MTPS I Mill Plant AC Plant Unit I Air Washer System Epoxy painting of blowers discharge duct and spray system changing damaged canvas cloth and discharge duct Overhauling the AWCW Pump 1A 1B and 1C and gate valves etc

Amount

Charges for dismantling the casing cover of blowers 1A & 1B for painting and reassembling after completion of painting works.

Charges for scratching and cleaning, painting with epoxy zinc chromate primer one coat and epoxy smoke grey paint two coat for structures, spray room tank pipes, eliminator frame, water strainer structure, AWS Blowers 1A & 1B, dampers and ducts.

Charges for pump complete overhauling and changing the worn out spares parts

Refitting the pump with both suction and discharge pipe flanges with new gasket , coupling the motor with pump, checking axil and radial alignment between pump and motor and completing the alignment limits and commissioning satisfactory.

Charges for dismantling the damaged portion of existing discharged air washer duct by gas cutting bolts & angles and fabrication of the discharged duct by cutting the GI sheet as required size and the angles of size 45 x 45 x 6mm as required size erection of the air washer duct and renewing the hanging suppor a) Charges for dismantling the damaged portion of existing Air washer duct by gas cutting the bolt , nuts and angles

b) Charges for fabrication of the air washer discharge duct by cutting the GI sheet as required size and drilling the angle of size 45 x 45 x 6 mm required size

c)Charges for erection of the air washer duct and renewing the hanging support and also closing the wind box gap

Charges for fixing the canvas cloth bellow joint in the Air Washer fan discharge line inside the Air Washer room (Blower1A&1B)

Charges for Dismantling the Valves from the pipe line and Overhauling and then refitting of 250 mm / 200 mm AWCW Pump suction and discharge side Gate valves and cleaning of seating surface and lapping of valve gate and seat for perfect matching and checking with leak test.

Charges for dismantling the water spray nipples and nozzles from the pipe line and scratching & cleaning and then re-fixing in the pipe line.

Charges for flushing the spray system pipe line and devolution of scrap to central stores including lead and lift etc., (Lorry will be provided by board).

Cost of Epoxy chromate primer

Cost of Epoxy paint smoke grey

Cost of Epoxy Thinner

Shaft sleeve SS316

Shaft EN 8

Bearing 6308

Bearing N308

Cost of 1mm G.I. sheet

Cost of 12mm MS civil rod

Cutting gas

Canvass cloth 9.680 meters

Cost of GI bolt (8 mm X 25 mm length) with nuts and GI washer 4 kgs

Charges for consumables and T & Ps for

ANNAI ENTERPRISES