Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.2 LAccepted-AOC | L1 | Accepted-AOC LOWEST RATE QUOTED | |
| 2 | L2₹37.2 L+₹95,632.20 (2.64%)Rejected-AOC | L2 | Rejected-AOC HIGHER RATE QUOTED THAN L1 | |
| 3 | L3₹38.0 L+₹1.7 L (4.76%)Rejected-AOC | L3 | Rejected-AOC HIGHER RATE QUOTED THAN L1 | |
| 4 | L4₹38.4 L+₹2.2 L (5.97%)Rejected-AOC | L4 | Rejected-AOC HIGHER RATE QUOTED THAN L1 | |
| 5 | L5₹39.2 L+₹2.9 L (8.06%)Rejected-AOC | L5 | Rejected-AOC HIGHER RATE QUOTED THAN L1 |
Tender Value
₹44.7 L
EMD Value
₹89,500
Closing Date
27 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2023_MES_599562_1
8400-982/E2
Open Tender
Civil Works
Works
180 days
PANAGARH
Class D and Category a(i) (Building)
5 documents required · 5 mandatory
₹500
GE PANAGARH
₹89,500
Yes
7 Aug 2023
30 May 2023
28 Jun 2023
30 May 2023
27 Jun 2023
13 Jun 2023
Amount
Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed.
Demolition of Cement Concrete (unreinforced) in ground floors and pavings exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
Removing excavated spoil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and as directed..
M&L for PCC type D2 1:4:8 (using 40 mm graded stone aggregates) as in foundations ,fillings and mass concrete complete all as specified and as directed..
M&L for moorum/red bajri filling in floors or pavings, laid in layers n.exc 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed..
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat fair finished surfaces of concrete complete all as specified and as directed.
M &L for RCC (Design mix) M-25 type B1 using 20 mm graded aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.
M&L for formwork for rough finished surface of concrete (flat surface) to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified and as directed.
M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) in columns, pillars, piers etc complete all as specified and as directed..
S&F Tie bars with screwed ends, nuts, washers and mild steel plates for walls, chimneys, roofs arches, etc. king rods and straining bolts conforming to Fe- 290 Gde-E-165 complete all as specified and as directed.
S&F Mild steel screw bolts purpose made with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 30 cm long with diameter of neck in mm exc 12 mm but n.exc 20 mm complete all as specified and as directed.
M&L for PCC (1:2:4) 100 mm thick Type B1 (using 20 mm graded stone aggregate) used as in floor/pavings and finishing cement concrete surface without using extra cement complete all as specified and as directed..
M&L for Mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed..
S&F Roof trusses (framed) of angle iron members trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed..
S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment using Fe 410 -W (Gde E- 250) quality A complete all as specified and as directed.
M&L for preparation of painting of new steel & iron surfaces over 10 cm in width or girth , not otherwise described over a coat of primer using red oxide and applying two coats of synthetic enamel paint (1st quality) complete all as specified and as directed.
S&F Pre-painted galvalume aluminum zinc coating @ 150 GSM GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F Pre-painted galvalume aluminum zinc coating @ 150 GSM GI based Plain steel as in ridges sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
M&L for brickwork with fly ash old sized bricks, straight or curved on plan exc 6 m mean radius, built in CM (1:6) complete all as specified and as directed.
M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.
M&L for 75 mm thick Cement concrete type B-1, 1:3:6 (using 20mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and as directed.
M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:4) and finishing fair even and smooth without using extra cement complete all as specified and as directed.
S&F wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 3 star rating of capacity 1.5 TR, ISI marked complete all as specified and as directed Make:-Blue Star/Carrier/Diakin/Hitachi.
S&F copper wound wall mounted Voltage Stabilizer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 130V to 270V with output Voltage Stabilizer at 220V to 240V with accuracy of + 2% and of capacity of 4 KVA complete all as specified and as directed Make:- V-Guard/Sen/Pandit/AE.
M&L for Wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core 4 Sqmm and one 4.0 Sqmm PVC insulated FRLSH cable with stranded copper conductor drawing into and including PVC Casing caping complete all as specified and as directed
M&L for Sub main Wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core 6 Sqmm and one 6.0 Sqmm PVC insulated FRLSH cable with stranded copper conductor drawing into and including PVC Casing caping complete all as specified and as directed
S&F epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral 240 V, 4 ways with mounting fitted with bus bar, DIN channel, neutral link and incoming contact complete all as specified and as directed
S&F MCB SP, 6 to 32 Amps, 'C' series 10KA, 240 Volts and to be housed in DBs including necessry connection complete all as specified and directed
S&F MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection complete all as specified and as directed
M&L for Switch socket combination 5 in 1, 5A/16A, flush type universal incl GI box complete all as specified and as directed.
M&L for earthing complete with galvanised mild steel earth plate electrode 600mmx600mmx6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments, 20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.
M/S BISWAS AND KUNDU CONSTRUCTION
M/S SWAPAN KUMAR MONDAL
M/S Dey Construction
M/S TRIVENI BUILDERS
M/S JK TRADING
Hooghly Construction Co.
UNITED BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .