COMPREHENSIVE MAINT FOR OTM ACCN IN ZONE-V UNDER AGE B/R-IV OF GE (SOUTH) MEERUT CANTT

Amount

M&L washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including taking off old grit plaster complete all as specified and directed. (including provides grooves shall be made).

M & L for injecting epoxy injecting grout low viscosity in concrete / RCC slab of approved make in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/ masonry by suitable gun/pump at required pressure including hole @ 50 cm centre to centre (approx) of required dia in RCC slab with power drill and fixing metalic NRV packer upto required depth grouting shall be done with mechanical pressure pump of pressure 8 to 10 Kg/Sq Cm complete as per directions of Engineer-in Charge.Epoxy injection grout in concrete/RCC work of approved make complete all as specified and directed Note : Payment shall be made on the basis of net weight of epoxy grout injected).

M & L for sunken slab treatment comprising of the following : (a) Taking out / down old existing sunken slab treatment and cleaning the old RCC surfaces of sunken slab including removal of rubbish from the site of work to a distance n. exc. 250m complete all as specified and directed. (b) Material and labour for 25mm thick PCC 1:2:4 type B-1 (Using 20mm graded stone aggregate) over cleaned surfaces (c) Material and labour 10mm thick rendering in CM (1:4) with liquid water proofing compound (WPC) @ 200ml per 50 Kg of cement consumed or as per manufacturer's instruction to sides and bottom of sunken slab (d) M & L for applying to sides and bottom of sunken slab bituminous primer @ 0.30 Kg/ Sqm over plastered surface and applying bitumen of grade 85/25 over primed surface @ 1.20 Kg/Sqm and laying APP based polymeric water proofing membrane 3mm thick of weight not less than 3 Kg/Sqm with 100mm overlap and sealed with hot flame. Note : WPC will be measured and paid for separate item and for measurement purpose plan area of sunken slab will be taken on account including mass concrete filling PCC 1:4:8 in sunken floor.

S&F 32 mm bore pvc spout drain pipe for drain out the percolation water below the floor tile, to extend pipe to ground level, including clamps out of any size flat iron and round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

M&L racking out the joints and applying epoxy joint grouting (mixer of resin , cement base and hardner) filling the gap between tiles jointes complete all as specified & directed.

Material & labour non-skid coloured ceramic tiles of size 400x400x7-8mm thick, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:4) dismantling of old tiles complete all as specified & directed.

M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick cement screed bed of CM1:4 including dismantling of old tiles complete all as specified and directed.

Material & labour for glazed coloured ceramic tiles of size 450x300x7-8mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work over and including 10mm thick rendering in CM 1:4 including dismantling of old tiles complete all as specified & directed.

S&F as in repair 15 mm bore bib tap long body chromium plated, cast copper alloy, with crutch or butterfly handle, flange, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.

Supply & fix in repair wall mixer brass chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15mm bore pipes (Provision for hand shower) complete all as specified and directed.

S&F as in repair chromium plated Angle stop valve incl flange, any description, suitable for 15 mm bore pipe, complete all as specified and directed.

S&F in repairs 15 mm thick Bip tap standard of PTMT any colour screwed for iron pipe and fixed (Minimum weight 15mm - 90gms/20mm-125gms) complete all as specified and directed.

S&F as in repair vitreous china squatting pan Orissa pattern, size 580 x 440mm, white, with integral footrest, including flushing cistern & flush pipe fixed as in repair with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed.

S&F as in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) fixed with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed.

Supply and fixing as in repair PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor complete all as specified and directed.

Supply & fix in repair white plastic seat cover for W.C.(E.T.) white including M.S. CP or aluminium hinging device complete all as specified and directed.

S&F as in repair Vitreous China wash basin, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified and directed.

Supply & fix in repairs chromium plated shower roses with swivel joints of 75mm size complete all as specified & directed.

S&F in repair chromium plated Jet spray with suitable flexible pipe to EWC for 15mm bore with fittings, complete all as specified and directed.

S&F in repair chromium plated health faucet with 1.00 mtr flexible pipe for 15mm bore with fittings, complete all as specified and directed.

Supply & fix in repairs PVC connections of 450mm long Make suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Supply and fix in repairs PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

S&F in reipair CP towel rail brass 20mm dia 600mm long CP finish complete all as specified and directed.

Supply & fixing rotational moulded polyethylene water storage tanks 1000 liters capacity three layered (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including 20 mm PVC ball valve including dismantling existing water tanks complete all as specified & directed.

S&F in repairs for 20mm bore PTMT float valve with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 140gms), complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 15 mm dia complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia complete all as specified and directed.

Supply & fix in repairs steel C.P. grating 100/125 mm dia waste pipe hole fitted as required at site complete all as specified and directed.

S&F 15 mm bore concealed stop cock, chromium plated, cast copper alloy, screwed down with crutch or butterfly handle screwed both ends, as in repair including flench complete all as specified & directed.

M&L 110m dia Cast iron rainwater socketed pipes with cement joints, with ears Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof comple all as specified and directed.

S&F in repair Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe including spreader complete all as specified and directed.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc complete all as specified and directed.

M&L rendering 15mm thick on wall surface or concrete surfaces finished even and fair on walls in cement mortar (1:4) other than fair surface, complete all as specified and directed.

M&L rendering 15mm thick on wall surface or concrete surfaces finished even and fair on walls in cement mortar (1:6) on fair surface, complete all as specified and directed.

M&L rendering 10 mm thick of concrete surfaces as in ceiling, finished even and smooth on ceiling/chajja in cement mortar (1:3), complete all as specified and directed.

M&L three coats of white washing on new ceiling/chajja surfaces including preparation of complete all as specified and directed.

M&L preparation of New wall plaster surfaces and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed

Materials & labour for perparation of new wall and finishing the surfaces of wall with 3mm thick Birla/J K wall acre putty and applying two coat of Oil Bound distemper using roller, any colour, complete all as specified & directed.

Materials & labour for perparation of existing/old and finishing the surfaces of wall including complete removal of existing treatment with 3mm thick wall putty and applying two coat of Oil Bound distemper using roller, any colour, complete all as specified & directed.

M&L preparation of old plastered surface and applying 3mm thick wall putty on wall complete all as specified and directed.

Material & Labour Washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of cement base paint incl repair work like putty, plaster and preparation of required area with primer or extra coat of cement base paint to merge with existing area of cement base paint as per requrement on walls complete all as specified and directed.

M&L for preparation of old plastered surface including complete removal of existing treatment & applying two coats of exterior emulson paint (weather proof) using Apex(Ultima) over & including one coat of putty complete all as specified and directed.

Material & labour in preparation of old white wash surfaces and applying one coat of white wash on ceiling complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid and pointed in any mortor etc complete all as specified and directed.

M&L machine cut kota stone slab flooring 18-20mm thick over and including 15mm thick screed bed in cement mortar 1:6 laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing upto Granite finish complete all as specified and directed.

M&L for anodised aluminium door shutters without sash bars, aluminium sections weighing 0.55 Kg/m(min) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading,screws suitable anodised fittings such as, hinges, handles, including anodised aluminium frame with one or more rebates including 5 to 6 mm thick black glass complete all as specified and directed.

M&L for anodised aluminium window side hung type with sash bars, aluminium sections weighing 0.55 Kg/m(min) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading,screws suitable anodised fittings such as, hinges, handles, including anodised aluminium frame with one or more rebates including 5 to 6 mm thick black glass aluminium decorative grill complete all as specified and directed.

S&F in repair door closer hydraulically regulated cast iron body designation no 3 universal type suitable for door shutter of 851to 1000mm in with and weight between 61 to 80 kg of aluminium (die cast ) body complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm PVC sheet reinforced suitable for solid PVC door suppling & fixing in opening, complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing.

S&F Stainless steel butt hinges 100mm in size complete all as specified and directed.

Material and labour for rectifying the leakage of wall mixer/wash hand basin/sink mixer including replacement of brass spindle & PVC washers necessary fixtures complete all as specified and directed.

S&F in repair 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe complete all as specified and directed.

S&F in repair brass chromium plated sink cock swan neck with swinging spout (Wall mounted model) complete all as specified and directed.

S&F in repair brass spindlle of No 2/3/4 for CP bib taps/angle cock/pillar taps etc complete all as specified and directed.

S&F in repair cast copper alloy spindle brass disc 3/4" for CP wall mixer, WHB mixer and sink mixer pillar tap / bib taps / angle cock, etc suitable for MAP Accn or other Accn. complete all as specified and directed.

S&F in repair CP brass leg of suitable size and shape for wall mixer, WHB mixer and sink mixer of existing make as per site of MAP Qtrs complete all as specified and directed.

S&F in repair brass choromium plated extension nipple of size 25 to 50 mm for CP bib taps/angle cock etc complete all as specified and directed.

S&F for False ceiling with 4 mm thick E board white prelaminated, set embossed reinforced designer ceiling board of oceanic texture fixed over and including powder coated galvanised iron grid frame work of size not more than 600x600 mm having 25mm wide t-section runner made of 0.33mm GI sheet and angle made 0.45mm thick GI sheet suspended with and including 2 mm dia GI wire and leveling clips complete all as specified and directed. Note: All exposed surface of grid shall be powdered coated white).

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified and directed.

S&F for lnsulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing PVC Insulated Panel with Single Side Prelam PVC sheet used instead of plain colour sheet thickness of insulated insulated PVC wall PVC wall lining 12 mm any description, fixed in any position with nails complete all as specified and directed.

Supply and fixing in repair galvanized MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with all acessories required like screws, beading etc and like in steel windows & doors/wooden windows/aluminium windows & doors, partitions or openings of any type etc complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

Supply & fix 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets including ridges in roof coverings complete all as specified and directed.

M&L 6mm thick Fiber cement, corrugated or semi-corrugated shets in roofs, walls, etc. Fixed with L-type or J-type or cranked hook bolts complete all as specified & directed.

M&L Fibre cement two piece adjustable serrated ridge, 6mm thick fixed with L-type or J-type or cranked hook bolts complete all as specified & directed.

Supplied and fixed pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions complete all as specified and directed.

Supplied and fixed pre-painted plain galvanised coating GI based plain sheet 0.5mm thick of any colour as in roof covering / cladding / ridges, fixed with self tapping screws complete all as specified and directed.

S&F MS flat iron as in wind ties for roof cutting tops to shape as directed, drilling holes flat iron fillets including all necessary drilling, bolting or riveting, etc & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.

Demolition of plain cement concrete in ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directed.

M&L 60 mm thick, interlocking paver block PCC type M-35 with grey cement & pigment, of shape approved by GE, in paths over & including 25 mm thick sand cushioning bed complete all as specified and directed.

M&L for providing PCC 1:4:8 type D2, 75 mm thick (using 40 mm graded stone aggregate) as in as in sub base of flooring complete all as specified and directed.

M&L PCC 1:3:6 type C1 , 50 mm thick (20 mm graded stone aggs) as in plinth protection including finished surfaces even and smooth without using extra cement complete all as specified and directed.

M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors With Grey Cement and no pigment laid over including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Supply & fix 15 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including Taking up or down GI steel tubing, testing complete all as specified & directed.

Supply, fix 20mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including Taking up or down GI steel tubing, testing complete all as specified & directed.

Supply and fix in repair PVC Pipes single socketed in any length with rubber ring joints, laid under floors etc. 75mm bore as in waste and rain water pipes complete all as specified & directed.

Supply and fix in repair PVC Pipes single socketed in any length with rubber ring joints, fixed to walls etc. 110 mm bore as in waste and rain water pipes complete all as specified & directed.

Supply & fixing in rotational moulded polyethylene water storage tanks 500 liters capacity three layered (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including 20 mm PVC ball valve including dismantling existing water tanks complete all as specified & directed.

S&F as in repair 15mm bore pillar tap, long shank, swan neck, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts complete all as specified & directed.

Taking down chowkhats or frame exceeding 1.5 Sq. m but not exceeding 4 Sq. m each with shutters without taking off shutters from the frame, complete all as specified and directed.

Taking down chowkhats or frame not exceeding 1.5 Sq. m each with shutters without taking off shutters from the frame complete all as specified and directed.

Taking down of shutter of any description exc. 1 Sqm & n.exc. 2 Sqm each complete all as specified and directed .

S&F Factory made pressed steel frames, conforming to IS, having profile 125 mm x 60 mm concrete filling in frame for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate, etc, complete, as specified, supplied and fixed

S&F Factory made pressed steel frames, conforming to IS, having profile 105 mm x 60 mm including concrete filling in frame for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate, etc, complete, as specified, supplied and fixed

S&F for flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 30 mm thick, ISI marked, complete all as specified and directed.

S&f 2nd class hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

Supply & fix MS work as in door chowkats or frames of angle or other section etc complete conforming to Fe-410-0 or 310-0. complete all as specified & directed.

S&F Butt hinges, medium weight, cold rolled mild steel and fixed with screws or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified and directed.

S&F Aluminium, anodized barrel tower bolts of extruded section and fixed, 200 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified and directed.

S&F aluminium anodized handle of size 200 mm, ISI marked, complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt 250mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed ISI marked complete all as specified and directed.

Material & labour for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material & labour for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed .

S&F Steel windows box type using 'P' section comprising double frame for gauge and glazed skelton shutter jointly with flat iron 40x3mm complete including hinges, handle, tower bolts, stops, lugs etc all as shown on drawing.Note (i) For the perpose of measurement & payment double shutter with frame shall be considered as one unit (ii) Unit rate quoted against this item shall also include the iron mongreries shown on drgs (iii) gaurd bars glazing & Wire mesh shall be measured and paid for separately complete all as specified and directed.

M&L for petty repairs to anodised aluminium door shutters and make it serviceable condition including necessary joining cleats, glazing clips, ruber neoprene packing, snap beading, screws, complete all as specified and directed.

Supply & fix in repairs second class hardwood (SAL) as in wooden scantling, rafter, purlins and like truss work etc framed together with glue pinned at joints, with single or double rebates or as in perlins, rafters etc complete all as specified and directed.

Material and Labour for 20mm thick screed bed cement paster in CM 1:4 mixed with WPC @ 200ml per 50 Kg cement consumed or as per manufacturer instructions finised even and smooth without using extra cement on roof surface (WPC will be measured and paid seperately complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Five Course Water Proofing Treatment:- Material and Labour for cleaning of plastered surface and aplying priming coat using biuminous primer @ 0.30 Kg/Sqm followed by evenly a tack coat @ 1.2 Kg/Sqm using with 85/25 grade bitumen, over laid with 3mm thick APP modified polymeric water proofing membrane with non woven polyster reinforced of weight not less than 3 Kg/Sqm unrolled and bonded to substance with side and end laps 75mm and 100mm as per manufacturer's instructions and complete top of APP water proofing polymeric membrane with a coat of hot blown industrial bitumen 85/25 grade @ 1.2 Kg/Sqm and finally finished with a coat of bituminous aluminium paint @ 0.20 Kg/Sqm including taking down existing old water proofing treatment on roof surface. complete all as specified and directed.

M&L Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O, complete all as specified and directed.

S&F Galvanized MS wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.14mm and including fixed with wooden beading for securing wire gauge with wire stappler complete all as specified and directed.

S&F in repair Glass Corner Shelf fitted in wall with screws complete all as specified and directed.

B.K.construction (BID ID -3130458)

Tayal Builders (BID ID -3113549)

AR Enterprises (BID ID -3131154)

M/S AGARWAL CONSTRUCTION CO. (BID ID -3131203)