CONSTRUCTION OF LAB UNDER PM SHRI AT KV AFS YELAHANKA

Amount

Demolition of PCC of any description and in any position complete all as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil all as specified and directed.

All as item No 3 above but depth above 1.5m but not exceeding 3m and getteing out in soft / loose soil all as specified and directed.

M&L for PCC type D-2,1:4:8 (using 40mm graded stone aggregate) in foundation, filling & mass concrete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter and concrete surface finished rough and flat complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns, and stanchions and finished rough surfaces of concrete flat all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc and finished rough surfaces of concrete flat all as specified and directed.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) all as specified and directed.

Formwork to chullah hoods, chajjas, troughs and similar items including edges all as specified and directed.

M&L for reinforced cement concrete M-25 design mix (using 20mm graded stone aggregate) for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc., basement slabs, under reamed piles and mass concrete all as specified and directed.

M&L for Reinforced cement concrete M-25 design mix (using 20mm graded stone aggregate) in Columns, pillars, piers, posts and struts all as specified and directed.

M&L for Reinforced cement concrete M-25 design mix (using 20mm graded stone aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for Reinforced cement concrete M-25 design mix (using 20mm graded stone aggregate) in chajjas all as specified and directed.

M&L for Reinforced cement concrete M-25 design mix (using 20mm graded stone aggregate) in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing all as specified and directed.

M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders all as specified and directed.

M&L for PCC block masonry with solid blocks of grade C (5 N/mm2) as per IS:2185(Part-I) 2005 exc.10cm in width and setting in CM 1:4, complete all as specified and directed.

M&L for Hardcore, broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:4:8, type D2 (using 40 mm graded stone aggregate) as sub base of floor complete all as specified and directed.

M&L for 22mm thick plain cement concrete type B0, 1:2:4 (using 12.5mm graded stone aggregate) in flooring surface to be finished even, complete all as specified and directed.

M&L for 75mm thick plain cement concrete type A1, 1:11/2:3 (using 20mm graded stone aggregate) as in steps and ramp finish cement concrete surface even complete all as specified and directed.

M&L 75 mm thick plain cement concrete type C-1,1:3:6 (using 20mm graded stone aggregate) for plinth protection and surface is to be finished even & smooth, complete all as specified and directed.

M&L for Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B thickness of slab upto 100mm.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in any kind of soil all as specified and directed.

Filling only earth under floor or in foundation including watering and consolidation all as specified and directed. Note: For payment purpose consolidated thickness will be considered for measurement.

Removing excavated soil material n. exc 50 m and depositing where directed.

M&L for double charged Vitrified Ceramic tiles light shade,10mm thick(square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm but n.exc 1.00 Sqm, in floors etc.laid with spacer and joints grouted with epoxy filling material set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for double charged Vitrified Ceramic tiles light shade,10mm thick(square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm but n.exc 1.00 Sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for double charged Vitrified Ceramic tiles light shade, exterior grade,10mm thick(square/ rectangular) polished, area of each tiles exceeding 0.36Sqm but n.exc 0.42 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

S&F of UPVC (Unplastisized Poly-Vinyl Chloride) sliding windows multichambered and stiffened / reinforced framed windows using 112 mm x 52 mm x 2.3mm (±0.2mm) size sections alround as main frames and shutters made with the profile sections of size 68 mm x 42 mm, including the cost and fixing of 5 mm thick clear float glass in shutters and SS Mesh in mesh Shutters of Size 60 mm x 35 mm with neccessary beading, the corners of all the profiles of frames and shutters shall be homogeneously fusion heat welded without any gaps. The shutters shall have necessary handles, beadings and other associated fittings to facilitate smooth operation. Both the Frame and the Shutters shall be Reinforced with GI Profiles of thickness 1.25mm. Fixing the window unit to the existing masonry with anchor fasteners as required. The gaps between the window frames and masonry walls shall be filled with silicon(Dowsil) or with any other suitable filler materials by the installation team at site complete all as specified and directed.

S&F factory made WPC door frame 100% Solid (wood polymer composite) Size 100mm x 65 mm Single Rebated ,made from wpc material comparising of virign PVC polymer of K value 58-60 (suspension grade ) calcium corbonate and natural fibers ( wood powder/rice husk /wheat husk) minimum compressive strength of 58 N/mm2, moduus of elasticity 900N/mm2 and resistance to spread of flame of class 'A' category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in postion with SS dash fasterns / hold fast of required dia and length,colour of door frame to match that of shutter complete all as specified and directed. MAKE:- BLACK COBRA/SMP Impex or Equivalent.

S & F mild steel work holdfast, cleat etc. for door frame etc. conforming to Fe-290 (Gde E-165) all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. MAKE:- BLACK COBRA/ SMP Impex or Equivalent. Note: Stainless steel butt hinges and necessary S.S screws shall be paid separately.

S&F aluminium alloy anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheets, cast or extracted section and fixing bolt and sliding bolts of extruded section all as specified and directed.

S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type C-21 all as specified and directed.

S&F for aluminium anodised, barrel tower bolt 150mm of extruded section all as specified and directed.

S&F for aluminium handle 150mm cast type anodised all as specified and directed.

S&F mild steel Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165. complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St-240, all as specified and directed.

S&F CPVC pipes 20 mm SDR 11 & Plain VPVC SDR 11 on walls, ceiling or laying in floors including fitting all as specified and directed.

S&F CPVC pipes 25 mm SDR 11 & Plain VPVC SDR 11 on walls, ceiling or laying in floors including fitting all as specified and directed.

S&F 25 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (Minimum weight 25mm-455gms) all as specified and directed.

S&F PTMT Nipple 25 mm suitable for HDPE water tank. (Minimum weight 25mm- 65gms) all as specified and directed.

S&F PTMT Nipple 20 mm suitable for HDPE water tank. (Minimum weight 20mm- 45gms) all as specified and directed.

S&F rotational moulded polyethylene water storage tank 500 ltr capacity including threaded type cover hoisted and fixed in position all as specified in SSR Pt - I.

S&F 15mm dia sink cock fancy type table mounted with swivel spout fixed with wall flanges complete all as specified and directed. Make: Jaguar/Cera/Ess Ess

S&F of 32/40mm PVC waste pipe for sink all as specified and directed.

S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm® all as specified and directed.

M&L for plain cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in copings, apex stones, kerbs including weathring slightly rounded or chamfered angles and throating all as specified and directed.

M&L Preparing of new steel surface over 10cm in width or girth and applying two coats of Synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L 15mm thick cement plaster in CM 1:4 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on external wall complete all as specified and directed.

M&L for Preparation of the new plastered surfaces of walls and applying two coats of weather proof paint (Apex), complete all as specified and directed.

M&L 15mm thick cement plaster in CM 1:6 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on internal walls complete all as specified and directed.

M&L for Preparing the new surfaces of wall and applying two coat of oil bond distemper over a coat of primer complete all as specified and directed.

M&L for 5 mm thick rendering on concrete surfaces in cement mortar (1:3) all as specified and directed.

M&L for preparation of newly plastered ceiling surface and applying three coat of White wash all as specified and directed.

S&F for aluminium powder coated drapery rod 25mm dia fixed with suitable bracket complete all as specified and directed. Note: Bracket will be measured and paid separately.

S&F aluminium powder coated fancy type suitabe brackets fixed at both ends of openings fixed over 1st class hard wood rounded wooden blocks of 65mm dia and 20mm thick fixed to stone wall/Brick wall using screws including necesary drilling & finished with polishing each opening shall have two fillets at both ends complete all as specified and directed.

M&L for 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs pillar window cill, cooking plat forms and including 20mm thick cement mortar (1:4) including pointing in white cement (tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone (i) using morble dust with admiture of pigment to match including Rounding to edges of granite slab such as cooking platform all as specified and directed.

M&L for Factory made WPC Single extruded board of 18mm thick pre laminated shutter for kitchen cabinets, Cupboard. The pre laminated side with different density and other side plain with of density not less than 600kg/ cum. the 18mm board should be 100% lead free water proof, termite proof and borer proof and should have good screw holding capacity complete including Necessary fittings like Hinges, handle and hanging rod and locking arrenement etc all as specified and directed. Make :Sintex/ Black cobra/ SMP Impex.

M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface all as specified and directed.

M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area all as specified and directed.

S&F PVC(SWR) Pipe 110mm dia single soketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and directed.

S&F PVC (SWR) bends 110 mm dia in any radius with access door etc.all as specified and directed.

M&L for rendering 15mm thick (average) in cement mortar 1:4 on roof surfaces mixed with water proofing compound as per manufacturer's instructions, finished even and smooth without using extra cement complete all as specified and directed. Note:- Supply only of water proofing compound will be measured and paid seperately under relevant item.

Supply only approved integral water proofing compound all as specified and directed. Make : conplast x 421 IC of M/s Fosroc Chemical (Inida) Ltd or its equivalent of make Dr Fixit/ STP Ltd.

M&L for Roof treatment for in-accessible roof as per following procedure and specification: - (i) Preparation of surfaces by removing all dust, loose particles of RCC slab. (ii) Apply polyurethane waterproofing coating on prepared concrete surface of roof slab & up to 300 mm of parapets and crumple joint including junction of roof and parapet. This stage shall be passed by the GE. Roof surface shall be left without any further treatment. (ii) Method: Cleaning the surface and applying Nitoproof 725 (minimum 0.8 mm dft) over a priming coat of Nitoproof WB primer or equivalent product of Asian paints, M/s MC Bauchemic / CIPY / SIKA / Pidilite Dr Fixit / Thermax / STP applied as per manufacturer’s instructions. (iv) The work shall be carried out complete as per manufacturer’s specifications and application methodology. Execution to be done with authorised trained / skilled applicator of manufacturer as per technical guidance laid by manufacturer.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 18cm deep and getting out in hard/ dense soil complete all as specified and directed.

M&L for 75mm thick cement concrete type D2, 1:4:8 (using 40mm graded stone aggregate) as in hard standing complete all as specified and directed.

S&F machine pressed rubber moulded coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 MM thickness, M 35 grade with grey cement and pigment bedded and laid over and including 50 mm thick sand cushion compacted and joint filled all as specified and directed.

M&L for point wiring with two runs of single core 1.5 Sq.mm. (Nominal area) PVC insulated FRLS Cable 1100Volts grade with copper conductor drawn in and incl with multistranded copper conductor cable confirming to IS drawn through and including non metallic PVC conduit and all conductor accessories(concealed) and including provision of multistranded 1.5 Sq.mm. PVC insulated copper conductor FRLS as earth wire connected to common earth dolly and earth in distribution board including cutting of stone masonary/ wall Complete for one light/exhaust fan/fan point controlled by one switch all as specified and directed. Note: Cutting chases, pinning in, making good etc for concealed wiring is included in quoted rate

All as per item Srl Item No 72 here in with but with 2.5 Sqmm FRLS copper cable for one 15 Amps power point and including 2.5 Sq mm FRLS copper conductor cable for earth continuity conductor and connecting it to earth all as specified and directed.

S &F PVC ceiling rose two to three terminals all as specified and directed.

S&F switch Modular type single pole 6 Amps One Way AC 230V, 50HZ supply all as specified and directed.

S&F Modular Switch 1 way 16 Amps 1 Module all as specified and directed.

S&F Modular Socket,6 A/16A,2 Module all as specified and directed.

S&F Modular Fan step regulator, 120W - 2 module all as specified and directed.

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F Sheet metal enclosure double door MCB DB Triple Pole and Neutral 4 way, 415 Volts with 200 A rated bus bar & neutral link complete including flushing the DBs inside the wall and making good to the disturbed surfaces all as specified and directed.

S&F MCB Triple Pole and Neutral, 230 volts, 16 to 32 Amps, 'C' Curve, 10 KA, including MCB Single pole and Neutral complete all as specified and as directed.

S&F 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers all as specified and directed.

S&F white cover plate with frame 2 module all as specified and directed.

S&F white cover plate with frame 8 module all as specified and directed.

S&F modular metal flush box 1/2 module all as specified and directed.

S&F modular metal flush box 8 module all as specified and directed.

Supply, laying, testing and Connecting of cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 Volts grade, cross sectional area 25 Sqmm 4 core cable all as specified and directed.

Supply, laying, testing and Connecting of cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 Volts grade, cross sectional area 16 Sqmm 4 core cable all as specified and directed.

S&F Busbar chamber step type design aluminium 63A 4 Way as specified and directed. Make : Indoasian Cat CPPI10245 or equivalent in havells / Schneider/GE

S&F 4 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 16 KA all as specified and directed.

S&F cable route indicator made out of 3 mm thick MS sheet of suitable size (As approved by Engr-in-charge) duly painted with two coats black paint over a coat of red oxide primer and writing cable direction, Nature of cable (i.e MAFI, MRS, Sub station etc.), size of cable (in SQMM), type of cable (LT cable) with white paint, mounted on angle iron 40x40x3 mm, angle height 45 cm, (30cm below ground level) with PCC 20cmx20cmx15cm all as specified and directed.

M & L for Earthing complete with galvanised earth plate electrode of size 600x600x6 mm thick burried directly in ground earth pit not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 mtrs below ground level connected to 4 mm dia GI earth wire as earth lead upto a length of 7.5 metre long by means of bolts,nuts, washers etc. and protected by GI pipe light grade 15mm dia and 20mm dia GI tubing light grade with funnel for watering, all as shown in electrical plate No 3 of SSR Part-I, back-fill with salt and charcoal, provision of test point including connected to earth test point and necessary earth work excavation in any type of soil PCC (1:3:6) type C1 bed and chamber RCC (1:2:4) type B1, iron grill including GI cover with hinge and funnel watering pipe etc all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr width and not exc 1.5 mtr deep for laying of pipe etc and getting out in hard/dense soil all as specified and directed.

Removing surplus soil to a distance 150mtr and deposit where directed at alevel not exceeding 1.5 mtr above the starting point all as specified and directed.

Supplying and laying un-reinforced precast concrete cable cover, class LV, Type 1 with peak, size 250 mm x 150mm x 40mm complete all as specified and directed.

SRI AYYAPPA ENTERPRISES (BID ID -3148906)

ANAND REFRIGERATION (BID ID -3152769)