Comprehensive External Infrastructure Development including Type IV and Type-VI Residential Units, Main Entrance Gate, Boundary Wall, Underground Water Tank, Sewage Treatment Plant and other miscellaneous works at Morena M.P., under RLBCAU.

GRAND TOTAL ₹ 1695,92,625.89

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

2.0 EARTH WORKS

Earth work in excavation by mechanical means (Hydraulic

excavator)/manual means over areas (exceeding 30 cm

in depth, 1.5 m in width as well as 10 sqm on plan)

including getting out and disposal of excavated earth

lead upto 50 m and for all lift, as directed by Engineer-

Earth work in excavation by mechanical means (Hydraulic

excavator) / manual means in foundation trenches or

drains (not exceeding 1.5m in width or 10 sqm on plan)

including dressing of sides and ramming of bottoms, lift

upto 1.5 m, including getting out the excavated soil and

disposal of surplus excavated soil as directed, within a

Earth work in excavation by mechanical means (Hydraulic

excavator)/manual means over areas (exceeding 30 cm

in depth, 1.5 m in width as well as 10 sqm on plan)

including getting out and disposal of excavated earth

lead upto 50 m and lift upto 1.5 m, as directed by

Engineer-incharge.

2.7.3 Hard rock (blasting prohibited) Cum 600.00 ₹ 1,432.95 ₹ 8,59,770.00

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Extra for every additional lift of 1.5 m or part thereof in

2.26 excavation / banking excavated or stacked materials.

2.26.2 Ordinary or hard rock Cum 751.00 ₹ 227.40 ₹ 1,70,777.00

Excavating trenches by mechanical / manual means of

required width for pipes, cables, etc including excavation

for sockets, and dressing of sides, ramming of bottoms,

for all depth, including getting out the excavated soil, and

then returning the soil as required, in layers not

exceeding 20 cm in depth, including consolidating each

deposited layer by ramming, watering, etc. and disposing

of surplus excavated soil as directed, within a lead of 50

2.10.1 All kinds of soil 0.00 ₹ 0.00

Pipes, cables etc. exceeding 80 mm dia. But not

exceeding 300 mm dia

Filling available excavated earth (excluding rock) in

trenches, plinth, sides of foundations etc. in layers not

2.25 exceeding 20cm in depth, consolidating each deposited Cum 3974.00 ₹ 196.00 ₹ 7,78,904.00

layer by ramming and watering, lead up to 50 m and lift

Excavating, supplying and filling of local earth (including

royalty) by mechanical transport up to a lead of 5 km,

also including ramming and watering of the earth in

layers not exceeding 20 cm in trenches, plinth, sides of

foundation etc., complete.

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Carriage of Earth by mechanical transport including

1.1.2 loading, unloading and Stacking including royalty & Cum 1540.00 ₹ 326.68 ₹ 5,03,087.00

carriage up to 5 KM complete.

Carriage of Excavated rock by mechanical transport

1.1.4 including loading, unloading and Stacking including Cum 723.00 ₹ 522.70 ₹ 3,77,912.00

royalty & carriage up to 5 KM complete.

Supplying and filling in plinth with sand under floors

2.27 including, watering, ramming consolidating and dressing Cum 57.00 ₹ 2,123.75 ₹ 1,21,054.00

Surface dressing of the ground including removing

vegetation and inequalities not exceeding 15 cm deep

and disposal of rubbish, lead up to 50 m and lift up to 1.5

m. All kinds of soil.

Felling trees of the girth (measured at a height of 1 m

above ground level), including cutting of trunks and

2.33 branches, removing the roots and stacking of serviceable

material and disposal of unserviceable material

2.33.1 Beyond 30 cm girth upto and including 60 cm girth Each 20.00 ₹ 532.35 ₹ 10,647.00

2.33.2 Beyond 60 cm girth upto and including 120 cm girth Each 15.00 ₹ 2,373.50 ₹ 35,603.00

Beyond 120 cm girth upto and including 240 cm girth

Supplying chemical emulsion in sealed containers

including delivery as specified

Chlorpyriphos/ Lindane emulsifiable concentrate of 20%

Anti termite treatment

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Diluting and injecting chemical emulsion for POST-

2.35 CONSTRUCTIONAL anti-termite treatment (excluding the

cost of chemical emulsion) :

Treatment of soil under existing floors using chemical

emulsion @ one litre per hole, 300 mm apart including

2.35.3 drilling 12 mm diameter holes and plugging with cement

mortar 1 :2 (1 cement : 2 Coarse sand) to match the

existing floor :

With Chlorpyriphos/Lindane E.C. 20% with 1%

TOTAL (Carried Over to Summary of Civil Works) 0.00 ₹ 143,51,131.00 ₹ 0.00

4.0 CONCRETE WORKS

Providing and laying in position cement concrete of

4.1 specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from

4.1.5 natural sources : 6 graded stone aggregate 20 mm Cum 1.00 ₹ 7,294.70 ₹ 7,295.00

nominal size derived from natural sources)

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from

4.1.8 natural sources : 8 graded stone aggregate 40 mm Cum 1557.00 ₹ 6,812.00 ₹ 106,06,284.00

nominal size derived from natural sources)

Centering and shuttering including strutting, propping

etc. and removal of form work for :

4.3.1 Foundations, footings, bases for columns Cum 1857.00 ₹ 392.15 ₹ 7,28,223.00

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and laying damp-proof course 50mm thick with

cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-

4.11 III) derived from natural sources : 4 graded stone Sqm 614.00 ₹ 495.75 ₹ 3,04,391.00

aggregate 20mm nominal size derived from natural

Extra for providing and mixing water proofing material in

cement concrete work in doses by weight of cement as per 50 kg

per manufacturer's specification. cement

Providing & applying a coat of residual petroleum

bitumen of grade of VG-10 of approved quality using

1.7kg per square metre on damp proof course after

cleaning the surface with brushes and finally with apiece

of cloth lightly soaked in kerosene oil.

Making plinth protection 50mm thick of cement concrete

1:3:6 (1 cement : 3 coarse sand (zone-III) derived from

natural sources : 6 graded stone aggregate 20 mm

nominal size derived from natural sources) over 75mm

4.17 thick bed of dry brick ballast 40 mm nominal size, well Sqm 139.00 ₹ 749.30 ₹ 1,04,153.00

rammed and consolidated and grouted with fine sand,

including necessary excavation, levelling & dressing &

finishing the top smooth.

TOTAL (Carried Over to Summary of Civil Works) 0.00 ₹ 118,43,567.00 ₹ 0.00

5.0 REINFORCED CEMENT CONCRETE WORK

Centering and shuttering including strutting, propping

etc. and removal of form for :

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Foundations, footings, bases of columns, etc. for mass

Walls (any thickness) including attached pilasters,

butteresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access

5.9.4 Shelves (Cast in situ) Sqm 41.00 ₹ 927.25 ₹ 38,017.00

Lintels, beams, plinth beams, girders, bressumers and

Columns, Pillars, Piers, Abutments, Posts and Struts.

Stairs, (excluding landings) except spiral-staircases.

Extra for shuttering in circular work (20% of respective

centering and shuttering items)

Small lintels not exceeding 1.5m clear span, moulding as

in cornices, window sills, string courses, bands, copings,

bed plates, anchor blocks and the like.

5.9.16 Edges of slabs and breaks in floors and walls

Weather shade, Chajjas, corbels etc., including edges.

Extra for additional height in centering, shuttering where

ever required with adequate bracing, propping etc.,

including cost of de-shuttering and decentering at all

levels, over a height of 3.5 m, for every additional height

of 1 metre or part thereof (Plan area to be measured).

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Suspended floors, roofs, landing, beams and balconies

(Plan area to be measured)

Steel reinforcement for R.C.C. work including

5.22 straightening, cutting, bending, placing in position and

binding all complete upto plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or

Steel reinforcement for R.C.C. work including

5.22A straightening, cutting, bending, placing in position and

binding all complete above plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and laying in position ready mixed or site

batched design mix cement concrete for reinforced

cement concrete work; using coarse aggregate and fine

aggregate derived from natural sources, Portland

Pozzolana / Ordinary Portland /Portland Slag cement,

admixtures in recommended proportions as per IS: 9103

to accelerate / retard setting of concrete, to improve

durability and workability without impairing strength;

including pumping of concrete to site of laying, curing,

carriage for all leads; but excluding the cost of centering,

5.33 shuttering, finishing and reinforcement as per direction

of the engineer-in-charge; for the following grades of

concrete. Note: Extra cement up to 10% of the minimum

specified cement content in design mix shall be payable

separately. In case the cement content in design mix is

more than 110% of the specified minimum cement

content, the contractor shall have discretion to either re-

design the mix or bear the cost of extra cement.

5.33.1 All works upto plinth level

Concrete of M25 grade with minimum cement content of

Concrete of M30 grade with minimum cement content of

5.33.2 All works above plinth level upto floor V level 0.00 ₹ 0.00

Concrete of M25 grade with minimum cement content of

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Concrete of M30 grade with minimum cement content of

Add for using extra cement in the items of design mix

5.35 over and above the specified cement content therein. quintal 385.00 ₹ 733.50 ₹ 2,82,398.00

Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level

for each four floors or part thereof.

TOTAL (Carried Over to Summary of Civil Works) 0.00 ₹ 534,74,274.00 ₹ 0.00

6.0 BRICK WORK

Brick work with common burnt clay F.P.S. (non modular)

6.1 bricks of class designation 7.5 in foundation and plinth in:

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 51.00 ₹ 7,132.25 ₹ 3,63,745.00

Providing and laying autoclaved aerated cement blocks

masonry with 150mm/230mm/300 mm thick AAC blocks

in super structure above plinth level up to floor V level

with RCC band at sill level and lintel level with approved

block laying polymer modified adhesive mortar all

complete as per direction of Engineer-in-Charge. (The

band and reinforcement shall be made for seperately).

Extra for brick work / AAC block masonry / Tile brick

masonry in superstructure above floor V level, for each

four floors or part thereof by mechanical means.

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Extra for half brick masonry in superstructure, above

6.14 floor V level for every four floors or part thereof by Sqm 16.00 ₹ 15.00 ₹ 240.00

mechanical means.

Providing and laying autoclaved aerated cement blocks

masonry with 100 mm thick AAC blocks in super

structure above plinth level up to floor V level in cement

6.38 mortar 1:4 (1 cement : 4 coarse sand ). The rate includes Cum 477.00 ₹ 10,195.45 ₹ 48,63,230.00

providing and placing in position 2 Nos 6 mm dia M.S.

bars at every third course of masonry work.

TOTAL (Carried Over to Summary of Civil Works) 0.00 ₹ 136,58,127.00 ₹ 0.00

8.0 MARBLE & GRANITE WORK

Providing and fixing 18 mm thick gang saw cut, mirror

polished, premoulded and prepolished, machine cut for

kitchen platforms, vanity counters, window sills, facias

and similar locations of required size, approved shade,

colour and texture laid over 20 mm thick base cement

8.2 mortar 1:4 (1 cement : 4 coarse sand), joints treated with

white cement, mixed with matching pigment, epoxy

touch ups, including rubbing, curing, moulding and

polishing to edges to give high gloss finish etc. complete

8.2.2 Granite stone slab colour black, Cherry/Ruby red

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing edge moulding to 18 mm thick marble stone

counters, Vanities etc., including machine polishing to

8.3.2 edge to give high gloss finish etc. complete as per design Rmt 75.00 ₹ 510.95 ₹ 38,321.00

approved by Engineer-in-Charge. Granite work

Extra for providing opening of required size & shape for

wash basins/ kitchen sink in kitchen platform, vanity

counters and similar location in marble/Granite/Stone

work including necessary holes for pillar taps etc.

including rubbing and polishing of cut edge etc.

Providing and fixing stone slab with table rubbed, edges

rounded and polished, of size 75x50 cm deep and 1.8 cm

thick, fixed in urinal partitions by cutting a chase of

appropriate width with chase cutter and embedding the

8.10 stone in the chase with epoxy grout or with cement

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 6 mm nominal size) as per direction of

Engineer-in-charge and finished smooth.

8.10.2 Granite Stone of approved shade Sqm 2.00 ₹ 4,051.85 ₹ 8,104.00

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and fixing Ist quality ceramic glazed wall tiles

conforming to IS: 15622 (thickness to be specified by the

manufacturer), of approved make, in all colours, shades

except burgundy, bottle green, black of any size as

approved by Engineer-in-Charge, in skirting, risers of

8.31 steps and dados, over 12 mm thick bed of cement mortar Sqm 611.00 ₹ 1,267.95 ₹ 7,74,717.00

1:3 (1 cement : 3 coarse sand) and jointing with grey

cement slurry @ 3.3kg per sqm, including pointing in

white cement mixed with pigment of matching shade

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Designing, fabricating, testing, installing and fixing in

position Curtain Wall with Aluminium Composite Panel

Cladding, with open grooves for linear as well as

curvilinear portions of the building , for all heights and all

levels etc. including: (a) Structural analysis & design and

preparation of shop drawings for pressure equalisation

or rain screen principle as required, proper drainage of

water to make it watertight including checking of all the

structural and functional design. (b) Providing, fabricating

and supplying and fixing panels of aluminium composite

panel cladding in pan shape in metalic colour of

approved shades made out of 4mm thick aluminium

8.32 composite panel material consisting of 3mm thick FR

grade mineral core sandwiched between two Aluminium

sheets (each 0.5mm thick). The aluminium composite

panel cladding sheet shall be coil coated, with Kynar 500

based PVDF / Lumiflon based fluoropolymer resin coating

of approved colour and shade on face # 1 and polymer

(Service) coating on face # 2 as specified using stainless

steel screws, nuts, bolts, washers, cleats, weather

silicone sealant, backer rods etc.

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

(c) The fastening brackets of Aluminium alloy 6005 T5 /

MS with Hot Dip Galvanised with serrations and serrated

washers to arrest the wind load movement, fasteners, SS

316 Pins and anchor bolts of approved make in SS 316,

Nylon separators to prevent bi-metallic contacts all

complete required to perform as per specification and

drawing The item includes cost of all material & labour

component, the cost of all mock ups at site, cost of all

samples of the individual components for testing in an

approved laboratory, field tests on the assembled

working curtain wall with aluminium composite panel

cladding, cleaning and protection of the curtain wall with

aluminium composite panel cladding till the handing over

i of the building for occupation. The Contractor shall Sqm. 20.00 ₹ 5,015.05 ₹ 1,00,301.00

provide curtain wall with aluminium composite panel

cladding,and including base frame work for ACP having

all the performance characteristics all complete , as per

the Architectural drawings, as per item description, as

specified, as per the approved shop drawings and as

directed by the Engineer-in-Charge. However, for the

purpose of payment, only the actual area on the external

face of the curtain wall with Aluminum Composite Panel

Cladding (including width of groove) shall be measured in

sqm. up to two decimal places.

TOTAL (Carried Over to Summary of Civil Works) 0.00 ₹ 11,34,794.00 ₹ 0.00

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

9.0 WOOD & PVC WORK

Providing wood work in frames of doors, windows,

clerestory windows and other frames, wrought framed

and fixed in position with hold fast lugs or with dash

fasteners of required dia & length ( hold fast lugs or dash

fastener shall be paid for separately).

9.1.1 Second class teak wood Cum 1.00 ₹ 1,42,949.70 ₹ 1,42,950.00

Providing and fixing ISI marked flush door shutters

conforming to IS : 2202 (Part I) non-decorative type, core

of block board construction with frame of 1st class hard

9.21 wood and well matched commercial 3 ply veneering with

vertical grains or cross bands and face veneers on both

faces of shutters:

35 mm thick including ISI marked Stainless Steel butt

hinges with necessary screws

Extra for providing lipping with 2nd class teak wood

battens 25 mm minimum depth on all edges of flush

door shutters (over all area of door shutter to be

Providing and fixing wooden moulded beading to door

and window frames with iron screws, plugs and priming

coat on unexposed surface etc. complete : 2nd class teak

Providing and fixing M.S. grills of required pattern in

frames of windows etc. with M.S. flats, square or round

bars etc. including priming coat with approved steel

primer all complete.

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Fixed to openings /wooden frames with rawl plugs

Providing and fixing curtain rods of 1.25 mm thick

chromium plated brass plate, with two chromium plated

9.46 brass brackets fixed with C.P. brass screws and wooden

plugs, etc., wherever necessary complete :

Providing 40x5 mm flat iron hold fast 40 cm long

including fixing to frame with 10 mm diameter bolts, nuts

and wooden plugs and embedding in cement concrete

block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand :

6 graded stone aggregate 20mm nominal size).

Providing and fixing aluminium extruded section body

tubular type universal hydraulic door closer (having

brand logo with ISI, IS : 3564, embossed on the body,

9.84 door weight upto 36 kg to 80 kg and door width from each 4.00 ₹ 983.15 ₹ 3,933.00

701 mm to 1000 mm), with double speed adjustment

with necessary accessories and screws etc. complete.

Providing and fixing aluminium tower bolts ISI marked

anodised (anodic coating not less than grade AC 10 as

9.97 per IS : 1868 ) transparent or dyed to required colour or

shade with necessary screws etc. complete :

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and fixing aluminium pull bolt lock, ISI marked,

anodised (anodic coating not less than grade AC 10 as

9.98 per IS : 1868) transparent or dyed to required colour and Each 31.00 ₹ 100.80 ₹ 3,125.00

shade, with necessary screws bolts, nut and washers etc.

Providing and fixing aluminium handles of approved

make anodized (anodic coating not less than grade AC 10

9.100 as per IS : 1868) transparent or dyed to required colour

or shade with necessry screws etc. complete.

Providing and fixing aluminium casement stays, ISI

marked, anodised (anodic coating not less than grade AC

9.102 10 as per IS : 1868) transparent or dyed to required each 8.00 ₹ 71.50 ₹ 572.00

colour and shade, with necessary screws etc. complete.

Providing and fixing bright finished brass 100 mm

mortice latch and lock, ISI marked, with six levers and a

pair of anodised (anodic coating not less than grade AC

10 as per IS : 1868) aluminium lever handles of approved

quality with necessary screws etc. complete.

Providing & Fixing decorative high pressure laminated

sheet of plain / wood grain in gloss / matt / suede finish

with high density protective surface layer and reverse

side of adhesive bonding quality conforming to IS : 2046

Type S, including cost of adhesive of approved quality.

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and fixing factory made uPVC door frame made

of uPVC extruded sections having an overall dimension as

below (tolerance ±1mm), with wall thickness 2.0 mm (±

0.2 mm), corners of the door frame to be Jointed with

galvanized brackets and stainless steel screws, joints

mitred and Plastic welded. The hinge side vertical of the

frames reinforced by galvanized M.S. tube of size 19 X 19

mm and 1mm (± 0.1 mm) wall thickness and 3 nos.

stainless steel hinges fixed to the frame complete as per

manufacturer’s specification and direction of Engineer in-

9.117.2 Extruded section profile size 42x50 mm Rmt 144.00 ₹ 331.35 ₹ 47,714.00

9.118 Providing and fixing to existing door frames.

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

30 mm thick factory made Polyvinyl Chloride (PVC) door

shutter made of styles and rails of a uPVC hollow section

of size 60x30 mm and wall thickness 2 mm (± 0.2 mm),

with inbuilt decorative moulding edging on one side. The

styles and rails mitred and joint at the corners by means

of M.S. galvanised/ plastic brackets of size 75x220 mm

having wall thickness 1.0 mm and stainless steel screws.

The styles of the shutter reinforced by inserting

galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1

mm) wall thickness. The lock rail made up of 'H' section,

a uPVC hollow section of size 100x30 mm and 2 mm (±

9.118.2 0.2 mm) wall thickness fixed to the shutter styles by Sqm 46.00 ₹ 3,253.80 ₹ 1,49,675.00

means of plastic/ galvanised M.S. 'U' cleats. The shutter

frame filled with a uPVC multi-chambered single panel of

size not less than 620 mm, having over all thickness of 20

mm and 1 mm (± 0.1 mm) wall thickness . The panels

filled vertically and tie bar at two places by inserting

horizontally 6 mm galvanised M.S. rod and fastened with

nuts and washers, complete as per manufacturer's

specification and direction of Engineer-in-charge.

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and fixing partition upto ceiling height

consisting of G.I. frame and required board, including

providing and fixing of frame work made of special

section power pressed/ roll form G.I. sheet with zinc

coating of 120 gms/sqm(both side inclusive), consisting

of floor and ceiling channel 50mm wide having equal

flanges of 32 mm and 0.50 mm thick, fixed to the floor

and ceiling at the spacing of 610 mm centre to centre

with dash fastener of 12.5 mm dia meter 50 mm length

or suitable anchor fastener or metal screws with nylon

plugs and the studs 48 mm wide having one flange of 34

mm and other flange 36 mm and 0.50 mm thick fixed

9.105 vertically within flanges of floor and ceiling channel and

placed at a spacing of 610 mm centre to centre by 6 mm

dia bolts and nuts, including fixing of studs along both

ends of partition fixed flush to wall with suitable anchor

fastener or metal screws with nylon plugs at spacing of

450 mm centre to centre, and fixing of boards to both

side of frame work by 25 mm long dry wall screws on

studs, floor and ceiling channels at the spacing of 300

mm centre to centre. The boards are to be fixed to the

frame work with joints staggered to avoid through

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

M.S. fixing channel of 99 mm width (0.9 mm thick having

two flanges of 9.5 mm each) to be provided at the

horizontal joints of two boards, fixed to the studs using

metal to metal flat head screws, including jointing and

finishing to a flush finish with recommended jointing

compound, jointing tape, angle beads at corners (25 mm

x 25 mm x 0.5 mm), joint finisher and two coats of

primer suitable for board as per manufacture’s

specification and direction of engineer in charge all

75 mm overall thickness partition with 12.5 mm thick

double skin fire rated Glass Reinforced Gypsum (GRG)

plaster board conforming to IS: 2095: part 3 (Board with

BIS certification marks)

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and fixing factory made uPVC glazed/ wire

windows/ doors comprising of lead free uPVC

multichambered frame, sash and mullion/ coupler

(wherever required) extruded profiles having minimum

wall thickness of 1.70 mm for Series R1 and R2 profiles

and 2.10 mm for Series R3 and R4 profiles conforming to

EN: 12608 in any shape, colour and design duly

reinforced with galvanized mild steel section made of

required shape & size as per CPWD Specification, uPVC

extruded glazing beads, interlocks and Inline sash

adaptor (whereever required) of appropriate dimension,

EPDM gasket, hardware, SS 304 grade fasteners of

9.147.a minimum 8 mm dia. with countersunk head, comprising

of matching polyamide PA6 grade sleeve for fixing frame

to finished wall as per IS 1367 : Part 1 to 14, plastic

packers, plastic caps and necessary stainless steel screws

etc. Profile of frame, sash & mullion (if required) shall be

mitred cut and fusion welded/mechanically jointed duly

sealed at all corners, including drilling of holes for fixing

hardware and drainage of water etc. After fixing frame

the gap between frame and adjacent finished wall shall

be filled with weather proof silicon sealant over backer

rod of approved size and quality, all complete as per

approved drawing conforming to CPWD specification &

direction of Engineer-in-Charge. Section of steel

reinforcement and cross sections of uPVC profiles to be

as per design approved by Engineer-in-Charge.

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Wire mesh/ Glazing of plain/ toughened/ laminated/

double glass unit with/ without high performance

coatings as per design requirements and conforming to

IS: 3548 & IS: 16231 shall be paid separately. Note:-

Structural design proof checked from a Government

Engineering Institute, to be provided by the

manufacturer for : (iii) Sites with basic wind speed > 45

m/sec as per IS 875 –Part 3 (iv) Sites with structure

height more than 20m for all wind speeds

Two and half track three panels sliding window with two

glazed & one wire mesh panels with Aluminium channel

for roller track, wool pile, nylon rollers with SS 304 body.

Using R3 series with frame (85mm & above) x (40mm &

above) & glazed sash (30mm & above) x (55mm & above)

& fly screen sash (20mm & above) x (50mm & above)

9.147.A3.2 with zinc alloy (zamak) powder coated handle on every Sqm 15.00 ₹ 9,968.70 ₹ 1,49,531.00

glazed panel along with multi-point locking system.

(Height upto 1.8 meter).

Three track three panels sliding window with two glazed

& one wire mesh panels with Aluminium channel for

roller track, wool pile, nylon rollers with SS 304 body.

Using R4 series with frame (115mm & above) x (45mm &

above) & both glazed and fly screen sash (44mm &

9.147.A4.3 above) x (55mm & above) with zinc alloy (zamak) powder Sqm 107.00 ₹ 12,372.25 ₹ 13,23,831.00

coated touch locks with hook. (Height upto 1.8 meter).

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Fixed window / ventilator without mullion / transom.

Using R1 series with frame (33mm & above ) x (35mm &

above). (Height upto 0.90 metre)

Casement door double panel with French (False) Mullion

with zinc alloy (zamak) 3D hinges, multi-point locking

system with cylinder, zinc alloy (zamak) powder coated

handles on both sides.

Using R3 series with frame (55 mm & above) x (50mm &

above) & sash (55 mm & above) x (85mm & above) &

French (False) mullion (55 mm & above) x (60mm &

above). (Height upto 2.5 meter).

Providing and fixing zinc alloyed (white powder coated)

9.150 touch lock for uPVC sliding window with necessary each 87.00 ₹ 204.00 ₹ 17,748.00

screws etc. complete.

Providing and fixing steel roller for uPVC sliding window

with necessary screws etc. complete.

Providing and fixing steel (white power coated) crescent

9.153 lock for uPVC sliding window/ door with necessary each 28.00 ₹ 198.30 ₹ 5,552.00

screws etc. complete.

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and fixing factory made single extruded WPC

(Wood Polymer Composite) solid door/ window/

Ceosetory windows & other Frames/ Chowkhat

comprising of virgin PVC polymer of K value 58-60

(Suspension Grade), calcium carbonate and natural fibers

(wood powder/ rice husk/ wheat husk) and non toxic

additives (maximum toxicity index of 12 for 100 gms)

fabricated with miter joints after applying PVC solvent

cement and screwed with full body threaded star headed

SS screws having minimum frame density of 750 kg/cum,

screw withdrawal strength of 2200 N (Face) & 1100 N

(Edge), minimum compressive strength of 58 N/mm2,

modulus of elasticity 900 N/mm2 and resistance to

spread of flame of Class A category with property of

being termite/ borer proof, water/ moisture proof and

fire retardant and fixed in position with M.S hold fast/

lugs/ SS dash fasteners of required dia and length

complete as per direction of Engineer-In- Charge.

(M.S hold fast/ lugs or SS dash fasteners shall be paid for

separately). Note: For WPC solid door/ window frames,

minus 5mm tolerance in dimensions i.e depth and width

of profile shall be acceptable. Variationin profile

dimensions on plus side shall be acceptable but no extra

payment on this account shall be made.

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and fixing factory made single extruded WPC

(Wood Polymer Composite) solid decorative type flush

door shutter of required size comprising of virgin

polymer of K value 58-60 (Suspension Grade), calcium

carbonate and natural fibers (wood powder/ rice

husk/wheat husk) and non toxic additives (maximum

toxicity index of 12 for 100 gms) having minimum density

of 650 kg/cum and screw withdrawal strength of 1800 N

(Face) & 900 N (Edge), minimum compressive strength

50 N/mm2, modulus of elasticity 850 N/mm2 and

resistance to spread of flame of Class A category with

property of being termite/borer proof, water/moisture

proof and fire retardant. WPC to be laminated with PVC

foil of minimum 14 microns thick of approved design

pasted with hot melt adhesive on both faces of shutter

and fixing with stainless steel butt hinges of required size

with necessary full body threaded star headed counter

sunk S.S screws, all as per direction of Engineer-In-

Charge. (Note: stainless steel butt hinges and necessary

S.S screws shall be paid separately)

Providing and fixing IS : 12817 marked stainless steel butt

9.70 hinges with stainless steel screws etc. complete :

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and fixing bright /matt finished Stainless Steel

9.165 handles of approved quality & make with necessary

screws etc all complete.

Providing and fixing Stainless Steel tower bolts of

MR-1 approved make with necessary screws etc. complete :

Providing and fixing Stainless Steel hanging floor door

MR-2 stopper of approved make with necessary screws etc.

i Single rubber stopper Each 125.00 ₹ 225.35 ₹ 28,169.00

Providing and fixing Concealed Door Closer With Track

Arm (SS Finish), Slide in SS Cover Stainless Steel door

closer, door weight upto 80 kg and door width from 701

mm to 1000 mm), with double speed adjustment with

necessary accessories and screws etc. complete.

Providing and fixing of Mortise Lock with Handles

Stainless Steel Finish (Solid Casted) with necessary

screws etc. complete as per design & approved by

Engineer in Charge.

Providing and fixing stainless steel sliding door bolts, ISI

marked anodised (anodic coating not less than grade AC

MR-5 10 as per IS : 1868), transparent or dyed to required Each 84.00 ₹ 443.00 ₹ 37,212.00

colour or shade, with nuts and screws etc. complete :

MR-6 Providing and fixing Stainless steel Al-drop Each 29.00 ₹ 373.90 ₹ 10,843.00

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

TOTAL (Carried Over to Summary of Civil Works) 0.00 ₹ 45,31,602.00 ₹ 5,54,329.00

10.0 STEEL WORK

Structural steel work riveted, bolted or welded in built up

sections, trusses and framed work, including cutting,

hoisting, fixing in position and applying a priming coat of

approved steel primer all complete.

Providing and fixing 1mm thick M.S. sheet door with

frame of 40x40x6mm angle iron and 3 mm M.S. gusset

plates at the junctions and corners, all necessary fittings

complete, including applying a priming coat of approved

10.5.1 Using M.S. angels 40x40x6 mm for diagonal braces Sqm 8.00 ₹ 5,804.35 ₹ 46,435.00

Steel work in built up tubular ( round, square or

rectangular hollow tubes etc.) trusses etc., including

cutting, hoisting, fixing in position and applying a priming

coat of approved steel primer, including welding and

bolted with special shaped washers etc. complete.

10.16.2 Hot finished seamless type tubes Kg 300.00 ₹ 206.35 ₹ 61,905.00

Providing and fixing bolts including nuts and washers

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and fixing circular/ Hexagonal cast iron or M.S.

sheet box for ceiling fan clamp, of internal dia 140 mm,

73 mm height, top lid of 1.5 mm thick M.S. sheet with its

top surface hacked for proper bonding, top lid shall be

10.18 screwed into the cast iron/ M.S. sheet box by means of each 75.00 ₹ 220.65 ₹ 16,549.00

3.3 mm dia round headed screws, one lock at the

corners. Clamp shall be made of 12 mm dia M.S. bar bent

to shape as per standard drawing.

Steel work welded in built up sections/ framed work

including cutting, hoisting, fixing in position and applying

a priming coat of approved steel primer using structural

steel etc. as required

In stringers, treads, landings etc. of stair cases including

10.25.1 use of chequered plate wherever required, all complete. Kg 240.00 ₹ 123.60 ₹ 29,664.00

In gratings, frames, guard bar, ladder, railings, brackets,

gates and similar works.

Providing and fixing carbon steel galvanised ( minimum

coating 5 micron) dash fastener of 10 mm dia double

threaded 6.8 grade (yield strength 480 N/mm2), counter

10.27 sunk head, comprising of 10 m dia polyamide PA 6 grade

sleeve, including drilling of hole in frame , concrete/

masonry, etc. as per direction of Engineer-in-charge.

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and fixing stainless steel ( Grade 304) railing

made of Hollow tubes, channels, plates etc., including

welding, grinding, buffing, polishing and making

curvature (wherever required) and fitting the same with

necessary stainless steel nuts and bolts complete, i/c

fixing the railing with necessary accessories & stainless

steel dash fasteners , stainless steel bolts etc., of

required size, on the top of the floor or the side of waist

slab with suitable arrangement as per approval of

Engineer-in-charge, (for payment purpose only weight of

stainless steel members shall be considered excluding

fixing accessories such as nuts, bolts, fasteners etc.).

Providing M.S. foot rests including fixing in manholes

with 20x20x10 cm cement concrete blocks 1:3:6 (1

19.15 cement : 3 coarse sand : 6 graded stone aggregate 20

mm nominal size) as per standard design :

Providing and fixing in position pre-cast R.C.C. manhole

19.19 cover and frame of required shape and approved quality

19.19.3.1 Circular shape 560 mm internal diameter Each 3.00 ₹ 1,675.70 ₹ 5,027.00

TOTAL (Carried Over to Summary of Civil Works) 0.00 ₹ 35,51,340.00 ₹ 0.00

11.0 FLOORING WORK

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand

: 4 graded stone aggregate) finished with a floating coat

11.3 of neat cement, including cement slurry, but excluding

the cost of nosing of steps etc. complete.

40 mm thick with 20 mm nominal size stone aggregate

Chequerred precast cement concrete tiles 22 mm thick in

footpath &courtyard, jointed with neat cement slurry

mixed with pigment to match the shade of tiles, including

rubbing and cleaning etc. complete, on 20mm thick bed

of cement mortar 1:4 (1 cement: 4 coarse sand).

11.20.1 Light shade pigment using white cement. Sqm 15.00 ₹ 1,402.00 ₹ 21,030.00

Kota stone slab flooring over 20 mm (average) thick base

laid over and jointed with grey cement slurry mixed with

pigment to match the shade of the slab including rubbing

and polishing complete with base of cement mortar 1 : 4

(1 cement : 4 coarse sand) :

Kota stone slabs 20 mm thick in risers of steps, skirting,

dado and pillars laid on 12 mm (average) thick cement

mortar 1:3 (1 cement 3 coarse sand) and jointed with

grey cement slurry mixed with pigment to match the

shade of the slabs, including rubbing and polishing

Extra for pre finished nosing to treads of steps of marble

/ granite stone.

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Extra for marble / granite stone flooring in treads of

11.25 steps and risers using single length up to 2.00 metre. Sqm 77.00 ₹ 851.80 ₹ 65,589.00

Extra for pre finished nosing in treads of steps of Kota

stone/ sand stone slab.

Extra for Kota stone/ sand stone in treads of steps and

11.32 risers using single length above normal size up to 2.00 sqm 16.00 ₹ 44.15 ₹ 706.00

Providing and laying Ceramic glazed floor tiles of size

300x300 mm (thickness to be specified by the

manufacturer), of 1st quality conforming to IS : 15622, of

approved make, in all colours, shades, except White,

Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of

cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing

with grey cement slurry @ 3.3 kg/ sq.m including

pointing the joints with white cement and matching

pigments etc., complete.

Providing & Laying vitrified floor tiles in different sizes (

thickness to be specified by the manufacturer) with

water absorption's less than 0.08% and confirming to IS :

15622 of approved make in all colours and shades, laid

on 20mm thick cement mortar 1:4 (1 cement : 4 coarse

sand) including grouting the joints with white cement

and matching pigments etc, complete.

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and laying Vitrified tiles in different sizes

(thickness to be specified by manufacturer), with water

absorption less than 0.08 % and conforming to I.S.

15622, of approved make, in all colours & shade, in

11.46 skirting, riser of steps, over 12 mm thick bed of cement

mortar 1:3 (1 cement: 3 coarse sand), jointing with grey

cement slurry @ 3.3 kg/ sqm including grouting the joint

with white cement & matching pigments etc. complete.

Providing and laying Polished Granite stone flooring in

required design and patterns, in linear as well as

curvilinear portions of the building all complete as per

the architectural drawings with 18 mm thick stone slab

over 20 mm (average) thick base of cement mortar 1:4 (1

11.56 cement : 4 coarse sand) laid and jointed with cement

slurry and pointing with white cement slurry admixed

with pigment of matching shade including rubbing, curing

and polishing etc. all complete as specified and as

directed by the Engineer-in-Charge.

Polished Granite stone slab colour of Black, Cherry/Ruby

Red or equivalent

TOTAL (Carried Over to Summary of Civil Works) 0.00 ₹ 31,15,024.00 ₹ 0.00

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing gola 75x75 mm in cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 stone aggregate 10 mm and

12.21.1 down gauge), including finishing with cement mortar 1:3 Rmt 348.00 ₹ 305.15 ₹ 1,06,192.00

(1 cement : 3 fine sand) as per standard design : In 75x75

Making khurras 45x45 cm with average minimum

thickness of 5 cm cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate of 20 mm

nominal size) over P.V.C. sheet 1 m x1 m x 400 micron,

finished with 12 mm cement plaster 1:3 (1 cement : 3

coarse sand) and a coat of neat cement, rounding the

edges and making and finishing the outlet complete.

Providing and fixing Heat Resistant Terrace Tiles (300 mm

x 300mm x 20 mm) with SRI (solar refractive index) > 78,

solar reflection > 0.70 and initial emittance > 0.75 on

waterproof and sloped surface of terrace, laid on 20 mm

thick cement sand mortar in the ratio of 1:4 (1 cement :

4 coarse sand) and grouting the joints with mix of white

cement & marble powder in ratio of 1:1, including

rubbing and polishing of the surface upto 3 cuts

complete, including providing skirting upto 150 mm

height along the parapet walls in the same manner.

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and Fixing of 16mm Thick sky lights consisting of Multi cell/tight cell

Polycarbonate Panel System of approved colour, 16 mm thick (minimum)

having uniform in color with an integral Tight-Cell core constructed not to

exceed 4mmx4mm in a cross section, Vertical Standing Seam manufactured at

both sides of the panel. Snap-on connector to interlock the panels shall have a

grip-lock double tooth locking mechanism to ensure maximum uplift capability

MR-7 and shall be of same color as that of panel. Panel shall be factory sealed/end Sq.Mt. 20.00 ₹ 2,857.00 ₹ 57,140.00

welded panels with additional End-cap/Aluminium U-Profile (mill finish) for

ends. Panel shall be co-extruded with special anti glare compound and UV

protected. The full system shall be fitted on MS purlins perpendicular to

direction of sheeting with purlin spacing as specified by Manufacturer. The rate

includes cost of all the operations, labour and all materials and tests (as

applicable) involved such as bolts nuts and screws etc. and labour for cutting

TOTAL (Carried Over to Summary of Civil Works) 0.00 ₹ 6,63,641.00 ₹ 57,140.00

13.0 FINISHING WORK

13.4 12 mm cement plaster of mix :

15 mm cement plaster on rough side of single or half

brick wall of mix :

13.6 20 mm cement plaster of mix :

13.16 6 mm cement plaster of mix :

Extra for providing and mixing water proofing material in per bag of

cement plaster work in proportion recommended by the 50KG

13.21 manufacturers. Cement 2028.00 ₹ 22.10 ₹ 44,819.00

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Extra for plastering exterior walls of height more than 10

13.22 m from ground level for every additional height of 3 m or

Providing and applying plaster of paris putty of 2 mm

13.26 thickness over plastered surface to prepare the surface Sqm 1430.00 ₹ 262.70 ₹ 3,75,661.00

even and smooth complete.

Distempering with 1st quality acrylic distemper, having

VOC (Volatile Organic Compound ) content less than 50

grams/ litre, of approved brand and manufacture,

including applying additional coats wherever required, to

achieve even shade and colour.

Applying one coat of water thinnable cement primer of

13.85 approved brand and manufacture on wall surface :

13.85.3 Water thinnable cement primer. Sqm 4162.00 ₹ 73.95 ₹ 3,07,780.00

Wall painting with acrylic emulsion paint of approved

13.82 brand and manufacture to give an even shade :

13.82.2 Two or more coats on new work Sqm 2419.00 ₹ 137.45 ₹ 3,32,492.00

Finishing walls with water proofing cement paint of

required shade :

New work (Two or more coats applied @ 3.84 kg/10

Finishing walls with Acrylic Smooth exterior paint of

required shade :

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

New work (Two or more coat applied @ 1.67 ltr/10 sqm

13.46.1 over and including priming coat of exterior primer Sqm 10257.00 ₹ 160.60 ₹ 16,47,274.00

applied @ 2.20 kg/10 sqm)

Finishing walls with textured exterior paint of required

New work (Two or more coats applied @ 3.28 ltr/10

13.45.1 sqm) over and including priming coat of exterior primer Sqm 1156.00 ₹ 223.60 ₹ 2,58,482.00

applied @ 2.20kg/10 sqm

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Finishing exterior walls with Ceramic textured finish

with protection coating by Ultratech Texture Paints

(UTTPL) ( Natural - Ceramic/ Stony of approved shade or

approved equivalent make) to external wall surfaces

comprising of water-borne, penetrating, water repellent

EM- primer & super durable water based acrylic silicon

resin clear and super durable dirt and dust resistant

protection coat of FSI Clear coat, which shall be highly

water repellant, Anti-algae & anti-fungal in nature. The

coating shall also cover hairline cracks with application

method which includes 2 coats of E M Primer, 2 coats

(Silmultaneouly) of 100% natural Ceramic & granite

crushed stone , all in approved colour and texture

including preparation of surface, appropriate primer coat

etc. applied as per manufacturer's instructions complete

& project consultant instructions, allow for scaffolding,

staging as required. The finish shall be natural colour/

non pigmented, water repellant, resistant to condensate

formation, cover hairline cracks/ crazing, UV & alkali

resistant & ensure good breathability for the substrate all

to complete as per direction of Engineer-in-charge.

Finishing walls with Deluxe Multi surface paint system for

13.48 interiors and exteriors using Primer as per manufacturers

specifications :

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Painting wood work with Deluxe Multi Surface Paint of

required shade. Two or more coat applied @0.90 ltr/10

13.48.2 sqm over an under coat of primer applied @0.75 ltr/ 10 Sqm 233.00 ₹ 176.25 ₹ 41,066.00

sqm of approved brand or manufacture

13.85 Applying priming coat :

With ready mixed pink or Grey primer of approved brand

13.85.1 and manufacture on wood work (hard and soft wood) Sqm 253.00 ₹ 70.35 ₹ 17,799.00

With ready mixed red oxide zinc chromate primer of

13.50.3 approved brand and manufacture on steel galvanised Sqm 565.00 ₹ 67.40 ₹ 38,081.00

iron/ steel works

Painting with synthetic enamel paint of approved brand

and manufacture to give an even shade :

13.62.1 Two or more coats on new work Sqm 1095.00 ₹ 226.25 ₹ 2,47,744.00

Add for plaster drip course/ groove in plastered surface

or moulding to R.C.C. projections.

Melamine polishing on wood work (one or more coat).

Providing and applying white cement based putty of

average thickness 1 mm, of approved brand and

manufacturer, over the plastered wall surface to prepare

the surface even and smooth complete

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

(Providing and fixing Glass Reinforced Concrete (G.R.C)

Jali in approved size, pattern, design, thickness and color.

The Screens should be made from ‘53 grade’White

Portland Cement manufactured by ‘JK Cement’ or

equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass

Fiber manufactured by ‘Saint Gobain’ or equivalent,

Super Plasticizers manufactured by ‘BASF’ or equivalent,

Polymers manufactured by ‘BASF’ or equivalent and U.V

resistant Synthetic inorganic pigments should be used for

pigmentation manufactured by ‘BAYFERROX (Germany)’

or equivalent. The material casting should take place in

Synthetic Rubber / FRP Mould manufactured by ‘Reckli’

or equivalent. The fixing of Jali should be ‘Dry fixing’ i.e.

to be done with MS/SS ‘L’ shaped Clamps, dash fasteners

and pins etc as per site requirment.)

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Supply and Installation of 6mm thick FR Grade

Aluminium Composite HPL Composite Panel Cladding of

approved color, made out of 5.5mm thick FR grade

mineral core sandwiched between two aluminium sheets

(each 0.25mm thick). The Aluminium HPL Composite

Panel Cladding shall be coil coated with High Durable

resin coating of approved colour with 10 years exterior

warranty and shade on face #1 and polymer (service)

coating on face #2. Installation of panels will be done by

MBE Rivets (with Fixed and Sliding Points) with

recommended Aluminum T section of 75x37x2.8 mm

MR-10 thick and L section 38x38x2.8mm thick held by Aluminum Sqm 20.00 ₹ 7,767.60 ₹ 1,55,352.00

Wall Bracket with Wind load and Dead load slot,

anchored by standard anchor fasteners along with

Thermal Separator. Installation of Panels will be done

using Rear Ventilated Principles only, which is ensured by

providing ventilation gap minimum 200 cm2/ per Meter

(for free flow of air behind the façade) for the façade and

using the framework with no horizontal section. (for all

levels and all height necessary scaffolding, hoisting in

TOTAL (Carried Over to Summary of Civil Works) 0.00 ₹ 113,50,492.00 ₹ 57,06,003.00

16.0 ROAD WORK

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Preparation and consolidation of sub grade with power

road roller of 8 to 12 tonne capacity after excavating

earth to an average of 22.5 cm. depth, dressing to

camber and consolidating with road roller including

making good the undulations etc. and re roller including

making good the undulations etc. and re-rolling the sub

grade and disposal of surplus earth lead upto 50 metres.

Supplying and Stacking of Good Earth by mechanical

16.3.9 transport including loading, unloading including royalty & Cum 4200.00 ₹ 775.50 ₹ 32,57,100.00

carriage up to 5 KM complete.

Spreading of sludge, dump manure and/or good earth in

required thickness as per direction of officer-in-charge

(cost of sludge, dump manure and/ or good earth to be

paid separately).

Extra for compaction of earth work in embankment

16.2 under OMC to give atleast 95% of the MDD(Proctor Cum 3401.00 ₹ 24.85 ₹ 84,515.00

Surface dressing one coat on new surface with bitumen

of specified grade at a rate of 1.95 kg/sqm of surface

area with 1.5 cum of stone chippings 13.2 mm nominal

size per 100 sqm of road surface, including consolidation

with road roller of 6 to 8 tonne capacity , etc. complete :

Using bitumen emulsion (minimum 50% bitumen

content RS grade conforming to IS : 8887)

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and applying tack coat using bitumen emulsion

conforming to IS:8887, using emulsion pressure

distributer including preparing the surface & cleaning

with mechanical broom.

16.31.2 With medium setting bitumen emulsion

16.31.2.2 On bituminous surface @ 0.25kg/sqm Sqm 3720.00 ₹ 14.05 ₹ 52,266.00

PREMIX CARPETING

Providing and laying Bitumen Penetration Macadam with

hard stone aggregate of quality, size and grading as

specified, with bitumen of suitable penetration grade,

including required key aggregate as specified, spreading

coarse aggregate with the help of self propelled/ tipper

tail mounted aggregate spreader and applying bitumen

16.36 by a pressure distributor and then spreading key

aggregate with the help of aggregate spreader complete,

including consolidation with road roller of minimum 8 to

10 tonne capacity to achieve specified values of

compaction and surface accuracy :

For 50mm compacted thickness using coarse aggregate

of size 50-20 mm graded @ 0.60 cum per 10 sqm key

16.36.1 aggregate of size 12.5 mm graded @ 0.15 cum per 10 Sqm 3600.00 ₹ 505.65 ₹ 18,20,340.00

sqm. With paving asphalt grade VG - 10 @ 50 kg/ 10 sqm.

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and laying seal coat over prepared surface of

road with bitumen heated in bitumen boiler fitted with

the spray set spraying using 98 kg of bitumen of grade

VG - 10 and blinding surface with 0.90 cum of stone

16.41 aggregate of 6.7 mm size (Passing 11.2 mm sieve and Sqm 3720.00 ₹ 130.85 ₹ 4,86,762.00

retained on 2.36 mm sieve) per 100 sqm of road surface,

including rolling and finishing with power road roller all

Providing and applying 2.5 mm thick road marking strips

(retro- reflective) of specified shade/ colour using hot

thermoplastic material by fully/ semi automatic

thermoplastic paint applicator machine fitted with profile

shoe, glass beads dispenser, propane tank heater and

profile shoe heater, driven by experienced operator on

road surface including cost of material, labour, T&P,

cleaning the road surface of all dirt, seals, oil, grease and

foreign material etc. complete as per direction of

Engineer-in-charge and accordance with applicable

specifications.

Supplying and stacking of hard stone (for stone pitching)

22.5 cm thick at site.

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and laying C.C. pavement of mix M-25 with

ready mixed concrete from batching plant. The ready

mixed concrete shall be laid and finished with screed

board vibrator , vacuum dewatering process and finally

finished by floating, brooming with wire brush etc.

complete as per specifications and directions of Engineer-

in-charge. (The panel shuttering work shall be paid for

separately). (Note:- Cement content considered in this

item is @ 330 kg/cum. Excess/less cement used as per

design mix is payable/ recoverable separately).

Extra for providing and mixing hardening compound of

16.44 approved quality as per manufacturer’s specification in Litre 300.00 ₹ 55.50 ₹ 16,650.00

cement concrete.

Providing and fixing in position pre-moulded joint filler in per cm

expansion joints. depth

Providing and laying in position bitumen hot sealing depth per

16.46.1 compound for expansion joints etc. Using grade ‘A’ cm width 2100.00 ₹ 8.65 ₹ 18,165.00

sealing compound.

75 mm thick back filling for pitching including supplying

16.74.1 of required materials and consolidation etc. complete Sqm 163.00 ₹ 76.30 ₹ 12,437.00

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Badminton Post - Movable Badminton Poles Made from

40X40X5mm steel square tube with 50kg. of dead

weight. Roller wheels to be provided for facilitating easy

transport and storage. Post provided with mechanical

Winch to support and tighten heavy net. Net Included.

Construction of granular sub-base by providing close

graded Material conforming to specifications, mixing in a

mechanical mix plant at OMC, carriage of mixed material

by tippers to work site, for all leads & lifts, spreading in

uniform layers of specified thickness with motor grader

on prepared surface and compacting with vibratory

power roller to achieve the

desired density, complete as per specifications and

directions of Engineer in-Charge.

With material conforming to Grade-II (size range 53 mm

to 0.075 mm ) having CBR Value-25

Providing, laying, spreading and compacting graded

stone aggregate (size range 53 mm to 0.075 mm ) to wet

mix macadam (WMM) specification including premixing

the material with water at OMC in for all leads & lifts,

laying in uniform layers with mechanical paver finisher in

16.79 sub- base / base course on well prepared surface and Cum 558.00 ₹ 2,914.30 ₹ 16,26,179.00

compacting with vibratory roller of 8 to 10 tonne

capacity to achievethe desired density, complete as per

specifications and directions of Engineer-in-Charge.

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and laying factory made chamfered edge

Cement Concrete paver blocks in footpath, parks, lawns,

drive ways or light traffic parking etc, of required

strength, thickness & size/ shape, made by table

vibratory method using PU mould, laid in required colour

& pattern over 50mm thick compacted bed of sand,

compacting and proper embedding/laying of inter locking

paver blocks into the sand bedding layer through

vibratory compaction by using plate vibrator, filling the

joints with sand and cutting of paver blocks as per

required size and pattern, finishing and sweeping extra

sand. complete all as per direction of Engineer-in-Charge.

60mm thick cement concrete paver block of M-35 grade

with approved colour, design & pattern.

Providing and laying at or near ground level factory made

kerb stone of M-25 grade cement concrete in position to

the required line, level and curvature, jointed with

cement mortar 1:3 (1 cement: 3 coarse sand), including

making joints with or without grooves (thickness of joints

except at sharp curve shall not to more than 5 mm),

including making drainage opening wherever required

complete etc. as per direction of Engineer in-charge

(length of finished kerb edging shall be measured to

calculate volume for payment). (Precast C.C. kerb stone

shall be approved by Engineer-in-charge).

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Painting runway/taxi track/apron marking with adequate

nos of coats to give uniform finish with road marking

paint of superior make as approved by the Engineer-in-

charge, including cleaning the surface of ail dirt, scales,

oil, grease and other foreign material etc. and lining out

16.47.1 New work (two or more coats) Sqm 1838.00 ₹ 188.20 ₹ 3,45,912.00

Providing and fixing concertina coil fencing with punched

tape concertina coil 600 mm dia 10 metre openable

length ( total length 90 m), having 50 nos rounds per 6

metre length, upto 3 m height of wall with existing angle

iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9

horizontal R.B.T. reinforced barbed wire, stud tied with

G.I. staples and G.I. clips to retain horizontal, including

16.53 necessary bolts or G.I. barbed wire tied to angle iron, all Rmt 2630.00 ₹ 375.80 ₹ 9,88,354.00

complete as per direction of Engineer-in-charge, with

reinforced barbed tape(R.B.T.) / Spring core (2.5mm

thick) wire of high tensile strength of 165 kg/ sq.mm with

tape (0.52 mm thick) and weight 43.478 gm/ metre (cost

of M.S. angle, C.C. blocks shall be paid separately)

Supplying at site Angle iron post & strut of required size

including bottom to be split and bent at right angle in

opposite direction for 10cm length and drilling holes

upto 10 mm dia. etc. complete.

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing, laying and making kerb channel 30 cm wide

and 50 mm thick with cement concrete 1:3:6 (1 cement:

3 coarse sand:6 graded stone aggregate 20 mm nominal

size) over 75mm bed of dry brick ballast 40 mm nominal

size, well rammed and consolidated and grouted with

fine sand, including finishing the top smooth etc.

complete and as per direction of Engineer-in-charge.

Providing and laying 500x500x40 mm thick Turf paver

(Turfpave XD) on 150 mm thick sub grade of compacted

bed of 20 mm thick nominal size stone aggregate and

base course and filling with 150 mm thick jamuna sand,

including spreading, well ramming, consolidating and

finishing smooth etc. all complete as per direction of

Engineer-in-charge.

Providing and fixing 10x10x7.50 cm Granite stone block

hand cut and chisel dressed on top, for paving in floors,

drains etc. laid over 20mm thick base mortar 1:4

16.92 (1cement:4 coarse sand) with joints 10mm wide filled Sqm 90.00 ₹ 2,189.15 ₹ 1,97,024.00

with same mortar including ruled pointing etc. complete

as per direction of engineer-in charge.

Providing and laying Non Pressure NP-4 class (Heavy

duty) R.C.C. pipes including collars/spigot jointed with

stiff mixture of cement mortar in the proportion of 1:2 (1

cement : 2 fine sand) including testing of joints etc.

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

TOTAL (Carried Over to Summary of Civil Works) 0.00 ₹ 389,06,747.00 ₹ 1,36,573.10

DSR-2025 HORTICULTURE AND LAND SCAPING

Supplying and stacking at site dump manure from

approved source, including carriage upto 5 km complete

(manure measured in stacks will be reduced by 8% for

2.4.2 Screened through sieve of I.S. designation 16 mm Cu.Mt. 1009.00 ₹ 447.05 ₹ 4,51,073.00

Screened through sieve of I.S. designation 4.75 mm

2.7 Fine dressing of the ground. Sq.Mt. 10188.00 ₹ 5.60 ₹ 57,053.00

Mixing earth and sludge or manure in the required

2.9 proportion specified or directed by the Officer-in-charge Cu.Mt. 6603.00 ₹ 55.70 ₹ 3,67,787.00

Grassing with selection No. 1 grass including watering

and maintenance of the lawn for 60 days or more till the

grass forms a thick lawn, free from weeds and fit for

mowing including supplying good earth, if needed (the

grass and earth shall be paid for separately).

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Digging holes in ordinary soil and refilling the same with

the excavated earth mixed with manure or sludge in the

ratio of 2:1 by volume (2 parts of stacked volume of

earth after reduction by 20% : 1 part of stacked volume

2.14 of manure after reduction by 8%) flooding with water,

dressing including removal of rubbish and surplus earth,

if any, with all leads and lifts (cost of manure, sludge or

extra good earth if needed to be paid for separately) :

2.14.2 Holes 90 cm dia, and 90 cm deep Each 90.00 ₹ 155.50 ₹ 13,995.00

2.14.3 Holes 60 cm dia, and 60 cm deep Each 75.00 ₹ 47.85 ₹ 3,589.00

2.14.4 Holes 45 cm dia, and 45 cm deep. Each 110.00 ₹ 20.65 ₹ 2,272.00

Providing Circular Cement Concrete pots of specified

size, cast with cement concrete of nominal mix 1:2:4 (1

cement: 2 coarse sand: 4 graded stone aggregate 6 mm

nominal size), reinforced with 7 Nos ( 3 nos horizontal &

4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as

2.29 per design, including required form work, finishing with

cement punning on exposed surface, curing for specified

period and stacking in required rows & height, all

complete as per direction of Officer-in-charge.

Top inside dia 35 cm, outer bottom dia 25 cm, total

height 35 cm with wall thickness of 25.4 mm

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing Square Cement Concrete pots of specified size,

cast with cement concrete of nominal mix 1:2:4 (1

cement: 2 coarse sand: 4 graded stone aggregate 6 mm

nominal size), reinforced with 7 Nos ( 3 nos horizontal &

4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as

2.30 per design, including required frame work, finishing with

cement punning on exposed surface, curing for specified

period and stacking in required rows & height, all

complete as per direction of Officer-in-charge.

Top inner width 35 cm, outer bottom width 25 cm, total

height 35 cm and wall thickness 25.4 mm

Providing and laying Neelgiri/Mexican grass turf with

earth 50mm to 60mm thickness of existing ground

prepared with proper level and ramming with tools

wooden (Dhurmos) and than rolling the surface with light

2.33 roller make the surface smoothen and light waterning Sq.Mt. 10188.00 ₹ 257.00 ₹ 26,18,316.00

with sprinkler and maintenance for 30 days or more till

the grass establish properly, as per direction of officer-in-

Supplying & Stacking of Selection No.1 doob grass turf at

site fresh & free from weeds having proper roots in

2.35 green including loading, unloading, carriage and all taxes Sq.Mt. 20188.00 ₹ 64.70 ₹ 13,06,164.00

paid etc.and as per direction of officer in charge.

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Complete maintenance of the entire garden features

having as per yard stick in the garden area i.e. lawn trees,

shrubs, hedge, flower beds, foliages, creepers etc.

including hoeing,weeding pruning replacement of plants,

gap filling, watering, mowing of lawn, grass cutting by

lawn mover and brush cutter , removal of garden waste,

applying insecticide, pesticide & fertilizers(whenever

required) top dressing of lawn with good earth and

2.40 menure and maintenance of other garden related works

as directed by office-in-charge (Cost of Good Earth,

Manure, Fertilizer, Insecticide , Pesticide will be provided

by the Department & lawn mover and brush cutter with

fuel , other T & P material/articles shall be provided by

the contractor.)

Play grounds / Public parks (as per yard stick 1Mali

Complete maintenance of shrubs (Out side garden

features), jobs like making of basin at regular interval i/c

watering, weeding, pruning & application of fertilizer etc, Per Pant/

2.43 (excluding the cost of material which shall be supplied by per 15000.00 ₹ 49.10 ₹ 7,36,500.00

the department) and as per direction of officer in charge. Month

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and applying anti termite treatment of infected

trees i/c all branches/leaves by spraying chemical

emulsion 0.5% (Chlorpyriphos 20% EC) concentration

2.55 through power spray machine (@ 100 ml Chlorpyriphos 425.00 ₹ 84.60 ₹ 35,955.00

per tree i/c cost of chemical) and as per direction of

officer-in-charge.and as per direction of officer-in-charge.

Anti termite treatment of lawn area through premise

30.50% I P. one liter premise diluted in 499 liters water

and applying solution @ 1.00 litre solution per sqm lawn

2.56 or bed area.(two application) i/c cost of chemical)and as Sq.Mt. 20188.00 ₹ 4.10 ₹ 82,771.00

per direction of officer-in-charge.and as per direction of

officer-in-charge.

4.0 Rose Plants

Providing and Displaying plants Budded Rose (H.T.

variety) 3 to 4 healthy branch 30 cm and above ht. well

4.91 developed with one and above flower plant in 20 cm Each 250.00 ₹ 35.80 ₹ 8,950.00

Earthen Pot, as per direction of the officer-in-charge.

Providing and Displaying plants Creeper Rose variety 3 to

4 healthy branch 60 cm and above ht. well developed

4.92 with one and above flowers in 25 cm Earthen Pot, as per Each 175.00 ₹ 80.20 ₹ 14,035.00

direction of the officer-in-charge.

Providing and Displaying plants Standard Rose (H.T.

variety) 3 to 4 healthy branch 90 cm and above ht. well

4.93 developed with one and above flowers in 25 cm Earthen Each 150.00 ₹ 160.40 ₹ 24,060.00

Pot, as per direction of the officer-in-charge.

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

5.0 Ornamental Plants

Providing and Displaying Acalypha plant Different colour

well developed, fresh & healthy with good foliage, multi

5.1 branch 30 to 45 cm ht. in 20 cm size of Earthen Pot/ Each 225.00 ₹ 39.50 ₹ 8,888.00

Plastic Pot bushy plant as per direction of the officer-in-

Providing and Displaying Acalypha red plant well

developed with fresh & healthy 30 to 45 cm ht. in 20 cm

size Earthen Pot/ Plastic Pot as per direction of the

officer-in-charge.

Providing and Displaying Ficus reginold piller type Topiary

plant well developed with fresh & healthy 210 to 240 cm

ht in 40 cm Cement Pot as per direction of the officer-in-

Providing and Displaying Bougainvillea named variety,

Sobhra, Thima, Marry palmar, Cherry Blossom etc. well

developed with fresh & healthy bushy plant in full bloom

75 to 90 cm ht. in 40 cm Cement Pot as per direction of

the officer-in-charge.

Providing and Displaying Ficus Long Island topiary plant

well developed with fresh & healthy 5 to 6 ball specific

5.21 size and shape 120 to 150 cm ht in 40 cm Cement Pot as Each 275.00 ₹ 1,295.50 ₹ 3,56,263.00

per direction of the officer-in-charge.

6.0 Ground Covers Plants

Providing and Displaying of Clerodendron inerme plant of

ht. 30 cm to 40 cm multi branched in 25 cm size of

Earthen Pot / Plastic Pot & as per direction of the officer-

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and Displaying of Iresine herbstii plant, of

height 20-30 cm., full of branches well developed in 20

cm size of Earthen Pot / Plastic Pot & as per direction of

the officer-in-charge..

Providing and Displaying of Wadelia trilobata plant,full of

6.31 leaves in 15 cm size of Poly bags & as per direction of the Each 250.00 ₹ 16.85 ₹ 4,213.00

officer-in-charge.

7.0 Tree Plants

Providing and stacking of Polyalthia longifolia (Ashok) of

7.75 height 180-195 cm. in gunny bag of size 30 cm as per Each 750.00 ₹ 108.35 ₹ 81,263.00

direction of the officer-in-charge.

Supply and stacking of Washingtonia filifea palm plant

stem ht. 120-135 cm with 8-10 healthy leaves lush green

leaves well developed in big size HDPE Bags as per

direction of the officer-in-charge.

TOTAL (Carried Over to Summary of Civil Works) 0.00 ₹ 86,70,815.00 ₹ 0.00

21.0 ALUMINIUM & STRUCTURAL GLAZING WORK

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and fixing aluminium work for doors, windows,

ventilators and partitions with extruded built up standard

tubular sections/appropriate Z sections and other

sections of approved make conforming to IS: 733 and IS :

1285, fixed with rawl plugs and screws or with fixing

clips, or with expansion hold fasteners including

necessary filling up of gaps at junctions, at top, bottom

and sides with required PVC/neoprene felt etc.

21.1 Aluminium sections shall be smooth, rust free, straight,

mitred and jointed echanically wherever required

including cleat angle, Aluminium snap beading for glazing

/ paneling, C.P. brass / stainless steel screws, all

complete as per architectural drawings and the

directions of Engineer-in-charge. Glazing and paneling to

be paid for separately) :

21.1.1 For fixed portion.

Powder coated aluminium (minimum thickness of

powder coating 50 micron)

For shutters of doors, windows & ventilators including

providing and fixing hinges/ pivots and making provision

for fixing of fittings wherever required including the cost

of EPDM rubber / neoprene gasket required (Fittings

shall be paid for separately)

Powder coated aluminium (minimum thickness of

powder coating 50 micron)

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and fixing 12 mm thick prelaminated particle

board flat pressed three layer or graded wood particle

board conforming to IS: 12823 Grade l Type ll, in

panelling fixed in aluminum doors, windows shutters and

partition frames with C.P. brass / stainless steel screws

etc. complete as per architectural drawings and

directions of engineerin-charge.

Pre-laminated particle board with decorative lamination

Providing and fixing glazing in aluminium door, window,

ventilator shutters and partitions etc. with EPDM rubber

/ neoprene gasket etc. complete as per the architectural

21.3 drawings and the directions of engineer-in-charge . (Cost

of aluminium snap beading shall be paid in basic item):

With float glass panes of 5 mm thickness (weight not less

than 12.50 kg/sqm)

With float glass panes of 8 mm thickness (weight not less

than 20 kg/sqm)

Filling the gap in between aluminium frame and adjacent

RCC/Brickwork/ Stone Work by providing weather silicon

21.8 sealant over backer rod of approved quality as per

architectural drawings and direction of Engineer-in-

21.8.1 Upto 5mm depth and 5mm width metre 814.00 ₹ 96.75 ₹ 78,755.00

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and supplying aluminium extruded tubular and

other aluminium sections as per the architectural

drawings and approved shop drawings , the aluminium

quality as per grade 6063 T5 or T6 as per BS

1474,including super durable powder coating of 60-80

microns conforming to AAMA 2604 of required colour

and shade as approved by the Engineer-in-Charge. ( The

item includes cost of material such as cleats, sleeves,

screws etc. necessary for fabrication of extruded

aluminium frame work. Nothing extra shall be paid on

this account). The weight of aluminium extruded section

shall be taken for purpose of payment.

Aluminium Louver

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Supply and installation of Exterior Aluminium Vertical

Louvers ARF200 Vertical Fin System, in different sizes as

per drawing. Louvers to be made with Aluminium Box

Tube sections and covered with Solid Aluminium Sheet

pre-coated on a continuous reverse roller colour coating

line with high durable paint in approved colour. The top

coated surface shall be pre coated. Post painting by way

of powder coating or spray coating is not allowed. Colour

MR-12 consistency with pre coating is desired. Welding is not Rmt. 20.00 ₹ 14,277.00 ₹ 2,85,540.00

acceptable. Blades to be mechanically secured to allow

for replacement in case of damage. Fasteners to be hex

head. All the fasteners should be mechanically fastened.

Louvers must be factory fabricated and finished so that

only assembly / installation will be done at the site.

TOTAL (Carried Over to Summary of Civil Works) 0.00 ₹ 9,69,868.00 ₹ 2,85,540.00

22.0 WATER PROOFING

Providing and laying water proofing treatment to vertical

and horizontal surfaces of depressed portions of W.C.,

kitchen and the like consisting of :

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

(i) Ist course of applying cement slurry @ 4.4 Kg/Sqm

mixed with water proofing compound conforming to IS

2645 in recommended proportions including rounding

off junction of vertical and horizontal surface. (ii) IInd

course of 20mm cement plaster 1:3 (1 cement : 3 coarse

sand) mixed with water proofing compound in

recommended proportion including rounding off junction

of vertical and horizontal surface. (iii) IIIrd course of

applying blown or residual bitumen applied hot at 1.7 Kg.

per Sqm of area. (iv) IVth course of 400 micron thick PVC

sheet. (Overlaps at joints of PVC sheet should be 100 mm

wide and pasted to each other with bitumen @ 1.7

Supplying and Stacking Filling sunken floor with over

burnt jhama brick aggregate 120mm to 40mm including

compacting of materials complete as specified and

directed for all levels.

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and laying integral cement based water

proofing treatment including preparation of surface as

required for treatment of roofs, balconies, terraces etc

consisting of following operations: (a) Applying a slurry

coat of neat cement using 2.75 kg/sqm of cement

admixed with water proofing compound conforming to

IS. 2645 and approved by Engineer-in-charge over the

RCC slab including adjoining walls upto 300 mm height

including cleaning the surface before treatment. (b)

Laying brick bats with mortar using broken bricks/brick

bats 25 mm to 115 mm size with 50% of cement mortar

1:5 (1 cement : 5 coarse sand) admixed with water

proofing compound conforming to IS : 2645 and

approved by Engineer-in-charge over 20 mm thick layer

of cement mortar of mix 1:5 (1 cement :5 coarse sand)

admixed with water proofing compound conforming to IS

: 2645 and approved by Engineer-in-charge to required

slope and treating similarly the adjoining walls upto 300

mm height including rounding of junctions of walls and

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

(c) After two days of proper curing applying a second

coat of cement slurry using 2.75 kg/ sqm of cement

admixed with water proofing compound conforming to IS

: 2645 and approved by Engineerin- charge. (d) Finishing

the surface with 20 mm thick jointless cement mortar of

mix 1:4 (1 cement :4 coarse sand) admixed with water

proofing compound conforming to IS : 2645 and

approved by Engineerin- charge including laying glass

fibre cloth of approved quality in top layer of plaster and

finally finishing the surface with trowel with neat cement

slurry and making pattern of 300x300 mm square 3 mm

deep. (e) The whole terrace so finished shall be flooded

with water for a minimum period of two weeks for curing

and for final test. All above operations to be done in

order and as directed and specified by the Engineer-in-

With average thickness of 120 mm and minimum

thickness at khurra as 65 mm.

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and laying APP (Atactic Polypropylene Polymer)

modified prefabricated five layer 3 mm thick water

proofing membrane, black finished reinforced with non-

woven polyester matt consisting of a coat of bitumen

primer for bitumen membrane @ 0.40 litre/sqm by the

same membrane manufacture of density at 25°C, 0.87-

0.89 kg/ litre and viscocity 70-160 cps. Over the primer

coat the layer of membrane shall be laid using Butane

Torch and sealing all joints etc, and preparing the surface

complete. The vital physical and chemical parameters of

14.91.1 the membrane shall be as under : Joint strength in Sqm 383.00 ₹ 560.95 ₹ 2,14,844.00

longitudinal and transverse direction at 23°C as 650/

450N/5cm. Tear strength in longitudinal and transverse

direction as 300/250N. Softening point of membrane not

less than 150°C. Cold flexibility shall be upto -2°C when

tested in accordance with ASTM, D - 5147. The laying of

membrane shall be got done through the authorised

applicator of the manufacturer of membrane : 3 mm

Extra for covering top of membrane with Geotextile, 120

gsm non woven, 100% polyester of thickness 1 to 1.25

mm bonded to the membrane with intermittent touch by

heating the membrane by Butane Torch as per

manufactures recommendation.

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and applying integral crystalline slurry of

hydrophilic in nature for waterproofing treatment to the

RCC structures like retaining walls of the basement,

water tanks, roof slabs, podiums, reservior, sewage &

water treatment plant, tunnels / subway and bridge deck

etc., prepared by mixing in the ratio of 5 : 2 (5 parts

integral crystalline slurry : 2 parts water) for vertical

surfaces and 3 : 1 (3 parts integral crystalline slurry : 1

part water) for horizontal surfaces and applying the same

from negative (internal) side with the help of synthetic

fiber brush. The material shall meet the requirements as

22.23 specified in ACI-212-3R-2010 i.e by reducing permeability

of concrete by more than 90% compared with control

concrete as per DIN 1048 and resistant to 16 bar

hydrostatic pressure on negative side. The crystalline

slurry shall be capable of self-healing of cracks up to a

width of 0.50mm. The work shall be carried out all

complete as per specification and the direction of the

engineerin-charge. The product performance shall carry

guarantee for 10 years against anyleakage.

22.23.1 For vertical surface two coats @0.70 kg per sqm Sqm 261.00 ₹ 472.90 ₹ 1,23,427.00

22.23.2 For horizontal surface one coat @1.10 kg per sqm. Sqm 214.00 ₹ 362.80 ₹ 77,639.00

TYPE RESIDENCES EXTERNAL DEVELOPMENTS COLLEGE OF HORTICULTURE, MORENA

DSR-2023 DESCRIPTION UNIT Total, Qty. RATE DSR Amount NDSR Amount

Providing and applying of swellable type water stop tape,

19mm x 25mm thick in linear meter (expansive nature)

for construction joints treatment of RCC structure such

as raft slab, retaining walls, water storage tank and at the

junctions of raft slab with the retaining walls etc.. After

cleaning the surface, one coat of required primer for

swellable water stop tape shall be applied throughout

the length of the joint @3.78 litre per 240 running meter.

Over the primed surface swellable type water stop tape

shall be placed. The work shall be carried out all

complete as per specification and the direction of the

engineer-in-charge. The product performance shall carry

guarantee for 10 years against any leakage.

TOTAL (Carried Over to Summary of Civil Works) ₹ 10,97,075.00 ₹ 0.00

Total of DSR & NDSR ₹ 1740,58,082.10

EXTERNAL DEVELOPMENT COLLEGE OF HORTICULTURE, MORENA

COLLEGE OF HORTICULTURE AT MORENA (M.P.)

Name of Project: Comprehensive External Infrastructure Development including Type-IV & Type-VI

Residential Units, Main Entrance Gate, Boundary Wall, Underground Water Tank, Sewage Treatment Plant

and other miscellaneous works at Morena (M.P.), under RLBCAU.

EXTERNAL ELECTRICAL WORKS (AS PER DSR 2025)

S.NO NAME OF SUB-HEAD

Scheduled items Non Scheduled items

1 SUB HEAD -I SUBSTATION WORK ₹ 6,656,095.00 ₹ 10,095,871.52

3 SUB HEAD- III : EARTHING ₹ 1,911,591.00 ₹ 0.00

4 SUB HEAD-IV: CABLE & END TERMINATIONS ₹ 519,822.00 ₹ 3,211,738.34

5 SUB HEAD-V : EXTERNAL LIGHTING ₹ 1,513,300.00 ₹ 2,627,327.59

Digitally signed by A

EXTERNAL DEVELOPMENT COLLEGE OF HORTICULTURE, MORENA

COLLEGE OF HORTICULTURE AT MORENA (M.P.)

Name of Project: Comprehensive External Infrastructure Development including Type-IV & Type-VI Residential Units, Main Entrance Gate, Boundary Wall, Underground Water Tank, Sewage Treatment Plant and other miscellaneous

works at Morena (M.P.), under RLBCAU.

EXTERNAL ELECTRICAL WORKS (AS PER DSR 2025)

AS PER DSR-2025 AS PER MARKET RATE

S.NO DSR ITEMS DESCRIPTION OF ITEM UNIT QTY.

RATE (RS.) AMOUNT (RS.) RATE (RS.) AMOUNT (RS.)

SUB HEAD -I SUBSTATION WORK

NDSR-2.1 HT Metering Panel (SEB's)

Supplying / Receiving, Installation, Testing and Commissioning of Powder coated, 14 SWG CRCA sheet steel

enclosed 11KV H.T. Metering Panel complete with the following:

1set of 11/ √3KV / 110/ √ 3 Volt, 100 VA burden & accuracy class 0.5, single phase construction, dry type cast

3 Nos. of dual core 50/5A, 15 VA burden, accuracy class CL 0.5, 33 KV cast resin CTs

One Set of Phase Indicating Lamps.

2 Sets of HRC fuses with fuse base (H.T. Fuse - 1A & LT fuse 2-6A).

2 Nos. indoor cable end box suitable for 3C x 240 sq.mm. 11 KV(E), aluminium conductor XLPE Ar. cable

(Incoming & Outgoing cable).

1 No. SEB approved digital Trivector meter with MDI in KVA of accuracy class - 0.5.(Accuracy class shall be as

per local board)

Note: The contractor shall get the Trivector meter, CTs' & PT tested by SEB and the charges for liasioning for the

same will be paid extra.

SITC Rate for Metering Panel as described above Set 1.00 207,309.13 207,309.13

Note: The contractor shall ensure that the above panel meets the requirement as insisted by State/Local

authorities(As per SEB) for satisfactory operation and as per the Drawings

NDSR-2.2 HT Panel Main Switchgear Room

Design, manufacture, supply, delivery including supervision during installation, testing and commssioning of 1

panel, 11KV HT VCB switch board with following accessories: type tested Indoor Air insulated 11KV up to

2500A, 26.3kA / 40kA (3sec), 3 Phase, metal clad, horizontal draw out type Switchboard with vacuum circuit

breaker. Panel will be manufactured by OEM only

a. One No. incoming panel equipped with following:-

630A, 11KV, VCB 25 KA, TP, totally enclosed, air insulated metal clad housing, cassette mounted horizontal

isolation, horizontal drawout type, motorised spring charged, manually operated, trip free, vaccum circuit breaker

(VCB) having double isolation features and control devices complete with mechanical with continous tripping &

closing, coil suitable for 24V DC, shunt trip coil, OFF/ON indicators, mechanical operation counter & provided

with following:

Spring charge / discharge mechanical OFF push buttons for emergency trip (test / service position limit switches

with 6 NO/6 NC breaker auxiliary contacts in service position and The cubicle shall be of LSC 2B (Loss of Service

Continuity) and PM (Partition Class) classes as defined by IEC standard 62271-200. And it shall comprise three

high voltage compartments and one LV cabinet

CT chamber with single wound single phase, dual core cast resin CT, 15VA burden with core-1 for metering (CL-

1) and core-2 for protection (CL-5P10) and of 110/5+5A ratio.

Wireless communication energy sensor that monitors and measures energy and power in real-time is required so

that can count on operational efficiency and uptime.

Microprocessor based relay, IDMT, Time delay with 3 elements for over current (50-200%) and 1 element for

earth fault protection(10-40%) .-1 Set

Antipumping relay & master trip relay- 1 Set

Digitally signed by A

EXTERNAL DEVELOPMENT COLLEGE OF HORTICULTURE, MORENA

Digital Ammeter with selector switch.-1 Set

A set of breaker ON/OFF/Trip/DC control supply/ Spring Charged indication lamp. 1 Set

Emergency trip push button on front door 1 Set

Limit switches with 6 NO/ 6 NC breaker auxiliary contacts 1 Set

Control:- T-N-C (Trip, Neutral, Close) breaker control switch. 1 Set

Space heater with thermostat for moisture absorption. 1 Set

Suitable for connection to 2 Runs x 3 core x 300 sq.mm. Cross linked polythelene (XLPE) 33KV cables or as

called for. 1 Set

HT Danger Plate 1 Set

Hooter low intensity 24 Volt with acknowledge and reset push button 1 Set

6-window microprocessor based annunciation panel with audio and visual indicator.

Over current & earth fault - 2 windows

Master trip operated - 1 window

Spare - 3 windows

Surge Arrestor, 10KA, Class II 1 Set

Thermal monitoring shall be fitted on HV field cable/busbar connections,The monitoring shall be done by a battery

less sensor that communicates wirelessly using Zigbee Green Power protocol.

Incoming as described above.

800A, 11KV, 25 KA, 3 phase, air insulated Electrolytic grade copper bus bars

c.Feeder panel for, equipped with following :-

4 nos. 630A, VCB 11KV 25 KA, TP, Totally enclosed, air insulated, metal clad housing, cassette mounted

horizontal isolation, horizontal drawout type, motorised spring charged, manually operated, trip free,each vaccum

circuit breaker having double isolation features and control devices complete with mechanical with continous

tripping & closing, coil suitable for 24V DC, shunt trip coil OFF/ON indicators mechanical operation counter &

provided with each feeder following:

Spring charge / discharge mechanical OFF push buttons for emergency trip (shrouded) test / service position limit

switches with 6 NO / 6 NC breaker auxliary contacts in service position.The busbars shall be rated for continuous

current, at 40°C ambient temperature. Temperature rise shall be as per IEC 62271-200.

The bus bars shall be sleeved for full voltage. Sleeve shall be heat shrinkable BTPM type of Reychem / equivelent

make. No PVC sleeving in bus bar for 11KV is acceptable

CT chamber with Dual core, single phase, Single ratio cast resin CT, 15VA burden with core-1 for metering (CL-

1) ,core-2 for protection (CL-5P10)

Digital Ammeter with selector switch, shrouded terminals, square size.The busbars shall be located in a separate

metal clad chamber and shall be air insulated. Bus bars shall be extendible on either side

Microprocessor based IDMT instantaneous relay with 3 O/C (50-200%) & one E/F protection (10-40%). To

maintain safety of the Indoor switchgear & Human resources in case of any internal ARC fault and also minimize

the damage, maintenance cost and downtime of the system, the system should have ARC flash protection system

with ACTIVE Arc flash protection

Antipumping relay & master trip relay

A set of breaker ON/OFF/Trip/DC control supply/Trip circuit healthy & R,Y, B phase indication lamps.

Required Auxiliary relays for WTI (Winding temperature indication with alarm & trip)

8-window annunciation panel with audio and visual indication

Over current & earth fault - 2 windows

Winding temperature trip alarm - 2 window

Master trip operated - 1 window

Spare window - 2 1 Set

Emergency trip push button on front door 1 Set/Panel

Limit switches with 6 NO/ 6 NC breaker auxiliary contacts 1 Set/Panel

Control:- T-N-C (Trip, Neutral, Close) breaker control switch. 1 Set/Panel

All control wiring with protection & test terminal block as required. 1 Set/Panel

Space heater with thermostat for moisture absorption. 1 Set/Panel

Cable box suitable for connection for 3C x 300sq.mm 33KV XLPE Al. conductor cable.1 set/pan

HT Danger Plate 1 Set/Panel

75X6mmAl earth bus to be provided for full length of the panel

Outgoing as described above. 3 SET

Digitally signed by A

EXTERNAL DEVELOPMENT COLLEGE OF HORTICULTURE, MORENA

HT Panel as described above (1 No.Incoming / 3 No Outgoing Panel) Set 1 1,889,536.33 1,889,536.33

DSR2025-24.6 Supply, installation, testing and commissioning of following capacity

(continuous loading) BEE 5 Star rated (Corresponding Level as per BIS

amended upto date of receipt of tender) , 11/0.433 KV step down, 3 Phase,

50 Hz, Dyn 11 vector group, ONAN (Oil Natural Air Natural) copper wound

transformer (Electrolytic grade 99.9% pure copper, Core made of first

grade Cold Rolled Grain Oriented (CRGO) Core grade MOH or better,

suitable for out door/indoor applications with On Load Tap Changer (OLTC)

on HV side having AVR relay and Remote Tap Changer Control (RTCC) for

automatic sensing of incoming voltage, automatic operation of OLTC and

facility for remote and manual operation of OLTC HV side in range of +5% to

-15% in steps of 2.5%, having cable end boxes on HV side suitable for

3x300 sqmm XLPE cable of 11 KV grade, including bus trunking

arrangement on LV side including supplying and laying of copper conductor

multicore control cable from transformer to HT breaker/panel for safety

tripping, complete with all accessories and safety provisions as per relevant

IS Code including first filling of filtered dehydrated oil, i/c supplying and

grouting of suitable M.S. Channel with all accessories and transformer shall

be confirming to IS : 2026 (Part 1 to Part 5), IS : 1180 and duly ISI Marked and

as per CPWD specifications complete in all respects etc as required at site.

The maximum flux density in any part of the core and yoke at rated voltage

and frequency shall be such that the flux density with + 12.5 percent

combined voltage and frequency variation from rated voltage and frequency

does not exceed 1.9 Tesla. The permissible temperature-rise shall not

exceed 35 dg.C for oil and 40 dg. C up to 200 KVA and 40 dg.C for oil and 45

dg. C for above 200 KVA for winding. Inside of tank shall be painted with

varnish or liquid resistant paint. For external surfaces one coat of thermo

setting powder paint or one coat of epoxy primer followed by two coats of

polyurethane base paint shallbe used. IS: 1180 (Part 3) shall be referred to

for paint thickness for normal to medium corrosive atmosphere. For highly

polluted atmosphere and special application external paint work shall be as

per direction of Engineer-in-Charge. Design ambient condition : a) air

temperature 50 deg C, b) Relative Humidity 90 % Max, c) Seismic Zone as

per location of site, d) Altitude as per location/site. Noise level Shall not

exceed limits as per NEMA TR-1 with all accessories running measured as

per IEC 551 / NEMA standard. The transformer should have QR code which

should contain drawing, test report OEM manual,Geo- Tag of manufacturing

location etc. Marking Each transformer shall be provided with rating plate

made of anodized aluminum/ stainless steel material securely fixed on the

outer body, easily accessible,as per IS: 1180 Part-3. The entries on the rating

plate shall be indelibly marked.

Fitting and Accessories : The following fittings shall be provided:- a) Two

earthing terminals with the earthing symbol b) Oil level gauge indicating oil

level at minimum, 30°C and maximum operating temperature; c) Air release

device (for non-sealed type transformers) d) Rating and terminal marking

plates; e) Silica gel breather f) Drain-cum-sampling valve (¾″ nominal size

thread, IS 554) preferably steel with plug for three phase transformers; g)

Thermometer pocket with cap; h) Oil filling holes having (1¼″ nominal size

thread) with cover (for sealed type transformers without conservator); i)

Lifting lugs for the complete transformer as well as for core and winding

assembly; j) Pressure relief device or explosion vent above 200 kVA; k) One

filter valve on the upper side of the tank (for transformers above 200 kVA); l)

Unidirectional flat rollers (for transformers above 200 kVA); m) Inspection

hole (for transformers above 200 kVA); n) HV side neutral grounding strip

(where one of the HV bushing terminal is connected to earth);

o) Buchholz relay for transformers above 800 kVA. p) Arcing horns or

Digitally signed by A

EXTERNAL DEVELOPMENT COLLEGE OF HORTICULTURE, MORENA

suitable rating lightning arrestors for HT side – 3 Nos. q) Bird guard; r) Oil

temperature indicator and winding temperature indicators for transformers

above 200 kVA with suitable tripping mechanism above permissible limit s)

Jacking pads (for transformer above 1600 kVA); t) Additional Neutral

separately brought out on bushing for earthing. u) Magnetic oil level gauge

(for transformer above 1600 kVA) with low oil level alarm contact; v) Non

return valve (for conducting pressure test); w) Pressure relief device or

explosion vent x). Monogram Plate y) Inspection cover z). Detachable type

radiators with top and bottom shutoff valve. aa) Oil Conservator with Oil level

indicator, minimum level marking and drain plug for all transformers of

capacity 50 KVA and above. bb) Necessary hardware, clamps, lugs etc. for

termination on HV/MV etc. for all transformers.

SUPPLY OF 1250 KVA, 11KV/433 VOLT TRANSFORMER (OIL FILLED) WITH ON LOAD TAP CHANGER.BEE-5

Transformer described as above Set 2 3061049 6,122,098.00

Supply, Installation, testing and commissioning of 100 AH capacity, 24V DC maintenance free SMF Batteries in fully charged

condition, including painted MS stand & spill proof plastic trays etc.complete as required as per specifications.

MR-2.3.2 Supply, Installation, Testing & Commissioning of Battery Charger Unit with provisions of "Boost Charging" and "Float Charging",

suitable for 240V, single phase, AC, 50Hz supply system & 24V DC including providing required MCB for DC supply No 3 17,491.71 52,475.12

distribution to panel complete as required.

MR-2.3.3 Supply and fixing in position the approved "shock treatment charts" framed in teak wood frame and covered with glass in front

as required in two languages (Hindi & English)

MR-2.3.4 Supply & fixing of Mimic diagram for overall schematic of power distribution complete as required. Set 6 5,326.69 31,960.16

MR-2.3.5 Supply and fixing in position the best quality "Danger Boards" of approved shape and size as specified by Local Electricity

Authorities written in English and Local languages.

MR-2.3.6 Supply & Laying of non skid Electro mat 1 mtr wide and 3.0 mm thick 11 KV grade conforming to IS 15652 as required including

cutting to required length complete as per requirement of local electricity authorities.

MR-2.3.7 Supply of fire buckets 5 nos. 15 litre capacity duly filled with fine sand and fixed on an angle iron frame as per requirement of

local authorities. The fire buckets shall be painted red from outside and white from inside, including lettered as FIRE with white Set 3 6,838.32 20,514.97

colour with extra handle at bottom.

MR-2.3.8 Supply & Laying of non skid Electro mat 1mtr wide and 2.0 mm thick 11 KV grade IS 15652 as required including cutting to

required length complete as per requirement of local electricity authorities.

MR-2.3.9 Supply of Rubber hand gloves 11 KV grade, as per IS 4770-1968. Pair 9 1,223.70 11,013.30

MR-2.3.10 Supply of standard first aid box as approved by Indian red cross society/ St.John Ambulance Brigade and conforming to IS

MR-2.3.11 Supply & Installation of Earthing Trucks (Casette type) of same Make as HT Panel complete as required. Set 3 178948.09 536,844.26

Supply, Receiving, shifting, laying, testing and commissioning of following 1100V grade PVC insulated armoured copper

conductor control cables on existing cable tray/ trench as per specifications including of all clamps/ saddles/screw and cable

identification tags etc. complete as required including termination of the following sizes of PVC insulated Copper conductor

cable including providing terminal lugs,single compression gland , crimping the joints ,providing insulation tape,effecting

terminal connections to the equipment.(For HT Panel controls, Transformer Protection, PLC controls.

Supplying, Receiving, shifting, and commissioning of following sizes of 11 KV grade XLPE insulated aluminium conductor

armoured power cables conforming to IS : 7098 (Part-II) laid buried in ground / trench / existing Hume pipe / PVC pipe / GI pipe

in an approved manner complete as required and as per specifications including excavation of trench in all classes of soil,

including supply and provision of sand bed above the cable and below the cable with supply and laying of 1st class brick

protection back filling of the trench with excavated earth free from boulders after laying and dressing of the cable in an approved

manner complete as required as per IS1255 and as per drawing.

Digitally signed by A

EXTERNAL DEVELOPMENT COLLEGE OF HORTICULTURE, MORENA

Laying of one number XLPE power cable of 11KV grade of following size in the existing RCC/HUME/METAL pipe as required.

22.3.2 a. Above 120 sq. mm and upto 400 sq. mm Metre 160 170 27,200.00

DSR-23.4 Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs

suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including

lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :

MAIN LT PANEL as per IEC 61439-1&2 and IEC 61641 for 0.3 sec min

Suppy , installation, testing, Design, manufacture, supply inspection, Handling, Assembling, Affecting Proper

Connections, Testing and commissioning of 1.6/2mm CRCA sheet steel fabricated cubical type Main L.T. Panel

with PLC base (INTER LOCKING MAINS , D.G. Supply & Bus Couplar), Floor Mounting, Dust & Vermin Proof,

Front Operated Construction, Enclosure IP42 Class after proper treatment with 7 tank process with top/bottom

removable gland plates, as required, double compression type cable glands, earth bus, hinged and lockable doors to

achieve dust and vermin proof complete with all inter connections small wiring by min. 2.5 sq. mm. FRLS copper

wires, ckt labels etc. The panel feeders shall be suitable for terminating suitable nos. 3.5 / 4 core armoured

aluminium cable or Aluminium Bus Duct as required.

All ACB Shall have Zone selective interlocking and LCD display for Current, Voltage & Energy metering and trip

cause history, EDO Type with Microprocessor based release & Icu=Ics=Icw

The electronic trip unit shall have the following adjustable ‘pick-up’ settings for protection characteristics where

specified. It shall be possible to configure protection characteristics based on adjustable time delay settings. a.

Overload Protection [L] (adjustability 40% to 100% of breaker rating), with option to deactivate protection for

special application. b. Short Circuit Protection [S] (1.5 times to 10 times overload setting), with time delay

adjustability up to 0.5s c. Instantaneous Protection [I] (similar in pickup range to short circuit settings) d. Ground

fault protection (G) - current adjustable up to 1 x In, with an option to deactivate protection, time delay

adjustability up to 1s.

All EDO ACB shall have ready to close indication on panel door.

There shall 96X96 display Meter for each outgoing for display of all parameters like V,I,Pf, load profile etc.

All ACB Shall have communication port to provide status (ON/OFF/TRIP) to software or BMS, Required

hardware need to consider.

Circuit breakers shall comply with definitions given by standard IEC 61000-4-4 (Electrical fast transients) on

Trip causetocontext

Electromagnetic

and recordscompatibility (EMC) at fingertips through mobile app / software or trip unit display.

should be accessible

Any additional mobile app/ software shall be offered by default without any additional cost. Following breaker

health and diagnostics information shall be available. a. Trip cause details and interrupted current at the time of

fault b. Last 30 trip records with time stamp c. Overload and ground fault pre alarm d. Trip counter e. Real time

RMS current measurements, unbalance current, maximum current etc.

All ACB shall have roatable terminal adobters on input and output side & adjustable Neutral (OFF, 50%, 100%)

All ACB release shall have Over temperature protection & Indication

All ACB release shall have continious rated triping and closing coils & Dual Core Rogowski CT for metering and

protections & No derating till 55 deg C

All Incomer ACB Should be should be communicable on software platform with on/off/trip status.

All incomer ACBs should come with thermal sensors temperature sensors for continous thermal monitoring of

critical junctions within switchboard such as cable terminations, HBB VBB joints, shipping plates etc. should be

provided to prevent system against fire hazards.The monitoring shall be done by a battery less self powered sensor

Cable alley shall have a sensor capable of monitoring the cable overheating situations leading to fire or fire hazard.

This is required to provide protection against fires arising out of cable alleys because of loose connections or

ageing. This sensor shall be capable of analyzing gas and particles in the air and sending alerts before any smoke or

Sensor shall be able to analyze gases and microparticles inside the switchboard, applying a smart algorithm to sort

internal cable issues from overheating, and sending alerts.Data of sensor should be available on Modbus TCP/IP

for easy integration with EMS BMS.

Digitally signed by A

EXTERNAL DEVELOPMENT COLLEGE OF HORTICULTURE, MORENA

All electronic components in the trip unit shall withstand temperatures up to 105 °C. If temperature exceeds

105°C, there shall be provision for a visible alarm on LED

Communication Architecture need to be considered with minimum 50 device licenses and panel builder need to

quote accordingly.

ACB’s electronic trip unit shall be equipped with a self-test continuously check healthiness connection between

the electronic trip unit, the current transformers and the actuator.The self-test will be of positive logic and visible

All MCCB shall have Built-in μP based trip unit having protection functions LSIG. Variable current setting for

L,S,I and G and variable time delay setting for L,S and G. Neutral O/L protection possible with 3P MCCB (with

All meter at incomer level shall have minimum 128 sample per cycle,Acuuracy class 0.2s and compliance to IEC

62053-22 for active energy and IEC 62053-24 for reactive energy measurement, should be capable of Individual

Harmonics measurement up to 63rd and compliance to relevant IEC standard IEC 61000-3. should be capable for

All MCCB shallVariable setting of LSIG type trip unit

Manufacturer should provide the Discrimination cordination study upto the bus fault level for all ACB/MCCB.

All starter feedrs shall have MPCB as S/C protection device with built in O/L relay and Contactor (As per type 2

Co-Ordination chart of OEMs)s need to be selected as per Type -2 coordination cahrt of respective OEMS.

GA drawings shall be got approved from Owners / Architects / Consultants before fabrication.The panel has to be

specifically fabricated as per the space available at Site. The Existing Column Positions Will also be Considered.

LT PANELS & DISTRIBUTION PANELS

The contractor shall consider the following details in their item rates, wherever required:

1 Supporting rigid steel framework.

2 Cubicle type, 14 gauge CRCA sheet steel enclouser.

3 Complete with interconnections and distribution bus bars.

4 Proper bonding to earth.

Painting/lettering on Breakers and distribution boards, the location they serve, providing on each panel its circuit

6 Providing cable clamps / supports within distribution boards cable alley.

7 TPN ACB’s / MCCB’s shall mean 3 pole ACB’s / MCCB’s with adequate size of neutral link.

8 All MCB’s shall be of minimum 10 KA breaking capacity.

9 All motor feeders MCCBs shall be of motor duty.

10 Distribution panels shall be Powder Coated with Siemens gray paint shade no. RAL-7032 of IS-5.

11 Degree of protection for following type of distribution panel enclosure shall be as per IS:13947-1993.

12 IP 42 for indoor panels.

13 IP 54 for kitchen and laundry panels.

14 IP 55 for outdoor panels

15 All MCCB’s shall be provided with operating mechanism for door interlock.

Current density of aluminium shall be 1 sq mm for 1.0 amps for rated current of bus bars and current density of

16 copper shall be 1 sq.mm for 1.25 amps for rated current of bus bars.

17 Tinned copper earth bus shall be provided through out the length of each board.

All measuring instruments (Meters) shall be of digital electronic with LED of approved make and compatible with

19 All hinged door shall be earthed through 4.0 sq mm tinned braided copper wire.

20 All panels shall have provision of the following:

21 Pad locking of Switch board doors.

22 Pad locking of MCCB’s handles in “OFF” Position.

23 Additional set of C.T.s, potential free contacts, connectors, contactors with wiring etc are to be provided for BAS

including space required for various transducers in Main Switch Board sections. Only transducers shall be

supplied by BAS contractor.

All MCB’s used for protection of resistive and lightly inductive load shall be type “B” characteristic and inductive

(motor) load shall be of type “C” characteristic and discharge lamps and UPS etc. shall be of type D characteristic.

25 All incoming and outgoing air circuit breakers shall be placed on middle portion of the vertical in single tier

26 All PTs / control transformer shall be provided with centre tap earth secondary.

27 All DOL & Star-Delta Starters shall be provided with SPPR (single phase preventor relay) and 2 nos. of

Aux.Contacts for Remote operation/monitor.

Digitally signed by A

EXTERNAL DEVELOPMENT COLLEGE OF HORTICULTURE, MORENA

28 The Panel fabricator shall provide Al./ Copper Bus-bars link from Breakers wherever more than two nos. of cables

are terminated in the breakers.

29 Readymade 16 SWG Sheet steel Enclosure with cutout For MCBs

The breaking capacity of MCCB’s are mentioned panel wise. All MCCB’s shall be with thermal magnetic

releases upto 250 amps and miroprocessor based above 250 amps capacity, unless specified otherwise.

31 ACB shall comply with standards IS/IEC 60947-1 & 2

32 ACB shall have a rated operational voltage of 415V AC, rated insulation voltage of 1000 volts AC, rated impulse

voltage of 12kV.

33 ACB shall have a Ready to close mechanism preferably having a ready to close mechanical indication on front of

ACB. All EDO ACBs ready to close indication contact

34 ACBs upto 3200A shall be provided with top horizontal and bottom vertical terminal adapters on both sides for

proper cable connections/bus duct connections.

35 MCCB shall have a rated operational voltage (Ue) of 415V, insulation voltage (Ui) of 690 V (AC 50/60 Hz) &

impulse voltage (Uimp) of not less than 8kV.

36 MCCBs shall be current limiting type having a double break design

Protection Releases Microprocessor based (PRMB) & Thermal magnetic (PRTM) shall be as described below .

A Protection Release Microprocessor Based (PRMB-1) For ACB

Over-current/long time protection range 40% - 100 % with Time setting

short circuit /short time protection range 100% - 1000 % with Time setting

Instantaneous short circuit Protection range 150% - 1200 % with Time setting

Earth Fault Protection range 20% - 100 % with Time setting

ZSI(Zone Selectivity Interlocking)

B Protection Release Microprocessor Based (PRMB-3) For MCCB

Overload protection

short circuit protection

C Protection Release Thermal-Magnetic Based (PRTM) For MCCB

Design, fabrication, assembly, wiring and supply of front operated dead front cubicle type compartmentalised as

per Form 3B, rear access free standing, dust and vermin proof (IP 42 ingress protection) main switchboards

suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system suitable for a symmetrical fault level of 25 kA at 415

volts, fabricated from 2 mm thick CRCA MS sheets with hinged, gasketted (metal based neoprene) and lockable

doors having structural reinforcement with suitable angle/channel/T/flat sections including 3 mm thick gland plates

on top and bottom and including lifting hooks and including GI earth strip of required size with 2 nos earthing

terminals and including powder coated paint finish of approved shade over metal surface cleaned and treated with

seven tank process complete with interconnections etc as per specifications, as required and as below.

(Note:The contractor may select the next higher fault rating of MCCB if it is not readily available ,without any

extra cost ,as the figure indicated within the bracket are required maximum fault level of the panel).

NDSR-2.4 MAIN LT Panel

INCOMER FROM TRANSFORMER

From 1250 KVA Transformer-1

1 No. 2000A 4 pole microprocessor based EDO, ACB(50kA) with integral protection as per PRMB-1 mentioned in

Digitally signed by A

EXTERNAL DEVELOPMENT COLLEGE OF HORTICULTURE, MORENA

1 set of 2000/5A, 15 VA, class-1 CTs for APFC relay

1 set of R,Y,B phase indicating lamps each with 3 nos. 2A SP MCBs.

1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB

1 No. (0-2000A) Ammeter with ASS with 3 nos. 3200/5A CT's

1Set- of ON/OFF/Trip/ Spring Charged & Trip circuit healthy indicating lamps.

240 V AC Motor wound spring closing mechanism

1 - 24 volts DC shunt trip coil

6 nos NO/NC contacts for remote opening & closing

Terminals to receive XLPE insulated Aluminium cables

Class – B transient voltage surge suppression devices suitable for 3 phases as per specification.

Multifunction meter with display of V,I,PF,Energy,Power, Harmonics up to 15th order & %THD with RS485 port

From 1250 KVA Transformer-2

1 No. 2000A 4 pole microprocessor based EDO, ACB(50kA) with integral protection as per PRMB-1 mentioned in

1 set of 2000/5A, 15 VA, class-1 CTs for APFC relay

1 set of R,Y,B phase indicating lamps each with 3 nos. 2A SP MCBs.

1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB

1 No. (0-2000A) Ammeter with ASS with 3 nos. 3200/5A CT's

1Set- of ON/OFF/Trip/ Spring Charged & Trip circuit healthy indicating lamps.

240 V AC Motor wound spring closing mechanism

1 - 24 volts DC shunt trip coil

6 nos NO/NC contacts for remote opening & closing

Terminals to receive XLPE insulated Aluminium cables

Class – B transient voltage surge suppression devices suitable for 3 phases as per specification.

Multifunction meter with display of V,I,PF,Energy,Power, Harmonics up to 15th order & %THD with RS485 port

FROM 625 KVA DG INCOMER-01

1 Nos. 1000A 4 pole microprocessor based EDO, ACB(50kA) with integral protection as per PRMB-1 mentioned

1 set of R,Y,B phase indicating lamps each with 3 nos. 2A SP MCBs.

1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB

1 No. (0-1000A) Ammeter with ASS with 3 nos. 1000/5A CT's

1 Set- of ON/OFF/Trip/ Spring Charged & Trip circuit healthy indicating lamps.

240 V AC Motor wound spring closing mechanism

6 nos NO/NC contacts for remote opening & closing

Terminals to receive XLPE insulated Aluminium cables

Class – B transient voltage surge suppression devices suitable for 3 phases as per specification.

Multifunction meter with display of V,I,PF,Energy,Power, Harmonics up to 15th order & %THD with RS485 port

Electrolytic high conductivity Aluminium three phase and neutral busbars with earthing rated at 2000 amps having

a maximum current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 50 kA at 415

volts. The neutral busbar is to be of 50% capacity.

OUTGOINGS-Bus Section-1

1No.1250A TP+NL ACB (50 KA) complete with:

3 nos 1250/5A Class - 1.0, 15 VA Burden CT's for metering

ON / OFF indicating lamps with MCB as backup protection.

Digital Three Phase, four wire, multifunction Meter with V, A, KWH, 485 Communication Port, Class of

Accuracy-1 as specified.

Digitally signed by A

EXTERNAL DEVELOPMENT COLLEGE OF HORTICULTURE, MORENA

1No. 500A TP+NL MCCB(50KA) complete with:

3 nos 500/5A Class - 1.0, 15 VA Burden CT's for metering

ON / OFF indicating lamps with MCB as backup protection.

Digital Three Phase, four wire, multifunction Meter with V, A, KWH, 485 Communication Port, Class of

Accuracy-1 as specified.

2 No. 200A TP+NL MCCB(50KA) complete with:

3 nos 200/5A Class - 1.0, 15 VA Burden CT's for metering

ON / OFF indicating lamps with MCB as backup protection.

Digital Three Phase, four wire, multifunction Meter with V, A, KWH, 485 Communication Port, Class of

Accuracy-1 as specified.

1No. 150A TP+NL MCCB(50KA) complete with:

3 nos 150/5A Class - 1.0, 15 VA Burden CT's for metering

ON / OFF indicating lamps with MCB as backup protection.

Digital Three Phase, four wire, multifunction Meter with V, A, KWH, 485 Communication Port, Class of

Accuracy-1 as specified.

3No. 63A TP+NL MCCB(50KA) complete with:

3 nos 60/5A Class - 1.0, 15 VA Burden CT's for metering

ON / OFF indicating lamps with MCB as backup protection.

Digital Three Phase, four wire, multifunction Meter with V, A, KWH, 485 Communication Port, Class of

Accuracy-1 as specified.

BUS COUPLER - 1

i. 1 No. 2000Amps, 50KA, 415 volt 4-P EDO ACB without release complete with following:

a. 6 Nos. NO/NC contacts for remote opening & closing

b. Red/Green / Amber / ON/OFF / Trip indicating lamps with 2A SP MCB as backup protection.

c. Backup MCB and terminal blocks as required.

d. TNC Breaker Control switch

e. Required Interlocking with other incomers & Bus Coupler to be provided as per Interlocking / operation scheme.

FROM 625 KVA DG INCOMER-02

1 Nos. 1000A 4 pole microprocessor based EDO, ACB(50kA) with integral protection as per PRMB-1 mentioned

1 set of R,Y,B phase indicating lamps each with 3 nos. 2A SP MCBs.

1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB

1 No. (0-1000A) Ammeter with ASS with 3 nos. 1000/5A CT's

1 Set- of ON/OFF/Trip/ Spring Charged & Trip circuit healthy indicating lamps.

240 V AC Motor wound spring closing mechanism

6 nos NO/NC contacts for remote opening & closing

Terminals to receive XLPE insulated Aluminium cables

Class – B transient voltage surge suppression devices suitable for 3 phases as per specification.

Multifunction meter with display of V,I,PF,Energy,Power, Harmonics up to 15th order & %THD with RS485 port

Electrolytic high conductivity Aluminium three phase and neutral busbars with earthing rated at 2000 amps having

a maximum current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 50 kA at 415

volts. The neutral busbar is to be of 50% capacity.

OUTGOINGS-Bus Section-2

Digitally signed by A

EXTERNAL DEVELOPMENT COLLEGE OF HORTICULTURE, MORENA

1No.400A TP+NL ACB (50 KA) complete with:

3 nos 400/5A Class - 1.0, 15 VA Burden CT's for metering

ON / OFF indicating lamps with MCB as backup protection.

Digital Three Phase, four wire, multifunction Meter with V, A, KWH, 485 Communication Port, Class of

Accuracy-1 as specified.

1No.200A TP+NL MCCB(25KA) complete with:

3 nos 200/5A Class - 1.0, 15 VA Burden CT's for metering

ON / OFF indicating lamps with MCB as backup protection.

Digital Three Phase, four wire, multifunction Meter with V, A, KWH, 485 Communication Port, Class of

Accuracy-1 as specified.

1No. 150A TP+NL MCCB(25 KA) complete with:

3 nos 150/5A Class - 1.0, 15 VA Burden CT's for metering

ON / OFF indicating lamps with MCB as backup protection.

Digital Three Phase, four wire, multifunction Meter with V, A, KWH, 485 Communication Port, Class of

Accuracy-1 as specified.

2No. 100A TP+NL MCCB(25 KA) complete with:

3 nos 100/5A Class - 1.0, 15 VA Burden CT's for metering

ON / OFF indicating lamps with MCB as backup protection.

Digital Three Phase, four wire, multifunction Meter with V, A, KWH, 485 Communication Port, Class of

Accuracy-1 as specified.

2 No.80 TP+NL MCCB(25KA) complete with:

3 nos 80/5A Class - 1.0, 15 VA Burden CT's for metering

ON / OFF indicating lamps with MCB as backup protection.

Digital Three Phase, four wire, multifunction Meter with V, A, KWH, 485 Communication Port, Class of

Accuracy-1 as specified.

2 No.63 TP+NL MCCB(25KA) complete with:

3 nos 60/5A Class - 1.0, 15 VA Burden CT's for metering

ON / OFF indicating lamps with MCB as backup protection.

Digital Three Phase, four wire, multifunction Meter with V, A, KWH, 485 Communication Port, Class of

Accuracy-1 as specified.

BUS COUPLER - 2 For Raw Power Load

i. 1 No. 1000Amps, 50KA, 415 volt 4-P EDO ACB without release complete with following:

a. 6 Nos. NO/NC contacts for remote opening & closing

b. Red/Green / Amber / ON/OFF / Trip indicating lamps with 2A SP MCB as backup protection.

c. Backup MCB and terminal blocks as required.

d. TNC Breaker Control switch

e. Required Interlocking with other incomers & Bus Coupler to be provided as per Interlocking / operation scheme.

Electrolytic high conductivity Aluminium three phase and neutral busbars with earthing rated at 1250 amps having

a maximum current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 50 kA at 415

volts. The neutral busbar is to be of 50% capacity.

1No. 500A TP+NL MCCB(50KA) complete with:

3 nos 500/5A Class - 1.0, 15 VA Burden CT's for metering

ON / OFF indicating lamps with MCB as backup protection.

Digital Three Phase, four wire, multifunction Meter with V, A, KWH, 485 Communication Port, Class of

Accuracy-1 as specified.

Digitally signed by A

EXTERNAL DEVELOPMENT COLLEGE OF HORTICULTURE, MORENA

1 No. 200A TP+NL MCCB(50KA) complete with:

3 nos 200/5A Class - 1.0, 15 VA Burden CT's for metering

ON / OFF indicating lamps with MCB as backup protection.

Digital Three Phase, four wire, multifunction Meter with V, A, KWH, 485 Communication Port, Class of

Accuracy-1 as specified.

1No. 150A TP+NL MCCB(50KA) complete with:

3 nos 150/5A Class - 1.0, 15 VA Burden CT's for metering

ON / OFF indicating lamps with MCB as backup protection.

Digital Three Phase, four wire, multifunction Meter with V, A, KWH, 485 Communication Port, Class of

Accuracy-1 as specified.

1No. 63A TP+NL MCCB(50KA) complete with:

3 nos 60/5A Class - 1.0, 15 VA Burden CT's for metering

ON / OFF indicating lamps with MCB as backup protection.

Digital Three Phase, four wire, multifunction Meter with V, A, KWH, 485 Communication Port, Class of

Accuracy-1 as specified.

1No.400A TP+NL ACB (50 KA) complete with:

3 nos 400/5A Class - 1.0, 15 VA Burden CT's for metering

ON / OFF indicating lamps with MCB as backup protection.

Digital Three Phase, four wire, multifunction Meter with V, A, KWH, 485 Communication Port, Class of

Accuracy-1 as specified.

1No. 150A TP+NL MCCB(25 KA) complete with:

3 nos 150/5A Class - 1.0, 15 VA Burden CT's for metering

ON / OFF indicating lamps with MCB as backup protection.

Digital Three Phase, four wire, multifunction Meter with V, A, KWH, 485 Communication Port, Class of

Accuracy-1 as specified.

1No. 100A TP+NL MCCB(25 KA) complete with:

3 nos 100/5A Class - 1.0, 15 VA Burden CT's for metering

ON / OFF indicating lamps with MCB as backup protection.

Digital Three Phase, four wire, multifunction Meter with V, A, KWH, 485 Communication Port, Class of

Accuracy-1 as specified.

20% of Spare Psace need to be provied for future expension

PLC, UPS, Electrical interlocking are included in this cost

PLCFEEDER-FORAMFFORAUTOON/OFFTHEDG,LOADMANAGEMENT & E/M INTERLOCKING :

HardwareusingPLCsforMonitoringofallElectricalSoftwareandforoperations,controllingandinterlockingParametersof

2Nos.I/CfromTransformer&4Nos.DGSetwithWindowbasedsoftware&Engineering&SoftwareDevelopment.Require

dAux.Relays,PushButtons&Indicationlamps,1KVAUPSforBlackstart&maintenancefreeBatteries,Powermonitors,Pr

ogrammableLogiccontroller,AnnunciatorandstatusFascia,MIMICwithLEDcircuitetcasrequiredcompleting the

TheSwitchboardwithLogiccontrolpanelshallbecompletewithallinterconnections,risers,internalwiring,labels,control/c

ircuitfusesetc.complete as required.

Note:IncomerfromLTSupply,D.G.set&Buscouplershallbeelectrically & mechanically interlocked.

LT PANEL DESCRIVED ABOVE Set 1 4,401,996.73 4,401,996.73

NDSR-2.5 Capacitor Panel (425kVAR)

1 No 1250 A ACB

Digitally signed by A

EXTERNAL DEVELOPMENT COLLEGE OF HORTICULTURE, MORENA

1 Nos. 0 to 1250 Volt digital voltmeter with Voltmeter Selector Switch & Protective SP MCB (96mm square) (one

for each Incoming Breaker).

1 No. 0 to 1250Amp digital ammeter (96mm square) with CT's.

1 Sets of phase indicating lights (RYB) with protection fuses (one set for each incoming breaker).

1 Sets breaker 'ON' & 'OFF' indicating lamp (one set for each incoming breaker).

10 Step Automatic Power Factor Correction relay (APFC relay).

1600 Amp TPN busbars of aluminium alloy as per SLD.

2Nos.250 Amp TP MCCB.

2Nos. capacitor duty contactor (one for each 100 KVAR capacitor unit).

3 Nos.125 Amp TP MCCB.

3 Nos. capacitor duty contactor (one for each 50 KVAR capacitor unit).

2 Nos. 63 Amp TP MCCB.

2 Nos. capacitor duty contactor (one for each 25 KVAR capacitor unit).

2 Nos. 32 Amp TP MCCB.

2 Nos. capacitor duty contactor (one for each 10 KVAR capacitor unit).

1 Nos. 25 Amp TP MCCB.

1 Nos. capacitor duty contactor (one for each 5 KVAR capacitor unit).

10 sets of push button stations Red and Green for manual operation of capacitor units with auto/manual selector

1 No. Indicating lamp for each 100/50/25/10/5 KVAR capacitor unit to indicate that the unit is 'ON'.

1 No. Toggle switch for changing automatic to manual operation of capacitor units.

Power factor meter.

Capacitor Panel Described as above set 2 550,249.59 1,100,499.18

DSR2025 FIRE FIGHTING PANEL

Fabrication, supply, Insallation testing & commissioningof Electrical control panel of cubical construction, floormounted

type, fabricated out of 2mm thick CRCAsheet, compartmentalised with hinged lockable doors,dust and vermin proof,

powder coated of approvedshade after 7 tank treatment process, cable alley, interconnection with suitable size copper

conductor cable/solid copper strip, having switchgears andaccessories, mountings and internal wiring, earth terminals,

DSR-27.5 numbering etc. complete in all respect,suitable for main fire pump, pressurisation pump &diesel pump set complete as per

CPWD specification with following in coming and Outgoings, suitable foroperation on 415V, 3 phase, 50Hz Ac Supply

withenclosure protection class IP 42 as required :

250A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch

Digital Ammeter (0-250 A) with selector swtich & CTs

LED type RYB phase indicating lamps, ON, OFF, trip

indicating lamps

Set of Copper Bus Bar 300A

( Note : All outgoing feeders for pumps should have

digital Ammeter with selector switches, and LED type

Digitally signed by A

EXTERNAL DEVELOPMENT COLLEGE OF HORTICULTURE, MORENA

ON, OFF, trip indicating lamps)

125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload

protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for

automatic operation, selector switch for local/remote, auto/manual/OFF operation.

63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current

sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation,

selector switch for local/remote, auto/manual/OFF operation.

DIESEL ENGINE CONTROL

Control for diesel engine comprising -Automatic/Manual selctor switch & 3 attempts starting

device, timers and relays as required, push buttons, start/stop in manual mode

Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication

Battery charger suitbale for 12V/24 V DC with boost

and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter All standard relays and accessories for automatic

operation of diesel engine System Controller

Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire

pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers.

Sensors, annunciation window for fault indication, complete as per specification

27.5.1 FIRE FIGHTING PANEL DESCRIVED ABOVE set 1 256783 256,783.00

NDSR-2.8 PLUMBING PANEL

1 No. 200amps 4P MCCB(25KA) with thermal Magnetic release (PRTM) with Class-C transient voltage surge

suppression device suitable for 3 phases as per specifications.

1 No. 200amps ATS

METERING & INDICATION for each Incomer

1 set of R,Y,B phase indicating lamps

Multifunction digital meter (consisting of Voltage, Current, Frequency, PF, kWh, kVA, harmonics upto 15th order

& %THD) with RS-485 Port.

Sets of 200/5A, CL-1, 15VA CTs for measuring.

Sets of phase indicating lamp with 2A control MCBs.

250A TPN Aluminium Bus Bar with colour coded PVC Sleeves

3 No. 32amps 4P MCB, DOL starter

6 No. 20amps 4P MCB, DOL starter

PLUMBING PANEL DESCRIVED ABOVE set 1 198,089.85 198,089.85

NDSR-2.9 EXTERNAL LIGHTING PANEL

1 No. 63amps 4P MCCB(16KA) with thermal Magnetic release (PRTM) with Class-C transient voltage surge

suppression device suitable for 3 phases as per specifications.

1 No. 60amps ATS

METERING & INDICATION for each Incomer

1 set of R,Y,B phase indicating lamps

Multifunction digital meter (consisting of Voltage, Current, Frequency, PF, kWh, kVA, harmonics upto 15th order

& %THD) with RS-485 Port.

Sets of 60/5A, CL-1, 15VA CTs for measuring.

Sets of phase indicating lamp with 2A control MCBs.

100A TPN Aluminium Bus Bar with colour coded PVC Sleeves

8 No. 40amps 4P MCB

Digitally signed by A

EXTERNAL DEVELOPMENT COLLEGE OF HORTICULTURE, MORENA

EXTERNAL LIGHTING PANEL DESCRIVED ABOVE set 1 165,074.88 165,074.88

NDSR-2.10 METER BOARD PANEL (FOR TYPE-4 QUATERS)

1 No. 160A 4P MCCB (25 KA) as per PRMB-3 as mentioned in Preamble.

Metering &Indication:

1 set of R,Y,B phase indicating lamps

1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB

1 No. (0-100A) Ammeter with ASS with 3 nos. 100/5A CT's

1 Set of 200 A TPN Aluminium Bus Bar with colour coded PVC Sleeves

6 Nos. 63A FP MCB (10 KA) with energy meter for billing purpose

1 Nos. 40A DP MCB (10 KA)

Incomer for solar PV system as per site requirement (space only)

NDSR-2.11 METER BOARD PANEL (FOR TYPE-6 QUATER)

Supplying, Fabricated, Installation, Testing & commissioning of Metal clad LT cubical wall/Floor

mounted self supported totally enclosed compartmentalized separate compartment for each Meter

with 1 No. SPN MCB earth bus & studs as required having padlock and sealing arrangement for

each compartment, dust and vermin proof IP-42 protection made of 1.6 mm thick CRCA sheet steel

duly powder coated for indoor application having arrangement for incoming/outgoing cable termination,

earthing, insulated aluminium Bus Bar 3 phase 4 wire of suitable size in a separate chamber,

suitable for 415V 3 phase 50 Hz AC supply duly prewired with 10 sq.mm Copper wire, from in-comer

MCCB to bus bar and upto connectors mounted in an integrated loose wire box suitable for

following mountings and switchgear accessories. Cost includes 1 Nos. Three Phase energy meter in

incomer for Billing purpose

1 No. 63A 4P MCCB (25 KA) as per PRMB-3 as mentioned in

Metering & Indication:

i) 1 set of R,Y,B phase indicating lamps

ii) 1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP

iii) 1 No. (0-100A) Ammeter with ASS with 3 nos. 100/5A CT's

1 Set of 150 A TPN Aluminium Bus Bar with colour coded PVC Sleeves

i) 3 Nos. 63A FP MCB (10 KA)

ii) 3 Nos. 25A DP MCB (10 KA)

v) 2 no. 06 A SP, MCB (10 KA)

METER BOARD PANEL(FOR TYPE- 6 QUATERS) DESCRIBED AS ABOVE Set 1 165,074.88 165,074.88

SUB-HEAD - II - DG SET WORK

DSR2025-29.1.16 Supply, installation, Testing & Commissioning of 'Silent Type Diesel

Generating set as per CPCB IV + or better norms along with having Prime

Power Rating of KVA as below, 415 volts at 1500 RPM, 0.8 lagging power

factor at 415 V suitable for 50 Hz, 3 phase system & for 0.85 Load Factor,

including testing at factory and site with fuel, load for test and other

necessary arrangements Complete as per CPWD specifications, should

Digitally signed by A

EXTERNAL DEVELOPMENT COLLEGE OF HORTICULTURE, MORENA

have QR code which should contain drawing, test report OEM manual,Geo-

Tag of manufacturing location, rating plate as per relevant IS Code etc. and

consisting of the followings:

(A) Diesel Engine:

Turbocharged Diesel engine 4 stroke water cooled, multi cylinder,

dynamically balanced fly wheel, electric start of suitable BHP at 1500 RPM

suitable for above output of alternator at 40 Degree C, 50% RH & at 1000

Meter MSL , capable of taking 10% over loading for one hour after 12 hours of

continuous operation. The engine will be with Electronic governor, Dry type

Air filter with service indicator, first filling of engine fuel (after commissioning)

lubricating Oil, Coolant and other consumables complete with all the

required accessories, the Electronic governor shall be as per ISO 8528.The

engine shall comply to the latest CPCB norms (CPCB IV + or better) and

Conforming to BS 5514, BS 649, IS 10000, IS 10002, IS 13018 and as per

CPWD specifications.

(B) Engine mounted Instrument Panel fitted with and having digital display

(i) Start-stop switch with key

(ii) Water temperature indication

(iii) Lubrication oil pressure indication

(iv) Lubrication oil temperature indication

(v) Battery charging indication and Voltage indication

(vi) RPM indication

(vii) Over speed indication

(viii) Low lubricantion Oil trip indication

(ix) Engine Running Hours indication

(C) Alternator:

Synchronous alternator rated of appropriate KVA, 415 volts at 1500 RPM, 3

phase 50 Hz, AC supply with 0.8 lagging power factor at 40 Degree C, 50%

RH & at 1000 Meter MSL. The alternator shall be having Screen Protected

Drip Proof (SPDP) enclosure IP23, brushless, continuous duty, dynamically

balanced rotor, capable of taking 10% over loading for one hour after 12

hours of continuous operation, self cooled,self-excited and self-regulated

through AVR conforming to IS13364(Part 2)/IS: 4722/BS 2613 suitable for

tropical conditions and with class- H insulation.

(D) Base Frame & Foundation:

Both the engine and alternator shall be mounted on suitable base frame

made of MS channel with necessary reinforcement which shall be installed

on suitable cement concrete foundation and vibration isolation arrangement

as per recommendations of manufacturer.

Daily service fuel tank of suitable liters capacity as per CPWD Specifications,

fabricated out of 3 mm thick M.S. sheet complete with all standard

accessories and fuel piping between fuel tank and diesel engine with MS

class 'C' pipes of suitable dia. Complete with valves, level indications &

accessories as required as per specifications.

(F) Exhaust System:

Dry exhaust manifold with hospital type exhaust silencer and catalytic

(G) Starting System:

12V/24V DC starting system comprising of starter motors: voltage

regulator and arrangement for initial excitation complete with suitable

numbers of batteries (180 AH capacity lead acid SMF type) as required as

per specifications. The battery shall be housed inside the acoustic enclosure

(H) Acoustic and weather proof enclosure with arrangement for fresh air

Digitally signed by A

EXTERNAL DEVELOPMENT COLLEGE OF HORTICULTURE, MORENA

intake for cooling of the engine & alternator, extraction, discharging hot air in

to the atmosphere and the temperature rise inside the enclosure, noise level

outside enclosure. The acoustic enclosure should be suitable for cable

connection/connection through bus-trunking. Such arrangements on

acoustic enclosure should be water proof & dust-proof conforming to IP-65

protection. The enclosure shall be as per CPCB IV + or better norms etc. and

as per CPWD specifications.

Free standing floor mounted IP 42 automatic mains failure control panel

including auto by-pass, suitable for KVA as below for silent type DG set

complete with relays, timers, set of CTs for metering & protection and energy

analyser to indicate currents, phase and line voltages, frequency, power

factor, KWH, Kilo Volt Ampere Reative Hour (KVARH), KVA (Phase & Total),

KW & provision for overload, short circuit, restricted earth fault, under

frequency, power (aluminum) and control (copper ) cabling of suitable size

upto 15 meter between AMF panel, LT Panel and DG Set including

connection interconnection etc. as required, all complete and inter locking

and communication/ Ethernet /RS485/SNMP port open protocol for BMS

integration including suitable software, the panel shall be of DG Set OEM

make etc. as per approved by Engineering in charge and including the

1. Suitable numbers and appropriate capacity 4 pole motorised

electrically operated draw out with cradle type 3 position ACB/ MCCB

with electronic release for O/C & E/F and shunt trip.

2. Auto/Manual/Test/Off selector switch

3. Protection for under and over voltage phase reversal (2 nos Over

voltage relay, 2 Nos. reverse power relay and 2 Nos. under voltage

4. 3 Sets of current transformers 15 P 10 accuracy for protection and 15

VA class-I for metering

5. Energy analyser unit to indicate current, Voltage( L-N & L-L), kW, kVA

(Phase & Total), Frequency, KWH, PF.

6. LED Indicating lamps for load on mains and load on set.

7. Fuse/ MCB for instruments.

8. Battery charger, complete with transformer/ rectifier, D.C. voltmeter

and ammeter, selector switch for trickle, off and boost and current

9. Main supply failure monitor.

10. Supply failure timer.

11. Restoration timer

12. Control unit with three impulse automatic engine start/stop and failure

to start lockout.

13. Impulse counter with locking and reset facility.

14. ON/OFF/Control circuit switch with indicator

15. Audio/Video annunciation for

(i) High water temperature

(ii) Low lubricating oil pressure

(iii) Engine over speed

(iv) Engine fails to start

(v) Full load/maximum load warning

16. Protection for over/under Frequency, Loss of AC sensing, Over

Current, Unbalancing load with suitable number of relays and

17. Maintenance notification based on Engine Run Hour & due date.

18. Load Management through PLC to achieve auto opening and closing of

incomer breakers, bus coupler switching of essential panel ,

interlocking providing signal to AMF Panel for load status and AMF

Digitally signed by A

EXTERNAL DEVELOPMENT COLLEGE OF HORTICULTURE, MORENA

shall give command to DG Set to auto start / auto stop depending upon

load status and requirement etc. and necessary hardware and

software required to perform the operation shall be provided by the

contractor including all control wiring.

DSR 29.1.16 625KVA DG Set Equipment With AMF Panel

NDSR-3.1 Supplying and fixing Exhaust gas piping of 1x200 dia. welded black MS, B Class pipe conforming to IS:3589 cut

to 23m lengths and installed with necessary bends, supports and clamps, anti-vibration mountings, insulation of

exhaust system with mineral wool/Rockwool, 50 mm thick wire mesh & aluminum cladding etc., as required as

per specifications.

Total of Sub-Head - IIcarried to summary sheet 10077528 129125

SUB HEAD- III : EARTHING

1.0 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure Set

5.2 with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. 15 7658 114,870.00

2.0 5.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry Set 11

enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ 8351 91,861.00

coke and salt as required.

3.0 5.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry Set 10

enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ 15004 150,040.00

coke and salt as required.

4.0 5.7 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including Metre 300

connection/ termination with GI thimble etc. as required.

5.0 5.10 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe FRLSom earth electrode including Metre 450

connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

6.0 5.11 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection Metre 450

with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

7.0 5.12 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from Metre 300

earth electrode including connection with G.I. thimble excavation and re-filling as required.

8.0 5.14 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. Metre 250

9.0 5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. Metre 150 287 43,050.00

10.0 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. Metre 130 84 10,920.00

Total of Sub-Head - III carried to summary sheet 1,911,591.00 0

SUB HEAD-IV: CABLE & END TERMINATIONS

2.0 10.5 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in

the existing RCC/ HUME/ METAL pipe as required.

b 10.5.2 Above 35 sq. mm and upto 95 sq. mm Metre 80 72 5,760.00

c 10.5.3 Above 95 sq. mm and upto 185 sq. mm Metre 150 97 14,550.00

d 10.5.4 Above 185 sq. mm and upto 400 sq. mm Metre 800 170 136,000.00

3.0 10.6 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in

the existing masonry open duct as required.

b 10.6.2 Above 35 sq. mm and upto 95 sq. mm Metre 100 58 5,800.00

c 10.6.3 Above 95 sq. mm and upto 185 sq. mm Metre 100 80 8,000.00

Digitally signed by A

EXTERNAL DEVELOPMENT COLLEGE OF HORTICULTURE, MORENA

d 10.6.4 Above 185 sq. mm and upto 400 sq. mm Metre 250 146 36,500.00

4.0 10.8 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of

following size on cable tray as required.

a 10.8.1 Upto 35 sq. mm (clamped with 1mm thick saddle) Metre 1500 53 79,500.00

b 10.8.2 Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) Metre 100 109 10,900.00

c 10.8.3 Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp) Metre 50 138 6,900.00

d 10.8.4 Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp) Metre 50 226 11,300.00

e 10.10 Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, Each 100

bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required. 598 59,800.00

6.0 22.4 Laying of one number XLPE power cable of 11 KV grade of following size in the existing masonry open duct as

a 22.4.2 Above 120 sq. mm and upto 400 sq. mm Metre 150 146 21,900.00

7.0 11.1 Supplying and making end termination with brass compression gland and aluminium lugs for following size of

PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

11.0 NDSR-4(C) Supply of MV cable

Supply, following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor/copper conductor power/

multicore control armoured cable of 1.1 KV grade.

a NDSR-4.1 3.5C X 300 Sqmm Aluminium Cable Metre 400 2378 951274.261

b NDSR-4.2 3.5C X 240 Sqmm Aluminium Cable Metre 400 1941 776301.8126

c NDSR-4.3 3.5C X 185 Sqmm Aluminium Cable Metre 200 1539 307862.9157

d NDSR-4.4 3.5C X 150 Sqmm Aluminium Cable Metre 250 1236 309039.55

e NDSR-4.5 3.5C X 120 Sqmm Aluminium Cable Metre 100 1042 104235.9602

f NDSR-4.6 3.5C X 95 Sqmm Aluminium Cable Metre 250 836 209025.6307

g NDSR-4.7 3.5C X 70 Sqmm Aluminium Cable Metre 150 671 100706.0572

h NDSR-4.8 3.5C X 50 Sqmm Aluminium Cable Metre 150 496 74335.60509

i NDSR-4.9 3.5C X 35 Sqmm Aluminium Cable Metre 250 385 96207.16115

j NDSR-4.10 4C X 25 Sqmm Aluminium Cable Metre 150 335 50249.20791

k NDSR-4.11 4C X 16 Sqmm Aluminium Cable Metre 350 253 88662.85859

l NDSR-4.12 4C X 10 Sqmm Aluminium Cable Metre 300 223 66860.51631

m NDSR-4.13 4C X 6 Sqmm Aluminium Cable Metre 120 176 21096.36167

n NDSR-4.14 3C X 10 Sqmm Aluminium Cable Metre 200 197 39313.42988

o NDSR-4.15 3C X 6 Sqmm Aluminium Cable Metre 50 156 7821.157705

p NDSR-4.16 2C X10Sqmm Aluminium Cable Metre 50 154 7682.730135

Digitally signed by A

EXTERNAL DEVELOPMENT COLLEGE OF HORTICULTURE, MORENA

Total of Sub-Head - IVcarried to summary sheet 519822 3211738

SUB HEAD-V : EXTERNAL LIGHTING

1) Supply of following sizes XLPE insulated (Heavy duty) Aluminium or Copper conductor armoured cables suitable

for working voltage upto and including 1100 Volts complete as required and as per specifications.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in

the existing RCC/ HUME/ METAL pipe as required.

4) Termination of the following sizes of XLPE insulated Aluminium/ Copper conductor cable including providing

terminal lugs,double compression gland , crimping the joints ,providing insulation tape,effecting terminal

connections to the equipment complete as required.

a NDSR-5.2 2 x 6 sq,mm, Al conductor cable Nos. 50 719.82 35,991.17

5) Supply, laying and termination of the following sizes of 650/1100 volts grade PVC insulated copper conductor

wires in existing conduits including end terminations with copper lugs.

a. 1.17.12 3 x 2.5 sq.mm. Copper conductor ,PVC insulated PVC sheathed wires RM 250 148 37,000.00

b. 2 X 6 sq. mm PVC insulated copper conductor wire along with 1 X 2.5sq.mm PVC insulated copper conductor wire RM 100

a. 15.15.1 63 mm dia (OD-63 mm and ID-51 mm nominal) HDPE pipe RM 300 136 40,800.00

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars,

7 jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as

9) NDSR-5.4A Supply, erection, testing and commissioning of 4 M high Tubular pole as per Technical specifications and with

following components :-

Including supply and installation of 6 ways-20A connector & 6A MCB mounted on 6mm thick painted M.S/GI

plate, insulated, and fixed inside the pole suitable for termination of armoured aluminium cable as required and

wiring to Luminaries from the 6A MCB, with 3x2.5 sq.mm. PVC insulated copper, stranded conductor (P+N+PE)

double sheathed wire including terminations.

4 meters high tubular pole with single arm of length 1 meter, smoothly curved making an angle of 10 deg to 15 Nos. 20

deg with the horizontal plane complete as required.

9) NDSR-5.4B Supply, erection, testing and commissioning of 6 M high Tubular pole as per Technical specifications and with

following components :-

Including supply and installation of 6 ways-20A connector & 6A MCB mounted on 6mm thick painted M.S/GI

plate, insulated, and fixed inside the pole suitable for termination of armoured aluminium cable as required and

wiring to Luminaries from the 6A MCB, with 3x2.5 sq.mm. PVC insulated copper, stranded conductor (P+N+PE)

double sheathed wire including terminations.

6 meters high tubular pole with single arm of length 1.5 meter, smoothly curved making an angle of 10 deg to 15 Nos. 25

deg with the horizontal plane complete as required.

10) NDSR-5.5A Supply,Receiving and fixing in position, effecting proper connections, testing and commissioning of 40W Nos 20

Luminaire on existing 4 Mtr pole as per specifications,complete in all repects including nipple for fixing of Light 5,612.55 112,250.92

fixture on pole.

10) NDSR-5.5B Supply,Receiving and fixing in position, effecting proper connections, testing and commissioning of 90W 25

Luminaire on existing 9 Mtr pole as per specifications,complete in all repects including nipple for fixing of Light Nos 6,859.78 171,494.46

fixture on pole.

NDSR-5.6 Supply, installation, testing & commissioning of 300W FLOOD Light Nos 10 9,977.86 99,778.59

11) NDSR-5.7 Supply,Receiving and fixing in position, effecting proper connections, testing and commissioning of 9W LED 30

12) NDSR-5.8 Supply,Receiving and fixing in position, effecting proper connections, testing and commissioning of 35 W GATE 4

Digitally signed by A

EXTERNAL DEVELOPMENT COLLEGE OF HORTICULTURE, MORENA

14) NDSR-5.19 Supply, installation Testing including civil foundation work & commissioning of fixed type high mast lighting

tower (16 mtr.) with 8 Nos. 300 watt LED flood light fittings for outdoor lighting application with manual rope Nos. 5 205,793.35 1,028,966.73

arrengment and panel.

DSR2025-8.21 Solar outdoor LED light

DSR2025-8.21.2 Supplying, installation, Testing & Commissioning of the integrated type solar

PV lighting system on the existing pole structure, comprising of 30 watt, 6V

Mono Passivated Emitter and Rear Contact (PERC) Solar Panel (minimum

efficiency 21%), Pulse with modulation (PWM)/Maximum Power point

tracking (MPPT) charge Controller in the box with a sleek appearance and a

sturdy structure, is weather-proof, and is simple to install, With Lithium- Iron

Phosphate Battery (LiFePO4) 3.2Volt (Cell) 30 AH battery, charging time 8-

10 hours, Battery backup time 12 hours (minimum), LED fixture watt 30 watt,

Input voltage: 12V DC , Operating temp range -15 deg to 50 deg

centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5,

Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP-

66,IK-08, CRI >80 , under voltage and over voltage protection, Electro

Magnetic Interference (EMI) Electro Magnetic Compatibility (EMC) As per

CISPER 15 A, lenses for beam angle as per Illuminating Engineering

Society of North America (IESNA) type I/II/III as per the width of the road and

the project requirement, Correlated Colour Temperature (CCT) 5700°K

/6000°K (As per American National Standard Institute (ANSI Bin)) , life time

(LED,Driver & electrical circuitry) of 50K hours lamp burring hours till the 70

% of initial Lumen maintained as per LM80 extrapolation IES TM-21-11

report, automatic switch on/off, Alliuminium or Acrylonitrile Butadiene

Styrene (ABS body), can be installed on a pole or wall. System lumen

efficacy >120 lm/Watt output All as per pre approved by Engineer in-charge

complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated

copper conductor single core cable and earthing etc. as required.

(Part 1), for fixtures up to 60 watt. LED light Complete with mounting

structure for the battery and accessories and wind storm withstand capacity

as per the zone. (Thermal management: heat sink of aluminium housing

such that LED junction temperature do'nt rise aboven 90°C)

30 Watt (System lumen efficacy >120 lm/Watt) set 16 23100 369,600.00

Total of Sub-Head - V carried to summary sheet Rs 1,513,300.00 2,627,327.59

Digitally signed by A

COLLEGE OF HORTICULTURE AT MORENA (M.P.)

Name of Project: Comprehensive External Infrastructure Development including Type-IV & Type-VI Residential Units, Main Entrance

Gate, Boundary Wall, Underground Water Tank, Sewage Treatment Plant and other miscellaneous works at Morena (M.P.), under

Detailed estimate of Internal & External Plumbing Services

S. No. Description

Amount (in Rs.)

1 SANITARY FIXTURES & FITTINGS ₹ 6,91,580.05 ₹ 11,40,595.00

2 INTERNAL & EXTERNAL WATER SUPPLY ₹ 11,37,414.51 ₹ 3,94,962.50

3 SOIL, WASTE, VENT PIPES, RAIN WATER PIPES & FITTINGS. ₹ 16,006.02 ₹ 7,33,353.96

4 EXTERNAL SEWERAGE AND STORM WATER DRAINAGE ₹ 33,89,474.95 445230.5

5 EXTERNAL WATER SUPPLY ₹ 3,81,224.56 ₹ 29,100.00

6 RAIN WATER HARVESTING PIT (4 Nos.) ₹ 13,20,399.20

7 STP (ELECTROMECHANICAL ONLY) ₹ 43,21,750.00

Add: Impact of Multiplying factor on DSR 2023 ₹ 67,48,824.62

GRAND TOTAL (DSR +NSR) ₹ 150,83,816.58

GRAND TOTAL (DSR +NSR) ₹ 150,83,816.58

Digitally signed by ARTI

COLLEGE OF HORTICULTURE AT MORENA (M.P.)

Name of Project: Comprehensive External Infrastructure Development including Type-IV & Type-VI Residential Units, Main Entrance Gate, Boundary Wall, Underground

Water Tank, Sewage Treatment Plant and other miscellaneous works at Morena (M.P.), under RLBCA

Schedule Of Quantity Internal & External Plumbing Services

MR Rate MR Amount

DSR 2023 Description Unit QTY DSR Rate (in Rs.) DSR Amount (in Rs.)

SANITARY FIXTURES & FITTINGS

Providing and fixing white vitreous china extended

wall mounting water closet of size

780x370x690mm of approved shape including

providing and fixing white vitreous china cistern

with dual flushing fitting,of flushing capacity 3

litre/6 litre( adjustable to 4 litre/8 litres),including

seat cover and cistern fittings,nuts,bolts and

gasket etc. complete.

Providing and fixing wash basin with C.I. brackets,

15 mm dia CP Brass single hole basin mixer of

17.7A approved quality and make, including painting of

fittings and brackets, cutting and making good the

walls wherever required:-

a) White Vitreous China Wash basin size 630x450

mm with a 15 mm CP Brass single hole basin mixer

Digitally signed by ARTI

MR Rate MR Amount

DSR 2023 Description Unit QTY DSR Rate (in Rs.) DSR Amount (in Rs.)

Providing and fixing kitchen sink with C.I. brackets,

C.P. brass chain with rubber plug, 40 mm C.P. brass

waste complete, including painting the fittings and

brackets, cutting and making good the walls

wherever required:

White glazed fire clay kitchen sink of size

Supply, Receiving, Storing & Fixing of CP brass

wall mounted sink mixer with C.P. wall flange,

MR-1 swinging spout complete as required with flow Each 11 ₹ 5,075.00 ₹ 55,825.00

rate of 6.0 LPM complying to Green Building

Providing and fixing 8 mm dia C.P. / S.S. Jet with

flexible tube upto 1 metre long with S.S. triangular

17.16A plate to Eureopean type W.C. of quality and make Each 20 ₹ 349.15 ₹ 6,983.00

as approved by Engineer - in - charge.

Providing and fixing CP Brass 32mm size bottle

17.22A trap of approved quality & make and as per the Each 28 ₹ 1,034.80 ₹ 28,974.40

direction of engineer in charge.

Providing and fixing C.P. brass long nose bib cock

18.50 of approved quality conforming to IS standards

and weighing not less than 810 gms

Digitally signed by ARTI

MR Rate MR Amount

DSR 2023 Description Unit QTY DSR Rate (in Rs.) DSR Amount (in Rs.)

17.34 Providing and fixing toilet paper holder

Supply, Receiving, Storing & Fixing of C.P. brass

MR-2 twin coat hook with PVC rawl plug & C.P. brass Each 28 ₹ 734.00 ₹ 20,552.00

screw complete as required. Make :

Providing and fixing C.P. brass angle valve for

basin mixer and geyser points of approved quality

conforming to IS:8931.

Providing and fixing unplasticised P.V.C.

connection pipe with PTMT Nuts, collar and bush

of approved quality and colour.

18.74.2 15 mm nominal bore with 45 cm length Each 148 ₹ 121.90 ₹ 18,041.20

Providing and fixing Chromium Plated towel ring

Rectangular shape with concealed fittings

MR-3 arrangement of approved quality and colour, of Each 28 ₹ 1,598.00 ₹ 44,744.00

approved brand & manufacture complete as per

direction of Engineer in Charge.

Providing and fixing of C. P. brass towel rail 600 x