Re-construction of damaged boundary wall of Nursery towards PGIMS (back side temple) and raising of boundary wall towards south, west and west side of Nursery in MDU, Rohtak

Amount

Dismantling brick work, tile masonry or tile lining and tile terracing. In cement

Earth work in excavation in foundations, trenches, etc. in all kinds of soils, not exceeding 2 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15 cm layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 metres. Rate to be quoted in P.Cum instead of P.100 Cum.

Dismantling concrete cement concrete plain 1:4:8

Cement Concrete 1:4:8 with stone aggregate 40mm nominal size in foundation and plinth

Cement concrete 1:1 ½:3 with stone aggregate 20mm nominal size for reinforced concrete work in footing,strip,foundation,beam,rafts,pedestals nd approach slabs of bridges etcexcluding steelb reinforcement and including centring &shuttering laid in position complete in all respects(for work upto 1.5 metre below ground level).

Cement concrete 1:1 ½:3 with stone aggregate 20mm nominal size for reinformced concrete work for walls exceeding 20cm thickness (straight & curved) beams, girders, stairs, clumns (Square or rectangular) battens and lintels etc. excluding steel reinforcement but including centring and shuttering laid in position complete in all respects.

Cold twisted deformed (ribbed/tor steel ) bars for RCC works where not included in the complete rate of RCC including bending binding and placing in position complete.

First class brick work laid in cement sand mortar 1:4 in first storey upto 4 meters above plinth level.

Damp proof course 25 mm thick of cement concrete 1:2:4 using stone aggregate with 2 costs of bitumen 20/30 penetration at 1.65 Kg. per sqm laid hot and sanded.

Wrought iron and mild steel ( using angles, flats, square bars, tee and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position

Cement concrete 1:2:4 with stone aggregate 20mm nominal size in first storey upto 4 mtr. Above plinth level.

Scraping Cement plaster

15 mm thick cement plaster 1:3

20 mm thick cement plaster damp proof course 1:3 with 2 coats of bitumen at 1.65 kg per sqm laid hot and sanded:- (a) vertical

Applying priming coat with ready mixed exterior paint in all shades on newly plasterd or concrete exterior surface.

Providing two coats of exterior acrylic emulsion paint (1st Quality) complete in all respect as approved by Engineer-in- charge Make:- Top quality of Asian/Nerolac

Applying Priming coat with metal primar on new steel or iron work including preparation of surface. Painting two coats excluding priming coat with synthetic enamel paint in all shade on new wood work or metallicor plastered or concrete surface to give and even shade

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) DSR. 16.53

Pawan Kumar