Repair and renovation work at Corporation Commissiner Bangalow in Thamukkam main road in ward 31

Amount

Dismanlting the Exisiting Damaged Plain Cement Concrete including Labour charges etc Complete

Dismantling, clearing away and carefully stacking materials useful for reuse for any thickness of walls etc Complete

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum

Picking the Existing damaged Cement plastering surface etc.Complete

Plastering with cement mortar 1:3, 20 mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Supplying and filling in foundation and basement with Crushed Stone Dust in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and Eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Plain Cement Concrete 1:1.5:3 (One part of Cement, one and half part of Crushed Sand (M- Sand), three coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Brick work in CM1:3 (one cement & five sand) using ground moulded chamber bricks of size 9" X 43/8" X 23/4" standard specification including finishing, curing ,etc., complete complying with standard specification - 100cft

Damp proof course with Cement Mortar 1:4 (One Cement and Four sand) 12mm thick mixed with best approved quality water proofing compound conforming to Indian Standard specification as specified by the departmental officers at 2% by weight of cement used and finishing, curing etc. complete complying with standard specification.

Plastering with cement mortar 1:3, 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc, complete as per standard specifications (S.I.306)

Construction of inspection chambers of following sizes with earth work excavation for foundation with 23cm thick brick jelly cement concrete bed in C.M. 1:4:10 using 40mm Brick jelly for foundation, brick work in C.M. 1:6 for chambers, plastering with C.M. 1:3 12mm thick, benching, channelling, 75mm thick RCC loose slab covering in C.M. 1:2:4 mix using 20mm blue granite jelly including necessary reinforcement, etc., complete (60 x 60 x 60cm )

Supplying and Fixing for Cuddapah Slab Sink of size 600mm x 450mm x 200mm with 32mm dia 'B' Class GI Waste Water Pipe & 32mm dia CP Waste Coupling etc Complete

Supply and Fixing for Cuddapah Slab 38 / 40mm Thick etc Complete

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement

Dadooing walls with Glazed tiles of sizes 305mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed.

White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed. -100sq.m S.I.333

Supplying & fixing door shutters for Mediun Density Fiber Board of exterior grade 35 mm thick,single leaf conforming to IS:12406/1989 with 35x12 mm T.W.Lipping on all edges with necessary adhesives and CP screws complying with standard specifications. The rate is inclusive of threee coats of best quality varnish but excluding cost of furniture fittings.such as 300 mm tower bolt 2nos,200mm towerbolt I no. 300mm Aldrop 1 No. Alu handle ornamental type 2 Nos,and 1 No. Door stopper etc complete. FLUSH AND FOLDING DOORS

Supply and fixing of PVC Solid Doors using 19 gauge 19mm MS Sq,tubes for styles and frames, 15mm MS Sq.tubes for to, Lock and bottom rails. The Steel Tubes shall be covered with 5mm thick Solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed inpositio nincluding furniture and fittings. The over all size of styles shall be 50mm X 30mm. The over all size of to prail, Lock rail and bottom rail shall be 75mm X 30mm. The over all size of frames shall be 50mm X 45mm with suitable tabate for housing the shutter etc, complete as per standard specification.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Supply & Fixing of PVC Pipes & Specials 25mm PVC Pipe

25mm Elbow

25mm PVC Bend

110mm PVC Pipe

110mm PVC Tee

110mm PVC Elbow

32mm GI Pipe

32mm GI Coupling

32mm NRV

Automatic Electrical Water Heater with copper container, with Glass Wool/ Puf insulation with MS powder coated shell suitable for 25 Litres capacity 230V/1000W (Higher end)

Wiring with 2 x 1.5 sq.mm (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point

Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work.

Supplying and fixing of Laminated Sheet 0.80mm Thick (Inside)

Supply and Fixing for SS Towel rack 600mm long with lower hanger

Supply of Brass chromium plated soap tray of size 150mm x 100mm

Supply and Fixinf for PVC / Fibre Glass framed 5.5mm thick mirror, shelf type with Hard Board Backing

Supplying and fixing of SS Sink of size 1200 x 550 x 180mm

Supplying and fixing in position White Glazed European Water Closet of best quality and approved make with 100mm 'P' or "S'' trap with Double flapped rigit P.V.C. seat cover with C.P.brasshinges with 12.5litres PVC Low Level Flushing Tank with all internal fittings etc., complete complying with standard specifications, labour inclusive of fixing low level flushing tank.

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, putty, wherever required etc, complete as per standard specification.

Painting old wood work with one coat of Synthetic Enamal paint of approved quality including cleaning the old surface by mannual labour.

Provinding for all floors mixed with red oxide including cost and conveyance of all materil as to site and labour charges etc, complete as per standard specifications (S.I.306)

Providing Writing Name Board and Art and Painting Work in all Statue and Materials the rate Shall be include the cost of arist , paint scaffolding and all labour charges etc

ADD GST 18%

JF JAVIDHUSSAIN