AS-16-161 (Balance Work) Chamuakhat to Panbari Habi Road

Amount

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. (i) Private Land

Construction of granular sub-base (A) By Mix in Place Method, Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (II) For Grading Material (Gr-II)

Traffuc- Signs B. Semi reflectivf Traffic Signs 1) Providing & fixing retro – reflectorised cautionary, mandatory and informatory sign as per IRC:67 made encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and technical specification Clause 801 (i) 90cm equilaterial triangle

Traffuc- Signs B. Semi reflectivf Traffic Signs 1) Providing & fixing retro – reflectorised cautionary, mandatory and informatory sign as per IRC:67 made encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and technical specification Clause 801 ii) 60cm Circular

Traffuc- Signs B. Semi reflectivf Traffic Signs 1) Providing & fixing retro – reflectorised cautionary, mandatory and informatory sign as per IRC:67 made encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and technical specification Clause 801 iv) 80x 60 cm rectangular

Kilometer Stone Reinforced cement concrete M 15 grade kilometer stone / local stone of standard design as per IRC: fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703. II) Ordinary Kilometre stone (Precast)

Kilometer Stone Reinforced cement concrete M 15 grade kilometer stone / local stone of standard design as per IRC: fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703. (iii) 200m stone ( precast)

Providing and laying interlocking concrete block pavement(M30) having thickness 80mm as per technical specification clause 1504 ( inclusive Edge Block / Edge restraints and carriiage and including 12% GST, 1% LC and 0.5% Swatch Bharat Cess)

RCC Box Culvert Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202.

Removing all type of Hume Pipe and stacking within a lead of 1000m including earth work and dismantling of masonry works as per technical specification clause 202. Above 900mm dia Hume pipe

Plain/Reinforced cement concrete, in sub structure complete as per drawing and technical specification Clause 802, 804, 805, 806, 807, 1202 and 1204 (A) With Crushed Stone, RCC Grade M-25 (i) For Height up to 5m

Providing concrete for plain / reinforced concrete in open foundation complete as per drawing and technical specification clause 802, 803, 1202 & 1203, PCC Grade M-15, Nominal Mix 1:2.5:5

Supplying fitting and placing TMT ( fe -500 D) reinforcement bar ( from Primary producer TATA/ SAIL/Esser Steel / Jindal Steel/Sahyam Steel / RINL) in sub-structure complete as per drawing and technical specification Clause 1002, 1005, 1010 & 1202.

Providing and laying cement concrete wearing course M 30 grade including reinforcement complete as per drawing and technical specifications Clauses 800 and 1206.3

Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000 mm, as per drawing and technical specification clause 800, 900 and 1208.3

Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Table 1300.1 no fragment weighing less than 25 Kg laid dry complete as per drawing and technical specification clause 1301

Routine Maintenance for the 1st Year

Routine Maintenance for the 2nd Year

Routine Maintenance for the 3rd Year

Routine Maintenance for the 4th Year

Routine Maintenance for the 5th Year