IMPROVEMENT TO WARUD BIBI RAMNAGAR TANDA ROAD VR 53 TOTAL LENGTH 3.00KM IN PART KM 0/00 TO 1/00, TQ.- UMARKHED, DIST.- YAVATMAL

CIVIL WORK Trimming of grass, shurbs and weeds from the shoulders/berms and disposing off the same to suitable locations etc. complete

Dismantling of existing B.T. Surface (flexible Pavement) to a depth of 50 mm. manually including loading of dismantled material to transport vehicle at site excluding lead charges

Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils.

Cubic Metre

Spreading hard murum/ soft murrum/ gravel or kankar for side width complete

Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete.

Square Metre

Square Metre

9 MM SEAL COAT: Providing and laying of Type A 9mm premix seal coat with HMP of apropriate capacity crushed stone chiping 6.7 mm size and penetration bitumen of specified grade @ 1.2Kilogram/Sq.m, preparing existing road surface by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete.(VG-30 bulk bitumen rates are considered to arrive at rates) KM 1ࠂ
灏湥䜠慲敤⁤牐浥硩匠牵慦楣杮‭牐癯摩湩⁧湡⁤慌楹杮传䍇㈠‰浭琠楨正敮獳挠浯潰敳⁤景ㄊ⸳′浭琠⸵‶浭愠杧敲慧整⁳牰浥硩摥眠瑩⁨楢畴業潮獵戠湩敤⁲牴湡灳牯整⁤潴猠瑩⁥楷桴嘠協Ⰺ氠楡⁤癯牥愠瀠敲楶畯汳⁹牰灥牡摥猠牵慦散‬楦楮桳摥琠桴⁥敲畱物摥朠慲敤‬敬敶ⱬ愠楬湧敭瑮‬湡⁤潲汬湩⁧琠愠档敩敶†桴⁥搠獥物摥†潣灭捡楴湯†畢⁴攠捸畬楤杮†牰浩⁥⼠†慴正†湡⁤匠慥挠慯⹴†潆⁲楂畴敭景猠数楣楦摥朠慲敤ⴭ单义⁇牤浵洠硩琠灹⁥潨⁴業⁸汰湡⁴楷桴匠䅃䅄‬慐敶⁲湡⁤楖牢瑡牯⁹潲汬牥⠠传敶⁲偍⁍畓晲捡⥥⠠䝖㌭‰畢歬戠瑩浵湥爠瑡獥愠敲挠湯楳敤敲⁤潴愠牲癩⁥瑡爠瑡獥 䵋ㄠȪ˕Ĉ倀潲楶楤杮†湡⁤挠湯瑳畲瑣湩⁧㔠‰洠⹭†桴捩†潍楤楦摥†倠湥瑥慲楴湯†慍慣慤⠠偍⥍†潲摡猠牵慦散†湩汣摵湩⁧污洠瑡牥慩獬‬瀠敲慰楲杮†桴⁥硥獩楴杮†潲摡†畳晲捡ⱥ†灳敲摡湩⁧〴浭‮猠潴敮氠祡牥⁳洠瑥污†〳‥†牣獵敨⁲戠潲敫洠瑥污†‫㜠┰†慈摮†牢

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.

Providing and laying in situ / ready mix cement concrete of M-10 proportion with trap / granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc.complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc )

Providing and laying in situ / ready mix M-20 cement concrete of trap /granite /quartzite /gneiss metal for approach slab / Rigid pavement including compacting, finishing, curing etc. complete. (excluding reinforcement) (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with fine agreegates of required specifications ( Natural sand / VSI sand finely washed etc ), cement 6.40 bags/cumt)

Providing and fixing 1:2:4 ordinary km stones as per I.R.C. standard including fixing in standard size in CC 1:4:8 block including curing, painting lettering etc. complete.

Providing and fixing RCC 200 metre stones as per I.R.C. standard including fixing in standard size in CC 1:4:8 block including curing, painting lettering etc. complete.

Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/ colour of 2.5 mm thick including 1.5 Refractive index reflectorizing glass beads @ 250gm/sqm.Thickness of 2.5mm is exclusive of surface applied glass beads as per IRC 35:2015. Initial Dry reflectivity RL shall be > 250 mcd/sqm/lux measured in the initial 7 days and sustained reflectivity RL of 100 mcd/sqm/lux and Qd of 100 mcd/sqm/lux measured at the end of 2 years by means of a Standard Reflectometer of Zehntner, Easylux, Delta make capable of measuring RL & QD both according to IRC 35:2015 clause 15.5. The finished surface to be level, uniform, and free from streaks and holes complete as per direction of Engineer-in-charge and in accordance with applicable specifications.(Refer MORTH Clause 803 for technical Specification and Performancefor IRC 35:2015).

Square Metre

Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in shape having area less than 0.9 square meter made out of 2 mm aluminum sheet bonded with white retro reflective sheeting of Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on one Number mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty

CD WORK Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. ( By Mechanical Means ) a) Upto 1.50m lift Normal Rate

Excavation for foundation in hard murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. a) Upto 1.50m lift Normal Rate

Providing and laying in situ / ready mix cement concrete of M-10 proportion with trap / granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc.complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc )

Providing cast in situ / ready mix block of M10 cement concrete with circular or other shaped opening for waterway including necessary formwork, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with fine agreegates of required specifications ( Natural sand / VSI sand finely washed etc ), cement 4.40 bags/cumt)

Providing cast in situ / ready mix M20 grade cement concrete for head walls of CD work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA

Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 800mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Please Enable Macros to View BoQ information