT / College of Engineering Pune to decide fulfillment of fitness criteria of structure. (v) The test shall be carried out at each discrete location or locations decided by GE or testing authority. (vi)The cost of testing shall be deemed to be included in the rate quoted by the contractor. Completion shall be issued by GE after only getting structural stability certificate of each respective building from testing authority.

Material and Labour for reinforced cement concrete (Nominal mix) 1:2:4 using 20mm graded stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, chajja, shelves and like complete all as specified and directed by Engineer-in-Charge.

Material and labour for rendering 10mm thick on internal wall surfaces using factory manufactured pre mix/ready mix plaster of 'Roofit Mix' of M/s Premier Floor to Roof Materials Pvt Ltd/'Easy plast' of M/s Walplast Products Pvt Ltd/'Readiplast' of M/s Ultratech Cement Ltd' / Sound last PMC-1 of M/s Sound buildcare Pvt Ltd/or other approved equivalent make, having minimum composition of C:S : 1:3 using fully treated dry, well graded natural sand conforming to IS 383 suitable for plastering, having low rebound properties, low water demand for curing properties, mechanical mixing with water in a metallic tray only to make good consistency as per the specification of the Manufacturer and applied over masonry and concrete surfaces and finishing with sagol finish not less than 1mm thick, including cleaning the surfaces, curing etc complete all as specified & directed by Engineer-in-Charge.

Material and labour for rendering 5 mm thick on ceiling using factory manufactured pre mix/ready mix plaster of 'Roofit Mix' of M/s Premier Floor to Roof Materials Pvt Ltd/'Easy plast' of M/s Walplast Products Pvt Ltd/'Readiplast' of M/s Ultratech Cement Ltd' / Sound last PMC-1 of M/s Sound build care Pvt Ltd/or other approved equivalent make, having minimum composition of C:S : 1:3 using fully treated dry, well graded natural sand confirming to IS 383 suitable for plastering in ceiling, having low rebound properties, low water demand for curing properties, mechanical mixing with water in a metallic tray only to make good consistency as per the specification of the Manufacturer and applied over concrete surfaces and finishing with sagol finish not less than 1mm thick, including cleaning the surfaces, curing etc complete all as specified & directed by Engineer-in-Charge.

Material and labour for rendering 15 mm thick cement plaster in CM 1:4, two coats using factory manufactured pre mix/ready mix of 'Roofit Mix'of M/s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd/'Soundplast PMC-1' of M/s Sound buildcare pvt.Ltd/ or other approved equivalent make, having minimum composition of C:S : 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechnIcal mixing with water in a metalic tray only to make good consistency as per the specification of the Manufacturer and applied over exterior masonry and concrete surfaces with base coat of 10 mm thick and finishing coat of 5 mm thick final rendering including using richer mix for making corners if necessary, at all floors and level, including making grooves of existing size wherever required,inclding sagol finish including cleaning the surfaces, curing including provide of 150mm chicken wire mesh fixed with nails at the junction of RCC columns/walls/ beams/ lintels and brick masonry at external faces before plastering including scaffolding at any height and all safety materials required for execute work etc. complete all as per specifications & as directed by the Engineer-in-Charge.

Material and labour for opening out cracks in wall surfaces in 'V' shape by mechanical grinder and removing the loose material. filling with crack filler of Dr. Fixit crack-X, shrink-free or equivalent all as per manufacturer's instructions and finishing the surfaces to match with existing finish complete all as specified and as directed by Engineer-in-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE

Material and labour for preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper with roller over a coat of alkali resistant wall primer complete all as specified and as directed Make : Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints

Material and labour for complete removal of existing treatment of old decorated wall surfaces and applying two coats of oil bound distemper with roller over a coat of alkali resistant wall primer complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & Nicholson / Shalimar Paints

Material and labour for complete removal of existing treatment of plastered wall surface and applying two coats of Acrylic weather proof coat 100% exterior grade paint over one coat of acrylic primer upto a height of bldg roof including formwork/scaffolding/ladders and safety belts with precautions etc complete all as specified and as directed by Engineer-in-Charge. Make : APEX ULTIMA” of Asian Paints/ “WEATHER COAT ALL GUARD” of Berger Paints/"EXCEL TOP GUARD” of Nerolac/ “DULUX WEATHERSHIELD MAX” of ICI India

Material and labour for complete removal of existing treatment of old decorated ceiling surfaces and applying two coats of oil bound distemper with roller over a coat of alkali resistant wall primer complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & Nicholson / Shalimar Paints

Material and labour for preparation of ceiling surfaces and applying 1.5mm thick wall care putty complete to smoothen the underneath surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Asian Paints / Nerolac Paints /Jenson & Nicholson / Shalimar Paints / JK wall care putty

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and removal of rubbish to outside MD land etc complete all as specified and as per directed all as specified and as per directed

Material and labour for 75 mm thick cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in flooring, path/hardstanding and finishing the surface even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for roughening surface of old concrete roof/floor by picking, sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3.0 kg of cement per sqm all as specified and as per directed

Dismantling of 100mm dia CI/ PVC pipe including bends/branch pipe jointed in cement mortar and taking out if required complete all as specified and as directed by Engineer-in-Charge

Dismantling of 75mm dia CI/ PVC pipe including bends/branch pipe jointed in cement mortar and taking out if required complete all as specified and as directed by Engineer-in-Charge

Supply and fix PVC (SWR), type B, single socketed soil waste pipes with rubber ring joints, 110mm dia, fixed to walls complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Supreme / Finolex

Supply and fix PVC (SWR), type B, single socketed soil waste pipes with rubber ring joints, 75mm dia, fixed to walls complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Supreme / Finolex

Supply and fix in repairs PVC (SWR) bends any radius, 110mm dia. complete all as specified and as directed by Engineer-in-Charge Make : Prince / Supreme / Finolex/Astral

Supply and fix in repairs PVC (SWR) bends any radius, 75mm dia. complete all as specified and as directed by Engineer-in-Charge Make : Prince / Supreme / Finolex/Astral

Supply and fix PVC (SWR) vent cowl 110 mm dia complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Supreme / Finolex/Astral

Supply and fix PVC (SWR) vent cowl 75 mm dia complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Supreme / Finolex/Astral

Supply and fix PVC (SWR) branch piece, single (single Y) equal or unequal of any radius 75mm bore with access door etc complete all as specified and as directed. Make :Supreme/ PRINCE (Ultrafit)/ Kisan/ Finolex/ Astral

Supply and fix PVC (SWR) branch piece, double (double Y) equal or unequal of any radius 110mm bore with access door etc complete all as specified and as directed. Make :Supreme/ PRINCE (Ultrafit)/ Kisan/ Finolex/ Astral

Material and labour for providing stages wise waterproofing treatment to sunken portion of toilets as under and as directed by Engineer-in-Charge. Stage 1: Demolition of WC including lime concrete and cement concrete coba etc and preparing the surfaces of existing sunken portion of WCs or bath etc with wire brush to remove all loose dirt, oil grease etc including removing debris outside MD land etc complete all as specified and directed. Stage 2: Providing 15 mm thick plaster in CM 1:3 mixed with integral water proofing chemical of STP Ltd in the proportion /quantity all as per manufactures instructions. Stage 3 : Primer - Mix Tarfelt LM with water in ratio 1:1 @ 250 gms/sqm and apply the primer on the plaster surfaces Stage 4 : Application of 1 st coat of Tarfelt LM of STP Ltd without dilution with water@1kg/sqm by brush all as per manufactures instructions. Stage 5: Laying 50 GSM fibber glass cloth over the 1st coat while the coated surface is still tacky Stage 6: After 6 to 7 hours interval apply second coat i.e final coat of Tarfelt LM without dilution with water of STP Ltd by brush as per manufactures instructions.@1kg /Sqm Stage 7: Providing 10mm thick protective plaster in CM 1:3 mixed with STP NO -1 @ 250ml/50kg cement all as manufactures instructions.

Material and labour for plain cement concrete 1:5:10, type E-2, using 40 mm graded stone aggregate, as in lean concrete complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs vitreous china wash down, white, water closet pan (pedestal pattern) with 'P' of 'S' trap (of size 465mm x 355mm x 265mm),including plastic seat cover to match with colour of WC, closed pattern with flat bottom & cover and chromium plated mild steel or aluminium anodized hinging device including connecting to trap and flushing pipe, anti-syphonage pipe etc complete all as specified and directed by Engineer-in-Charge. Make : Cera/Hindustan/Parryware/Jaguar/Hindware/Johnson

Supply and fix in repairs PVC valveless, syphonic action type low level flushing cistern 10 ltr capacity white with inlet ball valve, float and handle including brackets, including flush pipe of polyethylene of low or high density or PVC 32mm dia including connection to pipe and fixing of chains and pull or lever complete all as specified and as directed by Engineer-in-Charge. Make : M/S Johnson Peddar/ Parryware/ RAK Ceramics/ CERA

Supply and fix in repairs PVC floor trap 75mm with grating including jointing with waste pipe Complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Finolex / Supreme

Supply and fix in repair, CP brass towel Ring Cat No- BA-21 all as specified and as directed by Engineer-in-Charge. Make-Prayag or equivalent as approved by GE

Note: Deduct Credit for demolished / dismantled material of Rs. (-) 77,565.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'

KAJAL CONSTRUCTION (BID ID -3271110)

Shah Enterprises (BID ID -3269014)

Vishal Builders (BID ID -3275935)