REPAIR/MAINT/REPLACEMENT OF OLD UNSV STREET LIGHT, FLOOD LIGHTS, HIGH MAST LIGHT, GATE LIGHT, FOCUS LIGHT, GARDEN LIGHT AND MISC E/M WORKS OF CEILING FAN, EXHAUST FAN, WALL MOUNTED FAN, RO PLANT AT VARIOUS LOCATIONS OF AGE E/M HOSP UNDER GE E/M LKO

Amount

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables, pipes etc. and getting out including trimming the sides and forming bottom surfaces to required levels in soft/loose soil complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified and directed by Engineer-in-Charge.

Removing excavated material ( soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge.

Material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete all as specified and directed by Engineer-in-Charge. Note :- Punned thickness shall only be considered for payment

M&L laying well burnt old size bricks, sub class "B" bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection complete all as specified and directed by Engineer-in-Charge.

Boring/Drilling ( horizontally) manually under existing road ( maximum 10 M in width) suitable for passing GI tubing of 40 to 80 mm bore complete all as specified and directed by Engineer-in-Charge.

S & F GI tubing 'Light' grade 40 MM for cable protection fixed in poles/walls/laid under roads/crossing etc incl taking out the rusted pipes of following sizes, complete all as specified and directed by Engineer-in-Charge.

All as per item No 7 above but size 50 mm bore dia

Laboure for taking out and Laying only ( in replacement) , jointing and testing LT under ground electric power cable crossed linked polyethylene ( XLPE) insulated, galvanised steel strip or wire armoured, ISI-7098 Marked, with aluminium conductor multi stranded , heavy duty 1100 Volts grade of size 10 sqmm cross sectional area, 2 core,c omplete all as specified laid in trenches/ laid under floor or fixed naked with walls / on poles/ in ducts /in GI pipes etc. with and including MS Clamps, nuts , bolts, washers complete all as specified and directed by Engineer-in-Charge. Note :- Excavation, earth work, sand cushioning, protection bricks/ tiles/ block and pipe shall be measured and paid separately under appropriate items.

All as per item No 9 above but of size 10 Sqmm 4 core.

All as per item No 9 above but of size 25 Sqmm 3.5 core.

Supplying and fixing in repair flat twin core ,2.5 sqmm nominal cross sectional area multistranded aluminium conductor cable, over all PVC sheathed, 1100 Volts grade heavy duty cable PVC insulated and PVC sheathed complete all as specified and directed by Engineer-in-Charge.

M & L for taking down and Supplying, transporting, erecting and fixing Steel tubular swaged poles type 410 SP-31 ( 9.0 metres long) complete with cast iron base plate, finial, taper plug, bolts, nuts and screws as specified, including necessary excavation and earth work , PCC 1:4:8 type D2 in foundations below pole, PCC 1:3:6 type C2 around poles and PCC 1:3:6 type C1 as in plinth block , disposal of surplus soil to a distance not exceeding 50 m and depositing where directed, painting steel tubular poles exposed surafces with Aluminium paint two coats over one coat of red oxide primer and providing 300 mm wide bands (3 bands/ straps with synthetic enamel paint and 2 bands with Black bituminous paint ) from plinth block and numbering of poles , painting embedded portion of poles with one coat of bituminous paint complete all as specified and directed by Engineer-in-Charge. Note - Old pole will be deposited in MES store yard

Dismantling and removing existing unsv street light/ flood light MH/HPSV fittings of any type and any capacity from street light poles any hieght and high mast light pole after disconnecteing of electrical connection complete all as specified and directed by Engineer-in-Charge.

Supply, fixing, connecting and testing energy saving LED street light fittings 35 Watt with thermal management, potted driver, pressure die cast housing LM 6 alloy/anti dust exposed lens, in built tilt angle arrangement and environment friendly long life with IP66 protection on existing street light poles and bracket complete all as specified and directed by Engineer-in-Charge.

Supply, fixing, connecting and testing energy saving LED street light fittings 45 Watt with thermal management, potted driver, pressure die cast housing LM 6 alloy/anti dust exposed lens, in built tilt angle arrangement and environment friendly long life with IP66 protection on existing street light poles and bracket complete all as specified and directed by Engineer-in-Charge.

Supply, fixing, connecting and testing energy saving LED street light fittings of 60 Watt with thermal management, potted driver, pressure die cast housing LM 6 alloy/anti dust exposed lens, in built tilt angle arrangement and environment friendly long life with IP66 protection on existing street light poles and bracket complete all as specified and directed by Engineer-in-Charge.

Supply, fixing, connecting and testing energy saving LED street light fittings of 90 Watt with thermal management, potted driver, pressure die cast housing LM 6 alloy/anti dust exposed lens, in built tilt angle arrangement and environment friendly long life with IP66 protection on existing street light poles and bracket complete all as specified and directed by Engineer-in-Charge.

Supply, fixing, connecting and testing energy efficient LED flood light fittings of 120 Watt pressure die cast aluminium housing and IP66 protection complete all as specified and directed by Engineer-in-Charge.

Supply, fixing, connecting and testing energy efficient LED flood light fittings of 150 Watt pressure die cast aluminium housing and IP66 protection complete all as specified and directed by Engineer-in-Charge.

Supply, fixing, connecting and testing energy efficient LED flood light fittings of 200 Watt pressure die cast aluminium housing and IP66 protection complete all as specified and directed by Engineer-in-Charge.

Supply, fixing, connecting and testing energy efficient LED flood light fittings of 135 Watt pressure die cast aluminium housing and IP66 protection complete all as specified and directed by Engineer-in-Charge.

Fixing only connecting and testing energy efficient LED flood light fittings of 250 Watt pressure die cast aluminium housing and IP66 protection including complete all as specified and directed by Engineer-in-Charge. Note- Mtrl will be issued for free fixing.

Supply and fixing (in repairs) Integral LED post top lanterns fitting black ABS plastic spigot, spun aluminium canopy, with opal diffuser and accessories suitable for 1x25 W CFL including making connections complete all as specified and directed by Engineer-in-Charge. Make- Havells Philips/Bajaj/CG.

Supply and fixing (in repairs) Integral dome type white coloure plastic boty of size 300 mm suitable for fixing on 80 mm pipe post top lanterns including suitable for 1x25 W CFL including making connections complete all as specified and directed by Engineer-in-Charge. Make- Havells Philips/Bajaj/CG.

Supply, (in repairs) fixing, connecting and testing energy efficient LED blolard light of 18 Watt including foundation work with PCC as required complete all as specified and directed by Engineer-in-Charge. Make philips Cat part No BCP150LED150/WWPSU220-240V 7043

M& L for fabrication and fixing canopy headed junction box suitable for LT Pole made out 3.15 mm MS sheet of size 30x25x15 cm with cover ,04 nos aluminium bus bar of size 25x3 mm for phase and neutral 01 nos 06 Amps MCB SP mounting channel for control street light cable gland aluminium lug MS FIixing clamp -02 nos with nut bolt washer painting with two coat of synthectic enamel paint over a coat of red oxide primer on external and internal surface complete all as specified and directed by Engineer-in-Charge.

S&F in replacement GI bracket for street light fittings fabricated with GI tubing 40mm dia 'light grade' 1.5m long and bending to angle of 120 degree including mild steel clamp of suitable size with two coat aluminium paint suitable for fixing on PCC/steel poles complete all as specified and directed by Engineer-in-Charge.

S & F cast AL heavy pole designer leg and broader designer base finisged with stove enemled paint daimeter of one leg is 76 mm and total lenght of the pole inliding base and legs with base plter X04 nos legs a IS 3100 mm (10 Feet 2 inches ) with PCC works complete all as specified and directed by Engineer-in-Charge.

S & F fully cast al with hexagonal junction box max projection breadth of 950 mm sutable for 02 nos post top lanternes for 02 metre and 2.5 metre pole complete all as specified and directed by Engineer-in-Charge.

S & F fully cast al with hexagonal junction box max projection breadth of 625 mm sutable for 02 nos post top lanternes for 02 metre and 2.5 metre pole complete all as specified and directed by Engineer-in-Charge.

S & F fully cast a body finished with stove enemled paint with acryclic cover total length 915 mm and width 315 mm with b22 brass holder and lamp complete all as specified and directed by Engineer-in-Charge. MAKE - Mepro , PTL 1500

S & F PVC cable 3 core 4 Sqmm from fitting to panel box complete all as specified and directed by Engineer-in-Charge.

M&L point wiring for one light/fan point controlled by one way switch by using 1.5 Sq mm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including PVC concealed conduits and conduit accessories/fittings, pressed steel terminal switch boxes, 3 mm thick Bakelite sheet top cover (ISI Marked) fitted with Chromium plate brass screws washers and 1.5 Sq mm nominal cross sectional area multistranded copper conductor green PVC insulated unsheathed earth wire and connecting to earth dolly and make wall surfce as existing same colour complete all as specified and directed by Engineer-in-Charge. Make of PVC insulated unsheathed FRLS copper cable Finolex/Havells/POLYCAB .

S&F Polycarbonate switch piano flush type, SP,5/6 Amps, one way complete all as specified and directed by Engineer-in-Charge.

M&L ceiling rose, Pilot 3 Plate ceiling rose 6A, complete all as specified and directed by Engineer-in-Charge.

S&F (in repairs) Ceiling fan regulator electronic type deluxe 240 , 5 step , Volts ISI Marked complete all as specified and directed by Engineer-in-Charge.

Disconnecting of ceiling fans of 1200 mm sweep from ceiling rose/connector for cleaning,servicing /oiling and greasing of fan by using appropriate grade of oil/grease and replacing defective parts such as bush bearing , split pin rubber bush, capacitor etc and rehanging the same after proper cleaning and making connection with ceiling fan/connector with flexible wire of size 23/0076 copper conductor multi stranded and refixing same in original position complete all as specified and directed by Engineer-in-Charge. (NOTE :- Parts/component will measuared and paid separtely under respective item of the schedules).

Rewinding of ceiling fan 1200 mm sweep AC 230 volts single phase with super enamelled copper winding wire of appropriate/existing gauge/size including packing, insulating material soldering varnishing, assembling and testing including transportation charges to and fro from contractor's workshop complete all as specified and directed by Engineer-in-Charge.

All as per item No 39 above but 1400 mm sweep.

S&F bearing of ceiling fans for ceiling fans of 1200/1400mm sweep to suit for different makes of fans of approved quality including necessary greasing complete all as specified and directed by Engineer-in-Charge. Make- NBC/SKF/NORE.

S&F bushes gun metal suitable for ceiling fans 1200/1400 mm sweep complete all as specified and directed by Engineer-in-Charge.

S&F Rubber bushes suitable for ceiling fans 1200/1400mm sweep complete all as specified and directed by Engineer-in-Charge.

S&F split pin suitable for ceiling fans 1200/1400mm sweep complete all as specified and directed by Engineer-in-Charge.

S&F condenser/capacitor suitable for 230 volts single phase ceiling fan 1200mm /1400 sweep of any make and quality of capacity 2.5 MFD complete all as specified and directed by Engineer-in-Charge. Make- Bajaj/Seimen/Tibcon/Usha.

All as per item No 45 above but 3.15 MFD.

Painting of ceiling fan 1200/1400mm sweep AC 230 volts single phase complete in situ or at contractor workshop with synthetic enamelled white/matching paint by spraying one cost including filling of cavities after cleaning all dust and marking SM/MES NO with black enamelled paint complete all as specified and directed by Engineer-in-Charge.

S & F ceiling fan 1200 mm sweep AC 230 volts single phase including making connection with three core PVC insulated 1100 volts grade multi stranded copper wire of appropriate size including testing complete all as specified and directed by Engineer-in-Charge.

Taking down and transporting to work shop for Rewinding of exhaust fan 300mm to 450mm sweep AC 230 volts single phase with super enamelled copper wire of appropriate size including packing insulating material, soldering, varnishing, assembling and testing including transportation charges to and fro from contractor's workshop complete all as specified and directed by Engineer-in-Charge.

S&F condenser/capacitor suitable for 230 volts single phase exhaust fan 300mm to 450 sweep of any make and quality of capacity 4 MFD complete all as specified and directed by Engineer-in-Charge. Make- Bajaj/Seimen/Tibcon/Usha.

S&F exhaust fan frame made out of MS sheet for any make and size of exhaust fan with suitable size of nuts, bolts lugs and washers complete all as specified and directed by Engineer-in-Charge.

Painting of exhaust fan 300 to 450 mm sweep AC 230 volts single phase complete with synthetic enamelled white/grey/matching paint by spraying one coat including filling of cavities after cleaning all dust and marking SM/MES NO with black enamelled paint complete all as specified and directed by Engineer-in-Charge.

Supply & fixing exhaust fan 300 mm sweep AC 230 volts single phase with louvers including making connection with three core PVC insulated 1100 volts grade multi stranded copper wire of appropriate size including testing complete all as specified and directed by Engineer-in-Charge. Make: Bajaj/CG

Supply & fixing exhaust fan 380 mm sweep AC 230 volts single phase with louvers including making connection with three core PVC insulated 1100 volts grade multi stranded copper wire of appropriate size including testing complete all as specified and directed by Engineer-in-Charge. Make: Bajaj/CG

Supply & fixing exhaust fan 450 mm sweep AC 230 volts single phase with louvers including making connection with three core PVC insulated 1100 volts grade multi stranded copper wire of appropriate size including testing complete all as specified and directed by Engineer-in-Charge. Make: Bajaj/CG

Supply & fixing exhaust fan fresh air 250 mm sweep AC 230 volts single phase with louvers including making connection with three core PVC insulated 1100 volts grade multi stranded copper wire of appropriate size including testing complete all as specified and directed by Engineer-in-Charge. Make: Bajaj/CG

Taking down and transporting to work shop for Rewinding for Rewinding of wall fan 450mm sweep AC 230 volts single phase with super enamelled copper wire of appropriate size including packing insulating material, soldering, varnishing, assembling and testing including transportation charges to and fro from contractor's workshop complete all as specified and directed by Engineer-in-Charge.

Fixing air circulator fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting including making necessary electrical connection with ceiling rose complete all as specified and directed by Engineer-in-Charge. Note- Mtrl have issued by department for free fixing only.

Fixing only Voltage stabilizer for automatic operation single phase & Itelligent Time Delay System, Compatible with Regular & Inverter ACs, Wall Mounting Cabinet Design, Energy efficient design, smart Digital Display, Built In Thermal Overload Protection, Low & High Voltage Cut-off Protection, Latest IC Technology of capicity 04 KVA complete all as specified and directed by Engineer-in-Charge. Note- Mtrl have issued by department for free fixing only.

M/S AMARJIT SINGH