Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.9 LAccepted-AOC | ₹21.9 L | L1 | Accepted-AOC Lowest Bidder |
| 2 | L2₹25.7 L+₹3.8 L (17.3%)Rejected-Finance | ₹25.7 L+₹3.8 L (17.3%) | L2 | Rejected-Finance Not Being L1 |
| 3 | Rejected-Technical 25 AZAD CHOWK SADAR BAZAR JABALPUR 482001 | JABALPUR | JABALPUR | MADHYA PRADESH | 482001 | - | - | Rejected-Technical Not admitted due to not uploading of Enlistment letter, GST, EPF after given the sohrt fall of documents. |
| Sl No | Description | Qty | Unit | M/S Malik Construction Corporation L2 | R.P Builders L1 |
|---|---|---|---|---|---|
| 1.00Note: (i) The contractor or his authorized representative shall report daily to the Complaint Cell for collection of complaints and The contractor shall be required to attend complaints as and when intimated by the department through complaint slip , VYNUS , telephone or any otherauthorised means of communication .If it is not possible to rectify the same within timeline specified below, the matter along with detailed reasons shall immediately be brought to the notice of the Engineer-in-Charge by the contractor or his representative. If the Engineer-in-Charge is satisfied with the justification furnished, no recovery shall be effected on this account. (ii) (a) All No Light / Power Supply complaints shall be attended to and rectified within 01 hour, commencing from the date and time of issue/intimation of the complaint. Failure to attend the complaint within the stipulated period shall attract a penalty of Rs. 120/- for delay up to 04 hours and Rs. 240/- for delay beyond 04 hours, which shall be recovered from the contractor's dues. (b) All other routine maintenance complaints covered under the contract shall be attended to and rectified within 24 hours, commencing from the date and time of issue/intimation of the complaint. In case the complaint is not rectified within the stipulated period, a penalty of Rs. 120/- per complaint per day or part thereof shall be recovered from the contractor's dues.. However, labour charges for items covered under “M&L”, “S&F”, and “In Repair” shall be deemed to be included in the respective quoted rates. (iii) Items under this contract are of day-to-day nature and the complete scope/site cannot be forecast or handed over to the contractor at one time. The contractor shall therefore arrange adequate manpower, materials, and resources as per site requirements. In case the contractor fails to provide the required skilled labour in accordance with the contract provisions, suitable recoveries/penalties shall be levied as applicable. | |||||
| 1.01(iv) In addition to the above, the contractor shall arrange and maintain all necessary T&P required for execution of the work, such as die sets (1/2" to 1") washers of all sizes, safeda, thread(soot) , M-seal, screws, nails, plugs, grease, putty, welding rods, portable welding machine, drilling machine with bits and the like, including necessary form work, scaffolding and safety measures complete to make the system functional and leak proof including necessary safety measures, complete all as specified and directed by the Engineer-in-Charge. (v) The cost of all the above arrangements, obligations, T&P, consumables, labour, safety measures, and incidental requirements shall be deemed to be included in the quoted rates of the respective items and no extra payment whatsoever shall be admissible on this account. | |||||
| 2.00 | S & F in repair chromium plated bib tap long body with flange fixed in 15 mm bore of pipe, cast copper alloy with crutch of butterfly handle, screwed in iron pipe complete all as specified and as directed. | 15 | Each | 300 ₹4,500 Lowest | 450 ₹6,750 |
| 3.00 | S & F in repair bib tap ISI marked cast copper alloy with fancy type screwed down high pressure and screwed for iron pipe of 15mm bore complete all as specified and as directed. | 20 | Each | 200 ₹4,000 Lowest | 450 ₹9,000 |
| 4.00 | S & F in repair bib tap standard 15 mm dia of PTMT any colour for iron pipe and fixed (Minimum weight 90 gms) complete all as specified and as directed. | 80 | Each | 100 ₹8,000 | 90 ₹7,200 Lowest |
| 5.00 | S & F in repair Chromium plated Pillar tap 15 mm bore cast copper alloy with capstan heads chromium plated screwed down high pressure screwed in iron pipe complete all as specified and as directed. | 60 | Each | 300 ₹18,000 Lowest | 480 ₹28,800 |
| 6.00 | S&F in repairs stop cock ISI marked cast copper alloy, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15mm bore complete all as specified and as directed. | 50 | Each | 250 ₹12,500 Lowest | 350 ₹17,500 |
| 7.00 | S & F in repair PVC connection 15 mm dia 45 cm long with 2 Nos brass check nuts with washer complete all as specified and as directed. | 50 | Each | 30 ₹1,500 Lowest | 80 ₹4,000 |
| 8.00 | S & F in repair chromium plated Stop valve/angle valves cast copper alloy, screwed down both, high pressure, with crutch or butterfly handle, screwed both end fixed, 15mm internal bore complete all as specified and as directed. | 30 | Each | 220 ₹6,600 Lowest | 300 ₹9,000 |
| 9.00 | S & F in repair chromium plated brass overhead shower with arm 195 mm with flange with swivel joints, any size, including fixing to steel pipe or union for 15mm bore pipe complete all as specified and as directed. | 40 | Each | 250 ₹10,000 | 220 ₹8,800 Lowest |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
5 Aug 2026, 6:00 pmClosed
GE South Delhi Cantt-10
GE South Delhi Cantt-10
MAINT/REPAIR OF JOINERY ITEMS, PLUMBING, DAY TO DAY COMPLAINTS AND OTHER ESSENTIAL B/R WORKS INCLUDING PERIODICAL SERVICES AT 274 TRANSIT CAMP KHANPUR UNDER AGE B/R-I OF GE (SOUTH) DELHI CANTT-10
2026_MES_777182_1
GE/TOKEN-27/2026-27
Open Tender
Civil Works
Item Rate
180 days
GE South Delhi Cantt
As per Tender Documents
11 documents required · 11 mandatory
₹500
GE South Delhi Cantt
₹60,000
Yes
15 Sept 2026
8 Jul 2026
7 Aug 2026
8 Jul 2026
5 Aug 2026
22 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | (iv) In addition to the above, the contractor shall arrange and maintain all necessary T&P required for execution of the work, such as die sets (1/2" to 1") washers of all sizes, safeda, thread(soot) , M-seal, screws, nails, plugs, grease, putty, welding rods, portable welding machine, drilling machine with bits and the like, including necessary form work, scaffolding and safety measures complete to make the system functional and leak proof including necessary safety measures, complete all as specified and directed by the Engineer-in-Charge.
(v) The cost of all the above arrangements, obligations, T&P, consumables, labour, safety measures, and incidental requirements shall be deemed to be included in the quoted rates of the respective items and no extra payment whatsoever shall be admissible on this account. | - | - | - | - |
| 2 | S & F in repair chromium plated bib tap long body with flange fixed in 15 mm bore of pipe, cast copper alloy with crutch of butterfly handle, screwed in iron pipe complete all as specified and as directed. | 15 | Each | - | - |
| 3 | S & F in repair bib tap ISI marked cast copper alloy with fancy type screwed down high pressure and screwed for iron pipe of 15mm bore complete all as specified and as directed. | 20 | Each | - | - |
| 4 | S & F in repair bib tap standard 15 mm dia of PTMT any colour for iron pipe and fixed (Minimum weight 90 gms) complete all as specified and as directed. | 80 | Each | - | - |
| 5 | S & F in repair Chromium plated Pillar tap 15 mm bore cast copper alloy with capstan heads chromium plated screwed down high pressure screwed in iron pipe complete all as specified and as directed. | 60 | Each | - | - |
| 6 | S&F in repairs stop cock ISI marked cast copper alloy, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15mm bore complete all as specified and as directed. | 50 | Each | - | - |
| 7 | S & F in repair PVC connection 15 mm dia 45 cm long with 2 Nos brass check nuts with washer complete all as specified and as directed. | 50 | Each | - | - |
| 8 | S & F in repair chromium plated Stop valve/angle valves cast copper alloy, screwed down both, high pressure, with crutch or butterfly handle, screwed both end fixed, 15mm internal bore complete all as specified and as directed. | 30 | Each | - | - |
| 9 | S & F in repair chromium plated brass overhead shower with arm 195 mm with flange with swivel joints, any size, including fixing to steel pipe or union for 15mm bore pipe complete all as specified and as directed. | 40 | Each | - | - |
| 10 | S & F in repair brass jumper washer, brass head, face and spindle for bib cock/pillar cock/stop cock 15 mm bore any type complete all as specified and as directed. | 40 | Each | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.73 MB
BOQ_870398.xls
BOQ • 0.40 MB
SchofCreditT27.pdf
Additional Documents • 0.38 MB
TenderpagesT27.pdf
Tender Documents • 1.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .