Construction of Eye OT and Wards at District Hospital Ramban (Balance Work)

Amount

Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-All work upto plinth level in 1:4:8 ( 1 cement: 4 Coarse sand: 8 graded stone aggregate 40mm nominal size) crushed.

Reinforced cement concrete work in slabs beem column etc. upto floor five level excluding cost of centering, shuttering, finishing and reinforcement.(a) 1:1.5:3 ( 1 cement: 1.5 coarse sand: 3 graded crushed stone aggregate 20mm nominal size).including all carriages

labour charges for Centering & shuttering including strutting, propping etc. and removal of form work for Suspended floors, roofs, landings, balconies and access platform.(Shuttering to be provided by the department)

Suspended floors, roofs, landings, balconies and access platform.

colomns

Lintels, beams, plinth beams, griders, bressumers and cantilevers.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars upto floor 5 level.

Labour for placing of reinforcement for beams, columns & slabs as per drawing including bending binding and placing complete including cost of binding wire

brick masnory with bricks of class designation 75 in foundation cement mortar 1:6 (1 cement : 6 coarse sand) upto level -V

(a) Half brick masnory with bricks of class designation 75 in foundation cement mortar 1:4 (1 cement : 4 coarse sand) upto level -V

15mm thick cement sand plaster in mix 1:6 (1 cement : 6 coarse sand)

12mm thick cement sand plaster in mix 1:4 (1 cement : 4 coarse sand) ( including ceiling)

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 11.68.1 Polished Granite stone slab (Safdar Ali)

Providing & Fixing of Ist quality ceramic glazed tiles conforming to IS: 13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing & Fixing of Ist quality ceramic antiskid floor tiles conforming to IS: 13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Labour for fixing of vetrified floor tiles of size 600x600mm on 20mm thick cement mortor 1:4 including cost as cement sand and grout but excluding cost of tile which is available at site.

Labour for fixing of vetrified floor tiles of size 600x600mm on 20mm thick cement mortor 1:4 including cost as cement sand and grout but excluding cost of tile which is available at site (skirting)

Providing and fixing Powder coated aluminium work for doors, windows, ventilators and partitions (minimum thckness of powder coated 50 microns) with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make (Jindal or Hindalco) conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber I neoprene .. gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I panelling, C.P. brass I stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- Charge (glazing, panelling and dash fasteners to be paid for separately.)

polyster powder coated aluminium minimum thickness of powder coated 50 micron ( section is to be used (101x48x3 )mm

Providing and fixing Powder coated aluminium (minimum thickness of powder coated 50 microns) shutters of doors, windows & ventilators including providing and fixing hinges I pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber I neoprene gasket required (Fittings shall be paid for separately.)(Jindal or Hindalco)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in charge. Pre-laminated particle board with decorative lamination on both sides.

Providing and fixing glazing With float glass panes of 5.50 mm thickness (weight not less than 13 .. 50 kg I sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubberI neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (complete job).

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay: 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat. With common burnt clay (non modular) brick tiles of class designation 10.0

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacture including priming coats with water thinnable cement primer on walls.

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Carriages

Carriage of 20mm and down gauge aggregate from source to site of work by an average distance 40 Km by M.T.

Carriage of 40mm and down gauge aggregate from source to site of work by an average distance 40 Km by M.T.

Carriage of 2nd class (100 b or 75 A ) Bricks from source to site of work by an average of distance 150 Km by M.T.

Carriage of Sand from source site of work by an average distance 150 Km by M.T.

Pluming , Sanitary Installations:-

Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied: W.C. pan with lSI marked white solid plastic seat and lid

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.

Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing G.I inlet connection for flush pipe connecting with W.C. pan.

Providing and fixing wash basin with C.I/M.S. brackets, 15mm C.P. brass taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls whenever required:

White vitreous china wash basin size 630 x 450 mm with a pair of 15mm C.P brass pillar taps.

Round basin 405 x 355 mm with single 15mm C.P. brass pillar trap. (Stainless Channel steel)

Providing and fixing white vitreous cement china pedestal wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x41 Ox265mm sizes r~spectively. 1 Urinel basin with 5 litre white PVC automatic fluashing cistern.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard.

Rectangular shape 453x357mm

Ractangular shape 1500x 450mm

Providing and fixing white viterous china laboratory sink including making all connection excluding cost of fitting:

Size 450 x 300 x 150 mm.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete:

Semi rigid pipe 40mm dia

Flexible pipe 40mm dia

(B). C.P. Fitting

Providing and fixing of 15 mm CP bib cock of approved make ( Jaquar make) having code no. CON CHR 037 confirming to IS 2980

Providing and fixing of CP Angle value of Jaquar make having code no. CON CHR053

Providing and fixing of 15 mm C.P. brass long nose bib cock of approvedmake (Jagvar make) having code no. CON CHR 307 confirming to IS 2980

Providing and fixing of CP pillar of approved make having code no. 167 B

Providing and fixing of 600 mm long tower rail of approved make having code no. 1111

Providing and fixing of CP soap dish of approved make having code no. 1131 N

Providing and fix of CP shower of approved make having code no. 1799 incl. shower arm

Providing and fixing 10mm sand CP grating for gully, floor or nahani trap.

Providing and fixing in position 40mm diameter mosquito proof couping of approved municipal design.

Providing and fixing of CP neeple of approved make

Providing and fixing trap of self cleaning design with screwed down or hinged grating with or with or without vent arm complete, including cost of cutting and making good the walls and floors:

100mm inlet and 100mm outlet sand cast iron S&S as per IS: 1729

100mm inlet and 75mm outlet sand cast iron S&S as per IS: 1729

Water Supply, CP Fittings, Disposal System:-

Providing and fixing G.I pipes complete with G.I fittings and clamps, including cutting and making good walls.

15mm dia nominal bore (medium)

20mm dia nominal bore (medium)

Providing and fixing G.I pipes complete with G.I fittings and clamps, trenching and refilling etc. (external work)(20mm dia nominal bore.)

Providing and fixing ball value (brass) of approved quality complete. High or low pressure with plastic floats.

20 mm nominal bore

15 mm nominal bore

Providing and fixing gun metal non-return value with of approved quality (screwed end) (20mm nominal bore (vertical)

Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.

Providing and fixing of PVC pipe of 4Kg/ Cm Square of approved make ( Spureme) for carring disposal of seat and waste water of wash basin etc. incl. scalfoliding complete.

Providing and fixing PVC floor trape of supreme make of size 100x 75

Providing and fixing of PVC collar of approved make of supreme make

Providing and fixing of PVC plain bend of supreme make

Providing and fixing of steel clamp of good quality incl. fixing the screws and making good the wall

Providing and fixing of PVC Door bend of supreme make

Providing and fixing of PVC door Tee

Providing and filling of joints in PVC pipe with solution and ring of required size

Making hole up to 20x20 cm and embedding pipes up to 150mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement: 3 coarse sand 6 graded stone aggregate 20mm nominal size) including disposal of malba.

(D). Sewer Line

Earth work in excavation by manual means in trenches of required width for pipes, cables. All kinds of soil-(a) pipes, cables etc. exceeding 80mm dia but not exceeding 300mm dia.

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) aii-round S.W. pipes including bed concrete as per standard design: ( for150mm diameter S. W. pipe) crushed

Providing and lying of cement concerte in 1:3:6 mix ( 1 cement : 3 coarse sand: 6 graded stone aggregate) using 20 mm nominal size aggregate for in encasing of pipe ( Crushed)

Centring and shuttermg including strutting, propping etc. and removal of form for· Foundations: footings, bases of columns etc. for mass concrete. (for in casing of pipe)

Supplying and fixing C.I. cover 300x300mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) RCC top slab with 1:1.5.3 mix ( 1 cement : 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement :2 coarse sand: 4 graded stone aggegate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design.

inside size 90x80 cm and 45 Cm deep incl. C.I cover with frame ( light duty) 455x610 mm internal diamensions total weight of cover and frame to be not less than 38 Kg ( weight of cover 23 Kg and weight of frame 15 Kg)With F.P.S bricks with class designation 75 and with Crushed stone aggregate

Mohd Azam