SPL REPAIR TO BLDG NO. P-737 AND P-759 AGAINST JOB NO 81 SA/BTD/SR(BLDG)-02/2024-25 UNDER GE NORTH BATHINDA.

Taking down chowkhats or frames with shutters of PVC door , wooden door shutter, wooden window shutter , Mild steel window and Mild steel ventilators (without taking off shutters from the frames) area not exceeding 1.50 sqm each complete all as specified and as directed by Engineer-in- charge.

Supply & fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame /cupboard frame/ Chowkhat of Size 45mm x 70 mm comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 58 N /sqmm modulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retaident and fixed in position with and including MS hold Fast lugs / SS Dash Fastner of required dia and length with and including Supply & fixing (03 Nos Per Frame ) 100 mm long SS Butt Hinges with and making good with plastering/rendering etc. around the finished opening of the distrubed surface with Cement Mortar 1:4 complete all as specified and as directed by Engineer-in- charge.

Supply & fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) having minimum density of 650 kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /sqmm modulus of elasticity 850N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retardant and with and including Supply & Fixing of 02 Nos (per Leaf) SS 150mm long Tower Bolt with Stainlessd steel screws and including Supply & fixing of 02 Nos SS 150mm long handle with Stainlessd steel screws and 300 mm SS sliding door bolt with Stainlessd steel screws complete all specified and directed by Engineer -in-charge. Note:- The rate of 02 Nos. SS 150mm long Tower Bolt . 02 Nos. SS 150mm long handle and 300 mm SS sliding door bolt is included in this item and nothing shall be paid extra on this account.

Taking down chowkhats or frames with shutters of PVC door ,wooden door shutter, wooden window shutter , Mild steel window and Mild steel ventilators (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4.00 Sqm each complete all as specified and as directed by Engineer-in- charge.

Material and Labour PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in bed block of hold fast etc complete all as specified and as directed by Engineer-in-charge.

Supply & fixing factory made 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engineer-in-charge.

Supply and Fixing 35mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), using 2nd class hard wood (Bonsum/ Hollock) edges of frming plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc , sizes of members of shutters as specified in SSR Part-I, Section8, Clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and as directed by Engineer-in-Charge. Note:- Wire gauze/ glass shall be measured and paid separately.Note : - (i) The sutters shall be brought at site without primer and same shall be applying at site as per direction of Engineer-in-charge. Primer shall be measured paid separately under appropriate item (painting) of BOQ.

Supply & fixing Stainless steel galvanised wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm all as specified and as directed by Engineer-in- charge.

Supply & fixing 300mm mild steel ordinary rat tail rod springs (helical spring) CONFORMING TO is 452-1973 , including roller & roller plate, fixed with screws/welding to steel frames/chowkats, complete all as specified and as directed by Engineer-in- charge.

Supply and fixing stainless steel barrel tower bolts, 200 mm long conforming to IS 15833-2009, with bright bolts and fixed complete all as specified and as directed by Engineer-in-charge.

Supply & fixing 300mm long stainless steel sliding door bolts confoming to IS 15834-2008 , plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed length of bolt complete all as specified and as directed by Engineer-in- charge.

Supply and Fixing type 3 stainless steel door handle of size 150 mm conforming to IS 208-2020, fixed with countersunk conforming to IS 208-2020 complete all as specified and as directed by Engineer-in-charge.

Supply & fixing floor door stopper 150mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring complete all as specified and as directed by Engineer-in- charge.

Material and labour for Providing and fixing aluminium work with Polyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conformikng to IS:733 and IS :1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions i.e at top , bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth , rust free, straight, mitred and jointed mechanically wherever required including aluminium cleat angle, aluminium snap beading for glazing/ paneling , C.P. brass/ stainless steel screws, all complete all as specified and directed by Engineer-in-charge . Note :- (i) Weight of aluminium sections , aluminium cleat angles , aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading shall be physically ascertained through a board of officers convened by GE and payment shall be made only after ascertaining the actual weight of aluminium at site. (ii) The rate of material and labour for providing the EPDM rubber, neoprene gasket , C.P. brass / stainless steel screws are included in this item and nothing shall be paid extra on this account. (iii) During considering the weight of aluminium sections , aluminium cleat angles , aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading , the weight of EPDM rubber, neoprene gasket , C.P. brass/ stainless steel screws shall not be considered for measurments and payments. Only the weight of the aluminium sections , aluminium cleat angles, aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading shall be considered and measurment and payment shall be made accourdingly. (iv) During the weight of aluminium sections , aluminium cleat angles , aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading ,the weight of polyester powder coating 50 micron shall not be considered for weight but the rate of material and labour for providing polyester powder coating 50 micron is included in this item and nothing shall be paid extra on this account. (v) Glazing /Paneling and wire mesh shall be measured and paid seperately. (v)The board shall be duly countersigned by GE shall enclosed with Final Bill .

Supply & fixing Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed by Engineer-in-charge.

Supply & fixing 4.0 mm thick, sheet glass ordinary quality fixing with oil putty to steel surfaces not exceeding 0.50 sqm in each pane complete all as specified and as directed by Engineer-in- charge.

Supply & fixing 4.00 mm thick, figured glass, pin head type not exceeding 0.50 sqm in each pane complete all as specified and as directed by Engineer-in- charge.

Material and Labour for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-charge.

Material and Labour for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width & girth by applying one coat of synthetic enamel paint of approved tint complete all as specified and directed by Engineer-in-charge.

Material and Labour preparing New wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-charge.

Material and Labour for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width & girth by applying one coat of synthetic enamel paint of approved tint complete all as specified and directed by Engineer-in-charge.

Demolition of cement concrete un- reinforced of any description and in any position not otherwise specifically provided for and including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge

Supply only Liquid water proofing compound complete all as specified and directed by Engineer-in- Charge.

Material and labour for Waterproofing treatment to sunken floor using acrylic based multipurpose polymer. The treatment shall be carried out as per manufactures specification. The treatment shall be include of the following elements also: 1. Surface preparation of substrate by removing all traces of contaminates, loose and friable particles, cement laitance oils and grease, water repellent coatings etc 2. Injection grouting using cementitious grout if required. The payment for injection grouting shall be made separately etc. 3. Repair to the substrate, filling of blow holes/voids and surface leveling using appropriate products specified by the manufacture. 4. All intersections of horizontal and vertical surface should be profiled with a mortar fillet of minimum 25mm x 25mm. 5. The moisture content of the substrate shall be checked before application of first coat at water proof coating at the rate of 200 g/m2 followed brush topping at 450g/m2 per mm. The second coat shall be reinforced with glass fabric between the first and second coat. 6. The treatment shall be protected by application of polymer modified cement mortar of thickness 10mm applied at the rate of 50g per mm. 7. Tech specification : Tensile adhesion strength 0.5N/Sqmm (as bonding slurry).

Material and Labour For 30mm thick cement concrete (1:2:4) type B0 using12.5mm graded stone aggregates as in floor, Sunken floor etc Finished rough to receive tiles including mix WPC as per manufacturer's instruction complete complete all as specified and as directed by Engineer-in-charge. Note : WPC shall be measured and paid separately.

Material and labour for Aerated Autoclaved Concrete (AAC) blocks work according to Indian Standard specification IS:2185(Part-3)-1984 and latest revision built in Cement and sand mortar 1:6 with Aerated Autoclaved Concrete (AAC) blocks straight or curver on plan exceeding 6mtr Mean radius as in sunken floor complete all as specified and and as directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ) including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge.

Material and Labour anti slip coloured ceramic tiles 7 to 8mm thick (square/rectangular) of Size 400mmx400mm Sqm in floors including 10 mm thick bedding layer using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured epoxy grout to match the shade of tile including necessary cutting as per site requirement complete all as specified and as directed by Engineer-in-charge.

Supply and Fixing glazed ceramic coloured tiles 7.5 mm to 8.5mm thick 450mm x 300mm size in verticle surface including 10mm thick backing coat using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement etc complete all as specified and as directed by Engineer-in-charge.

Roughning surfaces of Old concrete floor by picking sweepoing clean and washing down with water to remove dust etc complete all as specified and as directed by engineer-in- charge.

Material and Labour for abrasion resistant ceramic tiles, area of each tile exceeding 0.18 Sqm but not.exc 0.38 sqm, 9-10mm thick (Square, Polished, Shade colour as approved by GE, in floor etc set and including 10mm thick bedding layer using type -I adhesive (thick bad fixing )conforming to IS 15477:2004 and pointed in white cement or colour cement to match the shade of tile including nrecessary citting as per site requirement having scratch hardness of the surfaces min 6 on Mohs Scall and abrasion resistance of class V Complete all as Specified and directed by engineer-in-charge.

Material and Labour for abrasion resistant ceramic tiles, area of each tile exceeding 0.18 Sqm but not.exc 0.38 sqm, 9-10mm thick (Square, Polished, Shade colour as approved by GE, on vertical Surfaces as in Skirting/Dado etc set and including 10mm thick rendering and using type -I adhesive (thick bad fixing )conforming to IS 15477:2004 and pointed in white cement or colour cement to match the shade of tile including nrecessary citting as per site requirement having scratch hardness of the surfaces min 6 on Mohs Scall and abrasion resistance of class V Complete all as Specified and directed by engineer-in-charge.

Material & Labour for Mirror polished kota stone slab as approved by GE 18-20mm thick laid over grey cement slurry @ 3.00kg per Sqm as in flooring, cills and stair case laid over with and including 15 mm thick cement screed base in CM 1:4 laid and jointed mixed with pigment to match the shade of the slab complete all as specified and as directed by Engineer-in-charge.

Material & Labour for Mirror-polished kota stone 18-20mm thick in riser of steps, skirting, dado and pillar and laid with and including grey cement slurry @ 3.00kg per Sqm laid over with and including10 mm thick cement plaster in CM 1:4 , laid and jointed mixed with pigment to match the shade of the slab complete all as specified and as directed by

Supply & fixing 600 mm long PVC connection 15mm size with PTMT nuts complete all as specified & directed by Engineer-in-charge.

Supply and fixing in repairs Stop valve / angle valve , cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule for 15 mm bore dia of pipe complete all as specified and as directed by Engineer-in- charge.

Supply & fixing in repairs chromium plated shower rose 125mm size, with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed by Engineer-in-charge.

Supply & fixing in repairs 15mm bore concealed stop cock cast copper alloy, chromium plated, fancy type, long shank and cup, screwed both ends suitable for iron pipe complete, all as specified & directed by Engineer-in-charge.

Supply & fixing in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and as directed by Engineer-in-charge.

Supply & fixing in replacement chromium plated stainless steel , soap tray size not less than 160mm, including fixing to wall with CP screws and PVC plug complete all as specified and directed by Engr-in-Charge

Supply and fixing in replacement 15mm bore Bib tap long body cast copper alloy, chromium plated , with crutch or butterfly handle with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge.

Supply and Fixing 19mm internal dia Stainless steel drapery rod with bracket incl wall and other side fancy knobs at both ends as approved by GE including taking down old existing rod/pelmet with accessories complete all as specified and directed by Engineer-in-charge.

Supply and Fixing 20 mm bore CPVC pipe SDR 11and plain CPVC SDR 11 fitting with all fitting and fixed to walls & ceilings or laid in floors, including taking down unservicable existing GI tubing of 20mm bore and fittings complete complete all as specified and as directed by Engineer-in-charge.

Supply and Fixing 25 mm bore CPVC pipe SDR 11and plain CPVC SDR 11 fitting with all fitting and fixed to walls & ceilings or laid in floors, including taking down unservicable existing GI tubing of 25mm bore and fittings complete complete all as specified and as directed by Engineer-in-charge.

Supply and Fixing 32 mm bore CPVC pipe SDR 11and plain CPVC SDR 11 fitting with all fitting and fixed to walls & ceilings or laid in floors, including taking down unservicable existing GI tubing of 32mm bore and fittings complete complete all as specified and as directed by Engineer-in-charge.

Supply & fixing in repair wash hand basin of size 550mm x 400 mm vitrous China white flat back including brackets, waste coupling & PVC Waste Pipe of 32mm dia etc complete all as specified and as directed by Engineer-in-charge .

Material and Labour in replacement vitreous china urinal of size 410mm x 380mm x 950mm, half stall type white, with grating and union for discharge pipe including CP urinal spreader and CP connection and waste pipe complete all as specified and Engineer-in-Charge.

Supply & fixing 110 mm bore of pipe PVC (SWR) type B ring fit pipes single socket in any length with laid in trenches complete all as specified and as directed by Engineer-in- charge. including Taking down old PVC eaves gutter and rainwater pipes ( of any size and pattern) including all fittings, compete all as specified and as directed by Engineer - in-charge.

Supply & fixing 110 mm bore of pipe PVC (SWR) type B ring fit pipes single socket in any length as shown in BTD Drg No. 916 sheet 1/4 to 4/4 and BTD-917 sheet sheet 1/1 of stays fixed to wall at a distance of 100-120mm away from walls complete all as specified and as directed by Engineer-in- charge. including Taking down old PVC eaves gutter and rainwater pipes ( of any size and pattern) including all fittings, compete all as specified and as directed by Engineer - in-charge.

Supply & fixing 110 mm bore, PVC (SWR) fittings Type -B such as bends, tee, 'Y' etc ; fixed to PVC pipes, complete all as specified and as directed by Engineer - in-charge.

Supply & fixing 75mm bore of pipe PVC (SWR) type B ring fit pipes single socket in any length as shown in BTD Drg No. 916 sheet 1/4 to 4/4 of stays to wall at a distance of 100-120mm away from walls ( of any size and pattern) including Taking down old PVC eaves gutter and rainwater pipes ( of any size and pattern) including all fittings, compete all as specified and as directed by Engineer - in-charge.

Supply & fixing 75 mm bore, PVC (SWR) fittings Type -B such as bends, tee, 'Y' etc ; fixed to PVC pipes, complete all as specified and as directed by Engineer - in-charge.

Supply & fixing 110 mm bore, PVC (SWR) fittings Type -B 'P' Trap , with grating including jointing to waste pipe with solvent cement complete all as specified and as directed by Engineer - in-charge.

Supply & fixing 75 mm bore, PVC (SWR) fittings Type -B floor Trap , with grating including jointing to waste pipe with solvent cement complete all as specified and as directed by Engineer - in-charge.

Supply & fixing 110 mm dia PVC (SWR) Type -B branch fittings Type -B piece, single (single Y) equal or unequalbranch piece single ( equal or unequal), ordinary or inverted or with parallel branches complete all as specified and as directed by Engineer-in-charge.

Supply & fixing in repair Gun metal, globe or gate valve (ISI marked), brass cast copper alloy, with iron wheel head, screwed both ends suitable for 20mm bore iron pipes complete all as specified and as directed by Engineer-in-charge.

Supply & Fixing in replacement vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm x 440 mm x 260 mm white with integral foot rests including connection to trap and to flushing pipe including lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and as directed by Engineer-in- charge.

Supply & fixing in replacement vitreous china wash down water closet pan (pedestal pattern, EWC) P Trap white clour , including connection to drain etc., including plastic water closet seat with cover (white clour) closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including stainless steel chromium plated jet spray with 01 mtr long PVC pipe with CP connector and necessary nut bolts and with necessary CP screws and plug for fixing WC complete all as specified and as directed by Engineer-in- charge.

Supply and fixing in replacement 10 litres capacity PVC valveless syphonic action type low level flushing cistern white with inlet, ball valve, float, handle including brackets and 32mm dia PVC flush pipe complete all as specified and directed by Engineer-in-Charge.

Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrieved material upto a distance n.exc 100m where directed, complete all as specified and directed by Engineer-in- charge.

Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof disposal off rubbish upto a distance not exceedomg 500.00mtr where directed ) complete all as specified and directed by Engineer-in- charge.

Material and Labour for Water proofing tratment to existing roof / terrace (material of water proof treatment as approved by GE) Single component, acrylic based, flexible, micro fibre reinforced waterproofing and heat reflective coating system. the treatment shall be carried out as per the manufacturers instructions and shall include the followings: (a) Preparation of substrate and cleaning it off all loose and triable by mechanical means (b) Open the cracks lines to form , V grooves with cutter/hammer/chisel up to 5-10mm and filling with crack filler and PU sealant. (c) application of primer coat @ 0.2 to 0.3 kg/ sqm followed by the first coat @ 0.75kg/ Sqm. (d) The second coat shall be applied @ 0.75 kg / Sqm and reinforced with fabric re-inforcement between the first and second coat. (e) The top coat of primer shall be applied after the second coat dries off @ 0.05-0.08 Kg per Sqm. (f) The material shall adhere to following specification. TECHNICAL SPECIFICATION OF MATERIAL Tensile Strength 1.5 MPa ASTM D412 Elongation at Break > 200% ASTM D412 Adhesion in Peel > 1.5 MPa (on concrete substrate) EN 1542 Crack Bridging Ability Passes upto 3.2mm Width ASTM C1305 Permeability to Water Vapour Passes IS 2645 Water Vapour Transimission ~ 23 g/m²/24hr ASTM E96 Water Absorption < 10% ( by Mass) ASTM D570 Microbiological Resistance No Algae & Fungal Growth ASTM D5590 Solar Reflectance Index 102 ASTM E1980. Note : Complete material shall be approved by GE and procured in bulk and kept in lock and key. Note : The installation company should be trained and authorized by Manufacturer & installation to be carried out as per manufacturers approved method statement. All auxiliary & accessories involved during application should be supplied by single manufacturer as a part of system. Any component used which is not manufactured by the particular manufacturer can only be used with official approval from manufacturer in consultation with GE.

Material and Labour for PCC padding in 1:2:4 Type B-1 (using 20mm graded stone aggregates) as in roof slab finishing the surface even and fair and maintain roof slope during the execution of work including Liquid water proofing compound complete all as specified and directed. Liquid Water proofing compound shall be measured and paid separetly as supply only under appropriate item of Schedule 'A' BoQ.

Taking down cement plaster of any description, any thickness from internal and external surfaces of walls/soffits / chajjas/parapet walls /ceiling etc .incl raking out joints, hacking for keys, scrubbibg down with water etc and including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge

Material and Labour for Cement plastering 10mm thick in cement mortar 1:3 on fair faces of concrete ceiling surfaces finished fair & even without using extra cement complete all as specified and directed by Engineer-in- Charge.

Material and labour for 15mm thick rendering in 1:6 Cement Mortar on brick /concrete of wall surfaces including finishing the surfaces even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge. .

Material and labour for 15mm thick rendering in 1:4 Cement Mortar on brick /concrete of wall surfaces including finishing the surfaces even and smooth(without using extra cement complete all as specified and directed by Engineer-in-charge.

Demolition of brick work masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and as directed by Engineer-in- charge.

Material and Labour Brick work with sub class ‘B’ burnt clay old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in- charge.

Material and Labour 75mm thick PCC 1: 3: 6 type C-1 ( using 20mm graded stone aggregate ) in plinth protection, including finishing the surface even and smooth without using extra cement.by Engineer-in-charge.

Demolition of RCC of any description and any position not otherwise specially provided and including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance not exceeding 500 metres away from the site complete all as specified and as directed by Engineer-in-Charge..Note:The weight of scrap iron for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill.

Material and Labour for RCC 1:2:4 ( Nominal Mix ) type B1 using 20mm graded stone aggregate as in chajjas complete all as specified and directed by Engineer-in-charge.(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.

Material and labour for Formwork to chullah hoods , troughs and similar items including edges on rough finished flat surfaces of concrete complete all as specified and as directed by Engineer-in-charge.

Material and Labour for MS TMT bars 10mm dia and over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia including making of rungs, handles etc complete all as specified and as directed by Engineer-in-charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)

Supply & fixing in repairs Rotational Moulded Polyethylene water storage tank ISI Marked of capacity 1000 litres (cylindrical vertical, with closed top), hoisted and fixed in position including making inlet and out let connection complete all as specified and as directed by Engineer-in-charge. (Note :- Ball valve and gate valve shall be measured & paid separately under appropriate items of Schedule 'A' BoQ.)

Supply and Fixing Ball valve high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm bore (minimum weight 20mm-210 gram) complete all as specified and as directed by Engineer-in- charge.

Material and Labour for preparing new plastered surfaces of ceilings and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and directed by Engineer-in- Charge.

Material and Labour for preparing of old decorated (Plastered / unplastered ) surfaces of ceilings and with and including applying acrylic wall care putty (thickness vary from 1.5 to 2.5 mm ) as required for desired smoothness and leveling of surfaces in two or more layers) by using ready made acrylic wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving white wash with and including applying two coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by Engineer-in-Charge.

Complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projections etc with mechanical means/grinder complete all as specified and directed by Engineer-in- Charge.

Material and Labour for applying acrylic wall care putty on internal surfaces and external surfaces of walls/ceilings/soffits (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and leveling of surfaces in two or more layers) by using ready made acrylic wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed by Engineer-in- Charge. Make of acrylic wall care Putty : AS described in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order. (ii)The make of acrylic wall care putty shall be as per the recommendation of manufacturer of paint.

Material and Labour for prepration of surfaces with and including applying 02 coats of Interior Acrylic Emulsion Paint (shade as approved by GE ) , @ 10.00 Sq.m/ litre /2.00 coats by using roller to internal wall surfaces over with and including one coat of Interior Acrylic Emulsion Primer @ 10.00 Sq.m / litre / 1.00 coat by using roller as recommended for under coat by manufacturer of Interior Acrylic Emulsion by using the brands of Interior Acrylic Emulsion Paint and Interior Acrylic Emulsion Primer as described in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after complete all as specified and directed by Engineer-in- Charge.

Material and Labour for prepration of surfaces with and including applying 02 coats of Exterior Acrylic Emulsion Paint (shade as approved by GE) with highlighter of any approved shade, @ 5.00 Sq.m/ litre / 2.00 coats by using roller to External walls / RCC surfaces / Soffits of Chajjas / Roof projections / Cantilevers / Balcony etc. surfaces over with and including one coat of Exterior Acrylic Primer @ 11.00 Sq.m / litre / 1.00 coat by using roller as recommended for under coat by manufacturer of Exterior Acrylic Emulsion by using the brands of Exterior Acrylic Emulsion Paint and Exterior Acrylic Emulsion Primer as described in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after complete all as specified and directed by Engineer-in- Charge.

Supply & Fixing 4mm Wire for laying mosquito nets in OR line, fixing with angle and provide necessary arrangement for lightning of GI wire complete all as specified and directed by Engineer-in- Charge.

Supply and fixing in repairs 15mm bore Swan Neck type Pillar taps, cast copper alloy, with capstan heads, chromium plqated, fancy type, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr In Charge

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed by Engineer-in- Charge.

Material & Labour 4.0mm thick Sheet glass,ordinary quality and glazing with oil putty in square exceeding 0.50 sq. m in each pane complete all as specified and directed by Engineer-in- Charge..

Material and labour 18-20mm thick machine cut, granite duly factory grinding and polished (table rubbed and polished) of approved colour for counter sunk wash basin, plateform /cooking plateform , steps, jambs,pillars, window cills, , shelves, urinal partition and like , including screed bed 15mm thick in cement mortar (1:4) (grey cement slurry) including pointing in white cement (1:2) using marble dust with admiture of pigment to match with shade of granite stone slab including cutting as required including cleaning and extra polishing if required complete all as specified and as directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter depth for foundation etc or for shafts , wells, cesspits, manholes , septic tank, for laying of cables , laying of pipes not exceeding 10 Sqm on plan and not exc 1.5 meter depth and getting out in soft/loose soil etc complete all as specified and as directed by Engineer-in- charge.

Demolition and Breaking of Drain Pipes SGSW, AC reinforced concrete pipe of 150 mm bore pipes complete all as sp[ecified and directed by Engineer-in- charge. complete all as specified and as directed by Engineer-in-Charge .

Material and labour for PCC (1:3:6) type C-2 using 40 mm graded stone aggregates as in concrete bed of drain pipes of 150 mm bore, laid to required slope including packing under and haunching against the sides of pipes after they are laid and tested including form work complete all as specified and as directed by Engineer-in-charge. Note :- (i) Thickness of concrete bed below the barrel of pipe shall be 10 cm. (ii) Width of concrete bed shall be outer diameter of drain pipes (not of sockets / collar) plus 30cm.

Supply and laying DWCPE (SN 8) drain pipes 150 mm nominal dia as per IS-16098 (Part-II), laid in trenches on bed including all accessories/ fittings/ jointed ring, jointing and testing complete all as specified and as directed by Engineer-in- charge. Note:- Excavation , earth work, bedding and pedestal / anchorage if required shall be measured and paid separately under appropriate item of BOQ/ Sch 'A'

Material and labour for cement concrete (1:3:6), type C-2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed by Engineer-in-charge.

Material and labour for cement concrete (1:2:4), type B-1 using 20 mm graded stone aggregate as in benching of Manholes, Coping etc. etc complete all as specified and as directed by Engineer-in-charge.

Supply and fixing SFRC (steel fibre Reinforcement concrete cover & Frame ) Heavy Duty HD-20, Grade designation 650mm internal diameter conforming to IS -12592, graded rectangular clear Opening 700mm x 700mm, total weight of cover and frame not lless than 182 Kg fixed in cement concrete (1:2:4) etc complete all as specified and as directed by Engineer-in-charge.

Returning and filling including spreading, leveling watering and well ramming in layers not exceeding 25cm thick in soft/loose soil complete all as specified and as directed by Engineer-in-charge.

Removing excavated material (Soils ) exceeding 50m and not exceeding 500m depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for Internal dia of pipe in 150 mm complete all as specified and as directed by Engineer-in-charge.

Dismantling R.C.C posts or struts and Mild steel angle iron post and angle iron struts of any section, including taking out embedded portion Concrete, brick work, masonry, etc. and making good disturbed ground complete all as specified and directed by Engineer-in- charge. Note:1.The weight of scrap iron in kilogram for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill. 2. The rate of taking out from concrete embedded portion is included in this item and nothing shall be paid extra on this account.

Dismantling of fencing wire mesh, including round bar , Mild steel flat iron, nuts, bolts ,washers etc. any type complete all as specified and directed by Engineer-in- charge. Note:The weight of scrap iron in kilogram for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill.

Material and Labour for Excavating in post holes (or similar holes) each not exceeding 0.5 cu. m, in soft / loose soil and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and consolidation , removing surplus soil to a distance not exceeding 50 mtr and making good distrubed ground complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Mild steel work of Fe-290 Gde E -165 as in angle iron fencing posts & flat iron drilled and countersunk for boulders running bars,including embedding in concrete and scruing etc,post and struts in fencing including cutting, tops to shape as directed, bent to shape, drilling holes, notching for wire etc,flat iron fillets (for securing wire mesh etc.) Including all necessary drilling,bolting or riveting etc.complete all as specified and directed by Engineer-in-charge. Note:- (i)The element of Fixing of round bars for chain link fencing is included in this item .Nothing shall extra be paid on this account ..complete all as specified and directed by Engineer-in-charge. (ii) concrete work for embeding shall be measured and paid seperately under respective item of Schedule'A' BoQ.

All as per serial item no. 105.00 here--in before except angle iron including embedding in concrete and scruing etc,post and struts in fencing . Note:- (i)The element of Fixing of round bars for chain link fencing is included in this item .Nothing shall extra be paid on this account ..complete all as specified and directed by Engineer-in-charge. (ii) concrete work for embeding shall be measured and paid seperately under respective item of Schedule'A' BoQ.(iii) old servicable angle iron shall be retrived from serial item no.102.00 here-in-before.

Supply only 10mm dia MS round bar for fixing of chain link fencing with post complete all as specified and directed by Engineer-in-charge. Note :-Fixing element of this item is included in serial item no. 105.00 & 106.00 here-in-before.

Supply & fixing Mild steel screw bolts (machine made) 5 to 10mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and as directed by Engineer-in-charge.Note:The weight of scrap iron for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill.

Supply only chain link fencing, galvanised mild steel of mesh of any size any type complete all as specified and directed by Engineer-in-charge. . Note : The weight of chain link fencing shall be ascertained by BOO as ordered by GE and payment shall be paid accordingly. BOO duly counter signed by GE shall be enclosed with final bill.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed by Engineer-in- charge. ( Note :-(i) supply only Chain link for fencing will be measured and paid separately).(ii) The rate of binding wire for fixing of chain link fencing is included in this item and nothing shall be paid extra on this account.

Dismantling interlocking paver block complete all as specified and directed by Engineer-in-charge.

Material and labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade colour and pattern as approved by GE with grey cement and pigment complete all as specified and as directed by the Engineer-in-Charge.

All as per Item No-112.00 here-in- before but except Interlocking Paver blocks .Interlocking Paver blocks shall be reterived from serial Item No -111.00 here -in -before for using under this item complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for 25mm thick Sand filling under interlocking tiles including watering and consolidation complete all as specified and as directed by the Engineer-in-Charge.Note: Sand shall be approved by GE before incorporation in the work.

Material and labour for 75 mm thick cement concrete 1:4:8 , type D-2 using 40 mm graded stone aggregate as in sub base of floor. finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.

Supply and Fixing Mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete complete all as specified and directed by Engineer-in -charge.

Material and Labour for Earth filling in Traverse including watering and consolidation complete all as specified and as directed by Engineer-in- charge. Note: Earth for filling in Traverse shall be obtained from the out side of MOD land and necessary record shall be maintained properly.No earth for filling shall be used of MOD Land. Necessary certificate that earth for filling in traverse is brought from MOD Land duly signed by GE shall be enclosed with final bill.

Forming embankment in soft/loose soil including raising (or lowering) earth, spreading in layers not exc 30 cm thick, watering/rolling with 8 to 10 Tonn power roller and finishing to reqd size, shape etc .not exc 1.50 mtr high form the starting point on 95% standard proctor density complete all as specified and as directed by Engineer-in- charge. NOTE: (i) The compaction of earth filling is to be carried out under optimum moisture condition with 95% of Standard Proctor density. (ii) Rate of Earth filling as material and labour is not included in this item. Earth filling shall be provide under serial item no.117.00 of BoQ here-in-before.

Material and Labour for Drilling Holes of 12mm dia up to 100 mm deep holes in slab at the interval of 300 mm or as directed by Enginner-in-charge in staggered manner or along the crack line in Reinforced Concrete (RC) structural element including cleaning of the holes by air blower and inserting 12mm dia NRV (Non Returnable Valve) nozzle compatible with epoxy injector and having machined external end to receive outlet of Grouting Gun. Fix inside the hole by applying thixotropic epoxy adhesive to ensure complete sealing and allow curing the system for minimum of 8 Hrs before Grouting including nozzle projections, excess putty, if any, over concrete element by grinding, leveling and finishing the external surface, after completion of the work, etc. complete all as specified and as directed by Engineer-in-charge.

Supply and Grouting, injecting two part, low viscosity, moisture insensitive injection liquid, based on high strength epoxy resin by pressure and using pressure epoxy injector with accessories till nozzle refused to accept the grout including mixing of grout for column, beam and roof slab having following properties:- (i) Mixed Density 1.1 kg/l (at +27°C); Viscosity ~ 250 mPas at +30°C and should comply according to ASTM C 881, Type II and IV, Grade-1, Class E+F (ii) Compressive strength >= 70 N/sqmm (7 days) according to ASTM D 695; Tensile Strength >= 30 N/sqmm (after 7 days at +30°C cure) (According to ASTM D 638); (iii) Bond Strength ~ 10.8 N/sqmm (failure in concrete) after 14 days at +30°C cure; Flexural strength ~ 50 N/sqmm according to ISO 178. (iv ) Seal the nozzle with thixotropic epoxy adhesive after the refusal of grout material from the nozzle. Note:- leakage through other nozzle or cracks are required to be monitored while grouting and such points to be sealed as and when required without any extra cost complete all as specified and as directed by Engineer-in-charge. Note :- Mode of measurement: per kg of material consumed

Material and Labour for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over with and including one coat of red oxide zinc chrome primer complete all as specified and as directed by Engineer-in-charge.

Taking down carefully copper /aluminium point wiring (light, fan, socket or power point ) complete including fitting such as hylem , sheet switches, ceiling rose, pendent holder , sockets, fan regulator , bell push, Electronic bell , sunken box except concealed conduit etc. complete all as specified and directed by Engineer-in-charge. (i) The weight of aluminium scrap , copper scrap and Iron scrap shall be ascertained by BOO as ordered by GE and same duly countersinged by GE shall be enclosed with final Bill. Bathinda.The copy of BOO duly countersinged by GE shall be enclosed with final Bill. (ii) The rate of cutting chases (as required) and making good surfaces to match with adjoining surface shall be measured and paid seperately under serial item nos. 129.00,130.00,131.00,132.00 & 133.00 of BoQ.

Material and labour for concealed Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits)with two single core 2.5 sqmm (nominal cross section area ) FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked ) using approved colour coding as per IS (Red, Black and Green for single phase circuits) in existing concealed surface conduit and New GI sunken box (thickness not less than 1.2mm) covered with new 3 mm thick bakelite laminated hylem sheet (ISI marked) and fixed with brass screws & cup washers for one light point / fan point / exhaust fan controlled by one switch , with and including one single core 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable 1100 volt ISI Marked continues as earth wire connected to earth dolly etc. with and including cutting chases (as required) and making good surfaces to match with adjoining surface complete all as specified and as directed by Engineer-in- charge Notes for serial item nos. 124.00,125.00,126.00,127.00 & 128.00 : (i) switches one way 5 /6 Amp , socket out let 5Amp /6 Amp , two way switches 5 /6 Amp and bell push switch shall be measured and paid seperately under respective items of Schedule'A' BoQ. (ii) All wires going into SP, SPN, TPN, MCCB shall have copper lugs of adequate size.

All as per item No 124.00 here- in -before but for one Socket outlet 5 Pin, 5/6 Amp, flush type on same board complete all as specified and as directed by Engineer-in- charge.

All as per item No124.00 here- in -before but for one Socket outlet 5 Pin, 5/6 Amp, flush type on independent board complete all as specified and as directed by Engineer-in- charge.

All as item No 124.00 here -in- before but for one light point controlled by Two Two way switch complete all as specified and directed by Engineer-in-chrage.

All as per item No124.00 here -in- before but for one Socket outlet multipurpose 2 in 1, 6 Pin, 6/16 Amp, flush type complete all as specified and as directed by Engineer-in- charge.

Material and labour for concealed Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), in PVC conduit complete with two single core 2.5 Sqmm (nominal cross section area ) FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked ) drawn through with and including PVC rigid conduit 20mm dia ( heavy duty ) ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories) with all fittings and all accessories i.e pipe bend pipe hook, elbow,junction box, pressed steel powder coated sunken box of suitable size (min 60mm deep, suitable length and 1.2mm thick ) and flush fixed with cement mortar 1:4 , 3mm thick bakelite plastic laminated sheet for mounting with frame and top cover for 15 Amp switches and socket point controlled by one switch 15 Amp, top cover fixed with brass screws & cup washers with and including single core 2.5 sqmm FRLSH PVC insulated multi strand copper conductor wire ISI Marked continues as earth wire connected to earth dolly etc with and including cutting chases (as required) and making good surfaces to match with adjoining surface complete all as specified and as directed by Engineer-in- charge . Note for serial item no.129.00 ,130.00,131.00 & 132.00 : (i) switches 5Amps & 15Amps , socket outlets 5Amps & 16 Amps & fan regulator shall be measured and paid seperately under respective items of Schedule'A' BoQ.(ii) The rate of cutting chases (as required) and making good surfaces to match with adjoining surface is included in this item and nothing shall be paid extra on this account. (iii) On RCC roof / ceiling PVC conduit shall be provided on surface with proper fixing clips as directed by Engineer-in- Charge.The rate of this element is included in this item and nothing shall be paid extra on this account. (iv) All wires going into SP, SPN, TPN, MCCB shall have copper lugs of adequate size.

All as per item No 129.00 here- in -before but for one Socket outlet 3/5 Pin, 5/6 Amp,250 volts flush type on same board complete all as specified and as directed by Engineer-in- charge.

All as per item No129.00 here- in -before but for one Socket outlet 5 Pin, 5/6 Amp, 250 volts flush type on independent board complete all as specified and as directed by Engineer-in- charge.

All as per item No129.00 here -in- before but for one Socket outlet multipurpose 2 in 1, 6 Pin, 6/16 Amp, flush type complete all as specified and as directed by Engineer-in- charge.

Material and labour for Flame Proof Point wiring (using red, black and green colour wires as colour coding for single phase circuits) complete with two single core 2.5 Sqmm (nominal cross section area) FR-LSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) for Phase, netural . drawn through , with and including Fame Proof Rigid Stove Enamelled Black ERW Conduit minimum 20mm dia with and including all flame proof fittings and accessories i.e. flame proof joint,flame proof pipe bend, flame proof union,flame proof reducer,flame proof nipple, pipe hook, Screws, GI saddles, clamps, connectors etc, with and including one single core 2.5 Sqmm FRLSH PVC insulated multi strand copper conductor cable 1100 volt grade (ISI marked ) (as in green colour) as continues earth wire connected to earth dolly etc. with and including cutting chases (as required) and making good surfaces to match with adjoining surface complete all as specified and as directed by Engineer-in- charge . Note for serial item no. 133.00 : (i) flame proof rotary type switch shall be measured and paid seperately under appropriate item of schedule 'A' BoQ. (i) The rate of cutting chases (as required) and making good surfaces to match with adjoining surface is included in this item and nothing shall be paid extra on this account. (ii) All wires going into SP, SPN, TPN, MCCB shall have copper lugs of adequate size

Supply and Fixing flame proof rotary type switch with termination box in LM6, 16A, Single pole 250 volts complete all as specified and as directed by Engineer-in- charge

Supply & Fixing Flame proof LED light fittings 2 x 8 watt CMRI certified recommended for gas vapor group of IIA & IIIB Zone 1 & 2 and IP-65 protection with die cast aluminium hosing with heat resistant toughened glass with LED tube light fixtures , driver, holder, connector etc. complete with all accessories , as per manufacturer's instructions prewired and including connecting up with three core flexible copper cable of suitable size complete all as specified and as directed by Engineer-in-charge.

Supply & Fixing Flame proof LED light firtings 16 watt for security light CMRI certified recommended for gas vapor group of IIA & IIIB Zone 1 & 2 and IP-65 protection with die cast aluminium hosing with heat resistant toughened glass with LED tube light fixtures , driver, holder, connector etc. complete with all accessories as per manufacturer's instructions prewired and including connecting up with three core flexible copper cable of suitable size complete all as specified and as directed by Engineer-in-charge.

Supply and Fixing switch piano flush type single pole one way 5 /6 Amp complete all as specified and as directed by Engineer-in- charge.Note: (i) Labour element for taking down old unservicable material is included in serial item no.123.00 of BoQ here-in -before and nothing shall be extra paid on this account.

Supply and Fixing switch piano, flush type single pole two way 5 /6 Amp, 240 volts all as specified and as directed by Engineer-in- charge.Note: (i) Labour element for taking down old unservicable material is included in serial item no.123.00 of BoQ here-in -before and nothing shall be extra paid on this account.

Supply and Fixing switch piano flush type single pole one way 15 /16 Amp complete all as specified and as directed by Engineer-in- charge.Note: (i) Labour element for taking down old unservicable material is included in serial item no.123.00 of BoQ here-in -before and nothing shall be extra paid on this account.

Supply & fixing Socket outlet multipurpose 2 in 1, 3/5 Pin, 5/6 A, flush complete all as specified and as directed by Engineer-in- charge.Note: (i) Labour element for taking down old unservicable material is included in serial item no.123.00 of BoQ here-in -before and nothing shall be extra paid on this account.

Supply & fixing Socket outlet multipurpose 2 in 1, 3/5 Pin, 15/16 A, flush complete all as specified and as directed by Engineer-in- charge.Note: (i) Labour element for taking down old unservicable material is included in serial item no.123.00 of BoQ here-in -before and nothing shall be extra paid on this account.

Supply and Fixing Ceiling rose, PVC/ polycarbonate, isolated body complete all as specified and as directed by Engineer-in- charge. Note: (i) Labour element for taking down old unservicable material is included in serial item no.123.00 of BoQ here-in -before and nothing shall be extra paid on this account.

Supply and Fixing lamp holder PVC/ polycarbonate type with back plate suitable for batten fitting with LED bulb 9 watt complete all as specified and as directed by Engineer-in- charge.Note: (i) Labour element for taking down old unservicable material is included in serial item no.123.00 of BoQ here-in -before and nothing shall be extra paid on this account.

Material and Labour in replacement Air termination, single pointed aluminium rod 12mm dia and 300mm long complete all as specified and directed by Engineer-in- charge.

Material and Labour in replacement Test point terminal block made of gun metal or phosphorus bronze size 75mm x 75mm x 25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screwcomplete all as specified and directed by Engineer-in -charge

Material and Labour in replacement Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and as directed by Engineer-in- charge.

Supply and fixing in replacement sheet metal enclousers made out of CRCA mild steel sheet , not less than 1.2mm, IP-54 protection, flush mounted with metal door, powder coated DB SPN 8 way 230 V AC with 200 Amp rated copper bus bar, Double Door,08 modules, dust and vermin proof suitable for incorporation of MCBs / MCCBs/ Isolators etc.conforming to IS/IEC-61439-2:2011, BS-5484 complete all as specified and directed by Engineer-in-charge. Notes: (i)MCBs / MCCBs/ Isolators shall be measured and paid seperately under appropriate items. (ii) The rate of 200 Amps copper bus bar is included in this item and nothing shall be paid extra on this account.

Supply and Fixing RCCB for earth leakage, Over Load and short circuit protection suitable for 230 volt, AC supply , 63 Amps double pole rupturing capacity not less than 30mA complete all as specified and directed by Engineer-in- charge. Note: (i) Labour element for taking down old unservicable material is included in serial item no.147.00 here-in-befoe of BoQ here-in -before whereas applicable nothing shall be extra paid on this account.

Supply and Fixing MCB SPN 63 Amps, 10 KA, ‘C’ Curve, 240 V AC,50 Hz complete all as specified and as directed by Engineer-in- charge.Note: (i) Labour element for taking down old unservicable material is included in serial item no.147.00 here-in-befoe of BoQ here-in -before whereas applicable nothing shall be extra paid on this account.

Supply and Fixing MCB SP 6 to 32 Amps 240, 10 KA ‘C’curve complete all as specified and as directed by Engineer-in- charge.Note: (i) Labour element for taking down old unservicable material is included in serial item no.147.00 here-in-befoe of BoQ here-in -before whereas applicable nothing shall be extra paid on this account.

Supply and laying or fixing or laid in trenches/ ducts/ through pipes/ in floors / under roads/ hard standing /along poles and testing LT cable XLPE, PVC insulated screened, bedded, galvanised steel strip or wire armourd cable (heavy duty) 1100 volt grade with aluminium conductor having cross sectional area 16 Sqmm 2 core conforming to IS-7098 (Part-I -1988) including taking out old unservicable cable with and including taking out old unservicable bricks/ PCC Covers complete all as specified and as directed by Engineer-in-Charge.Note:- 1.Excavation and earth work, sand cushioning & GI pipe shall be measured and paid for separately. 2. The rate of taking out old unservicable cable and taking out old unservicable bricks/ PCC Covers is included in this item and nothing shall be paid extra on this account.

Taking out old unservicable cable and brick protection and Supply and laying or fixing or laid in trenches/ ducts/ through pipes/ in floors / under roads/ hard standing /along poles and testing LT cable XLPE, PVC insulated screened, bedded, galvanised steel strip or wire armourd cable (heavy duty) 1100 volt grade with aluminium conductor having cross sectional area 50 Sqmm 4 core conforming to IS-7098 (Part-I -1988) complete all as specified and as directed by Engineer-in-Charge. Note:- 1.Excavation and earth work, sand cushioning & GI pipe shall be measured and paid for separately. 2. The rate of taking out old unservicable cable and taking out old unservicable bricks/ PCC Covers is included in this item and nothing shall be paid extra on this account.

Material and Labour sand cushioning, with dry and clean fine river sand for underground cable 8 cm before laying cable and 15 cm after laying and punned to 18 cm after laying of cable complete all as specified. (Note:- Punned thickness shall be considered for payment purpose)

Supply and laying Best quality, locally available, sub class ‘B’ burnt clay bricks (Old Size) for cable protection, laid flat and dry in trenches over the cable , perpendicular to the direction of cable complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing GI tubing, light grade 20 mm bore complete with all fittings for cable protection, fixed along poles or laid under floor , under road and hardstanding etc. and making good after laying of cable complete all as specified and as directed by Engr - in- Charge.

Supply and fixing GI tubing, light grade 40 mm bore complete with all fittings for cable protection, fixed along poles or laid under floor , under road and hardstanding etc. and making good after laying of cable complete all as specified and as directed by Engr - in- Charge.

Supply and fixig in replacement of wall Mounted battern fittings Square profile 20 watt White flux appx 4.00 feet long , pre wired complete fitting and all other accessories fitting arrangements as per manufacturer's instructions including and connection with flexible twin core copper cable of size 23/.00076 from ceiling rose to fitting complete all as specified and as directed by Engineer-in- charge.

Supply and Fixing in replacement LED mirror light fitting 10 watt , 6000K linear and compact with decorative grey end caps , polycarbonate body and ribbed opal diffuser complete fitting with Lamp & all other accessories fitting arrangments complete all as per manufacturer's instructionons and connection with flexible twin core copper cable of size 23/.00076 from ceiling rose to fitting complete all as specified and as directed by Engineer-in- charge.

Supply and laying in replacement Sleek pressure die cast aluminium houshing, heat resistant glass, Energy saving, IP-65 protection, better optics for uniform distribution street / Roadway luminaire with high power LED 25 watt complete fitting with driver, LED strip and all other Accessories etc. suitable for 42mm / 32mm OD Entry for direct mounting on pipe bracket fixing on poles / along wall with and including bracket made out of GI Tube light Grade 40mm dia, 2.00 mrtre long bend to shape of 120 degree angle at half metre from botom (as per sample) fixing with MS Clamp (02 Nos) and nut bolts with and including applying two coat of aluminium paint over a coat of red oxide primer on bracket and clamps, with and including making electric connection with using twin core copper cable of suitable size from connection point to fitting complete all as specified and as directed by Engineer-in- charge.

Material and labour in replacement Sub main wiring complete with two single core 6 sqmm,1100 volts grade, ISI Marked , PVC insulated, multi stranded copper conductor cable FRLSH with and including single core 6 sqmm,1100 volts grade,ISI Marked, PVC insulated, multi stranded copper conductor cable FRLSH for earth wire in existing PVC concealed conduit (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and directed by Engineer-in-charge. Notes:- (a) Three single core 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade shall be measured as one length. (b) All wires going into SP, SPN, TPN, MCCB shall have copper lugs of adequate size.

Material and Labour in replacement Sub main wiring with two single core of size 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade,ISI Marked including cuttting, chasing and grouting including non metallic rigid PVC conduit medium quality of size 25 mm dia conforming to 3537 Part-I ISI marked including all fitting such as Tee, Elbow, bend etc drawn in and including one single core of size 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade ,ISI Marked as in contineous earth conductor cable connected to earth dolly complete all as specified and as directed by Engineer-in- charge. (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and as directed by Engineer-in- charge. .Notes:-(a) Cost of PVC conduit , conduit accessories and earth wire included in sub main wiring. (b) Three single core 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including non metallic rigid PVC conduit of size 25 mm dia shall be measured as one length. (c) All wires going into SP, SPN, TPN, MCCB shall have copper lugs of adequate size

Supply and Fixing in repair Sheet metal enclousers made out of CRCA mild steel sheet not less than 1.2mm thick,, IP-54 protection, flush mounted for metal door, powder coated DB VTPN 4 way, 415 V AC with 200 Amps rated copper bus bar, Double door, dust and vermin proof suitable for incorporation of Incoming MCCB and outgoing MCBs / MCCBs/ Isolators and earth & neutral bus bar etc conforming to IS/IEC-61439-2:2011, BS-5484 complete all as specified and as directed by Engineer-in- charge. Notes: (i)MCBs / MCCBs/ Isolators shall be measured and paid seperately under appropriate items. (ii) The rate of 200 Amps copper bus bar is included in this item and nothing shall be paid extra on this account.

Supply and Fixing MCCB 4 pole of rating 100 Amp, Icu -100% 16 KA, thermal magnetic based complete all as specified and as directed by Engineer-in- charge. Note: (i) Labour element for taking down old unservicable material is included in serial item no.162.00 here-in-befoe of BoQ here-in -before whereas applicable nothing shall be extra paid on this account.

Material and Labour in replacement sheet metal enclosure with socket and plug top and MCB single pole enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amp 230 Volt complete all as specified and as directed by Engineer-in- charge.

Supply , Fixing and testing in replacement of water heater (Geyser) Auto restart and safety measures type electrical operated 230/240 Volts 25 ltr capacity, BEE 5 star rated complete with all safety equipment and accessories such as safety valve, thermostat, plug top, etc. required for proper functionality & with and including electric/ earth connections and carrying out grounting & complete installations with mounting bolts,nuts including testing after installation complete all as per manufacturer's instructions complete all as specified & directed by Engineer-in- Charge.Note: Old unservicable Geyser shall be deposited in the store yard of AGE (E/M) GE (North) Bathinda . The rates of this aspect are included in this item and nothing shall be paid extra on this account.

Supply & Fixing and testing in replacement Exhaust fan (Heavy duty) steel body, AC, Single phase 230 volts,50HZ,900 RPM ,300 mm sweep BEE, 5 star rated a with blades and frame including new mosquito stainless steel wire mesh of guage 0.36mm with suitable wooden frame protection against birds etc. mounted in suitable opening arrangmement in wall and electric connection with and including three core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm drawn in flexible PVC Conduit and hanging on wall with 04 Nos. steel fastners 10mm dia 100mm long with and including serial number of fan as issued by Engineer-in-charge and GE office name with red colour permaent marker complete all as specified and directed by Engineer-in- charge.Note: Old unservicable Exhaust fan shall be deposited in the store yard of AGE (E/M) GE (North) Bathinda . The rates of this aspect are included in this item and nothing shall be paid extra on this account.

Supply & Fixing in replacement Ceiling fan of 1200mm sweep complete with blades, down rods, including remote for control with cell and accessories, 230 Volts, single phase, 50 Hz, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current (BLDC) motor connecting up complete with and including three core flexible PVC insulated multi stranded copper conductor cable of suitable size from ceiling rose / connector, including extra GI / MS pipe down rod, as per site requirement , with and including serial number of fan as issued by Engineer-in-charge and GE office name with red colour permaent marker complete complete all as specified and as directed by Engineer-in-charge.Note: Old unservicable ceiling fan shall be deposited in the store yard of AGE (E/M) GE (North) Bathinda . The rates of this aspect are included in this item and nothing shall be paid extra on this account.

Material and Labour in replacement for Earthing complete with galvanized steel earth plate electrode 60 cm x 60cm x 6.00mm thick buried direcly in ground vertically to a depth not less than 2.25 meters below normal ground level with the top edge of earth plate not less than 1.5 meters below ground level connected to and including galvanized iron strip 25mm x 4 mm as earthing lead by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel all as shown in electrical plate No.3 of SSR Part - I and earth lead protected by galvanized pipe light grade 40 mm bore (ISI marked) up to 7.5 mtrs from earth electrode , including, earthing plate shall be surrounded by alternative layers 15cm thick of charcoal and common all around bottom and top , necessary earth work and excavation in soft/loose soil , form work, GI medium grade 20mm bore watering pipe (ISI Marked) with funnel and wire mesh, 40mm thick chamber made with PCC 1:2:4 type B1 ,cover slab made with RCC 1:2:4 type B1 Design mix ,edges covered with and including 40mm x 40mm x 6 mm angle iron frame duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer with and including 8mm dia TMT bars at 75mm c/c both ways with MS Hook of 12mm dia MS bars, etc , all as specified and directed by Engineer-In-charge. Note : (i)Earth continuity conductor including protection pipe up to 7.5 mtrs from earth electrode will be included in unit rate, complete all as specified and directed. (ii) The rate of earth work in soft/loose soil i.e. excavation, returing filling and removal, form work is included in this item and nothing shall be paid extra on this account. Note:- (i) Earth continuity of galvanized iron strip 25mm x 4 mm including protection pipe up to 7.5 mtrs from earth electrode will be included in unit rate, complete all as specified and directed. (ii) The rate of earth work in soft/loose soil i.e. excavation, returing filling and removal, form work is included in this item and nothing shall be paid extra on this account. (iii) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (iv) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge.

Material and Labour in replacement for earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6 mm thick burried directly in ground to depth of pit not less than 2.25 m below normal ground level with top edge of the plate not less than 1.5 m below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal / coal dust and common salt filling in alternate layers and connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of GI or steel including GI protection pipe 15mm dia light grade upto the extent of 7.5 metre and connecting to earthing test point, main switch board including GI pipe 20 mm dia medium grade for watering, MS funnel and bringing out the watering pipe upto 30 cm above the normal ground level plugged at top including all fitting including PCC earth pit with PCC 1:2:4 type B-1 using 20mm graded stone aggregate and RCC pit cover including necessary earthwork and excavation in any type of soil complete all as specified as shown in electrical plate No 3 of SSR Part-I and testing on completion. Note:- (i) Earth continuity of GI wire 4 mm including protection pipe up to 7.5 mtrs from earth electrode will be included in unit rate, complete all as specified and directed. (ii) The rate of earth work in soft/loose soil i.e. excavation, returing filling and removal, form work is included in this item and nothing shall be paid extra on this account. (iii) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (iv) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge.

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender from total amount of Schedule 'A'/BOQ

Please Enable Macros to View BoQ information