REPAIR AND REPLACEMENT OF JOINERY, FLOORING, PLASTERING AND MISC B/R WORKS AT AJAYMERU, MGS ENCLAVE AND HALDIGHATI LINE AT JAIPUR MIL STN UNDER GE (S) JAIPUR

Amount

Taking down chowkhat or frames with shutters (Without taking off shutters from frames) area n.exc 1.50 Sqm complete all as specified and as directed.

All as per item No 1 above but area exc 1.50 Sqm but n.exc 4 Sqm complete all as specified and as directed.

Taking down shutters of any description exc 1.00 sqm but n exc 2.50 sqm complete all as specified and as directed.

S&F mild steel framed work as in door frame 40x40x6mm conforming to Fe 410-W(Gde E-250) Quality A including 12 mm dia deformed bars (Tie bar) for strengthening at bottom of chowkhat inlcuding cutting floor to accommodate strengthening bar & making good in PCC(1:2:4) type B0 complete all as specified and as directed.

S&F mild steel holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Cutting holes in stone / brick walls built in CM for inserting hold fast & making good dismantled portion in CM (1:3) depth of embaded portion of holdfast n. exc half brick complete all as specified and as directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

M&L framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F 100 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete all as specified and as directed.

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & sliding bolts of extruded sections complete all as specified and as directed.

S&F aluminium handles 125 mm size, cast type, anodised complete all as specified and as directed.

S&F aluminium anodised floor door stopper overall length 140 mm double legged with rubber shoe, fixed to bottom rail of door complete all as specified and as directed .

S&F in repair aluminium (Diecast) body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed. .

Hacking out old broken glass pane (any thickness, size, quality/ description) from metal/wood frame including punching or drilling out old glass panes, pins, springs, clips & providing & fixing new Figured glass 4.0mm thick, pin head type any glazing with oil putty in square not exceeding 1.00 Sqm in each pane complete all as specified and as directed.

S&F galvanised mild steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

S&F in repairs galvanised mild steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanised wire staples including welding in steel section window or wherever necessary, including wooden beading in wooden doors/windows wherever required complete all as specified and as directed.

M&L Applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer complete all as specified and as directed.

M&L Preparation of new surface & applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including over a one coat of red oxide, zinc chrome primer complete all as specified and as directed.

S&F factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing mentioned against item No 8080 of MES SSR - Part-II 2020 complete all as specified and as directed..

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing mentioned against item No 8095 in MES-SSR-Part-II 2020 complete all as specified and as directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L for rendering 10 mm thick in CM(1:6) on brick walls or concrete surface, surface finished even and fair without using extra cement admixed with integral water proofing compound at the rate at 3% per Kg of cement of approved make and curing the same as per manufactures specification complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:4 on Brick Walls surfaces or surface other than fair face of brick work of walls, finished even & fair without using extra cement admixed with integral water proofing compound at the rate of 3% per kg of cement approved make and curing the same as per manufactures complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper of approved shade complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint of approved shade complete all as specified and as directed.

M&L Powder Coated (minimum thickness of powder coating 50 micron)Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. stainless steel screws, all complete including making good disturbed portion with the cement mortar 1:4 or PCC 1:2:4 type B0 all as specified and directed by Engineer-in-Charge.

M&L Powder Coated (minimum thickness of powder coating 50 micron) Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

M&L Powder Coated (minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

M&L Powder Coated (minimum thickness of powder coating 50 micron)Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

M&L Aluminium powder coated (minimum thickness of powder coating 50 micron) door/window shutter openable/ sliding type with aluminium section weighing 0.35 Kg/ Mtr incl. necessary joining, cleats, glazing clips, rubber packing aluminium powder coated snap beading, screws, handle & tower bolt etc complete all as specified

S&F Plain glass 5.0mm thick, pin head type & glazing with neoprene rubber beading in squares not exc 1 sq.m in each pane

M&L in repair for 19 mm thick coloured kitchen cabinet door shutter made out by MDF boards pre laminated both side with PVC coated lipping work on edge of shutter

M/L in repair 19 mm thick kitchen cabinet partition and shelf etc made out by MDF boards pre laminated both side including fixed and including support/ bearing member of shelf in cabinate

S & F Auto close hinges, stainless steel, bright finish or electrogalvanised fixed.complete all as specified and as directed

S&F brass handle of 100mm size cast type, polished bright complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for coloured Non Skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.09 sqm but not exceeding 0.16 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar 1:6, finished even and smooth without using extra cement all as specified

M&L for coloured Glazed ceramic tiles in vertical surfaces of size 350mm x 250mm/ 450x 350 mm both 7mm thick set and jointed in neat cement slurry over and incl 10mm thick rendering in CM 1:4 and pointed in white or coloured cement to match complete all as specified.

M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in cement mortar 1:6 all as directed by Engineer-in-charge.

M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm , on vertical surfaces such as in skirting & dado set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 all as directed by Engineer-in-charge.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15 mm thick screed bed in CM 1:6.

M&L for PCC 1:2:4 type C1 using 20mm graded stone aggregate as in plinth protection, 50 mm thick finished even and fair without using extra cement.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in flooring 75mm thick finished even and fair without using extra cement.as directed by Engineer-in-Charge.

M&L for 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base to floor finished fair & even all as specified and directed by Engineer-in-charge.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design and pattern as in foothpath, parks, lawns, drive ways or light traffic parking etc of required strength thickness and size / shape made by table vibratory method using PU mould laid in required colour and pattern over and including 50mm thick compacted bed of fine sand ,compacting and proper embedding / laying of inner locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand all as specified.

Demolition of PCC in ground floors and pavings not exc 15cm thickness ( below or above ground level )

Demolition of stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar.

M&L for Granite (of any type) work (table rubbed and polished) 20mm thick in flooring over & including 15mm thick screed bed (bedding layer) in CM 1:6, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of Granite including cutting and polishing (half mirror polish i.e. half granite polish as per local trade practice) all as specified & directed by Engineer-in-charge.

M&L for Granite (of any type) tiles 20mm thick, in flooring machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the granite stone including 15 mm thick screed bed (bedding layer) in CM 1:6 cutting and polishing complete.

M&L for Granite (of any type) tiles 20mm thick, in skirting /dado machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the granite stone including 10mm thick rendering in cement mortar 1:4 cutting and polishing complete.

S&F false ceiling aluminium snap grid type with hot dipped pre-coated sections & 12mm thick perforated panels mineral finish of grid size 60cmx60cm Make : Armstrong with following aluminium sections for frame work Including dismantking old False ceilling boards. (a) Wall side angle 19x19mm (b) Main tee 32x15mm (c) Cross tee 32mmx15mm having integral splices at both ends for interlocking complete with hangers 4mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

Demolition of PCC in roof covering. Kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing tratment of any type all as directed by Engineer - in charge.

M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC type B-0,( 1.2.4) using 12.5 mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop with and incl WPC @ 3% weight of cement.

Supplying & applying two coats of fiber reinforced UV resistant elastomeric liquid water proofing and heat reflective coating with acrglic polymers and polyester /glass fibre after scraping and properly cleaning the surface to remove loose particles with wire brushes complete all as specified and directed by engineer In-charge over a coat of primer as per manufacturure instructions (Make:- Asian Paint, M/STP LTD-Shalicry MHI,M/S Sika Cool Coat

M&L for ATT of voids in masonary using chemical emulsion one litre per hole, at 300 mm interval including drilling holes at 45 degree and replugging them with cement mortar (1:2) to match the existing floors complete all as specified and as directed.

M&L for ATT at points of contract of wood work by chemical emulsion (in oil or kerosene based solution @ 0.5 ltr per hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed

MSR INFRATECH

Chaudhary Constructions

M/S MAYANK ASSOCIATE

ANKIT BUILDERS

Satish kumar and company

UNIVERSAL INFRAPROJECT PVT LTD