SPECIAL REPAIR TO BLDG NO TWG/189 AND TWG/190 OF ARTY UNIT AT CHUJE GG UNDER AGE (I) TAWANG

Amount

Dismantling plain or corrugated steel sheeting any thickness, any gauge, thickness, including nainital or similar roof covering complete all as specified and directed

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directedspecified.

Taking down chowkets or frame with shutter (without taking off shutters from the frame) n.exe 1.5 sqm each complete all as specified and directed

Taking down chowkhats or frame with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed

Dismantaling timber scantling 40 Sq cm as in unframed work and over in sec in any position complete all as specified and directed

M&L Second class hard wood clean swan timber framed work as in scantling complete all as specified and directed

S&F Second class hard wood plain, solid, straight chowkhats and frame, wrought, framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed

S&F 35mm thick 2nd class hard wood plain,framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed

S&F 30mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepaid to receive glass gauze etc, divieded into squares (with sash bar), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for secuering glass etc size of members of shutter as specified in SSR part-I, sec 8 clause 8.24(a) all as specified and directed.

S&F 100 mm long butt hinges medium grade cold rollled mild steel and fixed.

S&F Aluminium anodised barrel tower bolts 150 mm of extruded section and fixed.

S&F 150 mm long aluminium handles cast type anodised.

S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed

S&F 75 mm long butt hinges medium grade cold rollled mild steel and fixed complete all as specified and directed

S&F Aluminium anodised barrel tower bolts 125 mm of extruded section and fixed complete all as specified and directed

S&F 125 mm long aluminium handles cast type anodised complete all as specified and directed

M&L 3 mm thick shet glass, ordinary quality and glazing with oil puty or wooden beads/PVC beads in square n exc 0.5 sqm in each pane complete all as specified and directed

Dismantling of wall and celling boards (fibre, pulp, insulation, etc) or insulation board/slabs/blankets. in any thickness incl cover fillets complete all as specified and directed

Dismantling boarding any description/ thickness fixed in any position with nails.

M&L Second class hard wood clean sawan boarding, 50 mm thick, with butt joints ln any situation fixed with nails complete all as specified and directed

M&L for 6mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work in wall only

Supply and Fix 4mm thick Plywood, grade BWR, type BB, fixed with nails to timber framework as in ceiling etc complete all as specified and directed.

M&L for second class hard wood plain fillets, square, rectangular or triangular in section, wrought secured with nails of sectional area exc 3 Sqcm and n.exc 6 Sqcm complete all as specified and directed

M&L for applying two coat of synthetic enamel paint over a coat of pink primer on wood/plywood surfaces, over 10cm width or girth complete all as specified and directed

Demolition of concrete in ground floor and pavings nexc 15cm thickness including floor finishes like tiles if any of any description. (below or above ground level) complete all as specified and directed

M&L for 75 mm 1:3:6 type C2 ( using 40 mm graded stone aggregate) as plinth protection./paving/footpath complete all as specified and directed

M&L 25 mm thick PCC (1:2:4) type B-1 (20mm graded aggregate) as in sub base finishing the surface even and rough to receive the topping layer complete all as specified and directed

M&L screed bed or bedding layer of mortar (1:4) 15 mm thick for laying floor finishers complete all as specified and directed

M&L vitrified tiles light shade 10mm thick (square /retangular) area of each tiles not exc 0.36 sqm in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

Material and labour for Roof trusses (framed) trussed ,purlins ,crane gantries,rails and fastenings and heavy bracket framings (beam,tee,angle ,channel,or flat sections ) including distant pieces cheats etcs complete all as specified and directed

M&L for Preparation of old steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for Preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description in ground floor and pavings n.exc 15 cm thickness (below or above ground level), complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in Beams, cantilevers, bressummers, lintels complete all as specified and directed. (Note: Steel reinforcement shall be measured & paid separately)

Material and labour for Form work to faces of sides and soffits of floor or roof beams, cantilevers, shelves including supports, overhangs, drain, etc for rough finished flat surfaces of concrete complete all as specified and directed.

S&F for TMT bars 10mm dia and over, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed.

S&F for TMT bars 8 to 10 mm dia in stirrups, spacers and binders, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hoopingfor columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed.

Demolition of precast concrete block/stone boulder walling built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed.

M&L for pre cast cement concrete block 1:3:6 type C1 (using 20mm graded stone agg) 10 cm thick or width and setting in CM 1:6 complete all as specified and directed.

M&L for pre cast cement concrete block or slabs 1:3:6 type C1 (using 20mm graded stone agg) 10 cm thick (with plain or interlocking joints as directed ) width and setting in CM 1:6 complete all as specified and directed.

Material and labour for rendering 15mm thick cement plaster in cement mortar (1:6) on unfair faces of brickworks complete all as specified and directed.

M&L for applying two coats of distemper on new plastered wall surfaces of any description over a coat of primer including preparation of plastered surfaces complete all as specified and directed.

Plain Cement Concrete (1:3:6) type C-1, using 20mm graded stone aggregate as in surface channel and drain complete all as specified and as directed.

Materials and Labour for Extra for forming fair finishing to surfaces drain/channel 30 cm inner girth in cement concrete ,using extra cement incl forms, moulds etc complete all as specified and directed.

M & L for wall of random rubble, uncoursed as in items 06002, built in CM 1:4 complete all as specified and directed

Hardcore of Broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder,ceiling roses, regulators, switch socket outlet, bulk head fittings, casing caping,and conduit, tube light fittings etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors etc complete all as specified and directed by engineer-in-charge.

Taking down carefully by unscrewing from board/outlet boxes, fittings and fixture such as main switches & DBs of any size and any capacity complete all as specified and as directed by engineer-in-charge.

M/L for point wiring with 2 single core FRLS PVC insulated, unsheathed stranded copper conductor of size 1.5 sqmm in and including suitable size PVC casing & caping with pvc surface boxes for light/fan/socket controlled by one switch complet with 1.5 sqmm PVC insulated unsheathed multistandard copper conductor 1100 volts grade green colour for earth continuity complete all a specified and as directed by engineer-in-charge.

All as per item No 51 here-in-before but for one 5 Amp socket outlet independent board complete all as specified and as directed by engineer-in-charge.

All as per item No 51 here-in-before but for one 5 Amp socket outlet on the same board complete all as specified and directed by engineer-in-charge.

All as per item Ser No 51 above but for one 15 Amp socket outlet independent with 2 run of cable of size 4 sq mm and one run of 4 sq mm cable as earth continuity complite all as specified and as directed by engineer-in-charge.

Supply and fixing switch piano flush type single pole one way 5 Amp 240 volts all as specified and as directed by engineer-in-charge.

Supply and fixing for switch socket combination 2 in 1 , 5 pin 5 Amps flush type 240 volts all as specified and directed by engineer-in-charge.

Supply and fixing for switch socket combination multipurpose 15 A flush type, 5 in 1 240 volts all as specified and directed

S&F 20Amp 240V single pole and neutral encolsure with a two pin and earth plug with socket complete with Single pole MCB complite all as specified and directed as by engineer-in-charge.

S&F for ceiliing rose three terminal surface type bakelite 65x50 mm complite all as specified and as directed by engineer-in-charge.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, ccomplete. all as specified and directed by as engineer-in-charge.

S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for battern fittings complete. all as specified and directed by as engineer-in-charge.

S&F LED Bulb 9 watt cat part no LED ADORE 9W B22 WW 2 STAR LAMP complete all as specified and as directed by engineer-in-charge.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed by engineer-in-charge.

S&F MCB distrubution board SPN 8way double door, sheet steel,phosphatised,powder coated with 200 amps bus-bar,neutral link,earth bar and din rail 240 V ,complete all as specified and directed. by engineer-in-charge.

2x1.5 sq. mm + 1x1.5 sq. mm earth wireWiring for circuit/submainwiring alongwith earthwire with the followingsizes of FR is PVC insulated copper conductor, single core cable in surface/ recessed as required complite all as specified and directed by Engr-in-Charge.

Supply and Fixing MCB SPN 240V 40 Amps,10 KA complete all as specified and directed. by engineer-in-charge.

Supply and Fixing only MCB SP, 240V,6 to 32 Amps,10 KA complete all as specified and directed. by engineer-in-charge.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 2 core 10 sq. mm nominal cross section in service connections specified and as directed by engineer-in-charge.

M&L House service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Med. grade, two nos90 bends. M.S. hook and stay or guy complite all a specified and as directed by engineer-in-charge.

M&L for earthing complete with galvanised steel earth plate electrode 60cmX60cmX6mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level)with top edge of the plate not less than 1.5 metres below normal groundlevel, connected to galvanised earth lead 4 mm by means of volts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No-5 of SSR Part-I connected to earthing test point all as specified or indicated including excavation and connected earth work in hard/dense soil, PCC 1:3:6 type C-1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 15 mm bore GI medium grade earth lead protection pipe, 50 mm thick RCC 1:2:4 type B-1 cover slab of earth pit reinforced with 8 mm dia TMT bars @ 10 cm C/C both ways and with handle made out of 10 mm dia bars, funnel, strainer,charcoal and testing on completion all as specified and directed.by engr-in-charge.

M/S K D CONSTRUCTION

M/S L N BUILDERS

M/S L.N. TRADERS

M/S N T BROTHERS

M/S RINCHIN DORJEE CONSTRUCTION

MS TD CONSTRUCTION

TENZIN CONSTRUCTION