GE (AF) AWA-04/2021-22

Amount

Demolition of cement concrete (un reinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) and removing rubbish debris outisde MOD land, complete all as specified and directed.

Plain cement concrete, (1:2:4), type B-0 using 12.5mm graded crushed stone aggregate, 25mm thick, surface finished fair to receive top layer of flooring, complete all as specified and directed.

Plain cement concrete, (1:2:4) type B-1, using 12.5mm graded crushed stone aggregate, 40mm thick, as in floors, finishing surfaces even and smooth without using extra cement, complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone work etc. including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Brick work with old size bricks having crushing strength not less than 75Kg/Sqcm, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6), complete all as specified and directed.

Rendering 15mm thick on brick work or concrete surface in cement mortar (1:6), finished even and smooth without using extra cement, complete all as specified and as directed.

Preparation of newly plastered oil emulsion surfaces of walls and applying two coats of distemper over a coat of primer , complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) including screed bed layer, and rubbish off the premises, complete all as specified and directed.

Vitrified ceramic tiles Ist quality 9 to 10mm thick (square/ rectangular), area of each tile not exceeding 0.36sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, including 15mm thick screed bed or bedding layer in cement mortar (1:6), complete all as specified and directed.

Vitrified ceramic coloured tiles Ist quality 9 to 10mm thick (square/ rectangular), area of each tile not exceeding 0.36sqm as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, including 10mm thick rendering on brick/concrete surface in cement mortar (1:3), complete all as specified and directed.

Non skid ceramic coloured/printed tiles (premium quility) 7 to 8mm thick, (square/ rectangular), area of each tile exceeding 0.11sqm, but not exceeding 0.18sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6), complete all as specified and directed.

Glazed ceramic coloured/printed tiles of size 450mm x 350mm x 6 to 7mm thick, on vertical surface such as skirting/dado etc set & jointed in cement slurry and pointed with white or coloured cement to match the colour tiles including 10mm thick rendering on brick/concrete surface in cement mortor (1:3) , complete all as specified and directed.

18-20mm thick granite stone (slab) of any colour and type, (table rubbed and polished) work, as in floors/ vertical surfaces, cooking platforms and like, set and jointed in neat cement slurry including pointing in white cement with admixture of pigment to match with shade of granite, complete laid over and including 15mm thick screed bed or bedding layer in cement mortor (1:4), complete all specified and directed.

Rounding to edges of stone slabs one edge, such as in steps,cooking platform and other similar situations, complete all as specified and directed.

Taking down chowkhats or frames not exceeding 1.50 sq.m with shutters (without taking off shutters from the frames) and making good disturbed portion), complete all as specified and directed.

Taking down chowkhats or frames exceeding 1.50 sq.m and not exceeding 4.0 Sq.m with shutters (without taking off shutters from the frames) and making good disturbed portion), complete all as specified and directed.

Solid PVC Door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube 19mm, supplying & fixing in opening as per specification and drawing, complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of 5mm thick plain coloured PVC sheet to be fitted in the mild steel frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site), complete all as specified and directed.

Aluminium, alloy handles, cast type, anodised of size 150mm, all as specified and directed.

Butt hinges, medium weight, cold rolled, mild steel, 100mm long, complete all as specified and directed.

Aluminium anodised (ISI marked), barrel tower bolts of extruded section, length of bolt 150mm, complete all as specified and directed.

Dismantling PVC water storage tanks of capacity exc 250 litres but not exc 500 litres, complete all as specified and directed.

Rotational moulded polyethylene water storage tank (double layer ISI marked) 500 Litres capacity (Cylinderical vertical with closed top) hoisted and fixed in position with necessary fitting/fixtures for connecting tank including PVC float valve 20mm dia with polythene float, nipples, check nuts and washers etc. complete and making connections with existing water supply line, complete all as specified and directed.

Ball brass valve ,high pressure with polythene float and flynut complete screwed for iron pipe or ferrule, 15mm bore, fixed in repairs, complete all as specified and directed

Dismantling PVC water storage tanks of capacity exc 500 litres but not exc 1000 litres, complete all as specified and directed.

Rotational moulded polyethylene water storage tank (double layer ISI marked) 1000 Litres capacity (Cylinderical vertical with closed top) hoisted and fixed in position with necessary fitting/fixtures for connecting tank including PVC float valve 20mm dia with polythene float, nipples, check nuts and washers etc. complete and making connections with existing water supply line, all as specified and directed.

Ball brass valve ,high pressure with polythene float and flynut complete screwed for iron pipe or ferrule, 20mm bore, fixed in repairs, complete all as specified and directed

Taking up or down steel water tubing and connection of size 15mm dia including cleaning for refixing as required, complete all as specified and directed.

Mild steel galvanised iron medium grade water tubing 15mm bore (ISI marked) with screwed & socket joints, with all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. fixed to wall and ceiling or laid under floors/concealed in wall, complete all as specified and directed.

Description all as per Serial Item No. 29 here-in-before, but except tubing (15mm bore), but including GI fittings as required, complete all as specified and directed. Note:- Servicable GI pipe retreived from Serial Item No. 28 here-in-before shall be reused under this item.

Cutting chases, pinning for concealed water tubing and making good to facing where required and pointing in cement mortar 1:3, cutting exc 10cm but not exc 20cm girth, complete all as specified and directed.

Taking up or down steel water tubing and connection of size 20mm dia including cleaning for refixing as required, complete all as specified and directed.

Mild steel galvanised iron medium grade water tubing 20mm bore with screwed and socket joints, with all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. fixed to wall and ceiling or laid under floors, complete all as specified and directed.

Description all as per Serial Item No. 33 here-in-before, but except tubing (20mm bore), but including GI fittings as required, complete all as specified and as directed. Note:- Servicable GI pipe retreived from Serial Item No. 32 here-in-before shall be reused under this item.

PVC valveless syphonic action type low level flushing cistern white, 10 litres capacity including inlet, ball valve, float, PVC connection 450mm long including brackets and 32mm dia flush pipe, fixed in repairs, complete all as specified and directed.

15mm dia, 450mm long, PVC connection with brass nut and washer, fixed in repair, complete all as specified and directed.

15mm dia, 600mm long, PVC connection with brass nut and washer, fixed in repair, complete all as specified and directed.

Bib taps, 15mm bore, cast copper alloy, chromium Plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair, complete all as specified and directed.

Stop valve, 15mm bore ,cast copper alloy, chromium plated, fancy type, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repair, complete all specified and directed.

Central hole wash hand basin mixer, 15mm bore, brass chromium plated for hot and cold water, fixed in repair, complete all as specified and directed.

Shower rose, brass chromium plated , 125mm size, with or without swivel joint, suitable for 15mm bore pipe and fixed to pipe as in repair, complete all as specified and directed.

Brass chromium plated toilet paper holder, fixed in repair, complete all as specified and directed.

Glass shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms), fixed in repair, complete all as specified and directed.

CP grating doom 100mm dia with waste hole of PTMT as suitable to existing trap , fixed in repairs, complete all as specified and directed.

Brass chromium soap dish holder (CAT NO CAN-1131N), fixed in repair, complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pattern) coloured with trap (excluding flushing cistern and flush pipe) and making connection to drain and to flushing pipe etc., including plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated jet device and PVC connection of suitable length including removing old WC of any description and provision of plain cement concrete (1:2:4) nominal mix, type B-I, using 20mm graded crushed stone aggregate, fixed in repairs, complete all as specified and directed.

Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580mm x 440mm, crystal white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete (1:2:4) nominal mix, type B-I using 20mm graded crushed stone aggregate, complete all as directed including making connections to trap and to flush pipe, etc and making good to floors to match existing, fixed in repair, all as specified and directed.

Wash hand basins, Vitreous China (oval type, coloured) size 550mmx400mm, excluding tap etc including brackets with 32 mm bore waste fittings, brass, chromium plated with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, PVC connections 15mm size with CP brass coupling nuts of length 450mm, trap, grating and Union for discharge pipe, waste, chain and plug and porcelain stopper,chain and plug, PVC 32mm dia waste pipe and all accessories, fixed in repair complete all as specified and directed. Make: Cat Part No. 1008 of Cera or equivalent makes approved by GE as mentioned in Appx 'C'

Brass chromium plated bottle traps for wash hand basins with inlet and outlet screwed for pipe or connections including necessary packing,union and cap , complete all as specified and directed.

Note :- An amount of Rs. 15,150.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.

FG CONSTRUCTION

nazir Ahmad Dar and sons

M/S BASHIR AHMAD AND SONS

M/S GEE EMM MIR